Business connector documentation
Hey Guys,
Where can I get documentation on Business Connector related development. Especially the architecture and development of the same.
I am well versed with XI development. However, I have not found the same level of documentation for Business Connector in the help portal in SAP.
I am especially looking for docuemntation on Configuration and Implementation of Integration Scenarions in Business Connector.
Any links documents would be appreciated.
Thank you for the help.
Sumit.
Hi,
Check this also-
http://help.sap.com/saphelp_nw2004s/helpdata/en/6f/1bd5c2a85b11d6b28500508b5d5211/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b4f3755a-0401-0010-b6b3-9b65bb7d4503
Regards,
Moorthy
Similar Messages
-
Documentation Business Connector
Hi,
I´m a beginner with the Business Connector, someone might provide some documentation of interest to me, please?.
Thanks in advance.
Pilar.HI,
See the below links
Business connector --
WAS - Business Connector
business connector documentation
SAP Business Connector
Business connector
Will Business Connector 4.6 be affected by new Daylight savings changes
Business connector
More info on XI can be found at https://service.sap.com/xi
and webAS on http://help.sap.com/saphelp_nw04/helpdata/en/f3/e20f3adfd0a706e10000000a114084/frameset.htm
Check this also-
http://help.sap.com/saphelp_nw2004s/helpdata/en/6f/1bd5c2a85b11d6b28500508b5d5211/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b4f3755a-0401-0010-b6b3-9b65bb7d4503
Regards
Chilla
<i>reward point if it is helpful..</i> -
Business Connector to SAP XI migration
Hi Experts,
1)Customer is using Business connector with R/3 46C .
2) Now R/3 4.6C will be Upgraded to ECC6
3) We need to first find out if the BC will work with ECC6 or not. If not we will need to give them the Approach for BC to XI Migration.
if XI has to be used what will happend to the interfaces running in BC ...is their any way that we can use that in XI and work....
or ...we need to do developmet from the scrach...
Thanks
RupeshHi,
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a8424011-0d01-0010-e19d-e5bd8ca52244
http://www.sap-hefte.de/download/dateien/917/052_lesesprobe.pdf
Business connector --
WAS - Business Connector
business connector documentation
SAP Business Connector
Business connector
Will Business Connector 4.6 be affected by new Daylight savings changes
Business connector
More info on XI can be found at https://service.sap.com/xi
and webAS on http://help.sap.com/saphelp_nw04/helpdata/en/f3/e20f3adfd0a706e10000000a114084/frameset.htm
Check this also-
http://help.sap.com/saphelp_nw2004s/helpdata/en/6f/1bd5c2a85b11d6b28500508b5d5211/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b4f3755a-0401-0010-b6b3-9b65bb7d4503
http://www.yellow2b.com/Yellow2B-Content_C-Content_full_1112108163571.html
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a8424011-0d01-0010-e19d-e5bd8ca52244
Thanks,
Satya Kumar -
Transport business connector service.......Urgent
Hi Experts,
The scenario is i am sending IDOC from SAP to SQL and SQL sends data for confirmation of Purchase order in SAP.
For this i have 2 services in business connector. Things are working fine and i am at the stage of transporting the object to PRD.
The problem is, I used an existing Package to create these 2 services.and for these services i created aHI,
See the below links
WAS - Business Connector
business connector documentation
SAP Business Connector
Business connector
Will Business Connector 4.6 be affected by new Daylight savings changes
Business connector
More info on XI can be found at https://service.sap.com/xi
and webAS on http://help.sap.com/saphelp_nw04/helpdata/en/f3/e20f3adfd0a706e10000000a114084/frameset.htm
Check this also-
http://help.sap.com/saphelp_nw2004s/helpdata/en/6f/1bd5c2a85b11d6b28500508b5d5211/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b4f3755a-0401-0010-b6b3-9b65bb7d4503
Regards
Chilla -
Business Connector - JRE memory problem
Hi,
We have an Business Connector v4.0.1 under win2000 that uses IBM jvm 1.3.0 and due to the DST change we upgarde the JVM to SUN JRE 1.3.1_19,
The problem that we have is that the Xmx limit for Sun JRE 1.3.1_19 is limited to arounf 1.7 M.
However before the upgrade with the IBM jvm 1.3.0 we can use a value of Xmx up to 3G.
The question is why the Sun JRE is limited to 1.7 and not the IBM jvm..
