Business area wise vendor balances report in S_ALR_87012082

Hello Friends,
In a Vendor Balances report, the document selection is not available in the dynamic selections and hence i am not able to select the business area to suit the requirement. We have only, vendor master and company code in the dynamic selections.
Is there any customization tht needs to be set???
Thanks,
Sunny

hi suny,
In F.42 also i can see the Business area.
Go to Edit tab and click on Dynamis selections in Document u can see the Business area tab. Double click on it, so that it will move to the right side of the screen, from there u can select it......
assign me the points.....
ranjit

Similar Messages

Business area wise vendor Balance

Please i want to know the tcode for Business area wise Vendor Balance, and Customer Balance.
Thanks in Advance,
Anand

Hi,
Vendor balances : Go to T.code S_ALR_87012093 Or S_ALR_87012079 - Vendor Business and click on Dynamic selections(Shift+F4) double click on Business Area and put on the business area and save then Execute (F8)
Customer Balances : Go to T.code S_ALR_87012186 Or S_ALR_87012169 - Customer Sales and click on Dynamic selections(Shift+F4) double click on Business Area and put on the business area and save then Execute (F8
Thanks,
Raviteja
Edited by: Ravi Teja.T on Jan 4, 2012 12:29 PM

Business area in vendor balances report

Hello All,
In ecc 6.0 is it possible to show FI related fields like business area , document number , gl indicator in Report f.42(vendor balances in local currency).
In 4.7 it was allowing to do (these options was available in standard report only) but is it possible in ECC6.0?
Regards,
Sunny

NED

Customisation for business area in vendor balances

Hello friends,
what is the customisation tht needs to be configured to make business area option available in dynamic selection tab in vendor balances report like f.42
I want to show business area wise vendor balances report.
Pls let me knw the path to do it.
Thanks
Sunny

I am also facing the same problem. I need business area wise vendor balances. However as a temporary solution, I have used
S_ALR_87012079 - Transaction Figures: Account Balance for the business area wise transactions to ascertain the business areawise balances.

Business Area wise Vendor & Customer Line item report

Hi
We are on SAP ECC 6. Can I get Business Area wise Vendor & Customer Line item report (as like FBL1N)
Regards
Debojyoti

Hi,
In FBL1N in dynamic selections you can give the business area as the selection parameter otherwise after execution of report with the help of layout you can set filters for business area.
Go to FAGLB03 give the vendor or customer reconciliation account along with business area. So after you execute the report you can choose vendor code and business area.
Check once it may help you
Regards,
Sankar

Business Area Wise open PO report

Dear Experts,
Our user need the Business Area wise open PO report if there any standard report so please let me know.
waiting fast response.
Regards
Aamir

hi suny,
In F.42 also i can see the Business area.
Go to Edit tab and click on Dynamis selections in Document u can see the Business area tab. Double click on it, so that it will move to the right side of the screen, from there u can select it......
assign me the points.....
ranjit

Difference in business area wise trial balance

Dear all,
can anyone explain me how to deal with difference in business area wise trial balance?
Please send me the user manuals of balance sheet adjustment(Tcodes - F.5D, F.5E, F.5F and F.5G)
I will assign you full points.
My mail id is [email protected]
Thanks & Regards,
A.Anandarajan.

Hi.
For running F.5D, F.5E, F.5F and F.5G, you need to make customization settings. The t-code for making the settings is OBXM. Here you specify a business area adjustment account which is the master account, Thereafter you have to specify adjustment accounts for G/L, AR, AP Taxes etc. Once you do these settings, you can execute F.5D, F.5E, F.5F and F.5G.
Regards,

Business area wish Trial balance report

hello
In my client They have done all the posting business area wish (In the Company the business area it is nothing but regional office in other city) when they want to tally the regional office wish Trial balance see but the business area wish trial balance is not tally what we do pleases tell me I think one option is hear business area wish reconciliation but I donu2019t know please tell me business area wish reconciliation process << Moderator message - Everyone's problem is important >>.
Thanks
Edited by: Rob Burbank on Oct 27, 2010 4:00 PM

Hello sir
I set the all configuration but still we have problem , what we do they want to make the Business area wise Trial Balance and it will be match and it is not possible to Business area wise posting there trial balance become a match I think so , what we do << Moderator message - Everyone's problem is important >>
Thanks
Edited by: seemacg on Oct 27, 2010 8:13 AM
Edited by: Rob Burbank on Oct 27, 2010 4:01 PM

Business area wise vendor list

Hi ,
I wish to see the vendor balance business area wise in FK10N. can anybody tell me how to see this ?
Thanks

Hello,
Please follow the following method to get vendor balances business area wise.
In Tcode FBL1N click on dynamic selection icon. This is at the left hand side toppart of FBL1N screen. From there click on business area field and it will appaer as dynamically selected field on screen.
Now in the FBL1N screen put the value of business area for which you want to see the vendor report.
Please assign points and close the thread.
Rgds
Manish

Problem in dynamic selection in vendor balance report tcode S_ALR_87012082

Hello Friends,
After upgrading from 4.7 to ecc 6.0 we are facing the below mentioned problem.
In a Vendor Balances report, the document selection is not available in the dynamic selections and hence i am not able to select the business area to suit the requirement. We have only, vendor master and company code in the dynamic selections.
Is there any customization tht needs to be set???
Thanks,
Sunny

Hi Vas,
I am not sure..... but you can view the details in "S_ALR_87012079", you need to chnage the layout....
If the hint is useful Say thanks by reward.
Regards,
Prabhu Rajesh

Business area wise opening balance of customer.

