Business Content and Metadata Repository

Hi
Can any one point me to the right place or if any one know any thing please through some tips on this
What are the benefits of using Business Content?
What is the importance of Metadata repository?
Thanks
Farooq

Hi Syed Farooq,
Business Content is a pre-configured set of information models based on consistent metadata in the SAP BW.
BI Content makes the supply of information available to those roles in an enterprise that require this information to complete their tasks.
BI Content consists of roles, workbooks, queries, InfoProviders, InfoObjects, InfoSources, transformation rules and extractors for SAP systems and any additional applications that have been selected.
There are lot Adv like BW implemention is accrelarated and so on check the link:
http://help.sap.com/saphelp_nw04/helpdata/en/3d/5fb13cd0500255e10000000a114084/frameset.htm
here are some of the load erros which were already discussed in forums..pls go thru them...
Business Content :
SAP Business Information Warehouse delivers pre-configured objects under the collective term Business Content. These objects speed up the implementation of the SAP Business Information Warehouse because they deliver complete solutions for business information requests.
Business Content includes:
· R/3 extractor programs
· DataSources
· Process chains
· InfoObjects
· InfoSources
· Data targets (InfoCubes and ODS objects)
· Variables
· Data mining models
· Queries
· Workbooks
· Crystal Reports
· Web templates
· Roles
Since Business Content are Predelivered we use them , It can reduce considerable amount of time which will be needed if you going for a generic extarction
Hope it helps.
Dnt 4gt to Assign Points.
Thanks.
Regards,
Jayaprakash.J

Similar Messages

Access content and metadata stored in VCR using SP1 api in weblogic Portal

Hi
I have configured Virtual Content Repository (VCR), I am able to see all the contents in VCR, that is stored in Oracle UCM. I need to know how I can get the content and metadata of the stored content using SPI api and display the metadata of contents present in a particular folder and display it in weblogic portal.
Please provide any sample code how to acess that also helap me a lot.
Edited by: user10934682 on Apr 19, 2011 1:39 AM

To get started, you might want to look at the CM JSP tag library. With this tag library, it's straight forward to fetch a content Node and display the data. See the following tag lib documentation: http://download.oracle.com/docs/cd/E15919_01/wlp.1032/e14256/content/cm/tld-summary.html
The tag doc includes some sample code showing the usage of the tags.
For more advanced, or non-JSP usage, see the javadoc for com.bea.content.federated package. http://download.oracle.com/docs/cd/E15919_01/wlp.1032/e14255/com/bea/content/federated/package-summary.html
Brad

Changes In Business Content and Extractors after r/3 upgrade

Hi All,
We are in the process of upgrading from R/3 4.0b to ECC 6.0.
with the BW system bein upgraded to BI 7.0
Question.
What changes would occur for the business content and extractors after the R/3 upgrade.
Thanks in advace.
Regards,
Nikhil.S

Hi Nikhil
The datasources remain same, U can migrate them in BI side from 3.5 to 7.0 using RSDS -tcode.
All extractors remains same, Well it again depends on the service packs u r using.
Now the latest for BI is service pack 17 and for Business content patch is Patch 10.
U can find new datasources like 0FI_GL_14 and 0FI_GL_40 and many other queries.
In BI side
1.If you have update rules you will have to create transformations and there is no shortcut here ..if there are routines you will have to write them as well and change the syntax as some of the old syntax of 3.x is no more valid in BI 7.
2.Data loading concept changes as you can bypass the Infosource(but in few places you will need it actually like when you are directly loading from datasource to target and you want to read master data).
3.DTPs will be required..changes in the Process chains for the same.
4.Datasources need migration(first emulate them and test whether the Bi 7 loaidng is working or not otherwise if you migrate you will loose your transfer rule.
Reward if helped
thanks

Need material on business content and data extraction

hi
friends
iam new to BW i Need material on business content and data extraction , plzz send me without help.sap material to my mail id [email protected]

Hi,
Pls check ur inbox....
Also go thru this link....
http://help.sap.com/saphelp_nw2004s/helpdata/en/37/5fb13cd0500255e10000000a114084/frameset.htm
Hope it helps,
Thanks,
Happy Life,
Aravind

Installation of Business content and activation

Hello,
Our Source system is ECC 6.0 and
BW :NW2004 S and SAP NetWeaver BI 7.0 .
We are able to create source system conection successfully . after installing the business content and replication, all the data souces in BW are still in Version D only. Do i need to select each DS individually to activate ? or am i missing any steps ?
Any help is highly appreciated ?
Regards

