Business Catalyst DOESN'T work as Advertised with Creative Cloud account

Question, I have a Creative Cloud, and I CAN'T publish web site that has a Business Catalyst features, why? As a designer I want to have a fully featured LIVE web site, that I could demonstrate to the clients, but instead I have limited useless webBasic.
I spent a lot of time developing that Business Catalyst featured web site, hopping that I could make it live with my Creative Cloud account, but I can't. Why you advertised that we could have up to 5 web site on business catalyst, if we can't?
I really don't wanna go to X-Cart or Magento Go, after I spent so much time learning BC features, at least give us a 1 fully featured BC website with Creative Cloud Account

http://forums.adobe.com/docs/DOC-2153
Everywhere I read it was always Webasic.
Where did you read it would be otherwise?

Similar Messages

  • LR-CC wont work after install with Creative Cloud. I run a 64 bit W7 system

    HI,
    LR-CC wont work after install with Creative Cloud. I run a 64 bit W7 system.
    I had LR 5,7 running and was not installed via the CC.
    What to do
    Thanks.

    Hi Ridder,
    Please refer the solutions given in the following article.
    Lightroom doesn't launch or closes automatically after splash screen
    Hope this helps.
    Regards,
    Sumit Singh

  • Installing AI with Creative Cloud account - still says trial.

    When I try to activate my AI through my CC acct it still thinks that it is a trial version. I have an annual $49.99 CC plan, so can I use AI too?
    Thank you.

    Thanks for the tip, but I still can't find where to resolve this problem.
    Is there a specific link within the page you mention?
    2014-10-16 16:25 GMT-07:00 Jeff A Wright <[email protected]>:
          Adobe Community <https://forums.adobe.com/?et=watches.email.thread>     Installing
    AI with Creative Cloud account - still says trial.
    reply from Jeff A Wright
    <https://forums.adobe.com/people/JeffAWright?et=watches.email.thread>
    in Trial Download & Install - View the full discussion
    <https://forums.adobe.com/message/6838002?et=watches.email.thread#6838002>

  • HomeGroup Doesn't Work As Expected with Same-Named Accounts

    Hello Community,
    I am running into problems configuring HomeGroup with my collection of Windows 8.1 machines.
    I have 3 Microsoft Accounts:
    Personal: [email protected]
    Business 1: [email protected]
    Business 2: [email protected]
    I have these 3 accounts added on two machines:
    Machine A: Personal/Business 1
    Machine B: Business 2
    All 3 have the same first and last name.  So, when all 3 join Homegroup, there is only 1 node in explorer ("First Last", with the icon being from the live.com account, for whatever reason), and 3 nodes under that with the machines the accounts
    are on.
    The problem I am running into (besides there just being 1 node in home group, there should be 3 -- 1 per account, IMO) is that sharing libraries from Machine A\Business 1 does not show up properly in the Explorer of Machine B\Business 2.  For instance,
    if I share the Documents Library, it displays in the Machine B\Business 2's explorer, but when I double-click it, it doesn't do anything.
    Furthermore, if I explicitly share Machine A\Business 1's Document's folder (not library, the folder), the folder does show up in Machine B\Business 2's explorer, but when I double-click it, it produces an error dialog saying it cannot navigate
    to "C:\Users\Business1\Documents".
    It appears that when Machine A\Business 1 shares items, the shares are being logged into Homegroup as local resources, and not network resources.  So, when another user attempts to access them, they are being accessed with a local path rather than
    a network path.
    Is this a known issue?  If so, is there a workaround/fix for it?
    Thank you for any assistance you can provide,
    Michael

    Hi Michael,
    I cannot repro your issue in my environment. Did the share from your personal account on Machine A work fine?
    Would you please test if the share from your business 2 on Machine B work fine? Let me know your test results.
    Meanwhile, let’s try to recreate the homegroup and rejoin your computer to check the results.
    If the issue only happened on business 1 account, please follow these steps to capture the behavior during the share and access process as you mentioned in your post by using Network monitor. If you find any error or unexpected communication
    issue, please post back the log.
    Microsoft Network Monitor 3.4
    http://www.microsoft.com/en-us/download/details.aspx?id=4865
    Analyzing Network Data with Network Monitor
    http://technet.microsoft.com/en-us/library/cc723623.aspx
    Hope these could be helpful.
    Kate Li
    TechNet Community Support

  • STP just doesn't work as advertised

    So here's my question:
    Is anyone out there using this app having the amount of misery I'm having? Does STP seem half baked at this point of its development? It certainly does to me.
    I sincerely hope Apple is planning a major update to STP real soon, because frankly, (IMHO) this app just doesn't work as advertised. I am now giving up trying to mix 9 episodes of a show because I can no longer work around the litany of bugs in this program.
    This is a major disappointment, and I hope the product manager for STP is listening and moving forward to take corrective action ASAP.

