Business area to be grayed out or hidden for IM program position

Hi Experts,
We want to make the business area field to be grayed out or hidden in IM program position.
We have tried to find of the Field selection for IM program position in configuration, but unfortunately we have not found out any configuration path for the same.
Then we tried to control the business area value by putting any validation / Substitution in IM program position.
But we have not found any validation or substitution for IM program in Customization.
Can you please help in the above issue ??
Regards,
Pradip Shelke

Hi,
There are no configuration nodes nor any substitution or validation available in SAP (standard) that will help in controlling the business area field. The only option available would be to look at user exits:
AAIC0001 | IM Summarization: Processing values after selection        
AAIC0002 | IM Summarization: Processing of assigned entities after sel.
AAIC0003 | IM Summarization: Definition of User-Defined Characteristics
Please note that business area is a general field that is used across modules in SAP therefore cannot be restricted via authorizations (unless all effects are considered).
Regards,
Ammar

Similar Messages

  • What causes areas to be grayed out when viewing in Acrobat 9?

    What causes text to be grayed out when viewing in Acrobat 9?
    Douments which were fine in Acrobat 9 suddenly have areas blacked or grayed out.  The same thing happens if opened in Acrobet Reader.  Is there a setting that causes this.

    It could be that the text is an image.
    Try going to Edit>Preferences>Page display>Page content and information and check the box hat says "Display large images".

  • Blank BUSINESS AREA ISSUE IN VAT OUT PUT GL

    Suppose I am creating a billing document and the entry view & GL View is like below :
    ENTRY VIEW
    1     1          100009          Vijay Sales     42,200.00          
    2     50          300101          SALES - CTV     35,555.56-     310     110310
    3     40          451005          CASH DISCOUNT     711.11     310     110310
    4     50          251409          OUTPUT VAT     4,688.89-          110310
    5     40          340099          ROUND OFF DIFFERENCE     0.01     310     110310
    6     50          300104          SALES - VCD / DVD     2,666.67-     314     101000
    In this billing doc. I have given two different types product sale in one invoice. The total VAT output is showing as 4688.89.  In this document 310 & 314 are my business area. Now if I look at the GL View of the document its like the below :
    GENERAL  LEDGER VIEW
         1     1     1          130101          Sun.Drs DEALERS CONT     333.34          110310
         1     2     1          130101          Sun.Drs DEALERS CONT     39,199.99     310     110310
         1     3     1          130101          Sun.Drs DEALERS CONT     2,666.67     314     101000
         2     4     50          300101          SALES - CTV     35,555.56-     310     110310
         3     5     40          451005          CASH DISCOUNT     711.11     310     110310
         4     6     50          251409          OUTPUT VAT     333.34-          110310
         4     7     50          251409          OUTPUT VAT     4,355.55-     310     110310
         5     8     40          340099          ROUND OFF DIFFERENCE     0.01     310     110310
         6     9     50          300104          SALES - VCD / DVD     2,666.67-     314     101000
    Now Just see at the document. The Business Area is capturing correctly in VAT output for the first sale. But the VAT out put for Second Sale, the business area is blank. Where as the B.A. is perfectly capturing in case of both sales.
    It is the same scenario if Iu2019ll take n-number of products in an invoice. Only first productu2019s B.A. is capturing in the VAT output, while in others its showing blank.
    So kindly suggest me why is it so? & how can I show the B.A. in every VAT out put GL for n-number if Transaction in one invoice.
    kindly send the solution in rnarayan @ videoconmail.com
    Regds,
    R. Panigrahi

    See OSS note 199886 - Business area in tax line:
    Cause and prerequisites
    Postings to VAT accounts must be made without business area. The reason for this is that the field "Business area" does not exist in the tax data. Therefore,the advance return for tax on sales/purchases can also only generate postings without business area and these postings must correspond exactly to the original tax postings in your account assignments. Otherwise, the tax accounts would have steadily increasing business area balances.
    Solution
    You can use function "Balance Sheet Adjustment" (report SAPF180) to display taxes in the balance sheet for business areas.

