Business Connector related question
When I am in Business Connector and trying to right click on Trident package to Unlock it so I cab modify it and it gives me the following error:
Java.lang.NullPointer.Exception
When I click on more details I get Server Error occurred
Any ideas what is missing
or what can be done
Hi Chander,
I think all you need to do is the following.
1) Logon to the new development bussiness connector server via the administrative UI
2) From the admin screen on the left tab click under Packages -> Publishing
3) You will be taken to a screen the has available releases ...click on Add Subscribers
4) you window should have the following path Packages>Publishing>Add Subscriber
5) Choose a package. enter the following:
Host Name: ( your production bus. connector server ip
Host Port : ( your production bus. conn. server port ( default = 5555 )
Transport : HTTP
Remote user name: (your production bus conn user name )
remote pw: ( your production bus conn pw )
6) Click on add subscriber ( provided you have entered the correct un/pw and have acces to the server..you will get message that server is now subscriber to package
7) Click on return to publishing ( path should read Packages>publishing
8) Click on create release
9) under the package you set as a subscriber to production click on create release
10) enter package release information - click on create release at bottom of screen
11) return to publishing - path should read Packages>Publishing
12) you should now have a link send release to the right of your package
13) click on send release - from next screen click on your subscriber (production bus conn ).
thats it...
Similar Messages
-
Business Intelligence related Question - R12
Hi All,
We are moving to R12 soon, and right now use Discoverer Reports, BI Publisher Reports, RDF Reports and an in-house built data warehousing tool which we want to get rid of due to maintenance overhead. Moving to R12, we would like to have one tool where we can consolidate all our reporting in.
Is there BI tool that comes as part of R12, that can be used for reporting? We also might use OBIEE, which I think is a seperately licensed product.
Do you have any sugegstions?
Thanks in advance.Chinook2 wrote:
Hi All,
Is there BI tool that comes as part of R12, that can be used for reporting? We also might use OBIEE, which I think is a seperately licensed product.No BI tool as such. Some of the DBI (Daily Business Intelligence) stuff still works, I think, but I can't speak for how well the various dashboards have been maintained between 11i and R12. Oracle's preferred direction is seems to be for customers to use the OBIA (Business Intelligence Applications) product instead for pre-built Apps business intelligence (http://www.oracle.com/us/solutions/ent-performance-bi/bi-applications-066544.html#erp) . And, of course, if you want to roll your own, there's OBIEE: http://www.oracle.com/us/solutions/ent-performance-bi/enterprise-edition-066546.html .
Regards,
John P.
http://only4left.jpiwowar.com -
Business areas related question- please suggest
Hello,
we are implementing mySAP 05 from scratch , please suggest if we should define business area and if we can use them wihtout flaging it at the company code level. is it beeter to just rely on profit center and acitvate it required for all accocunts instead of using business areas, we are trying to avoid using BA's actaully so really need good advice if the same functionaluty can be captured by pca and how can it be acheieved.
kindly suggest, points will be awadredHi,
I suggest that you should go with Profit Center Accounting and not Business Areas. As you are implementing from scratch I suggest that you use New GL where the functionality of segment accounting / Leading ledger and other ledgers are quite good and will be helpful.
Some of the OSS Notes which you can refer are 826357, 1018065. There is alkso a specific OSS note which distinguishes Profit Center Accounting and Business Areas. I will let you know the Note number once I trace it.
Thanks
Murali. -
ACF2 Connector related question
We are trying to install ACF2 connector v18 on our env. I've configured the LDAP Gateway as per the documents and started it. Using LDAP browser, i'm able to connect to LDAP Gateway but not able to fetch any records from ACF2. I don't see any error in IDF log or nohup.out.
I have checked that i'm able to telnet to mainframe host and port. but from mainframe system, mainframe admin is not able to telnet to my port on which LDAP Gateway listens (5389), do you think that might be the issue? is it mandatory for mainframe to be able to talk to LDAP Gateway port? OIM connects to LDAP Gateway using that port but i'm not sure if mainframe system should also be able to connect.
