Business Connector and sap router on same server?

Hello,
We are investigating currently in order to install "Business Connector" and "Sap router" on a same dedicated server.
I would like to know if it is possible or not recommended, etc... if there are some guidelines.
If someone has experience in this solution.
Many thanks for your help

I can't see a reason why not... any particular concerns?
Regards
Juan

Similar Messages

  • Solution Manager and SAP ECC on same server

    Hi Experts,
    I want to install Solution Manager and SAP ECC on single server. Oracle database with different schema (e.x SAPSR3, SAPSR4)
    But can I use same mount folders?
    Kindly highlight your experience and knowledge on this point?
    Thank you so much
    Regards,
    LuongDK

    >
    LuongDK wrote:
    > Hi Experts,
    >
    > I want to install Solution Manager and SAP ECC on single server. Oracle database with different schema (e.x SAPSR3, SAPSR4)
    > But can I use same mount folders?
    >
    > Kindly highlight your experience and knowledge on this point?
    >
    > Thank you so much
    > Regards,
    > LuongDK
    Hello LuongDK,
    Please refer to the FAQ section on http://service.sap.com/solutionmanager, Check the installations section:
    Which system should I use to install SAP Solution Manager?
    The system has to be dedicated to the SAP Solution Manager. No other components can be installed on top of SAP Solution Manager.
    SAP Solution Manager does not necessarily require separate hardware. It can be installed as a separate instance on an existing hardware.
    This means that the hardware can be shared if it is sufficient to support 2 systems. However a MCOD option is not recommended at all.
    Regards
    Amit

  • SAP Business Objects and SAP Business Objects PCM

    Hi all
    We want to know if is recommendable to have Business Objects and SAP Business Objects PCM installed in the same server, and if is necessary to have a special configuration of the services for both applications?
    Thanks in advance

    Hi,
    You can refer the below link for PCM Install guide:
    http://service.sap.com/~sapidb/011000358700000225772009E/FPM75_PCM_InstallGuide_en.pdf
    If you are looking for more info related to specific requirements then from the below link select BusinessObjects tab and select PCM category for more guides.
    http://help.sap.com
    -Noor.

  • Send IDOC from Business Connector to SAP faster

    Hi Developer!
    I need to send a very lot of IDOC converted from XML files from the Business Connector to SAP. The XML files are in different directories pro business partner, but they have a same type (ISU_MSCONS).
    My problem, that the import take a lot of time. Only in every 3 seconds (IDOC creation time) gets (or works up?) the SAP one IDOC. I start diferent services pro partner at the same time to import the IDOCs, but I couldnt short the 3 second work time in the SAP. So you can count it easy, that in 1 minute I can import 20, in 1 hour 1200, in 1 day 28800 IDOCs instead of 100.000.
    It is really parallel import? Have anybody any idea to make the import more faster. I know (asked the SAP Administrator) so, one BC - SAP connection (Program_ID) has more pools (= threads) in the SAP at the same time.
    Thanks any help,
    Charlie

    Hi Satish,
    You can achieve this requirement
    1)If your external system going to support web service cals then send IDoc from External system as a web service, in PI use sender side SOAP and receiver side IDoc receiver channel  to  send IDoc.
    or
    2)Use proxy program ,implement the same ALE logic in PI.
      or
    3)Copy the Extenal IDoc message in to file folder as XML,then use file adapter to pick up this message and send it SAP using IDoc.
    Regards,
    raj

  • How to Install R/3 and CRM on the same Server?

    Hi All,
    I would like to install R/3 and CRM on the same server (as the load is less). I know how to install them seperately.
    I would like to have some instructions how to have them installed on the same server.
    Thanks in advance.
    Regards,
    Vijay

    As Sunil explained - MCOD (or) you can think to have 2 differnt DB SID's as weel 2 different SAP SID's. By default 1st Installation takes Listener Name as LISTENER & port 1527 when you are doing second Oracle installation use another lister name as LISTENER002 & give port 1526 ( for example).
    MCOD will be the best option to unplug from oracle instalation requirement but - think of future plans. even it can be any size business don't think to do MCOD with SAP Business System like R3 .
    Becuase qwe may have different requirements from the Business / functionla Team for refreshing / building the development system with a copy of production system - don;t get confused there are Techniques for Refreshing a Development Instance with production system also.
    Any how you have to take decission to go with MCOD (or) not . I also request SUNIL to comment on MCOD installations  with R3 system .
    But  I beleive Sascha Version is wrong - i can have multiple application servers of differnet products on single Box if my OS supports.
    as application servers will have 3 individual mount point which points to different system
    <Central Instance>:/sapmnt/<SID>/global
    <Central Instance>:/sapmnt/<SID>/prfoile
    <Central Instance>:/sapmnt/<SID>/exe
    each SID  NFS mount point can point to different sever & i can multiple application server of differnt SAP Products on 1 BOX.
    Trans directory is problem - but it does not require either for installation (or) for runningAS instance .

