Business area required for few invoices

Hi friends i have one issue which is as per requirement i selected business area is optional but for few invoices it is mandatory and for few invoices it not required, then i done validation it is asking business area for all invoices can i apply substution what is the procedure how it helps me
please answer i will assign points
Thanks and Regards
chennu

> Hi friends i have one issue which is as per
> requirement i selected business area is optional but
> for few invoices it is mandatory and for few invoices
> it not required, then i done validation it is asking
> business area for all invoices can i apply substution
> what is the procedure how it helps me
> please answer i will assign points
>
> Thanks and Regards
> chennu
In validation provide the conditions under which it should look for BA and conditions underwhich it should not. Substitution will not help you in resolving this to my understanding.

Similar Messages

Business area required for subcontracting GR

Dear Experts,
In subcontracting scenario while executing GR; if we enter PO number, system proposes the component.
We have expand / collapse button which allows us to see which are the materials (BOM) getting consumed for component we are receiving.
My problem is if we expand the material tree, then for each line item of sub components I need to enter business area. If the list is too big, it is very time consuming to enter business area for each component.
Request to convey me any standard setting which copies business area automatically for sub components.
Regards,
Yogesh

Dear Yogesh,
Firstly can you please check your settings in OMBW for tcode MB01
Please check whether business area is not suppressed in your system
in transactions OMCJ and OMBW and take into account that the system
fills the business area in the vendor item if a business area can
explicitly be determined from the offsetting entries. If several
business areas were used for the offsetting entries, the field in
the vendor item is not filled. Also please check whether material is
assigned to division and whether in transaction OMJ7 is correctly set.
Also, Can you please review the attached note :
      17483 : Business area for inventory postings
Can you please review the attached notes
367813 KI235 for goods movements: What should be done?
Special stocks E/Q:
   As of Release 4.5, for special stock E/Q the sales order or the
   WBS element is primarily the key for the special stock.So that
   the sales order or the WBS element is also copied as the account
   assignment, the field selection for both fields must be
   maintained (Notes 117596 and 110675).
   117596 KI235: GI from Q/E stock (Customizing) or M7073
   110675 Valuated sales order or project stock: Error KI235
Please call the transaction OMBW and ensure that the field selection for
WBS-element (Project) is set as "Optional" (instead of Suppress).
Then please retest the reported issue.
I hope this information can be of help to you.
Best Regards,
Arminda Jack

Report Writer report required by Business Area GSBER for table GLPCT ECC6

Please help,
I have a requirement for report writer report by Business Area (GSBER) for table GLPCT.
I am using Libruary PCA which has GSBER already activated
In report I am able to select GSBER in General Data Selection and generate.
However when I execute report I get error message GR410 "Characteristic GSBER cannot be combined with key figures" .
I have looked at SAPnotes 929889 1155524 and 358251, which describes solution to add field to CCSS table (structure CCR1S) however I cannot work out what structure to change for table GLPCT used in my report.
Steve
Solution was to use Libruary 8A3
Edited by: Debra Dunford on Jun 29, 2011 10:34 AM

Hi ,
If you are using the cube: 0FIAP_C20, then i guess you are using the standard extractor 0FI_AP_20 . One thing which i remember that there is a standard view in ECC : LFC1_AEDAT.
This view has two tables : LFC1 and BWFI_AEDA2.
LFC1 - Vendor master (transaction figures)
BWFI_AEDA2 - BW FI: Log Table for Changed Transaction Figures
This standard extractor uses table LFC1 to show vendor balances.
And the table BWFI_AEDA2 contains the log of the changes that has taken place business area wise and account no of the vendor wise .
Please check the view definition to confirm the same . Once you will see the joining conditions in this view you will get a clear picture of the above point .
So for your issue, you can do datasource enhancement of 0FI_AP_20 .
The logic will be based on LIFNR,BUKRS,GJAHR available from the datasource , fetch the business area from this view and populate it in your datasource .
But first check in the table BWFI_AEDA2 whether for the field BWFI_AEDA2-TABNAME= lfc1 , business areas are maintained .
Hope the above reply was helpful.
Thanks & regards
Edited by: DEADLOCKS on Apr 23, 2011 10:52 AM