Thanks for your help,
Chak,Hi,
Please see the below links
WAS - Business Connector
business connector documentation
SAP Business Connector
Business connector
Will Business Connector 4.6 be affected by new Daylight savings changes
Business connector
More info on XI can be found at https://service.sap.com/xi
and webAS on http://help.sap.com/saphelp_nw04/helpdata/en/f3/e20f3adfd0a706e10000000a114084/frameset.htm
Check this also-
http://help.sap.com/saphelp_nw2004s/helpdata/en/6f/1bd5c2a85b11d6b28500508b5d5211/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b4f3755a-0401-0010-b6b3-9b65bb7d4503
Regards
Chilla.. -
Forwarding XML/EDI from SAP Business connector to EDI (cloverleaf)
Hello,
We are having issues setting SAP up to work with the business connector and our EDI system - cloverleaf.
For testing, we would like to:
1. Create an idoc in SAP and send it to the Busness Connector.
2. Have the busness connector send the doc via XML to our EDI system cloverleaf.
Currently, I have things setup like so:
SAP/ECC6:
SM59: RFC setup as type T and works fine.
WE20: Partner Type LS:
I have 2 message types setup (in outboard: I have "orders" and in Inbound I have the same).
in WE21: I have a cloverleaf (our EDI system) to run with the RFC destination I setup in SM59.
On the Business connector, I have the following under routing rules:
From SAP to the Business connector:
Sender: 8805
Reciver: 10000000008
Message Type: Orders
ACL Group: none
Package: default
Main Flow Services: wm.PartnerMgr.flows.88605.1000000008:ORDERS
Transport: ALE (R3/IDOC)
SAP destination: RD1 (our sid).
FOR my outgoing to our EDI system cloverleaf:
I am using the sender: * - Not sure if this should be SAP or the BC.
Reciver: * - Our EDI system. our EDI system is listening on port 49001.
Message Type: Orders
Under URL (not sure about this one)
I have http://reg2lxap0725:5555/MessagingSystem/receive/BcAdapter/BC
I am however stummped on how the URL shold look..
Now, when we test the above config... I recive the following results in WE02.
0000000000003024 25 03 Green Light: IDoc Successful Green LS/ /SAPBC ORDERS05 ORDERS Outbox CLOVERLEAF
For some reason, we also have an "inbound" that fails.
0000000000003025 25 56 Red Light: IDoc Has Errors KU/ /0000088605 ORDERS05 ORDERS Inbox SAPRD1
My main question is however around routing...
We are trying to send these to our EDI system which is listening on 49001.
I am not sure how they want us to setup the routing rules to pass this over to the right port..
I have also searched the documentation, and have not found any real step by step guides, so I may be missing a few things..
Any advice to point me to the right direction is greatly appriciated....
Thanks everyone,
RichardHello Prateek,
Thank you very much for your answer. The AdapterGuide was really helpfull.
Now the routing rule is associated to the correct Service (that was a the problem). So the rule started to process the XML files from the folder (the XML files disappeared immediately after I corrected the rule).
But now my problem is that on the SAP side there is no inbound IDOCs so it seems the trasmission may failed.
Moreover under "Routing"-->"Transactions" I don't see these entries with the the current date.
Our routing rule is simple: "wildcard" "wildcard" "wildcard" "ALE (R/3 IDOC)"--><OUR SAP SYSTEM>
The SAP connection is working as I can test under "SAP..." menu.
Is there any other way to monitor what had happened with these XML files? I'm sure the BC processed as the files are gone, but there is no IDOC in the destination SAP...
Thanks a lot! -
Plugging XSLT / XML processors into Business Connector 4.7
Hi,
I need to use Xalan 2.6.0 and the associated XML parsers
in the Business Connector.
Does anyone know whether any built-in services or
SAP Adapter services would be negatively impacted by
this change? I have found nothing in the documentation.
(Among the reasons I need to do this are that the
processors in package com.inqmy.lib.jaxp do not seem to
be JAXP 1.2 compliant. Also, they neither respect the
encoding-attribute of <xsl:output>, nor allow to override
it from the outside. When generating HTML, this has
created problems for some clients).
In order to use Xalan/Xerces, one needs to set the
variable PREPENDCLASSES in server.bat to contain
the Xalan jars, and change the value of the configuration
variable watt.xslt.jaxp.properties in the server.cnf file.