  • HT4914 Whey are my songs grayed out in iTunes and how do I get them back?

    Whey are my songs grayed out in iTunes and how do I get them back?

    See this..
    http://support.apple.com/kb/HT2519
    This may be of use too..
    https://discussions.apple.com/docs/DOC-3141

  • How many softwares are there to create a setup file for java programs

    Hi, i am new to java
    I want to know how many softwares are there to create a setup file for java programs.
    I know one software i.e java launcher to create a setup file.
    I want to know about any other softwares are available to create a setup file for java programs.
    I created a setup file for swings program in JCreator.
    And don't think that i am wastiing ur time with this question .
    Help me regarding this topic.
    Thanks in Advance

    superstar wrote:
    I want to know how many softwares are there to create a setup file for java programs.13, no wait, 42.
    I know one software i.e java launcher to create a setup file.You should clearly identify what you think you already know.
    I want to know about any other softwares are available to create a setup file for java programs.
    I created a setup file for swings program in JCreator.Is this the one you talked before, or is this different?
    And don't think that i am wasting ur time with this question .Why should I not think that?

  • Why when I drag photo from bridge into existing document, it opens with an X through it? Most of my functions are then grayed out. Thanks for any help.

    why, when I drag a picture from bridge into PS, to an existing document, I get N x THROUGH TH
    E PICTURE AND MOST OF MY FUNCTIONS are grayed out?

    It is opening as a smart object. Simply right click on the image in the layers panel and "Rasterize Layer" when you are finished placing and sizing the new image.
    Benjamin

  • Why are the brushes grayed out

    I am having a hard time using brushes in Aperture 3.  When I imported photos from iPhoto....and then go to edit these using brushes....all the options are grayed out except for the retouch option.  Help!

    It's likely that you have 'Preview' enabled, click 'P' and it should be good to go.

  • Why are the aps grayed out when syncing my iPhone?

    When trying to sync my wife's iphone with my iMac, the aps on her iphone are grayed out and the phone will not sync,
    even though all the aps on her phone are the same as the ones in my iMac.

    OK. So we've established that you're in Photoshop CC on Windows 7 (nothing to do with Acrobat or Acrobat Reader).
    What exactly are you trying to do in Photoshop CC? Can you outline in detail what steps you're taking and what's confusing you?

  • Why are the options grayed out??

    Why are the majority of my edit options grayed out.  I cant copy and paste

    OK. So we've established that you're in Photoshop CC on Windows 7 (nothing to do with Acrobat or Acrobat Reader).
    What exactly are you trying to do in Photoshop CC? Can you outline in detail what steps you're taking and what's confusing you?

  • Why are duplicate titles grayed out but shown downloading?

    I have an album downloaded from iTunes that shows duplicate titles of each song when looking on my iPod Music on my computer. These titles are grayed out and include the downloading symbol. I have deleted them several times but they always come back. What is going on?

    Ann, thanks so much for trying to help me. I'm a novice and you might just want to give up....
    I'm using CS4, have installed the contact sheet II feature since I was familiar with it. Just now tried your suggestion and was able to get all 9 pix as far as output preview in Bridge.
    Here are the instructions that I'm following and had followed once before successfully while using CS:
    http://www.youtube.com/watch?v=VKbUM5NLJ_g

  • HT201240 why are my users grayed out?  I cannot edit the users

    I have set up my users with their respective passwords but i am not able to delete or edit the users because they are grayed out and it shows managed on each of them.

    Did you click the padlock at the bottom?