What are the SAP Business one requirements for intercompany intergration

Hi. what are the SAP Business one requirements for intercompany intergration

Hi Wendy,
Intercompany 1.1 is supported on SAP Business One 8.82 and Intercompany 2.0 is supported on SAP Business One 9.0.
So depending on Solution version your are looking for, refer to Prerequisites section in the respective version's Administrator Guide.
For further information on Intercompany Integration Solution for SAP Business one, you may refer the following:
https://websmp210.sap-ag.de/partneredge/b1/intercompany
Regards,
Agneesh Jain
SAP Intercompany Team

Making Business Area required on KR KG RE

How do we make the Business Area a required field on the HEADER field of the Financial and Logistic Invoices?

Please use transaction code:
1. OB41
2. Double click on Posting Key 31
3. Next, click on Maintain Field Status
4. Double click on Additional Account Assignment
5. Select the radio button against Business Area as a required entry.
6. Save your settings.
For MIRO (Logistics Invoice Verification), use transaction code: SHD0
2. Enter transaction code: MIRO
3. Next, click on transaction variants
4. Enter your transaction variant and click on the pencil for change
5. Scroll down and make business area required entry.
6. Save your setting.
Hopes this resolves your issue.
Elias
Edited by: Elias Akorli on Sep 30, 2009 4:06 PM

What are the essential services that are required for ensuring server is healthy up ?

Hi All,
Please advise me What are the essential services that are required for ensuring server is healthy up ?
Warm regards,
jk1510

The easiest way to find the Health report of server or workstation follow the below steps which is very much easiest way to get it done
There are a few ways to find this in Windows Server 2008.
First click “Start” and type “Generate a system health report”
Or second navigate your way to the Control Panel choose “System and Security” and choose “Generate a system health report”.
The last is to type “Generate a system health report” into the “Search Control Panel” box in the upper right hand corner of the Control Panel window.
Once armed with this data it’s easier to refute or acknowledge an issue is at hand.
BTW if you’re looking for this same thing in Windows 7 it’s there just buried a bit more.
Search Performance in the Start Menu, choose “Performance Information and Tools”, click “Advanced Tools” from the menu on the left, and finally choose “Generate a system
health report”.
Ref: http://blogs.technet.com/b/rmontee/archive/2012/02/23/generate-a-system-health-report.aspx
Exchange Queries

Error: Preceding document required for the invoice is not available

Dear SRM Experts,
We are on SRM7.0 with SAP 4.6 C as backend SAP R/3 system (Classic Deployment).
When we try to create an invoice in SRM wrt a PO ( with item category B ... created from a limit SC with invoice only option), we get an error :
Line 1: Preceding document required for the invoice is not available
We are not sure ..why this error is coming and what preceding document system is checking ?
As the PO is with item category B.. the GR is not required
Any inputs will be highly appreciated..
Thanks and Regards,
Ram

Hi!
This error usually comes up when the PO has the flag GR_BASEDIV set. Please check your PO and verify if it is flagged.
Best regards,
Christian Zeuch

What settings are required for DP_PROC_TY,CT_PROC_TY,TEND_TYPE

hai friends
what settings are required for DP_PROC_TY,CT_PROC_TY,TEND_TYPE
Thanks a lot
Regards
VinayKrishna

Hi Vinay,
1. For DP_PROC_TY you need to give the transaction type or R/3 document type you want to use for creating direct material POs. Could be ECDP given in the standard or copy of which you might have created.
2. For CT_PROC_TY it is either PCTR or GCTR depending what you want to create local contract or GOA.
3. TEND_TYPE can have BID, RFCR etc depending on what type of bid invitaion you want to create form sourcing cockpit or as follow on bid invitaion.
Ragards,
RRK.
Do reward points for useful answers
Edited by: Ramakrishna Rallapalli on Jun 16, 2008 9:06 AM
Edited by: Ramakrishna Rallapalli on Jun 16, 2008 9:06 AM

BODS / SAP : what set-ups are required for communicating with each other ?