Please help!If you don't want to reconcile target data into OIM then this is normal as voyager port is only responsible for reconciliation. May voyager agent is not configured in your env. But, I think you must have this agent running so that OIM will be in sync with ACF2.
If Voyager agent is configured then may you have to verify the below reason
Rename the copied file to match the VOYAGER_ID property. For example, if the target system has VOYAGER_ID = VOYAGE14, then the .properties file should be named VOYAGE14.properties.
The Voyager reconciliation agent sends a unique identifier value, called VOYAGER_ID, each time a reconciliation event occurs. This value must match the name of the .properties file being used by the topsecret-adv-agent-recon.jar file for reconciliation. -
How do we Integratet SAP to Non-SAP Using Business Connector
Hi Experts,
I am new to SAP Business Connector !!
and what are the Forms ? for SAP Business Connector Related Postings ??
!! I have a requirement to integrate sap to non-sap with Business Connector !!
We need to Generate the SAP Data In xml Format ? and the Non-sap System can Understand Only XML Formated data.
Is there any way Business Connector Box can Pull the XML file from R/3 Application Server and store the file in the Business Connector Server. from that How do we Sent XML file to Non-sap. How do we Integrate ??
what transaction code will trigger this event ? I mean is ther any SAP Transaction Code to Integrate Business Connector?
For Eg. like in R/3 SD to FICO and MM Integration.
Please Give your Valuable Suggests..
Thanks .
Upender.Hi,
It is not an issue, It will be a separate project :-).
The right forums for this,
Expert Forums » SAP NetWeaver » Process Integration
www.wmusers.com
Also go through the following links:
http://www.sapgenie.com/interfaces/businessconnector.htm
http://www.sapgenie.com/mysap/bus_connector.htm
/people/bla.suranyi/blog/2006/07/10/xi--sap-business-connector-integration-using-the-http-adapter
http://help.sap.com/saphelp_nw04/helpdata/en/6a/3f93404f673028e10000000a1550b0/frameset.htm
http://www.thespot4sap.com/Articles/SAP_XML_Business_Integration.asp
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b4f3755a-0401-0010-b6b3-9b65bb7d4503
https://websmp104.sap-ag.de/connectors
Thanks and Regards,
Chandra Madapati -
Business connector documentation
Hey Guys,
Where can I get documentation on Business Connector related development. Especially the architecture and development of the same.
I am well versed with XI development. However, I have not found the same level of documentation for Business Connector in the help portal in SAP.
I am especially looking for docuemntation on Configuration and Implementation of Integration Scenarions in Business Connector.
Any links documents would be appreciated.
Thank you for the help.
Sumit.Hi,
Check this also-
http://help.sap.com/saphelp_nw2004s/helpdata/en/6f/1bd5c2a85b11d6b28500508b5d5211/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b4f3755a-0401-0010-b6b3-9b65bb7d4503
Regards,
Moorthy -
Guy's
which is the right forum to ask business connector
related issue,will be given POINTSDear Gent.,
I am working with SAP Business Connector (BC47_CoreFix7) and my issue that i get (NULL) in Proxy Server in (Secure Proxy (HTTPS)) can you plesae assist me how to solve this issue.
Thank you in advance. -
Query Related to Business Connector
Hi,
I'm currently working on Business Connector, which is new to me. I am going through the reference documents to understand the working of the same. However, the requirements have started pouring in.
As of now, I have the follwoing requirement.
I've a SAP Function Module say "Z1234" which is RFC enabled. To this FM, all export paramets which are passed are FIELDS, none are table(s).
Now what i require is to fetch this data into Business Connector by writing some code in Business Connector whose FRONT END is JAVA.
Can anyone in here help me to achieve this requirement?
Suggestions welcomed.
