Business completion of orders iw38 -exclude orders with DLFL equipments

Hi ,
I want to do mass business completion of orders using IW38 .But I want to exclude orders which are having refernce equipment marked for deletion . How can this be achieved .
NPB

Hello!
Please do following steps:
1. Run IW38 report with selected time period with system status TECO.
2. Copy all equipments from IW38.
3. Pass all equipments in IH08.
4. Put filter in system status and copy equipments without DLFL.
5. Now again run IW38 with same time period and paste list of equipments in the selection criteria.
6. This time you will get list of orders which contains equipments without DLFL.
7. Do mass Business completion.
Regards,
Vaibhav Mishra

Similar Messages

Business completing PM Order

When I business complete a PM order 'X', I get following message -
Maintenance Item Y is assigned to X
Maintenence item Z is assigned to X.
The maintenance items Y & Z have order X as settlement receiver in the sttlement rule. These maintenence items are used in a maintenence plan, this plan has only these 2 maintenence items.
What can be done.
Should I set deletion flag to the maintenence plan?
Please advise

Hi,
I think orders from Maintenance item Z and Y are suborders and are assigned to order X . You can first settle Orders from Z and Y maintenance Item and then settle Order X and then do business completion of Order X .
Regards
pushpa

Cannot complete an orders with Commsec. Thw browsewr stalls when "Proceed" is clicked.

I cannot complete an order to BUY with Commsec. The browser stops at the command "Proceed". It will work with Internet Explorer. I have uninstalled Firefox and downloaded a fresh copy. No luck.
Running Windows 7 on Bootcamp on a Macpro. desktop.

I cannot complete an order to BUY with Commsec. The browser stops at the command "Proceed". It will work with Internet Explorer. I have uninstalled Firefox and downloaded a fresh copy. No luck.
Running Windows 7 on Bootcamp on a Macpro. desktop.

Business completion for bulk orders

Hi all,
we have not done the business completion for orders for the last 6months and we need to complete it at a time.will it possible to do business completion for all the orders at a time?

Hi,
Check in IW38 , enter ur order types , plant , in IW38 at Top select Processing option and then execute ..
Ensure that all the orders r settled , no actual cost left on the orders & all the invoice payements done from MM side else u will get problem while doing business completion ..
You can also check this link http://sap.ittoolbox.com/groups/technical-functional/sap-log-pm/business-closure-of-maintenance-orders-2492726
regards
pushpa

Help with Complete My Order for deluxe/standard albums...

I bought some songs on Miley Cyrus's album Bangerz, but I realized the bonus tracks on the deluxe version are good and I want them too, but I go to buy the whole deluxe album with Complete My Order, but since I bought some songs on the standard version, it just says I have those songs Purchased on the deluxe one. Can I re-buy those songs through the deluxe album? Will the "purchased" songs be downloaded again if i complete my order with the deluxe version? I'm so confused, and I don't want to just buy the bonus tracks on the deluxe and still have the other songs from the standard version because I'm extremely OCD with my albums and I don't want 2 Bangerz albums in my library.

Hello mbaumgardner97,
Thank you for the question! It sounds like you are wanting the bonus tracks on the deluxe version of this album but you recently purchased the normal version and so cannot use the Complete My Album function. You may be able to report a problem to our iTunes Store support directly about this using the following article:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
http://support.apple.com/kb/ht1933
To report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase, follow these steps:
Find the email receipt for your purchase.
Click Report a Problem under the app that is having the issue.
When prompted, enter the Apple ID and password you used to purchase the item, then click Report a Problem.
Click Report a Problem next to the item you are having an issue with.
From the Choose Problem dropdown menu, choose the appropriate issue.
Follow the onscreen instructions and—if prompted—type a description of the problem into the text field.
Click Submit to have your issue reviewed.
Thank you for using Apple Support Communities.
All the very best,
Sterling

Business Completion Importance

Hi Expert,
Can anyone explain about maintenance order "business completion" importance?
Why business completion need to done after order settlement? and what the impact(s) that might happen if we do not perform business completion?
Please help
Thank you
Rgds,

Hi Micheal
Business Completion is done to ensure that no more costs are expected for the Order & it is financially closed
After Business Completion , the Order cannot receive any further postings
It is a requirement from Controlling view point.
For more clarifications / understanding kindly refer [here |http://help.sap.com/erp2005_ehp_03/helpdata/EN/5b/ae39634b8611d182ba0000e829fbfe/frameset.htm]
Regards
Jignesh

Can not see the ICON of Complete Order (Business Completion) in the IW32.