The value of this variable is the name of a file in normal
Java properties syntax, which contains values for the
relevant System properties:
javax.xml.transform.TransformerFactory
javax.xml.parsers.DocumentBuilderFactory
javax.xml.parsers.SAXParserFactory
I'm using BC 4.7 SR2, Core Fix 2, JDK 1.3.1_09 under WinXP
At first glance everything seems to work fine (I can
still use recordToDocument), but I'd like to be sure.
And what about BC 4.6?
-- Sebastian Millies
IDS Scheer AGCheck out this weblog series for starters: /people/tobias.trapp/blog
Then I would suggest you post your question to the ABAP forum. -
HTTP POST / SAP Business Connector 4.6
I'have written my message in forum XI which is better location for this subject.
Message was edited by: Vincent BLOHORNHi Ganimede,
I'm not sure if 4.6 is (should be) but 4.8 is definitely UC compatible.
Please follow these links:
[Connectors @ SAP overview page|http://service.sap.com/connectors]
[SAP Business Connector (SAP BC) Documentation|http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000719330]
Regards,
Martin Fuchs
SAP AG -
Query Related to Business Connector
Hi,
I'm currently working on Business Connector, which is new to me. I am going through the reference documents to understand the working of the same. However, the requirements have started pouring in.
As of now, I have the follwoing requirement.
I've a SAP Function Module say "Z1234" which is RFC enabled. To this FM, all export paramets which are passed are FIELDS, none are table(s).
Now what i require is to fetch this data into Business Connector by writing some code in Business Connector whose FRONT END is JAVA.
Can anyone in here help me to achieve this requirement?
Suggestions welcomed.
Thanks & Regards,
RajeshHI,
I think Scenario based is better
1) It's more reasonable to manage your documentation with the business process since they are quite related
2) I suggest that you use the check out /check in functionnality to prevent the modification from multiple users at the same time
3) As the changes happen some time, which means you have to maintain the related document often, it would be a good idea to use the link but not the copy of document
4) In most case, i would insert documents of various types in different tabs like Trainning materials, project documentation, test in SOLAR02
5) What's more, if all your user guides are uploaded to the Trainning material tab, you will be able to use the existant documents to supply the SOLAR_LEARNING_MAP, which in my opinion, simplifies a lot the tranning session of any global-rollout
Jiamin Pan -
SAP Business Connector certificate problem
We are trying trying to send data from SAP to bank via SAP business connector using bank URL. We have configured the certificates in SAP BC which are authenticated by bank on the basis of private key generated from our server. Now when we trying to post data to bank it is giving below error.
java.lang.RuntimeException: iaik.security.ssl.SSLCertificateException: Peer certificate rejected by TrustDecider
Any idea? Please give me some suggestions to resole this problem.
Thanks and RegardsNormally I do not like to give documentation references, but in this case I think it makes sense. Certificate handling is an ugly and complicated topic, so many things can go wrong. Please check the SAP BC 4.7 Administration Guide, page 103 onwards ("Securing communications with the server"). It explains very well what needs to be done. Make sure you configured everything correctly.
CSY -
Using Business Connector to convert a file to XML
Hi, I have been asked to see if a flat file created by an abap program can be converted to XML format using Business Connector (4.7). I have looked in the tutorial and the pdf documents but can not see how this is done. Please could someone give me some advice?
- Is this possible using built-in Business Connector services - or is it more complicated?
- Should I even bother to try to do this when it it easy for me to create an XML format file from ABAP?
- Is there a good course, book, documentation that would help me?
Thanks, AndyHi Andy!
Our customers have this requirement to convert some "flat-file" into some XML format via Business Connector quite often. The best way (as the last post sugessted) is indeed to use the "EDI-Adapter" which is free of charge (service.sap.com/connectors).
With that module you can convert all flat-files (delimiter based, offset based, mixed, even classical EDI formats, ...) based on some definition ( = template). Be careful the EDI-Adapter Module download page states that it is supported for BC version 4.6 . However it is absolutely no problem to use it in BC 4.7 versions as well. Remember that you will NOT get any official support by SAP when using the EDI-Adapter module.
Simply import the EDI-Module as general BC package (server/replicate/inbound directory).
Generally it is very powerful, stable and well documented ...
Best regards, Andy -
Business Connector System tasks
I am trying to determine where the system tasks in SAP Business Connector are documented. There are a number of system tasks in the Scheduler and no documentation. The task that I am concerned with is the 'DB Session Sweeper'.
Unable to gather any additional information
-
Business Connector upgrade !?