Thanks & Regards,
RajeshHI,
I think Scenario based is better
1) It's more reasonable to manage your documentation with the business process since they are quite related
2) I suggest that you use the check out /check in functionnality to prevent the modification from multiple users at the same time
3) As the changes happen some time, which means you have to maintain the related document often, it would be a good idea to use the link but not the copy of document
4) In most case, i would insert documents of various types in different tabs like Trainning materials, project documentation, test in SOLAR02
5) What's more, if all your user guides are uploaded to the Trainning material tab, you will be able to use the existant documents to supply the SOLAR_LEARNING_MAP, which in my opinion, simplifies a lot the tranning session of any global-rollout
Jiamin Pan -
What is Business Connector ? How it is related to ABAP ?
What is Business Connector ? How it is related to ABAP ?
Is there any document available ? Pls provide ....
Thanks in Advance ....Business connector help
Mahesh -
Transporting Between two Business Connector 4.7
Hi,
This Question is related to Business Connector 4.7 Sorry I don't know where to post so I am doing it here.
we have two Business COnnectors one is for Dev and Prod, actually Dev is the new one we added recently, now we want developers to develop on Dev, my question is how can we move that from Dev to Prod.
Any input or document will be appreciated.
Thanks,
ChanderHi Chander,
I think all you need to do is the following.
1) Logon to the new development bussiness connector server via the administrative UI
2) From the admin screen on the left tab click under Packages -> Publishing
3) You will be taken to a screen the has available releases ...click on Add Subscribers
4) you window should have the following path Packages>Publishing>Add Subscriber
5) Choose a package. enter the following:
Host Name: ( your production bus. connector server ip
Host Port : ( your production bus. conn. server port ( default = 5555 )
Transport : HTTP
Remote user name: (your production bus conn user name )
remote pw: ( your production bus conn pw )
6) Click on add subscriber ( provided you have entered the correct un/pw and have acces to the server..you will get message that server is now subscriber to package
7) Click on return to publishing ( path should read Packages>publishing
8) Click on create release
9) under the package you set as a subscriber to production click on create release
10) enter package release information - click on create release at bottom of screen
11) return to publishing - path should read Packages>Publishing
12) you should now have a link send release to the right of your package
13) click on send release - from next screen click on your subscriber (production bus conn ).
thats it... -
Forwarding XML/EDI from SAP Business connector to EDI (cloverleaf)
Hello,
We are having issues setting SAP up to work with the business connector and our EDI system - cloverleaf.
For testing, we would like to:
1. Create an idoc in SAP and send it to the Busness Connector.
2. Have the busness connector send the doc via XML to our EDI system cloverleaf.
Currently, I have things setup like so:
SAP/ECC6:
SM59: RFC setup as type T and works fine.
WE20: Partner Type LS:
I have 2 message types setup (in outboard: I have "orders" and in Inbound I have the same).
in WE21: I have a cloverleaf (our EDI system) to run with the RFC destination I setup in SM59.
On the Business connector, I have the following under routing rules:
From SAP to the Business connector:
Sender: 8805
Reciver: 10000000008
Message Type: Orders
ACL Group: none
Package: default
Main Flow Services: wm.PartnerMgr.flows.88605.1000000008:ORDERS
Transport: ALE (R3/IDOC)
SAP destination: RD1 (our sid).
FOR my outgoing to our EDI system cloverleaf:
I am using the sender: * - Not sure if this should be SAP or the BC.
Reciver: * - Our EDI system. our EDI system is listening on port 49001.
Message Type: Orders
Under URL (not sure about this one)
I have http://reg2lxap0725:5555/MessagingSystem/receive/BcAdapter/BC
I am however stummped on how the URL shold look..
Now, when we test the above config... I recive the following results in WE02.
0000000000003024 25 03 Green Light: IDoc Successful Green LS/ /SAPBC ORDERS05 ORDERS Outbox CLOVERLEAF
For some reason, we also have an "inbound" that fails.