Hi.
There is a new SAP system
And there is a new BODS installation.
Both on independent server machines but on the same lan network.
On the test system of BODS. We tried to see how the communication happens with SAP.
While we try some test jobs by trying to pull a simple table on SAP R/3
In Dataflow, we used simple SAPR/3 ABAP flow. And put it into target database thro query transformation.
In the datastore,
We used the Generate and Execute option,
with a path on the local directory of BODS server for creating the ABAP program and the dat file.
However,
We are always getting error on batch job schedule.
Although the user is having rights on the R/3 table
And can login into SAP R/3 system and check the table.
Still we get an error saying Databstore unabel to connect to R/3 system. Check for user login etc.
For anyone whose login we use. We get the error.
However, if i directly generate the code on the ABAP flow (without running the job),
make the program available on R/3 system.
and then run the job as execute preloaded
this works fine without any error.
and we are able to see the data in the target table.
Now both the systems are new.
And am not aware of the initial set-ups which are required for communication between SAP / BODS.
Are WE missing something on the SAP side setups - for generate and execute option to be used?
Is there anything specific to be done for ease of the communication between SAP server and BODS server in this regard.
Can anyone share some inputs on this.
Actually for any user with full admin rights too, on the sap side, if we use the user login for R/3 connectivity for this particular "generate and execute" option, it errors out after nearly 10 minutes. Then the error says, login info not correct.
So basically, the communication channel by itself between SAP R/3 and BODS seems to be locked somewhere.
If anyone with SAP admin expertise - can help or advise on this.
Many thanks
Indu
Edited by: Indumathy Narayanan on Sep 13, 2011 9:20 PM

Getting data out of R/3 requires two distinct setup tasks, and they don't have much to do with each other.
The first basic task is to get the little ABAP extraction programs loaded and run in R/3. You can pre-load them and then call them, or generate, upload, and execute them all on-the-fly, at BODS runtime. During development, use "Generate and Execute" for your ABAP.
Once that's done, you have four different choices to get the data back: "Direct download", "Shared directory", FTP, and "Customer Transfer". Normally, you'll use either FTP or "Shared directory". Refer to the documentation (the BODS SAP Supplement) for a description of all this.
In all cases (or at least, quite certainly, using the FTP and Shared Directory methods), the ABAP extraction programs are directed to plop their output as flat files in the "Working directory on SAP server." For testing, you can look in that folder to see if any flat files are appearing when you submit an ABAP data flow. If not, then either 1) your ABAP program isn't getting in there (a Basis admin should be able to tell you), or 2) it's not running (ditto), or 3) it's running but unable to generate the output file (ditto), because a) SAP isn't permitted to write to that folder, or b) the folder doesn't exist (it needs to be defined from the perspective of the SAP server).
If you do see files appear in the "Working directory on SAP server" when you run a BODS job w/ an ABAP dataflow, then the problem is that BODS can't fetch them. If you're using the "Shared directory" method, which is suitable for and often used in all-Windows environments, then the account under which the Job Server in question is running must have access to the "Working directory on SAP server," but this time from the perspective of the Job Server. So if, for instance, SAP was directed to put the flat files on a local folder, say, "E:\USR\SAP\BODS", then you might want to share this folder out as, for instance,
sapdev1\bods (for an SAP host called "sapdev1"), and then enter "
sapdev1\bods" in the "Application path to shared directory" field, in your SAP datastore configuration. If your Job Server service is logging-in as "Local System," though, it won't be able to get there -- it needs to log-in as an AD domain account w/ rights to that share. Get it? Try logging in to your BODS job server computer with the AD "service account" setup for use by the Job Server service, and try to open a file on the "Application path to shared directory". If you can't, then BODS won't be able to get data from ECC, either. FTP works similarly -- if you're using that and having trouble, please re-post.
Best wishes,
Jeff Prenevost
Data Services Practice Manager
itelligence

Which parameters are required for generating a solution manager key?