I have just joined a project with an exisiting Business Connector implementation talking to a SAP 4.0B box. They are upgrading their SAP system to ECC6 and want to keep BC. I have just read the various SAP Notes, replies on SDN, etc and I am still unclear if I can download the latest BC version ( 4.7 ? ) and if it will work with the ECC6 box.
Any help much appreciated.This information is not made clear in the current documentation for 4.70:
http://service.sap.com/~form/sapnet?_SHORTKEY=01200252310000047738&_OBJECT=011000358700000176652005D -
Business connector server on Virtual Server
Hi,
Currently our 4.6 release Business Connector servers running on Windows NT Operating system. We would like to upgrade them to BC release 4.7 on Windows 2000 operating system on Virtual servers.
Are there any known issues/disadvantages if we install Business connector servers on Virtual Server rather than a Physical server?
These virtual servers will be in the same domain as that of SAP systems. Host names of the upgraded Virtual servers will be same as the current production BC hosts.
Thanks,
SriniTechnical Data
These functions are:
Changed, new, deleted
For Release
Software Component
· Component: SAP Business Connector (external)
· Release: 4.7
Assignment to Application Component
BC-MID-BUS (SAP Business Connector)
Country Setting
Valid for all countries
Use
The following information provides you with an overview of the new features in SAP BC Release 4.7: It also tells you about incompatible changes that you need to know about before performing an upgrade.
SAP BC 4.7 is based on Integration Server 4.6 from webMethods. However, the SAP BC elements in Integration Server 4.6 have been redeveloped (see below for details).
Features
Additional Functions in SAP BC Developer
As well as SAP BC Administrator GUI, you can now use SAP BC Developer to perform typical development tasks. You do not need administrator authorizations in SAP BC Developer to do this. For example, with SAP BC 4.7 you can use SAP Lookup to generate elements for the Developer. This enables you to gather information about function modules, structures (tables), BAPIs and IDocs in an SAP system, and then generate outbound maps or records for these objects directly.
SAP BC Developer contains a new menu, SAP, which contains the following functions:
· Look up a function module and generate an outbound map
· Look up a structure definition and generate a record.
· Lookup a business object.
· Look up an IDoc and creating a Record.
· Browser for Function Maps.
In addition, the Developer now also supports the following actions:
· Generate an SAP inbound map if you want an SAP system to run a service in SAP BC.
· Generate an SAP outbound map to execute a function module in an SAP system.
· Generate a record based on an SAP ABAP Dictionary structure.
· Generate a record based on an SAP IDoc.
SAP BC Developer now also supports a proxy bypass list. This means that you no longer need to define whether a connection runs through a proxy; instead, the bypass list performs this task.
New Public Services on SAP BC Server
pub.string:gzip
Compresses the specified input string and generates a check total (optional). For measurements or for statistical purposes, the lengths of the zipped and unzipped strings are provided as output.
· pub.string:ungzip
Decompresses a specified input string, which was compressed with pub.string:gzip, and verifies the check total (optional).
· pub.string:numericParse
Analyzes a number in accordance with a given number pattern.
· pub.math:randomLong
Generates a pseudo random number and sends its string representation in a pipeline variable. You can use this number as a universal identifier with an acceptable level of security, as long as it is used in non-distributed scenarios and for a small number of variables.
· pub.file:head
Shows the start of a given file.
· pub.file:tail
Shows the end of a given file.
· pub.flow:sleep
Puts the current service into sleep mode for the specified period (in seconds).
Restructuring of the WmPartners Package
The WmPartners package in SAP BC Server has been completely restructured and now offers the following enhancements:
· Improved status information in the messages displayed in the Transaction Store and the Audit Log. This solves a range of problems, such as incorrect status information being displayed by IDocs.
· Improved search and sort options for transactions in the file system of the Message Store. In the Transactions menu, SAP BC Administrator GUI offers you a new option, Message Store Query Settings, which enables you to select and delete transactions. In Release 4.7, the Message Store can also be displayed on separate pages, which makes it easier to edit large numbers of transactions.
· Improved search and sort options for Routing Rules. In the Routing Rules menu, SAP BC Administrator GUI offers you a new option, Routing Rule Filter Settings, which enables you to restrict the number of routing rules that are displayed, and to sort the display. The filter accepts all combinations of characters, and the placeholders '*' (string of characters) and '?' (one character). This makes it easier to sort and search for routing rules, especially if you need to process a large number of communication partners and message types.