0000000000003025 25 56 Red Light: IDoc Has Errors KU/ /0000088605 ORDERS05 ORDERS Inbox SAPRD1
My main question is however around routing...
We are trying to send these to our EDI system which is listening on 49001.
I am not sure how they want us to setup the routing rules to pass this over to the right port..
I have also searched the documentation, and have not found any real step by step guides, so I may be missing a few things..
Any advice to point me to the right direction is greatly appriciated....
Thanks everyone,
RichardHello Prateek,
Thank you very much for your answer. The AdapterGuide was really helpfull.
Now the routing rule is associated to the correct Service (that was a the problem). So the rule started to process the XML files from the folder (the XML files disappeared immediately after I corrected the rule).
But now my problem is that on the SAP side there is no inbound IDOCs so it seems the trasmission may failed.
Moreover under "Routing"-->"Transactions" I don't see these entries with the the current date.
Our routing rule is simple: "wildcard" "wildcard" "wildcard" "ALE (R/3 IDOC)"--><OUR SAP SYSTEM>
The SAP connection is working as I can test under "SAP..." menu.
Is there any other way to monitor what had happened with these XML files? I'm sure the BC processed as the files are gone, but there is no IDOC in the destination SAP...
Thanks a lot! -
Plugging XSLT / XML processors into Business Connector 4.7
Hi,
I need to use Xalan 2.6.0 and the associated XML parsers
in the Business Connector.
Does anyone know whether any built-in services or
SAP Adapter services would be negatively impacted by
this change? I have found nothing in the documentation.
(Among the reasons I need to do this are that the
processors in package com.inqmy.lib.jaxp do not seem to
be JAXP 1.2 compliant. Also, they neither respect the
encoding-attribute of <xsl:output>, nor allow to override
it from the outside. When generating HTML, this has
created problems for some clients).
In order to use Xalan/Xerces, one needs to set the
variable PREPENDCLASSES in server.bat to contain
the Xalan jars, and change the value of the configuration
variable watt.xslt.jaxp.properties in the server.cnf file.
The value of this variable is the name of a file in normal
Java properties syntax, which contains values for the
relevant System properties:
javax.xml.transform.TransformerFactory
javax.xml.parsers.DocumentBuilderFactory
javax.xml.parsers.SAXParserFactory
I'm using BC 4.7 SR2, Core Fix 2, JDK 1.3.1_09 under WinXP
At first glance everything seems to work fine (I can
still use recordToDocument), but I'd like to be sure.
And what about BC 4.6?
-- Sebastian Millies
IDS Scheer AGCheck out this weblog series for starters: /people/tobias.trapp/blog
Then I would suggest you post your question to the ABAP forum. -
JCO Timeout for SAP Business Connector 4.7
Environment :
Windows 2000, SAP Business Connector (BC) 4.7
General Description :
SAP BC is used to invoke BAPI's in the SAP R/3 system.
Issue :
Some BAPI's are taking some time to return response depending on user load. Need to provide a timeout for RFC calls invoked by SAP BC using JCO.
Following is the entry in the rfc trace log file when BC starts up ...
