Business Content and Data Sources automatic binding

Hi,
I am not clear about the Data Sources and Business Content sync.
If I transfer the datasources in SBIW(RSA5)  and replicate in BW, how it will automatically bind to the infosources and data targets when we activate the relevant infoobjects in BW Business content. As part of Business content activation, will it search for datasources and bind to it automatically? What steps are needed in order to make the everything hooked up correctly?
Can anyone clarify to me how it works? Please explain step-by-step.
Thanks.

Is there any addiotional things we need to do at info source level after activating the content? Selecting the correct data source etc.
If there is a enhancement to the extraction structure then what all steps manually  we need to do at info source level? When we replicate the data source which has been enhanced, will it create the infoobjects automatically so that they can be used in infosource communication structure?
As I am new to the system, I am running in to all these questions.
Appreciate any help in step by step how things will work.
Thanks.

Similar Messages

  • Need material on business content and data extraction

    hi
      friends
                iam new to BW i Need material on business content and data extraction  , plzz send me without help.sap material to my mail id [email protected]

    Hi,
    Pls check ur inbox....
    Also go thru this link....
    http://help.sap.com/saphelp_nw2004s/helpdata/en/37/5fb13cd0500255e10000000a114084/frameset.htm
    Hope it helps,
    Thanks,
    Happy Life,
    Aravind

  • Column Modification impact to Data foundation, Business layer and Data source in DS 1.2

    Issue
    An existing Business Layer that is consumed by a Data Source definition in Design Studio 1.2 Version: 12.0.2.201311041742 seems to invalidate the entire Data Source object after modification to the base tables DDL (data definition).  Information Design Tool used is Information Design Tool 4.1, Build:14.1.1.1036, Version: 4.1 Support Pack 1.
    Background
    A modification was needed a base tables DDL (data definition).  Specifically a column that stores the Date value as a varchar needed to update to a Date data type.  After the modification was completed the Data Foundation and Business Layer in the Information Design Tool (IDT) needed
    modification as well to reflect the updated column data type.  Refreshing the Data Foundation and/or the Business Layer did not update the column Data Type.  The step of dropping and re-inserting the updated table in the Data Foundation and subsequently the Business Layer updated
    the expected columns Data Type as expected. All the existing Data Source definitions that were in use throughout the application (Design Studio) were invalidated causing the following error after the DDL update.
    After rebuilding the Data Source definition in Design Studio, the issue was no longer there however, the existing Data Sources were still non-functional and were subsequently deleted.
    In Sum
    Is there another way to make changes to the base table(s) without negatively impacting the Data Foundation (IDT)àBusiness Layer (IDT)àData Source Definition (Design Studio) to the point where Data Sources on the Design Studio have to be redone preceded with similar effort at the IDT level?  Is there a step(s) that I missed?
    Any insight would be appriciated.
    Regards,
    Kris

    Hi Kris - it looks like you have not downloaded the latest SP's for Design Studio 1.2
    http://service.sap.com/sap/support/notes/1954748
    I recall in late May SAP issues SP2, and earlier in the year they issued SP1 - could you apply both SP's, client-side and platform-side?

  • Installation of Business content  and activation

    Hello,
    Our Source system is ECC 6.0 and
    BW :NW2004 S and SAP NetWeaver BI 7.0 .
    We are able to create source system conection successfully . after installing the business content and replication, all the data souces in BW are still in Version D only. Do i need to select each DS individually to activate ?  or am i missing any steps ?
    Any help is highly appreciated ? 
    Regards

    Hi,
    I was also passed this latest information from my colleagues in Product Management.
    The method I explained is the old method for activating DataSources and extractors. It is still valid in SAP NetWeaver 2004s but there is a new, and easier, methid to do this now.
    Also if you have followed my instructions, there is an additional change in the replication process and a decision you must make:
    <i>"Once the customer has activated the DataSource via rsa5 in source system, then he/she needs to replicate this datasource to BI. During the replication, he/she is asked via pop-up whether he would like to replicate these datasources as 3.X DataSource or 7.0.x DataSource.
    If he decides to replicate these datasources as 7.0.x DataSources, then the A version of this datasource will be seen in table RSDS, instead of the original table RSOLTPSOURCE.
    So if the customer checked table RSOLTPSOURCE, then he/she only see the D version.
    This could be the reason that customer still only see D version after the datasource replication."</i>
    The new method is:
    <i><b>"- If you have a 3.X datasource, during the source system connection, the D
    version of DataSource is already replicated into BI.
    - With transaction RSOR in BI, you need to select the related transfer rule, and via transfer rule you are able to collect the 3.X DataSource.
    - Then you need to push 'install' button to activate this datasource.
    - After activation, the A version of DataSource will be available in BI and in Source system.
    - If you have a 7.0.x DataSource, the steps are the same like 3.X datasource. But via transaction RSOR you are able to directly select this datasource (object type RSDS).
    So with BI capabilities of NetWeaver2004s technology, it's no longer nessary to run rsa5 in the source system to activate the datasource."</b></i>
    I hope this helps,
    Mike.