  • Business Connector to SAP XI migration

    Hi Experts,
    1)Customer is using Business connector  with R/3 46C .
    2) Now R/3 4.6C  will be Upgraded to ECC6
    3) We need to first find out if the BC will work with ECC6 or not. If not we will need to give them the Approach for BC to XI Migration.
    if XI has to be used what will happend to the interfaces running in BC ...is their any way that we can use that in XI and work....
    or ...we need to do developmet from the scrach...
    Thanks
    Rupesh

    Hi,
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a8424011-0d01-0010-e19d-e5bd8ca52244
    http://www.sap-hefte.de/download/dateien/917/052_lesesprobe.pdf
    Business connector --
    WAS - Business Connector
    business connector documentation
    SAP Business Connector
    Business connector
    Will Business Connector 4.6 be affected by new  Daylight savings changes
    Business connector
    More info on XI can be found at https://service.sap.com/xi
    and webAS on http://help.sap.com/saphelp_nw04/helpdata/en/f3/e20f3adfd0a706e10000000a114084/frameset.htm
    Check this also-
    http://help.sap.com/saphelp_nw2004s/helpdata/en/6f/1bd5c2a85b11d6b28500508b5d5211/frameset.htm
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b4f3755a-0401-0010-b6b3-9b65bb7d4503
    http://www.yellow2b.com/Yellow2B-Content_C-Content_full_1112108163571.html
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a8424011-0d01-0010-e19d-e5bd8ca52244
    Thanks,
    Satya Kumar

  • Optimum approach to architect BI solution in Business Object and SAP BI

    Hi Expects , I as long as my experience going in delivering BI solution in Business Object and SAP BI We have option to connect to SAP BI via Building BO Universe on SAP BI cube or BEX Query . Now take a example we have 1000s of BEX queries in production. So Should I architect the solution recommending creation of 1000s of BO Universe. Which I donu2019t feel fusible option. You may reply me back saying create BO Universe on SAP BI Cube/Multiprovider, which will reduce no of universe to be created . But at the same time couple of questions comes in my mind u20131. Will I be able to leverage SAP BIA (SAP Business Intelligence Accelerator) to get best performance . 2. As of now BIA dose not accelerate queries build on Multiprovider ??? I believe When I Build Universe on BEX Query It will leverage BIA , But Not sure what will happen if I build BO Universe on Cube. Can we collectedly arrive at Optimum approach to architect Bi solution in Business Object and SAP BI ?? Comments are welcomed Regards Ashutosh D

    Ashuthosh...
    You might want to have a look at Pioneer for another option for your architecture.
    https://www.sdn.sap.com/irj/scn/subscriptions/content?rid=/media/uuid/905d0ad2-9060-2b10-73bc-ce42a5668c6e
    Arun

  • How to install both solution manager and ECC Development on same server

    Hi All,
    Can anyone help me how to install Solution Manager and ECC Development on same server and also whether SLD is required? if yes, then how to setup.
    Pls let me know.
    Regards,
    Karthik

    Hi Karthik,
    I try to answer you message, my answer may not be sufficient for you.
    Install SAP Solution Manager and ECC development as separate systems sharing the same server. So each system will get it's own system id and installation number.
    Verify sizing of both systems.
    SLD is not mandatory for a SAP Solution Manager. If a SLD already exist in your System Landscape, you can connect SMSY (System Landscape) in transaction SMSY_SETUP with a SLD. Information on System will then be retrieved from SLD, rather via an RFC.
    Best regards,
    Ruediger Stoecker

  • Set up Business Connector within SAP ERP 2005

    Hello!
    Which SPRO-Activity is responsible for setting up Business Connector within SAP ERP 2005 (only ABAP-Stack)?
    What is the effort should be regarded for this issue?
    Thank you very much!
    regards
    Thom

    Hi Tony,
    are you using gcj from Red Hat as Java? You can check this by
    rpm -qf `which java`
    This should point to either Sun JDK 1.4.2 for i386 and IA64 or IBM JDK 1.4.2 for x86_64
    Thanks,
      Hannes

  • Difference Between SAP Connectors and SAP Web Services Framework

    Hello,
    I would like to know the main difference between the SAP Connectors protocol (that uses SOAP) and the SAP Web Services Framework starting with NetWeaver.
    Thank you,
    Pedro Carrilho