    Hello Todd,
    Where do I begin? Well, let me preface by saying that I feel like I've given STP a fair shot at the show I'm working on (six weeks now). But almost everytime I run into a problem and present it to knowledgable STP users, they reply with "Uh, yeah, I think they know about that one - hopefully there'll be a fix soon".
    But here goes with a small sample of bugs - and features that SHOULD be in this app. If you can solve any of these issues, I'd be appreciate it!
    - STP will refuse to save a file in the waveform editor if the ORIGINAL filename contains certain (illegal?) characters. Even if you change the name of the file TO BE SAVED to something which "should" work fine, it still won't save. I spent many days tracking this one down because STP gives you no indication as to why it won't save the file.
    - STP will not allow you to perform FADES to/from silence in a MULTI-TRACK project (it will allow this in the waveform editor). This forces you to create keyframes on the VOLUME envelope (which requires numerous mouse clicks) to achieve the desired result.
    - Sometimes, all the faders and pan controls on the MIXER go grey, preventing any adjustment. The only work around is to recall a user layout (again, took a few days to figure this one out).
    - STP will not RELIABLY playback REALTIME EFX on tracks or busses. Often, EFX are simply skipped over (not played back), or they playback incorrectly.
    - The ON/OFF parameter of EFX cannot be mapped to AUTO (keyframe) envelope. This is a real pain because you may want to simply turn an effect ON or OFF based on time, without having to adjust other parameters of the effect to achieve the same result.
    - STP offers no easy way to navigate (SNAP) to the HEAD or TAIL of a clip on the timeline from the keyboard. The SNAP feature via the mouse is useless in this regard unless your zoomed all the way in.
    - STP offers no way to move clips in the TL in user designated increments.
    - When applying keyframes to a clip (for volume or pan as an example), STP requires that you manually add keyframes to the beginning and end of the clip - which takes way too long. There should be a way to highlight a clip(s) and with one keystroke, have it add keyframes to the HEAD and TAIL of every clip that was highlighted.
    - STP will sometimes report that it cannot playback all the tracks because of bandwidth issues, even when you've got a RAID that will support uncompressed HD/1080i bandwidth.
    - STP's screen refresh is agonizingly slow compared to Protools (for example), even when Protools is running on a MUCH slower CPU with far less RAM. Expanding/contract the timeline or tracks is "steppy" and slow.
    - STP will not warn you if you're overwriting a clip when dragging from the browser. For example, if you have a clip on TRACK1, and you drag a sound effect from the browser to TRACK1, but it's length is so long that it will overwrite clips that may be out of your view, you have no idea that those clips are now gone or truncated. STP should warn you, and/or allow you hold down a modifier key that forces the clip to fit into the available empty space only.
    - STP offers no way to easily copy an effect from one track to another from the mixer. Why can't I click and drag an effect from one fader to another to copy the effect with it's current settings?
    - Where are the user adjustments for metering ballistics? Reference levels?
    That's it for now!
    All the best.

  • The backlight of keyboard doesn't work in win7, with a well setup bootcamp drivers

    The backlight of keyboard doesn't work in win7, with a well setup bootcamp drivers

    Forum and support for Boot Camp:
    http://www.apple.com/support/bootcamp

  • I have a creative cloud membership.  If I don't want to build a site in Muse, can I build a business Catalyst site and have hosted free with my creative cloud membership?

    I have a creative cloud membership.  If I don't want to build a site in Muse, can I build a business Catalyst site and have hosted free with my creative cloud membership?

    Yes you can! It is a Basic level site but you can build it without Muse. I think you may need to create the site originally with Dreamweaver or Muse (meaning creating the site with Business Catalyst not building the site) but once that is done you can use any software to create the code for the site and upload it via SFTP. Hope that makes sense.

  • Is anyone else having trouble with Creative Cloud Tonight? ALLLLL Applications are down. None are working.

    I have verified with at least 5 other people that all their applications are down and no one can sign in to the creative cloud on their desktop. I am experiencing the exact same thing. It started with Lightroom and then just stopped. I was able to just log into photoshop, but i can confirm lightroom is def not working any longer after the upgrade 2015 the other day. its horrible.

    I can still launch applications, but for some reason the CreativeCloud app is hung on a network request.
    I was able to force quit the Creative Cloud app, then relaunch it, and it is working.
    Lightroom and Photoshop launch, but LR is hanging for about 20 seconds in the splash screen (when it normally does not).
    So yes, there appears to be some sort of network/server issue with Creative Cloud right now.
    But I can't find any errors listed in their status pages, so it may only be a slowdown due to a network issue outside the servers.