Hi,
I was also passed this latest information from my colleagues in Product Management.
The method I explained is the old method for activating DataSources and extractors. It is still valid in SAP NetWeaver 2004s but there is a new, and easier, methid to do this now.
Also if you have followed my instructions, there is an additional change in the replication process and a decision you must make:
"Once the customer has activated the DataSource via rsa5 in source system, then he/she needs to replicate this datasource to BI. During the replication, he/she is asked via pop-up whether he would like to replicate these datasources as 3.X DataSource or 7.0.x DataSource.
If he decides to replicate these datasources as 7.0.x DataSources, then the A version of this datasource will be seen in table RSDS, instead of the original table RSOLTPSOURCE.
So if the customer checked table RSOLTPSOURCE, then he/she only see the D version.
This could be the reason that customer still only see D version after the datasource replication."
The new method is:
"- If you have a 3.X datasource, during the source system connection, the D
version of DataSource is already replicated into BI.
- With transaction RSOR in BI, you need to select the related transfer rule, and via transfer rule you are able to collect the 3.X DataSource.
- Then you need to push 'install' button to activate this datasource.
- After activation, the A version of DataSource will be available in BI and in Source system.
- If you have a 7.0.x DataSource, the steps are the same like 3.X datasource. But via transaction RSOR you are able to directly select this datasource (object type RSDS).
So with BI capabilities of NetWeaver2004s technology, it's no longer nessary to run rsa5 in the source system to activate the datasource."
I hope this helps,
Mike.

BUSINESS CONTENT AND LO EXTRACTION

Hi ,
Please tell me
1) what is the main difference between BI content and LO extraction.
2) What happens when we install business content and what happens when we do LO extraction.why are we doing this extraction.?
3) Which process must be done first.
and LO is for logistics extraction i.e. SD,MM etc.(please correct if i am wrong)
4) what about extraction with respect to finance is there anything like LO extraction for finance also?
please explain in simple english.
regards
lap.

well,
I think you don't have to care too much about what did the R/3 consultant; of course what they have configured will be reflected in BW. The configuration impacts on how the data is populated and if your business objects are populated in R/3. It may or may not fit with the business requirement and sometimes it gets complicated to represent the data in BW.
But that's why we have the business content.
So you activate BC objects you need to report on in BW. LO datasources and extractors will be part of this activation. Then you connect both systems and extract this data. You'll have to check with your business req if your extraction reflects the R3 data as wanted by definition.
I a fresh server, you will then just customize and implement all the workbench necessary (IObjs, Cubes, ODS, transformations....). if your system is empty then you won't data to check! But you'll move your developpment to a BW QA or PROD sys which will be connected to a client in R3 having data (otherwise your SD consultants wouldn't be able to test either...)
Replication: when a DataSource has been changed in the source system (R3), the BW receiving structure has to be adjusted. this is done via the replication procedure.
The source system keeps a timestamp of when the DataSource has been reactivated the last time. BW has also this timestamp in its DataSource. When you change your DS in R3, the timestamp will be updated. If you request now data in BW from this DS, the system will complain because both DS (in BW and in R3) have different timestamps. That's why you have to replicate prior loading.
The replication may inactivate follow up objects like extract structure, transfer structure and TRules.
hope that helps...
Olivier.

BI 7 Authorizations: Business Content and usage of which Objects?

Good day
I am busy with the BI 7 Analysis Authorizations concept. I have gone through SDN as well as other sites and obtained numerous guidelines for applying these authorizations. I will not be utilising the migration tool as I will be creating the new analysis authorisations from scratch.
I have replicated the datasources in the myself system.
In ALL documentation it is stated that business content must be activated for objects u20180TCAu2019 and u20180TCTu2019, which I have a problem with.
I do not have a problem with the related InfoObjects and activation.
What I have seen from the metadata repository is:
InfoCubes
u20180TCA_HIEu2019, u20180TCA_UAu2019 and u20180TCA_VALu2019 (These are all cubes without datasources, transfer rules, TRF or DTP etc)
DSOu2019s
u20180TCA_DS01u2019 to *DS05u2019u2026. (These are all templates without datasources, transfer rules, TRF or DTP etc)
Also DSOu2019s u2018ZTA_DS01u2019 and u2018ZTA_DS02u2019, not part of the 0TCA* and 0TCT* selection. Are these two necessary?
My question(s) are:
1)     What I want to know is how many DSOu2019s and Infocubes must be activated to ensure complete installation?
2)     Why do the Cubes and template DSOu2019s (0TCA* and 0TCT*,) not display any datasources, TRF, transfer rules or DTPu2019s at all?
3)     Why are DSOu2019s u2018ZTA_DS01u2019 and u2018ZTA_DS01u2019 involved if no-one has ever mentioned them?
Please assist. I am very confused at this stage!
Thanks in advance
Cj