000000 -
2005-05-12 11:07:20 EDT
000001 [B2B-SAP.0011.0001] [JNI-LAYER] RFC.nativeSetTraceLevel() with rc = RFC_OK leave, [SUCCESS]
000002 [B2B-SAP.0002.0022] Log level set to 10
000003 [B2B-SAP.0002.0025] Registered SAP package trace with core trace
000004 [B2B-SAP.0002.0014] Starting SAP services
000005 [B2B-SAP.0011.0001] [JAV-LAYER] JCO.setProperty(jco.jdsr.comp_name, SAP BC server0023 5555)
000006 [B2B-SAP.0003.0001] Loading native libraries
000007 [B2B-SAP.0003.0002] JCO version: 2.1.4 (2004-10-20) sapjcorfc 2.1.4 (2004-10-20)
000008 [B2B-SAP.0003.0004] jRFCLibrary info: 2.1.4 (2004-10-20)(C:\sapbc47\Server\packages\SAP\code\libs\sapjcorfc.dll)
000009 [B2B-SAP.0003.0003] RfcLibrary version:
This RFC library belongs to the SAP R/3 Release *** 640,0,41 *** MT-SL
Versions of SAP internal libraries:
dptr: 2
ni : 37
cpic: 3
rfc : 3
00000A [B2B-SAP.0011.0001] MiddlewareRFC.setProperty(jco.middleware.wait_for_request_time, 1)
00000B [B2B-SAP.0002.0016] Loaded SAP server configurations
00000C [B2B-SAP.0002.0015] SAP services started
00000D [B2B-SAP.0011.0001] [JAV-LAYER] JCO.Client.setAbapDebug(false), current state false
00000E [B2B-SAP.0011.0001] [JAV-LAYER] JCO.Client.setTrace(true), current state false
00000F [B2B-SAP.0011.0001] [JAV-LAYER] JCO.Client.setAbapDebug(false), current state false
000010 [B2B-SAP.0011.0001] [JAV-LAYER] JCO.Pool.setMaxWaitTime(30000)
000011 [B2B-SAP.0011.0001] [JAV-LAYER] JCO.Pool.setConnectionTimeout(600000)
000012 [B2B-SAP.0011.0001] [JAV-LAYER] JCO.Pool.setTimeoutCheckPeriod(30000) on pool SERVER-300&USER_RFC&300&EN
000013 [B2B-SAP.0011.0001] [JAV-LAYER] JCO.PoolManager.addPool:
name = SERVER-300&USER_RFC&300&EN,
connection = USER_RFC|300|EN|AS=[11.12.7.296|00|]G0|,
pool_size = 10,
max_wait_time = 30000,
pooled_connection_timeout = 600000,
timeout_check_period = 30000
000014 [B2B-SAP.0005.0003] Pool changed: SERVER-300&USER_RFC&300&EN containing 0 connection(s)
007E72 [B2B-SAP.0006.0001] Executing invoke for ZBAPI_TEST_Service on SERVER-300
007E73 [B2B-SAP.0011.0001] [JAV-LAYER] JCO.Client.execute (ZBAPI_TEST_Service) on handle [2]
Questions :
1) Is there a SAP BC configuration parameter for RFC execution timeout ??
2) Any other way of enforcing the RFC time out ??
3) If there is a way to set timeout on JCO.Client.execute method ??
I really appreciate your help !!I have tried changes the connection timeout value but if doesnot affect the time RFC. Following is from SAP BC adapter guide ..
Delay (minutes) until an unused connection to a SAP
System is timed out (default: 5)
I think I need similar setting as that for RFC connection !! -
E-Filing on Business Connector version 4.8
Hello
We are currently running Business Connector (BC) 4.7 (which is out of support) & need to move to BC 4.8. I have installed this on a new server & now need to get E-filing running. Our database is at R/3 4.7
The only document I can find re: E-Filing makes no mention of BC 4.8 (only BC 4.7) - this is [https://websmp202.sap-ag.de/form/sapnet?_SHORTKEY=01100035870000588865|https://websmp202.sap-ag.de/form/sapnet?_SHORTKEY=01100035870000588865] and is called User Guide e-Filing Incoming Outgoing 3.0 (4.6C & above).pdf and is dated July 2005. My questions are:
1. Can anyone confirm that E-filing is supported under BC 4.8. There must be a support matirx somewhere on the SAP site which explains this but I can't find it.
2. Is there a more up to date document anywhere which explains how to install E-filing on BC 4.8. Or maybe the instructions in the document I have would apply to BC 4.8 as well?
Thanks, Chris
Edited by: Chris Hoggarth on Jun 24, 2010 4:30 PMI am not sure what you mean by "e-filing GB", but BC 4.8 supports the same functionality as BC 4.7, and adds some new functions. So should be no problem.
