Business Content content problem in BI 7.0

Hi all,
We have installed here ECC 6.0 and BI 7.0 .
Problem:
In Business Content we hardly have any standard content which can be activated;
like if we click on ROLES - we are getting only OTHER ROLES,
and when we are clicking on INFOPROVIDERS we are getting only one node .i.e. TECHNICAL CONTENT.
Can anyone suggest what needs to be done to get the standard values in the Business COntent. Do we need to apply any node/patch for this...
Thanks and Regards,
Sudipto.
Message was edited by:
Sudipto Barman

Hi Sudipto,
I guess the BI Content component is not installed in your BW system. Goto System(from menu) -> Status -> Near Component version there is a detail button , click it -> check whether "BI_CONT" is installed. If not, then ask your BASIS to install it.
Bye
Dinesh

Similar Messages

Adobe Content Viewer problem. Please Help me...

Hi after updating online. Folio, I tried to update the trial version of the publication on my iPad but I get this message: "the issue isavailable for dowload, but new signing for an application version. Update the application from the App Store. "I went to the AppStore and was not any update of the Content Viewer ... I deleted the version on my iPad I downloaded again ... but without success gives me the same problem ... Please help me ... how can I do??
thanks

Hello Bob and thank you for responding so quickly ... Would you be kind enough to send me the link where I can download older versions of Folio Builder and Folio Producers Panel tools for InDesign 5.5. I'm looking for them but I can not find them.
Thank you for your patience.
Il giorno 21/gen/2012, alle ore 16:18, Bob Levine ha scritto:
Re: Adobe Content Viewer problem. Please Help me...
created by Bob Levine in Digital Publishing Suite - View the full discussion
As discussed in numerous threads already, the new viewer has not been approved by Apple yet.
If you’re a pro or enterprise customer you can create your own viewer app. If not, you’ll have to wait or roll back to the older tools.
Bob
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4155907#4155907
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4155907#4155907. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Digital Publishing Suite by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

How to debug file content conversion problems?

Hi,
I'm trying to debug a file content conversion problem. I'm mapping a few nodes in an IDOC to a file of fixed length fields. I'm using the "<Node A>.fieldFixedLengths", "<Node B>.fieldFixedLengths", "<Node C>.fieldFixedLengths", etc. parameters to specify the fixed length records.
However, a certain node (for e.g. Node B) is causing a problem and if it is present in the IDOC, the output file does not get created. Upon checking the XI monitor, I notice that the file gets mapped correctly and thus the problem lies when the file adapter does the file content conversion. How do I debug this because there is no descriptive error in the XI log? If this node is not present, the file gets generated fine.
Thanks,
Basant Gupta

Hi,
If your SXMB_MONI shows, success status, then go to RWB->Message Monitoring->Message display tool and then check Audit log for the analysis,
So it wil help you debug the situation.
If there is no error, then check RWB->Component Monitoring->Adapter Monitoring for you file communciation channel..
/people/michal.krawczyk2/blog/2005/01/02/simple-adapter-and-message-monitoring
Regards,
Moorthy

Moving Business Model Contents

Hi.
I need to move a business model content into another one without affecting presentation catalog.
I moved the fact table, the dimension tables, and the dimensions (except one that is already present in the destination busienss model).
I've got an error ...
Which is the best way to do it ?
Thanks,
Andrea

You can write click your business model , and choose to duplicate , with or without corresponding Pres. Catalogue.
Otherwise you should be able to shift select, right click copy and paste. You may want to do this in smaller groups, ie fact tables, then logical dims, then hierarchies.
I've also see some joins not get copied before, and importantly, the content levels on LTS's and measures - I've seen those not get copied also.
Hope this helps.
Alastair

Content protection problem

Hi. I've got that content protection problem when downloading from blackberry app world. Every time I try to download something, a message comes up that says, "An error has occurred communicating with the BlackBerry App World Client. If you have content protection enabled on your device, please disable and try again,". I'm sure a lot of people had this problem and many of them have had their problem solved, but i've already tried solutions like disabling the encryption and doing the battery pull but the message still comes up.
Are there any other solutions that I can try?
Thank you in advance