Hi Cornelius,
as you already mentioned in a previous Thread, you're new in bi 7.0 auth, check this out:
http://www.mariewagener.de/node/135
and the famous note Note 1000004 - Merging and optimizing analysis authorizations
Best,
Maik

SAP BW Business Content and R/3 Tables

Good morning
I wonder if you can help me.
I am at a BW-MM implementation.
From where I can get a list of Business Content extractors and tables which is supplied by R / 3.
For example:
0EC_PCA_1 -> GLPCT
I need this information to implement the MM module in BW, but if you have or can help with additional information from other modules I will be grateful.
I await your help and thank you very much!
Javier.-

Hi,
Check the BI content.
http://help.sap.com/saphelp_nw04/helpdata/en/37/5fb13cd0500255e10000000a114084/content.htm
Go to the original page from there by clicking the arrow buttons.
There you can see your functional areas.
For example, to find 0EC_PCA_1, you will go to Financials--> Profit Center Accounting > Datasources> PCA transaction data.
For MM, go to Supply Chain Mgmt --> Supply Chain Performance Management --> Procurement
Here you can find what tables the extractor is based on.
-RMP

Business Content and Data Sources automatic binding

Hi,
I am not clear about the Data Sources and Business Content sync.
If I transfer the datasources in SBIW(RSA5) and replicate in BW, how it will automatically bind to the infosources and data targets when we activate the relevant infoobjects in BW Business content. As part of Business content activation, will it search for datasources and bind to it automatically? What steps are needed in order to make the everything hooked up correctly?
Can anyone clarify to me how it works? Please explain step-by-step.
Thanks.

Is there any addiotional things we need to do at info source level after activating the content? Selecting the correct data source etc.
If there is a enhancement to the extraction structure then what all steps manually we need to do at info source level? When we replicate the data source which has been enhanced, will it create the infoobjects automatically so that they can be used in infosource communication structure?
As I am new to the system, I am running in to all these questions.
Appreciate any help in step by step how things will work.
Thanks.

Installing Business Content and Merge - Overwrites InfoSource - Very Urgent

Hi Gurus,
I was installing Business Content for a Cube with the grouping Data flow before using Merge/Copy option in DEV.
The cube got activated and all the objects associated with it. What I didn't realize was that the InfoSource used for the DSO of the cube was also used by a custom DSO which has already been deployed in QA.
So the transfer rules were only partially maintained and the content InfoSource merged with the active one. The DataSource for the custom DSO is from QA (a different R/3 from DEV R/3). The issue is that the custom DSO in QA is now linked to the installed (new) InfoSource belonging to the DataSource of the DEV R/3.
Please kindly guide on:
1. How to change the InfoSource for the custom DSO from the currently installed one to the original one? Can I deactivate the update rules and create new InfoSource and transfer rules for the custom DSO and transport it again to QA?
2. What are the implications this might have on the newly installed DSO & Cube?
All answers will be suitably rewarded.
Thanks,
Swetha

Hi Swetha,
I am not too sure, if i understood ur problem correctly but,
If your BI QAS system is still good.. that means ur custom DSO is still linked to old version of Infosource in BI QAS.
The talk to ur BASIS guys and ask them to transport the Insource/Transfer Structure from BI QAS system to BI Dev system.
This can be done by creating a transport in BI QAS system, the type of transport should be Transport of Copies.
and also before importing this Trasnport from BI QAS in BI Dev System maintain an entry in BI Dev system RSA1>Tools>Conversion of Logical System names and put an entry as Source = ur BI QAS Logical System Name and target as ur BI Dev Logical System name.
Cheers
CK

Business content and extractors :material

hi all,
any body having the business content material
please forward to my mail id:[email protected]
thanks
bondu

Hi Bhaskar,
Check this SDN link. You can find a lot of documents on Business content & Extractors
https://www.sdn.sap.com/irj/sdn/docs?rid=/webcontent/uuid/ac0ca14e-0a01-0010-7596-c8756f80a56e [original link is broken]
Regards,
R.Ravi

Business content and extractors

what is the difference between v1,v2 and v3

Hi dear and welcome on board!
Look here to have more detail about your question and this topic...
/people/sap.user72/blog/2005/01/19/logistic-cockpit-delta-mechanism--episode-three-the-new-update-methods
Hope it helps!
Bye,
Roberto
...and please don't forget to reward the answers...it's THE way to say thanks here!