    Hi Pedro,
    I guess you are talking about Business Connectors and XI.
    If that is the case, the differences are:
    SAP XI belongs to SAP Netweaver Technology, whereas BC is an Integration tool provided by Webmethods.
    SAP XI is based on a model called "Hub & Spoke" and Business Connectors are "point to point". So by using XI, what happens is that you do not redesign Solutions once again.
    With XI you save the entire integration knowledge of a collaborative process centrally in SAP XI: Objects at design time in the Integration Repository and objects at configuration time in the Integration Directory. In this way, SAP Exchange Infrastructure follows the principle of shared collaboration knowledge: You no longer need to search for information about a collaborative process in each of the systems involved, but can call this information centrally instead. This procedure considerably reduces the costs for the development and maintenance of the shared applications.
    Also SAP XI comes with pre-configured solutions bundled along with it, so you can straight-away use the solution instead of redesigning.
    Also i believe SAP XI is integrated as a required solution for some new mySAP solution like SRM, there are some scenarios within SRM requires SAP XI to be used and we cannot use BC's there.
    But incase if you do not have multiple systems connected and communication is between just 2 systems, BC should be sufficient, instead of investing on XI.
    But i guess slowly SAP will be stopping its support for BC, as SAP XI can do everything that BC does and even much more.
    Also go through these threads...
    Re: Business connector
    XI vs Connectors (Like JCo and .NET)
    I hope this is what you were looking for...
    Regards,
    Abhy

  • Business Object and SAP Integration

    All,
    We've BOJ Data Services XI installed.
    Would like to integrate with SAP, does anyone know how or have good information about Business Object and SAP Integration?
    Please adivce.

    Hi Lynn,
    If you need to have Business Objects and SAP work together in conjunction you need to have the Business Objects Integration Kit for SAP. Integration Kit provides the database drivers and other features for reporting off SAP.
    Link to download the useru2019s Guide:
    -     Please go to Http://help.sap.com
    - Click on Business Objects tab
    - Select the product as Integration Kit for SAP
    User guide: Business Objects Integration Kit for SAP Useru2019s Guide.
    I hope that helps you.
    Regards,
    Prashant

  • Business connector  and BAPI ,java code

    Guy's
    we are having development project based on <b>Business
    connector and bapi</b> for sales order creation,we are
    going for function module /TECCOM/SALESORDER_SIMULATE
    for Availability request ,i am not aware of using business
    connector and bapi before,they are going for some java code,now i have to create java code and use this particualr BAPI,pls if somebody already worked on such issue,then help me with some material which will guide
    me and help me in finishing this task easily,
    <b>mail me at [email protected]</b>

    This is a very usefull link:
    http://www.henrikfrank.dk/abapexamples/Java/

  • Business Objects and SAP BI Integrated Planning material

    hi
    guys
         i am looking for Business Objects and SAP BI Integrated Planning any material site  plz send me
    regards
    suresh

    Hi ,
       Please find these blogs by Ingo. This should help you.
    BusinessObjects and SAP - Installation and Configuration Part 1 of 4
    Install Part #1
    BusinessObjects and SAP - Installation and Configuration Part 2 of 4
    Install Part #2
    BusinessObjects and SAP - Installation and Configuration Part 3 of 4
    Install Part #3
    BusinessObjects and SAP - Installation and Configuration Part 4 of 4
    Install Part #4
    BusinessObjects and SAP - Configure SAP Authentication
    SAP Authentication
    BusinessObjects Integration with SAP NetWeaver BI - Technical Material
    Thanks,
    Gopi

  • Integration for Business Workflow and SAP Interactive forms by Adobe

    Hi
    Is any of you able to watch the following SDN eLearning Session ?
    <i>Integration for Business Workflow and SAP Interactive forms by Adobe (RIG session 7)</i>
    I can play nearly all the other eBooks, but not this one. Any idea ???
    Regards, bernhard

    I solved the problem.
    It is not possible to view the ebook with IE 7.0. So I removed the new Internet Explorer and everythink is working fine.
    Greetings, Bernhard

  • Is there any Difference between Business Objects and SAP Business Objects

    Hi Folks,
    I am planning to learn BO, i need clarification is both normal BO and SAP BO are same or SAP's BO is different from what we have old BO
    Please any one suggest me on this.
    Thanks & Regards
    Ramakrishna Kamurthy

    hi,
    BO and SAP BO are both the same....recently the SAP took the BO and it is now the property of SAP....also in the future the BO is used in SAP BI for reporting purposes. But you need licensing for SAP BO.
    hope it helps.
    raghu.

Maybe you are looking for