Dear Guru's
How to get the opening balance of Customer account, Business area wise. I have to prepare report on cutomer account balance based on business . I am getting the balance on the basis of company code from KNC1 table.but I am not able to get balance based on business area, can any body help me... it is Urgent
With Regards
Mahesh

Dear Madhuri
That i know, but i need to prepare a report, customer details based on Business Area for that i need to get a opening balance of customer based on business area.so i needed from which table i will get the balance of customer based on business area.
Please help me yaar....
it is urgent.....
thanks for ur replay
i am expecting a good solution from You.
With Regards
Binoj

Business Area wise Trial Balance

Hi,
I have configured the Business area wise balance sheet in OBY6 setting and i have made configuration in OBXM for the balance sheeet adjustment.
When i am running F.5D and F.5E, it is not balancing the Debit and Credit Indicator in Trial Balance. We have implemented Business Area in running business this fiscal year. There is no business area past data (2004 to 2010) data.
Kindly suggest what could be the reason for the same.
Thanks ...

Hi
If the document split is enabled you can't run the F.5D and F.5E
regards,
Sanju M S

Business area wise Trail balance is not showing balance

Dear all ,
I am facing problem in f.08.
We have 5 company code ,8 Business area, We have Activated Business area wise Balance sheet in OBY6.and assigned Plant division and Valuation area .
I am activated document splitting, Here also i maintained Business area and Profit center is mandatory field.
when i saw the business area trial balance gl balance is not showing its giving error" no list generated."
Kindly suggest me what is the setting we missed.
Thanks and Advance.
Girish.

Hello,
I think, you did not set "Assign Scenarios and Customer Fields to Ledgers" customizing on SPRO.
Financial Accounting (New) -> Financial Accounting Global Settings (New) -> Ledgers -> Ledger -> Assign Scenarios and Customer Fields to Ledgers.
You must define FIN_GSBER to scenarios for ledger "0L".
Then system fills business area on table FAGLFLEXT.
But unfortunately can not correct older data.
Regards,
Burak

Business Area wise Vendor Entry

Hi,
When a PO is raised and an IV created, we get the following FI entry
           Business Area     Dr     Cr
Expense A/C Dr           1     100
Expense A/C Dr           2     100
Expense A/C Dr           3     100
     To Vendor A/C                       300
Now, we have requirement that all the postings to the Vendor A/C should be traced w r t to Business Area. Eg
           Business Area     Dr     Cr
Expense A/C Dr           1     100
Expense A/C Dr           2     100
Expense A/C Dr           3     100
     To Vendor A/C           1           100
     To Vendor A/C           2           100
     To Vendor A/C           3           100
I would be glad if somebody can let me know the configuration we need to do in order to make this possible.
Waiting for your reply at the earliest.
Thanks & Regards,
Gaurav

Hi,
Vendor balances : Go to T.code S_ALR_87012093 Or S_ALR_87012079 - Vendor Business and click on Dynamic selections(Shift+F4) double click on Business Area and put on the business area and save then Execute (F8)
Customer Balances : Go to T.code S_ALR_87012186 Or S_ALR_87012169 - Customer Sales and click on Dynamic selections(Shift+F4) double click on Business Area and put on the business area and save then Execute (F8
Thanks,
Raviteja
Edited by: Ravi Teja.T on Jan 4, 2012 12:29 PM

Vendor balance Business area wise

Hi
I have one requirement to vendor balance business area wise
for this report I have taken 0FI_AP_3 data source and 0FIAP_O03 ods
I have the fileds in target '0DEB_CRE_LC'
vendor cumulative balance business area wise given fiscal year period
what are the maintained in R/3 transaction code is "FK10N"
how can i deging in Bex designer
plz advise me
rgrds
smitha
Edited by: sonalismita on May 11, 2009 3:17 PM

Hi sonali,
For that,
Drilldown report on Venodr, so put characteristic in Row.
In colum for opening balance, create a calculated keyfigure where fiscal year period LT 'Selected period'. which is balance.
For Closing balance, create a calculated keyfigure where fiscal year period LE 'Selected period'. which is balance.
For Debit and credit colum. create calculated key figure and restrict fiscalyear period = "selected period", with debit credit indicator = 'H' and 'S'. respectively.
Regards,

Business area wise vendor balances report in S_ALR_87012082

Similar Messages

Maybe you are looking for