  • Item Category Grayed Out (Not Available for Input)

    Hi Experts,
    I want to know SAPs logic for graying out it. cat. field (PSTYV) when entering an Order. Item category  cannot be changed while creating an order once its determined. How & why does SAP grays out it. cat. field and under which circumstances.
    My case: I have a configurable item and based on this item subsequent item and its it. cat. is determined, once SAP determines second item it is graying out it. cat fields on both items. Though in configuration I have manual it. cat. maintained for both items along with dependancies. Any info on this matter will be greatly appreciated.
    Thanks

    Hi Ron,
    Please refer to note 208245 as it has the answer of what you are looking for & possible workaround solution to meet your business requirement. Otherwise, please do not hesitate to update this forum.
    Thank you.
    Best regards,
    Huey Chin

  • Need to disable/Grayed out Unreseve button for Order lines

    Hi All,
    In Back to Back order process once the order is progressed, the requisition will be created and Quantity will be reserved for PO to be received.
    Some of our users want go and Unreserve this by the below methods.
    1) Tools --> Scheduling --> Unreserve
    2) Right Click on the order line --> Scheduling --> Unreserve
    We need to Disable or Grayed out this Unreseve option for ATO Flagged lines.
    Can anyone let me know if this is possible.

    Ok , Ned , well your Guidance really worked , thanks alot for that.
    I made it work , though since i am very new to AS3 , i really had to experiment , here is the final Code :
    import flash.events.MouseEvent;
    stop();
    var note1:Mc_Notice1 = new Mc_Notice1;
    var note2:Mc_Notice2 = new Mc_Notice2;
    var notes:Array = [note1,note2];
    //var count:Array = new Array(1);
    var count:int;
    count = 0;
    btnload1.addEventListener(MouseEvent.CLICK , load1);
    btnload2.addEventListener(MouseEvent.CLICK , load2);
    function load1(Event:MouseEvent):void
      addChild(notes[0]);
      notes[0].x = 100;
      notes[0].y = 100;
      count ++;
      trace("Counter Value:" + count);
      if ( count == 2)
      btnnxt.addEventListener(MouseEvent.CLICK , nextframe);
    function load2(Event:MouseEvent):void
      addChild(notes[1]);
      notes[1].x = 100;
      notes[1].y = 100;
      count ++;
      if ( count == 2)
      btnnxt.addEventListener(MouseEvent.CLICK , nextframe);
      trace("Counter Value:" + count);
    function nextframe(Event:MouseEvent):void{
      trace("Mouse Enabled");
      nextFrame();
    Once again , Thanks alot for the help and Guidance
    Best Regards

  • What are the steps doing a performance tuning for pertcular program

    What are the steps doing a performance tuning for pertcular program

    chk this link
    http://www.thespot4sap.com/Articles/SAPABAPPerformanceTuning_PerformanceAnalysisTools.asp
    checkout these links:
    www.sapgenie.com/abap/performance.htm
    www.sap-img.com/abap/ performance-tuning-for-data-selection-statement.htm
    www.thespot4sap.com/Articles/ SAPABAPPerformanceTuning_Introduction.asp
    Message was edited by: Chandrasekhar Jagarlamudi

  • What Are The Correct Gray OS X Discs For This Imac?

    I got a free 700Mhz G4, 15" Screen, 512mb Ram, 40GB HDD and I was wondering what are the correct OS X discs (Gray) that came with this Mac?
    There has to be a serial or model number right? I have Leopard installed on it and I missing having the DVD player so could I connect the iMac to my PowerMac G5 using Target Disc Mode, and then install Panther or Tiger onto the iMac through it?

    Liquidus wrote:
    I got a free 700Mhz G4, 15" Screen, 512mb Ram, 40GB HDD and I was wondering what are the correct OS X discs (Gray) that came with this Mac?
    The correct Mac OS restore discs are Mac OS X 10.1.2 and Mac OS 9.2.2. I have restore discs for a 600MHz Late 2001 iMac G3, which has the same identical software as the iMac G4. That part number for the disc set is 603-0372.
    For the second part of your question, you can install Panther or Tiger through Target Disc Mode from your PM G5.
    -Brian

Maybe you are looking for