Hello timothyW,
Welcome to the forums.
Have a look at this article for help changing the content protection settings on your BlackBerry® smartphone.
KB11963
How to change the setting for Content Protection on the BlackBerry smartphone
Hope this helps. Have a good day.
-SR
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Usage of Business Objects content in VC

Hello,
Is it possible to embed Business Objects content (web-Intelligence, Crystal Reports) into VC based composite applications?
I know that Xcelsius can be embedded, but what about the rest (Including Pioneer).
Best regards
Thomas

Hi Thomas,
it depends on what do you expect by embedding these applications.
You can easily embed them via URL or iView, but then you only display them, but I assume that you need any data communication between VC and the Business Objects applications, which is not possible as far as I know.
Cheers,
Marcel

Extended Content type problem

Extended Content type problem
I want to extend the content type 'ExtendDocument' from 'Document'.
So I use 'Oracle Internet File System Manager' to create a new Class Object named 'EXTENDDOCUMENT', which is extend from 'DOCUMENT', and add a attribute 'EXTENDURL'.
This Class Object's bean class is 'ifs.beans.ExtendDocument' and server class is 'ifs.server.S_ExtendDocument'.
I create these 2 java class and put the class files to ORACLE_AS_HOME\ifs\cmsdk\custom_classes directory.
As I want to set the object type as 'ExtendDocument' when uploading a file which expend name is '*.wmv', so that need to change 2 default value 'ParserLookupByFileExtension' and 'IFS.PARSER.ObjectTypeLookupByFileExtension'
So I add 'name=wmv, datatype=STRING, value=oracle.ifs.beans.parsers.ClassSelectionParser' to ParserLookupByFileExtension.
And then add 'name=wmv, datatype=STRING, value=EXTENDDOCUMENT' to IFS.PARSER.ObjectTypeLookupByFileExtension.
After done above actions, i restart my oracle application.
I use CUP to upload a test file 'test.wmv' to CMSDK repository, and its type is 'EXTENDDOCUMENT'.
But if I use FTP or WebStarterApp application to upload 'test.wmv' file to CMSDK repository, then its type is 'DOCUMENT'.
Why and how to change to make FTP and WebStarterApp application can upload *.wmv file's type as 'EXTENDDOCUMENT'?
anybody can help me?
thanks.

Nirav-P-Thakar wrote:
FileNameMap fnmMime = URLConnection.getFileNameMap ( ) ;
fnmMime.getContentTypeFor(fileName);
URLConnection.guessContentTypeFromName(fileName);I have tried out both methods but it returns null when the file is of type MS Office or Open Office.In reply 1 BalusC said..
"Alternatively you can use ServletContext#getMimeType() for this. It guesses the content type based on the mime mapping as it is been definied in the web.xml of the application server and the webapplication. If it returns null, then you need to add new <mime-mapping> entry to the web.xml."
I would try doing it this way. Try including entries for the mime mappings in the deployment descriptor of the web application.

Business Package Usage Problem

Hi. I have installed BP for Common Parts in my EP7.
I have assigned user to role from this BP. But when I trying to log in with whis user I only see message
" Page not found or not available ".
Can can I fix it?

Hi,
Provide the Permission to the role.
Go to --> System Administration > Permission> Portal Content>Content Provided by SAP> click on it.
Under Permission Editor Search for the User and Provide Full Control.
It will work.
have you created System Object(Alias) for that......
Regards,
Naresh
Edited by: Naresh Kumar on Nov 25, 2008 1:14 PM

Business Content Display Problem in SAP BW 3.5

Hi BW Gurus,
We are facing some tricky problem in BW 3.5
Details are below.
PI_BASIS     2004_1_640     0006     SAPKIPYI66
SAP_BW              350                     0009     SAPKW35009
BI_CONT              353                     0005     SAPKIBIFP5
in RSA1 Trcode am not able to see Business Content tab at all,but when i click on Transport Connection tab then i could see Business Content tab but NO objects are displayed in left Frame like InfoProviders by InfoAreas ,InfoObjects by Applicaton Component ,and even when i use the RSORBCT Tcode also the same sort of display.
Has anyone faced this problem earlier and solved if YES pls help in this regard as it is very urgent for me.
Regards,
BRB