Hi All,
          I want to Complete the Maintenance Order (Business Completion) but I can not see Icon - Complete Order. to complete the Maintenance Order. I understand Order --- Function -
Completion path can be used for competeion but it is disabled.
          For Superuser's LOGIN they have the ICON for complete Orders and they can see any error message for completiing Orders. Since I cant perform complete Order I can not see any error message.
         Is there any user settings for ICON's display.
Regards,
Narendra

It is assigned in role
To display - run PFCG and select the role click display and select authorisation tab click details icon and click organisation level to view the Buisness transaction
To maintain - Run PFCG and select role : SAP_Workorder_Closer ,Click the pencil and click on the authorisation tab and change authorisation value and eithier you can manually maintain I_BETRVORG with BABS value. or Choose Plant maintenance business transaction from the structure and add BABS and generate the profile. then execute the transaction.
Co-ordinate with Basis or Security team
Thanks
S.N

Error message when business completion of a production maintenance order

Hello,
When we try to do the business completion of an order, we get the following error message. We did all the steps that is mention in the error message long text, but still, we can't close this PM order... any suggestions how to resolve this issue ?
Unprocessed future change recs for order 13101294 prevent del. flag/completion
Message no. CO688
Diagnosis
There are still future change records or error records to be processed from the confirmation for the confirmation processes in order 13101294. Possible confirmation processes are:
Automatic goods receipt
Backflushing
Calculation of actual costs
Data transfer to HR
System Response
You are not meant to set the deletion flag/'completed' status for orders with future change records that have not been processed.
Procedure
You should process the open future change records using
Predefined confimration process or
The CORUPROC program, by dispatching it in Customizing in a background job (dispatch background jobs: dispatching processes).
Check if incorrect goods movements or incorrect actual cost calculations exist for the order, and reprocess these if necessary:
Reprocessing incorrect goods movements
Reprocessing incorrect actual cost calculations

1) CORUPROC: done
2) IW46:
I have about 50 of thoses messages:
Reprocessing incorrect confirmation:
BAPI2010021219323230 Confirmations ordres de travail/service BATCHADM     12.02.2010
BAPI2010021619324630 Confirmations ordres de travail/service BATCHADM     16.02.2010
BAPI2010022519341330 Confirmations ordres de travail/service BATCHADM     25.02.2010
BAPI2010022619332130 Confirmations ordres de travail/service BATCHADM     26.02.2010
BAPI2010030119322730 Confirmations ordres de travail/service BATCHADM     01.03.2010
BAPI2010030419330430 Confirmations ordres de travail/service BATCHADM     04.03.2010
3) COFC
I have many logs about availability control: ex: Item 001 Ordre 13101294 budget exceeded
4) COGI
No errors

Business completing a PM Order

I am trying to business complete a PM order say X.
The error message says"Order 1 is assigned to the order X". I can understand that order 1 is assigned to order X but when search for the order 1 I could not find it. There is no order with # 1.
How to solve this?
A general question -Is there any way where I can see what all the orders are assigned to a order say X means which orders have their settlement receiver as order X.
Thanks

There is no problem of external service.........Whenever any PM Order say X you assign settlement rule and in that rule you specify Receiver as as another PM Order say Y, In this case if you are doing Business closure of order Y without closing oredr X system will give error "Order X is assigned to account of order Y" and for this there is no linkage or checking of external serviece .....................By doing "Do not execute" of order X system will allow for business closure of order Y.

I need help on Complete Sales Order Cycle using Business One

Hai,
Actually I am crating an external application using Business one DI API, Now I need a Complete Cycle of Sales Order Cycle from Sales Order Creation to Goods issues, goods receipt ,invoice generation , pick and pack etc
Anybody Please help me out on generating a Complete Sales Order Cycle using Business One GUI or theory by using Business One
Please help me out in this regard
with regards
Somaraju

Somaraju,
You may want to look at the Sample Code example that is part of the 2005A Business One SDK that shows and external Business One interface written in VB.Net that shows how to create a Sales Order/Invoice in SAP Business One. This example can be found at: Start > Programs > SAP Business One > SDK > Samples > COM DI > 05. OrderAndInvoice. For complete training on the processes you are asking about from within the SAP Business One product, you can reveiw the SAP Business One eLearning product training if you are and SAP Business One partner in the areas that you have outlined at service.sap.com/smb.
Hope that helps,
Eddy

Business Completion of Service orders collectively

Hi Gurus,
Is there anyway I can do the business completion of service orders/work orders collectively? I have around 1000 orders which needs to be business completed.
Regards,
Prase

This can be possible from IW38, the range of orders which needs to be Business Completed should be given in the selection, and then execute. Once the report displays the orders then go to ORDER > COMPLETION > COMPLETE BUSINESS.