CSY -
Problem with Business Connector 4.8
Hi Everybody, first of all I would like to clarify that this is a question about SAP BC and NOT XI, but I did not know wherelse to put this message.
I have installed SAP BC 4.8. Created a new RFC map (SAP BC -> SAP) of a FM called Z_PO_GET_LIST.
Then went to Business Connector DEVELOPER and created an output template, XML type, for the output of the service.
When I test the service from the Business Connector SERVER it works perfect, I get as a result the desired XML with the PO Orders in the same format defined in the template.
When I test it from the Internet Explorer putting in the address bar http://localhost:5555/invoke/test/Z_PO_GET_LIST it also works great, and I get the expected XML as result.
The problem is when I try to cosume the service from an external .net application, I create an HTTP Client with all needed information (server, port, baseurl, etc) and when I send a POST to the service I get an XML with the result but NOT in the expected format (with all "value" tags instead of the tags that I defined in the template) but with this format:
<?xml version="1.0" encoding="UTF-8"?>
Values version="2.0">
<value name="serverName">IDES_SERVER</value>
<value name="$rfcname">Z_PO_GET_LIST</value>
<record name="ZPO_CABEZALES" javaclass="com.wm.util.Table">
<array name="cols" type="value" depth="1">
<value>CO_DATE</value>
<value>DOC_CAT</value>
<value>CREATED_ON</value>
<value>CREATED_BY</value>
<value>VENDOR</value>
<value>NAME1</value>
<value>CURRENCY</value>
<value>DOC_DATE</value>
<value>TARGET_VAL</value>
</array>
<list name="rows">
<array type="object" depth="1">
<value>1000</value>
<value>F</value>
<value>2002-10-16</value>
<value>GIESEB</value>
<value>0000001000</value>
<value>C.E.B.BERLIN</value>
<value>EUR</value>
<value>2002-10-16</value>
<value>5000.0000</value>
</array>
<array type="object" depth="1">
<value>3000</value>
<value>F</value>
<value>2004-05-04</value>
Does anyone please know how can I get the response from the service in the expected format (using the defined template) just in the same way I get it from the "test service" funtionality in the BC Server?
Any clue or help would be really appreciated and rewarded.
Thanks in advance,
Sebastian.Can you post what your expected XML result looks like ? The values structure is an internal structure of how BC represents that information. What types are you passing back as output variables in your service ? A recordlist ? Is it possible that you forgot to call a service step which converts document to string (so that you get the desired XML) ?
CSY
Maybe you are looking for
-
Install OS 10.2 on B&W G3 300
Hi All I gave up trying to install 10.3 on my G3 300, and have decided to have a go with 10.2. I note that I had to use this command to get the G3 to boot from the 10.3 CD: boot cd:,\\\\:tbxi (I got to use that by holding down OptApple+OF) This comma
-
Getting rid of a "download" icon appearing in Safari browser Flash Player
Please HELP!! I've inserted two screen shots to demonstrate what I'm trying to get rid of. Some months ago I downloaded the Free Video Downloader for Mac from here: http://www.iskysoft.com/free-mac-video-downloader.html I'm stuck with a very annoying
-
Fake Apple Inc. pages on Facebook
I would like to report some Facebook business pages that are posing as pages maintained by Apple Inc. These pages are not owned, maintained or operated by Apple Inc.; the original VERIFIED Apple Inc. business page was deleted awhile ago. In fact, one
-
This is like a hidden deal because I missed the staples 59 dollar deal on MX922 this weeked it was very short I guess anyway if you look at the specs the MX722 is the same as MX922 except for the lcd screen is 2.5 and doesn't come with cd/dvd tray.
-
Please HELP: Homesharing PCs don't see each other, but both are signed in
I just enabled home sharing on both my PCs, one is a windows 7 the other is a windows xp machine. Both machines now have home sharing turned on. You can verify it in iTunes by going to Advanced on the menu bar at the top of iTunes, and see that it s