  • BUSINESS CONTENT AND LO EXTRACTION

    Hi ,
    Please tell me
    1) what is the main difference between BI content and LO extraction.
    2) What happens when we install business content and what happens when we do LO extraction.why are we doing this extraction.?
    3) Which process must be done first.
    and LO is for logistics extraction i.e. SD,MM etc.(please correct if i am wrong)
    4) what about extraction with respect to finance is there anything like LO extraction for finance also?
    please explain in simple english.
    regards
    lap.

    well,
    I think you don't have to care too much about what did the R/3 consultant; of course what they have configured will be reflected in BW. The configuration impacts on how the data is populated and if your business objects are populated in R/3. It may or may not fit with the business requirement and sometimes it gets complicated to represent the data in BW.
    But that's why we have the business content.
    So you activate BC objects you need to report on in BW. LO datasources and extractors will be part of this activation. Then you connect both systems and extract this data. You'll have to check with your business req if your extraction reflects the R3 data as wanted by definition.
    I a fresh server, you will then just customize and implement all the workbench necessary (IObjs, Cubes, ODS, transformations....). if your system is empty then you won't data to check! But you'll move your developpment to a BW QA or PROD sys which will be connected to a client in R3 having data (otherwise your SD consultants wouldn't be able to test either...)
    Replication: when a DataSource has been changed in the source system (R3), the BW receiving structure has to be adjusted. this is done via the replication procedure.
    The source system keeps a timestamp of when the DataSource has been reactivated the last time. BW has also this timestamp in its DataSource. When you change your DS in R3, the timestamp will be updated. If you request now data in BW from this DS, the system will complain because both DS (in BW and in R3) have different timestamps. That's why you have to replicate prior loading.
    The replication may inactivate follow up objects like extract structure, transfer structure and TRules.
    hope that helps...
    Olivier.

  • Changes In Business Content and Extractors after r/3 upgrade

    Hi All,
    We are in the process of upgrading from R/3 4.0b to ECC 6.0.
    with the BW system bein upgraded to BI 7.0
    Question.
    What changes would occur for the business content and extractors after the R/3 upgrade.
    Thanks in advace.
    Regards,
    Nikhil.S

    Hi Nikhil
    The datasources remain same, U can migrate them in BI side from 3.5 to 7.0 using RSDS -tcode.
    All extractors remains same, Well it again depends on the service packs u r using.
    Now the latest for BI is service pack 17 and for Business content patch is Patch 10.
    U can find new datasources like 0FI_GL_14 and 0FI_GL_40 and many other queries.
    In BI side
    1.If you have update rules you will have to create transformations and there is no shortcut here ..if there are routines you will have to write them as well and change the syntax as some of the old syntax of 3.x is no more valid in BI 7.
    2.Data loading concept changes as you can bypass the Infosource(but in few places you will need it actually like when you are directly loading from datasource to target and you want to read master data).
    3.DTPs will be required..changes in the Process chains for the same.
    4.Datasources need migration(first emulate them and test whether the Bi 7 loaidng is working or not otherwise if you migrate you will loose your transfer rule.
    Reward if helped
    thanks

  • Authorization objects for Process chain and Data source in BW 3.x

    Hi,
              Can any one tell me the authorization objects regaring process chain and Data source in BW 3.x versions. I guess we have auth objects for both of them in BW 3.5 that is S_RS_PC AND S_RS_DS .
    Can any one help me solving this issue
    Thanks
    Bharat

    Hi bharat
    I dont thin these objects are part of 3.0
    check from SU03 weather these objects are present in 3.o box
    In 7.0 they exist:
    http://help.sap.com/saphelp_bw33/helpdata/en/8b/134c3b5710486be10000000a11402f/frameset.htm
    TO see weather these objects exist:
    Go to Tools -> Administration ->User maintenance ->Information System -> Authorization objects -> Authorization objects by Complex Selection Criteria -> By Object Class. For the object class, enter either RS (for Business Information Warehouse objects)
    OR
    S_BCE_68001413 (Tcode for this rep)
    Thanks,
    Raj

  • Business content master data DataSources & change pointers

    Hi,
    Why general business content master data DataSources donu2019t have the behavior of the ones created for classification data with transaction CTBW. For the 1CL_* DataSources the corresponding message type RS* is created only when you run a delta initialization, and when you delete that initialization the change pointers for that message type become inactive. With general business content master data DataSources the change pointers are active all the time (even if you want to use those DataSources only for full updates). How can I, in BW, deactivate the change pointers for the DataSources Iu2019m not using?
    Thanks!