VL10E report should show only sales order with complete stock

Hello Friends,
I have to make-to-order scenario. While creating a sales order the system proposes a delivery date based on the inhouse production day maintained in the material master.
In VL10E the system gives list of Sales Order for which delivery is due on that particular date. It does not check whether actually the material is really available on that date for the concerned sales order.
Is there any scope ( any config change or user_exit) which will show only the sales order with complete stock confirmed through production order in the VL10E report.
Regards
Debesh

Hi,
Check userexit LV50R_VIEWG02. If CF_SUBRC = 1 you will not see it in the list. For this purpose in the interfase you have the information in IS_VBEP. Set a break-point and check the conditions.
For more info check the Note 198137 - VL10: Customer-specific enhancements / user exits
I hope this helps you
Regards
Eduardo

User Exit Maintenance Order Business Completion

Hello Gurus,
User Exit IWO10004 triggers when TECO the Maintenance order.
What is the User Exit which can triggers when Business Completion?
My requirement is I want to restrict the Business Completion only for TECO orders,
Currently I even REL order also can be CLSD by business completion which is bypassing TECO status.
how can I restrict this?
Please advice
Thanks
Ashok

Ashok,
Adding some inputs of Pete, the following code seems to be working fine. This throws this error
in the taskbar, when you Business Complete and try to save a Non-Teco Order.
DATA: V_PHAS TYPE PM_PHASE,
       V_STAT TYPE J_STEXT.
SELECT SINGLE IPHAS FROM AFIH INTO V_PHAS
WHERE AUFNR = CAUFVD_IMP-AUFNR.
CALL FUNCTION 'STATUS_TEXT_EDIT'
   EXPORTING
     FLG_USER_STAT = 'X'
     OBJNR         = CAUFVD_IMP-OBJNR
     ONLY_ACTIVE   = 'X'
     SPRAS         = SY-LANGU
   IMPORTING
     LINE          = V_STAT.
IF V_PHAS <> '3'.
   IF V_STAT+0(4) = 'CLSD'.
     MESSAGE: 'Status ''TECO'' is essential for Business Completion' TYPE 'E'.
   ENDIF.
ENDIF.
CLEAR: V_PHAS, V_STAT.
Please test and confirm.
KJogeswaraRao

Completed sales order changed with the updated ship-to address

Hi,
My client did the following test and found that:
- Change the ship-to address of a customer
- new sales order of this customer defauted to the update ship-to address (good!)
- old/completed sales orders of this customer show the new ship-to address (bad!)
Data used in occurred transactions should not be affected by data maintenances that made after the transactions. So, is the finding a design flaw in OM or there is parameter that can be tuned?
Thanks in advance for any input!

Hi,
Oracle will not store the entire Address in Sales Order tables. It will only store the internal id.
Now there could be two possible scenarios for which your client tried to chance the ship to address:
1) There is a correction required in the address(e.g. change in street name). If this is the case then changing the address would be correct approach, and I think all the sales orders(old or new) should reflect correct address.
2) If there is a relocation, then the correct approach would be to make the current customer site inactive and create a new site for the new address instead of changing the existing site. Changing the address of existing site for such a business scenario may not be a correct approach.
So based on what was the reason for changing the ship to address, I would say the system is functioning as expected.
Hope this helps.
Regards,
Nitin S. Darji

Set the status of mass orders from CLSD (Business completion) to TECO

Hi All,
Can you please help me out on how to set the status of multiple orders from CLSD (Business completion) to TECO(Technical Complete) .
Regards,
Shruthi.

I'm assuming production orders, you can do that in COHV, selection criteria Sys. Status "CLSD". Click on Mass Processing button and select Technically Complete.

Business completion of orders iw38 -exclude orders with DLFL equipments

Similar Messages

Maybe you are looking for