· Forwarding the "Confirm Event" tRFC (triggered by an SAP system) to the next receiver (for the following transports: B2B Service, ALE (R/3 IDoc), and XML (only if another SAP BC is the receiver)) and triggering "Confirm Event" from an external client. Both of these cases can be significant if the final receiver is an SAP system. In this case, "Confirm Event" removes the transaction ID from the ARFCRSTATE table, which can improve system performance significantly when a large number of tRFCs are being processed.
Support for Distributed Statistic Records (DSRs)
SAP BC has supported the generation of DSRs since Release 4.7 DSRs enable you to monitor the performance of each SAP system and its components. In this way, you can check how much system load is produced by each individual component, and how many resources are being used. This enables you to identify "performance leaks" and optimize system performance.
The DSR support integrated in SAP BC also allows you to measure the total retention period of a process in SAP BC. To evaluate the DSRs, you require additional SAP software, including specific versions of the SAP Solution Manager, and the RFC Library. The exact requirements are still being defined.
The details will be published in SAP Note 620418. You can find a link to this SAP Note on the SAP BC download page at http://service.sap.com/sbc-download.
SAP BC Server Core Enhancements
· Reverse Invoke
The reverse invoke protocol has been enhanced and now allows you to forward more information, such as IP addresses.
If, for example, an application fails because a connection is broken, and other working connections exist, the connection is checked using a ping.
From now on, the internal server can open or reopen a defined number of connections, if necessary.
A document is generated for any exceptions on the internal server.
· Email Listener
New Features in the Email Listener
¡ Reprocessing of invalid mails for IMAP Server
¡ Processed mails selected as "unread" if they have not been deleted.
You can also specify whether mails with exceptions are deleted or not.
· Update Manager
The Update Manager manages fixes and patches for the upgrade of an SAP BC Server. Previously , the Update Manager allowed a fix to set other fixes as obsolete, using the updateVoidList field in the update.cnf file of the fix. An obsolete fix is not shown in classpath, but up to now the Update Manager has not been able to give a fix in classpath priority ahead of this other fix. The Update Manager has now been enhanced to support these fix priorities: The update.cnf file in the fix now contains an updatePrecedeList field.
Incompatible Changes
SAP BC Delivery Without JVM
The Windows Version of SAP BC 4.7 is no longer delivered with a Java Virtual Machine (JVM). The SAP BC 4.7 Installation Guide describes the JVMs that are supported.
See also
For more information, see the documentation on the SAP Business Connector, under
· http://service.sap.com/connectors (SAP Business Connector ® SAP Business Connector in Detail ® Documentation). -
Business Connector 4.6 VS CRM 4.0
I have to modify through Business Connector 4.6 some data related to SalesOrders on CRM 3.0. The fields to be modified are:
- Partner code;
- The reference date;
- User Status at Item level;
I have tried to resolve the problem through a BAPI (but it doesn't exist), with a classical Batch Input (it produces a DUMP), analyzing the standard code but it is very complicated.
Can you HELP ME. Do you have any suggestion about how to modify the fields?Hi Ganimede,
I'm not sure if 4.6 is (should be) but 4.8 is definitely UC compatible.
Please follow these links:
[Connectors @ SAP overview page|http://service.sap.com/connectors]
[SAP Business Connector (SAP BC) Documentation|http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000719330]
Regards,
Martin Fuchs
SAP AG
Maybe you are looking for
-
Https call from SAP SOAP client tool
Hi, in order to call a webservice via https using the SAP SOAP client tool, I've done the following: 1. The Client cert field filled with my personal certificate from IE (pcert.pfx) 2. The Trust store field left as it was (cacerts file of the jre). W
-
Opening new links in a new window from a pdf document
Is there a setting I can set it up for new pdf documents that are linked in a pdf document to open in a new window.
-
Mass change in fk02-payment transaction-bank name
Dear All : i want to do mass changes in fk02 - payment transaction tab - bank data tab - bank name field table name is BNKA , field name is BANKA Please suggest t code for same vijay
-
MY ADOBE FLASH 11.6 KEEPS CRASHING HOW DO I FIX
MY ADOBE FLASH 11.6 KEEPS CRASHING KEEPS CRASHING VERY ANNOYING! HOW DO I FIX THIS?
-
DNG/XMP AppendProperties/ApplyTemplate
I downloaded the latest DNG SDK (1.3) and XMP Toolkit SDK (CS6). The DNG SDK expects "AppendProperties", while the XMP has replaced that with "ApplyTemplate". I then tried an earlier version of the XMP Toolkit (4.4.2), but then multple Quicktime SDK