Usage of MDM's material master relevant XI Content and Business Content

Dear all,
In MDM's material-relevant XI content, there's a message interface "MDMMatmasIn". But in the demo system this interface is not used to write material master data to file. The IDoc type MATMAS.MATMAS05 is used instead. No mapping is used. May I ask why?
I tried the 00_MATMAS05_R3.map file and can import file in the format of MATMAS.MATMAS05. But some value mappings are not done and have to be added manually. Do I miss precedent steps?
In MDM Business content, there're lots of import map files like 00_MATMAS05_R3.map and 03b_Units_SAP_R3.map. During the data consolidation procedure, should we just use one map to import the IDoc-XML file? Shouldn't we first use other map file to fill the lookup tables? If not, what are those map files used for? Is there any document about the usage of those map files?
Very sorry for asking so many questions. I'm very new in this area and desperately need help...
Best Regards
Jerome

Hi Christiane,
Thanks for the document. But I didn't find how to import the customization data into the lookup tables. For example, in the MDM standard business content, the "Material" repository contains a lookup table "Material Type". It doesn't contain the values like "ROH" and "HAWA". How can we fill such tables?
And the standard map "00_MATMAS05_R3" doesn't automatically add such values into lookup table by value mapping. When I tried to import a material master, I had to manually modify this map. Is there any solution to this problem?
Best Regards
Jerome

BI LSO - use of business content: problem and limitation

Hi,
we are working on BI to develop some reports from LSO data. We are using 0HR_LSO_1 and 0HR_LSO_3 for participation and resource reservation and a lot of custom datasources from infotype 1001, 1000, 1042, 5007, and so on.
We have met lot of problem in modelling a simple and flexible BI data model, because of lack of information from business content and time dependent maintenance of many information.
Just to report few of the problem we have, we notice that
1. no link between EK and D object is extracted by standard datasource, so no information is there if a D as been attemped as a single course or as a course between several from an EK object;
2. no master data is there for the 0LEARNER characteristic and no link is there with 0EMPLOYEE to better describe P object; if participant is not a P object, you don't have any information about it (!);
3.no master data is there for the 0TRAINTYPE characteristic; we needed to add lot of information to better describe the D object (!);
3. presence of 0TRAINGROUP in participation datasource may cause doubled of information (doubled count of participation) if D object is located under several L object in ovelapping time interval;
3. resource reservation datasource is not able to extract data if resource type is not defined in LSO;
4. performance is quite poor caused by lot of calculation doing by FM "read_infotype_1001" type;
5. no pre-enrolment is considered in business content;
6. no link between resource and participant is there, so you cannot provide any report of type "who partecipate to the edition with this reource type" in a simple way;
We have to develop lot of custom to handle lot of problem like those; so I would like to share experience in BI LSO data flow design and development: please let me have your observation.
thanks in advance.
L

Any experiences / contributions / documentations to share ?

Business Content - Version Comparison

Hi Folks,
I have a request to provide a list of activated business content objects which have been modified.
I can tell if business content has been installed when I go to Administrator Workbench - Business Content and collect an object. I can also find out more details on differences between the delivered version and the active version using RSD1. If I want a list of active objects, I can go to the metadata repository
However, is there a list or report available to give me list of business content active objects which do not match the delivered version? If not I would like to develop a report.
Any ideas would be helpful,
Thanks,

Try installing the business content for exploring system objects such as
Content Browser (INFOAREA 0BWTCT)
BW Metadata (INFOAREA 0BWTCT_META)
Once you have installed the InfoCubes, infoobjects, etc. Install the related queries to these cubes. Setup the infopackages, load masterdata first, then load the cubes (for content browser, metadata is a remote cube and thus doesnt require dataloading).
Then execute and explore the varios queries. At the very least, it will help you to identify the activated business content that you use. As for comparing the installed content to the delivered content, that might be a bit trickier or more of a manual process. There are also other business content that may be worth exploring for your purposes.
Also of note, the content browser in BI 7.0 already indicates that it is obsolete, but the infocube indicates the new alternative for this.
These reports are also useful for tracking the customer defined objects and queries. Also please note that if you copied business content to a customer name space (0FIGL_V03 --z ZFIGL_V03) that these objects will most likely technically not show up as business content in the reports.
Hope this at least helps or solves your question.
Victor Ayers

Business Content and Metadata Repository

Similar Messages

Maybe you are looking for