Hello All,
I generated a key in Solution Manager, to install a SAP NW 2004s SR1.
But I receive an error during the installation from the SAPINST:
"SAP Solution manager key for the instance number... is invalid ".
I already changed the parameters for generating the key, changed the instance number, hostname, but I still receive the same error.
Could someone tell me which parameters exactly are required for generating a solution manager key?
thanks
Thomas

Dear Sri,
this is exactly what I have entered, I still get the same error message.
My entries in SAPINST:
SAPinst founds one system instance on the host with
the Instance number 00,
the Instance name SCS00.
And ask for the Central Instance parameters:
there I enter 01 for the central Instance number,
the hostname
and the solution manager key generated for the instance number 01!
best regards
Thomas

Which sharepoint service applications & services are required for Project server 2013 to work fine.

HI,
Can any one help me,
I am planning to install project server 2013, what are the service applications and Services ( Manage services on server in central admin ) in sharepoint are required for project server 2013 to work fine, so that i will run only service
application and services to increase server performance..i don't want to configure all service applications when i am configuring.
Thanks in Advance..
vijay kommireddi

Hi Vijay,
If you are installing Project Server on SharePoint farm, You need to start the service Project Application Service which would be available after you install project Server 2013.
For Project Server Reporting you need to start Excel service and Secure Store service.
http://technet.microsoft.com/en-us/library/ee662106(v=office.15).aspx
Thanks,
Phani

What SAP modules are required for insuance sector

what SAP modules are required for insuance sector

Hi,
Following authorizations are required to be able to use all the functions of Support Package Manager:
S_CTS_ADMI
S_TRANSPRT
Additional objects required and which can be used to restrict further the functionality are:
S_C_FUNCT
S_CTS_ADMI
S_DATASET
S_GUI
S_RFC
As available in the SAP help,standard SAP S_A.SYSTEM contains all necessary access for importing support packages.
Regards,
Nagendran

How to update Business area field for alread

Hi,
Recently we activated Business area financial statements in our system. After that all SD entries are showing Business area field in all SD billing-Accounting documents.
But the entries before the above change were not showing Business area since it was not activated before. But i want to update the Business area for the old documents also. so that it will be useful for me in reporting purpose.
Kindly suggest me if there is any PROGRAM to update Business area field for the old documents.
Thanks
Sunil

Hi,
Please check the OSS Note 549182 - FAQ: Business Area Accounting
https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=549182
Also OSS note 41294:-
https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=41294
Regards,
Gaurav

Which privileges are required for sql tuning advisor

Hi,
Oracle 10g
1> I want to know which privileges are required for running sql tuning advisor...
2> Some queries are taking long time.. if i run sql tuning advisor..shud i first try it out on development database or directly on prod database
Regards

1> I want to know which privileges are required for running sql tuning advisor...
As SQL tuning advisor relies on the advisor framework, so all tuning task interfaces (XXX_TUNING_TASK) require privilege ADVISOR.
http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14258/d_sqltun.htm#CACDFEBH
Some queries are taking long time.. if i run sql tuning advisor..shud i first try it out on development database or directly on prod databaseDo you mean the implementation?
Adith

What changes are required for OSS note 456507

Hi All,
PLease advise me what changes are required for OSS note 456507 (Assign the function groups QOWK or ORFC in the authorization object S_RFC to tRFC/qRFC users).
Im thinking of just going with the following additions to Role
AAAB Cross Application Auth Objects
S_RFC
Activity 16
Name of RFC - *
Type of RFC - *
But wanted to check what the implications of doing such a thing were, are there any negative points that you can think of opening up the access as above, as opposed to what was suggested in the OSS note?
Your advice would be greatly appreciated.
Thanks in Advance.
Regards,
Sandhya.

Hello Sandhya,
S_RFC is needed in case of making any RFC calls.
Normally it is needed for users that are mentioned in RFC destinations.
As such mostly these users are system/communication users or super users.
Without giving access to function groups through S_RFC successful RFC call can´not be done.
Now the value of field name of RFC can be * but only for those users which are really global super users. In case you need this authorization for any selective functionality as in you case only for function groups QOWK or ORFC then you should try to restrict the access. Negatiity is only that in case of * the authorization access increases but for system or super users you dont need to worry too much really because with system/communication users no one can login and the super users will have sap_all generally. Also their passwords will be a well kept secret so that a miususe can not be made.
By global super users I mean users which are used for various types of activites.
Please award points accordingly.
Regards.
Ruchit.

Business area required for few invoices

Similar Messages

Maybe you are looking for