  • I want to work with Creative Cloud -Libraries but I can`t find Libraries in Windows menu. What to do?

    I want to work with Creative Cloud -Libraries but I can`t find Libraries in Windows menu. What to do?

    Berit, please specify the OS version and software in which you are trying to find library?
    Make sure you your software is updated to the latest version. Try to reset the preference of the software as mentioned below:
    Photoshop Help | Preferences
    InDesign Help | Setting preferences
    Illustrator Help | Setting preferences
    Let us know if you are still not able to see Library panel in any specific software.
    Atul_Saini

  • Creative cloud installed and run but doesn't display apps or anything for that matters , only a black bar at the top with creative cloud written and a drop down menu of (help pin on notification area and quit ), creative cloud installed and run but doesn'

    creative cloud installed and run but doesn't display apps or anything for that matters , only a black bar at the top with creative cloud written and a drop down menu of (help pin on notification area and quit ), creative cloud installed and run but doesn't display apps or anything for that matters , only a black bar at the top with creative cloud written and a drop down menu of (help pin on notification area and quit )
    don't know if it's relevant or not , I run Windows 8 64-bit

    111994 please try utilizing the steps listed in App doesn’t open | Progress wheel spins continually to resolve the current error.

  • How do we work with creative cloud on a citrix platform?

    We are licensed creative cloud users. How do we work with creative cloud on a citrix platform?
    we have architects who work on revit but they need to access creative cloud suite whilst still in Revit via citrix server.
    How does she do that? please does anybody know?

    Contact Adobe. Creative Cloud is working fine here with 10.9.1.

  • Does a laptop with Intel HD 4400 graphics work with creative cloud software, or do I NEED Nvidia or AMD?

    Does a laptop with Intel HD 4400 graphics work with creative cloud software, or do I NEED to have Nvidia or AMD graphics

    Creative Cloud has MANY programs Explore Adobe desktop apps | Adobe Creative Cloud so the answer is most likely going to be specific to the program
    Work... yes... work WELL with something like Premiere Pro... no

  • It's my last month with Creative Cloud and the suscribtion doesn 't appear on my account thus I can't cancel .What to do?

    It's my last month with Creative Cloud and the suscribtion doesn 't appear on my account thus I can't cancel .What to do?

    I already own Production Premium CS6 but I suscribed last year for a combo Photoshop and Lightroom package. The Production Premium appears on my page but not the sucribtion .How can I cancel it .My last month is in December and they just want me to go for another year .Thank You for your help

  • Hi there, I couldn't find out on the Adobe site, how much an upgrade to include web commerce through Business catalyst is? (I have a standard design cloud membership. Help pls...:-)

    Hi there, I couldn't find out on the Adobe site, how much an upgrade to include web commerce through Business catalyst is? (I have a standard design cloud membership. Help pls...:-)

    Hi
    You can check the BC pricing here
    US Yearly Pricing | Adobe Business Catalyst

  • Downloading Photoshop with Creative Cloud...

    I am trying to download Photoshop CS6 with Creative Cloud, after purchasing Creative Cloud full version. However, when it takes me to Adobe Manager it says Photoshop is 'up to date' and doesn't allow me to click the 'install' option as the others. I have downloaded and carried out a 30 day trial on Photoshop CS6 previously, so don't know if this has affected installation. I am also unsure if I am properly connected with the Creative Cloud, after purchasing Creative Cloud on Tuesday 2nd April. As when I go to order status it states it is shipped and with 'download' option, which takes me to the Adobe Manager, where I then face the problem stated above.
    Please advise how I can resolve this issue and download/ install the full Photoshop CS6 version onto my Mac. 
    Thanks,
    Rachael

    funny that the first option is to uninstall the up-to-date program in question, when the title of the article states the problem to be that the program is not installed to begin with. It's very hard to uninstall a program that isn't there!
    number two didn't work, and i've tried number three more than a few times. I'll get to number four today (the cleaner). I suspect that the manager is not uninstalling OR installing correctly. It just spins on the home tab, and never fully uninstalls, though that could just be sloppy programming. I always have to go into the task manager and stop a process manually. Last time, i tried extracting it from the registry prior to reinstall, but that didn't work either. I have no current or previous installations of the "up-to-date" program on this drive. But i did have CS5 designer suite installed on the previous drive C, which is now drive E. Could that be the problem? Drive C is a brand new SSD, the motherboard was just replaced and windows was reinstalled onto a clean drive, the same drive to which i am installing CC manager.
    so i'll try the cleaner today. Finger's crossed! Thanks.

Maybe you are looking for