    I always assumed it was because BW hijacked the standard change pointers but in hindsight the change pointers are given a RS prefix so that must be wrong as the entries in BDPCV and BDCPS contain that prefix
    But I assume you can run BD22 for the RS change pointers for non processed ones
    Interesting question - I await other responses (my hunch is that they hijacked the BADI to write to the BD* tables and left the code in for RS* messages)

  • Is the a way to restore my iPhone 5 when it is no longer activated since i erased all content and data it keeps giving me this window that says my simcard is not recognizable does anyone know what to do?

    is the a way to restore my iPhone 5 when it is no longer activated since i erased all content and data it keeps giving me this window that says my simcard is not recognizable does anyone know what to do?

    Unfortunately yes, though technology would never move on if it kept to older standards and did not strive to do more.
    The app store always gives you the option to use a previous version of the app IF it is available for your device.
    Sorry but you are stuck without new hardware.
    PJRS

  • Creation of a generic extractor and data source for the FAGLFLEXA table

    Hi All,
    Need to create a generic extractor and data source for the FAGLFLEXA table to support AR reporting. This table contains the necessary profit center information to perform LOB reporting against the AR data.
    Please advice on how to do this.
    Regards, Vishal

    Hi Vishal,
    Its seems a simple a work out.
    1.Go to RSO2 & choose the relevant option ie. whether you want to create Transactional DS, Master Data DS or Text DS.
    2. Name it accordingly & then create.
    3. Give description to it & then give table name FAGLFLEXA.
    4. Save it & activate. If you need it to be delta enabled then click over Delta & you can choose accordingly.
    If you still face some problem then do mail me at [email protected]
    Assign points if helpful
    Regards,
    Himanshu

  • Creation of connection pools and data sources

    Hi,
    is there a possibility to create jdbc connection pools and data sources not manually, with a script or a mbean?
    That would be helpfull, because at the moment every developper has to do that for himself (because of the individuals generated passwords).
    Thanxs

    The weblogic.management.configuration.JDBCDataSourceMBean
    defines a non-transactional JDBC data source.
    http://e-docs.bea.com/wls/docs90/javadocs_mhome/weblogic/management/configuration/JDBCDataSourceMBean.html
    The JDBCConnectionPoolMBean defines a JDBC connection pool.
    http://e-docs.bea.com/wls/docs90/javadocs_mhome/weblogic/management/configuration/JDBCConnectionPoolMBean.html

  • Time taken to clear content and data

    I have just cleared the content and data from my 64G Ipad1, and it has been showing the Apple icon with progress bar (with no progress at all) for the past 3 hours.  May I enquire how long does it usually take??
    THe ipad does not respond at all now and it worries me.  Is it normal??
    Thanks in advance for the inputs.

    It shouldn't take but a minute or two.
    You need to restore the device.
    iTunes: Backing up, updating, and restoring your iPhone, iPad, or iPod touch software

  • Data View and Data Source buttons Greyed out

    I have Site Admin permissions on an On Prem SharePoint 2013 site.
    In SharePoint Designer 2013 the Data View and Data Source buttons are greyed out.
    Can anyone shed some light as to why this is occurring?

    Hi grantzre,
    Could you provide a screenshot about the location you want to insert the Data View web part and Data Source?
    I think you may put the mouse cursor in the incorrect place to add the data view web part, please try putting the cursor before the tag </ZoneTemplate> and see if "Data View" button is enabled, then you can insert an empty
    dataview web part and then insert the data source in tag <DataSources> by clicking ribbon button "Data Source" (also click the ribbon button "Parse HTML" of the page if needed).
    Thanks
    Daniel Yang
    TechNet Community Support

  • How to find unsued Transfer Rules and Data Sources for a Master Table...??

    How to find unsued Transfer Rules and Data Sources for a Master Table...?? My requirement is i need to delete those Transfer rules and Data Sources which are not in use

    Hi
    Go to manage of the Text or attirbute of the master data object, see what are being loaded daily from there and delete the remaining.
    Cheer
    Ans as expected, Please reward

  • How can i delete content and data in iphone5 i bought wherein the previous owner forgot his icloud password?

    I bought an iphone5 from a friend and I want to delete his content and data from the phone but he cannot remember his password, how can I reset this iphone?

    Figster512 wrote:
    open the Settings app, then click General, then scroll all the way down and click Reset, then click Erase All Content and Settings.
    Which will not work if he doesn't know the password for the Apple ID used in iCloud for Find My iPhone.
    Hence, Csound1's question about Find My iPhone...

Maybe you are looking for