#1. Check your SAP GUI version.
#2. I recently had what MIGHT be a similar problem. In using BEx WAD, my screen did not correctly display some of the components. The cause was a file that held status information on my screen properties, a file that had become corrupted. To solve the problem, all I had to do was log off all SAP components, then delete all files in the directory c:\documents and settings\[userid]\Local Settings\Temp.
Worked for me. If it works for you, email me an ice-cream cone!
Good Luck,
Doug

Business content installation problem

Hello
When I am trying to install SD cubes through with Business content with the setting of data flow before and after , I am getting the Transfer rules .....basically I am looking for data flow in BI7 , like Transformation and DTP ? , how I will be able to install whole dataflow in BI7 method .
I am in BI7.
Regards,

Hi Akshay,
In BI7 we don't have standard Transformation(BC) so we have to install transfer rules and update rules then try to migrate 3.x to 7.0 data source after that you can create transformation manually,
Its better to install BC with grouping only necessary object coz when you select grouping after or before it will search whether you have authorization to activate ds in source system r not then if you don't have authorization you may get errors.
Then migrate the 3.x data source to bi7 data source by using rsds tcode.
Refer sapnote_0001052648 for migration
Regards
Vivek

Business content activation problem ?

Hello ,
I am trying to activate material movement multiprovider with data flow before and after option .
Logically with this option , all infoobject should also get activated which is related to this multiprovider , but in my case it is not happening , and i have to activate this multiprovider separetly which is very lenthy job .
Could you please advice me , why it could happen and how to solve ?
Regards

Hi Akshay,
First can u give us the error for the infoobject you getting?
Second please select the grouping mode "before" only. I say this because in before and afterward collection mode there could be multiple of objects and dependencies on it which could create an error while activating the multiprovider.
So please do change your collection mode and try activating MP again. You wont be able to view the standard reports on the MP but you can collect this again by selecting the grouping mode "Only necessary objects" and check the query box. It will activate & install the std queries on infobjects.
Do send the long text for the error message if you receive any.
hope this helps.

File Content Conversion Problem of not generating empty file

Hi All,
i have 3 input text files for my BPM to process.
if any of the text file is empty, i need to generate an alert message that the file is empty........but the problem is file adapter does not generate a XML message for the empty text file..........
<b>Can anybody suggest how to generate the alert if any of the 3 text files is empty.</b>
Thanks,
Rajeev Gupta

Rajeev~
I dont find ur mail Id in ur Business card.Post the same..I will send you across a PDF with steps to write a adapter module.You would need to extend the same to check the payload for empty data and accordingly create a XML payload with checkpointer.
For validating this value in a BPM use the FORK step and check the payload in the condition editor.
Refer to this url for the same.
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/bb/e1283f2bbad036e10000000a114084/content.htm">http://help.sap.com/saphelp_nw04/helpdata/en/bb/e1283f2bbad036e10000000a114084/content.htm</a>

Content Activation Problem

Hi,
I have a problem in activation business content for some BI infoobjects. We have upgraded from BI 3.5 to 7.0. But some of the objects are not activated.
So i was trying to reactivate them and following are my concerns.
If i consider revised version and activate it, do i get object upgraded to 7.0 version.
If i consider the active version, then is it represents 7.0 version.
or do i need to install it from scratch from 7.0 business content.
Regards,
Vijju.

Hi Vijju,
Please try activation the revised version. The revised version is the 7.0 version. You should be fine with the activation of revised version.
Don't consider the Active version of the object that is available. You are safe with activation of revised version or install the infoobject from scratch.
-Sreek

Content Management problem

Hello all,
I am working with KM 5.0 SP 5 on two different portal environments, dev and qa. Everything seems to be working fine in qa (we installed there first), but I cannot get content management working in dev. Unfortunately, when we installed in qa, we had lots of problems getting it to work and did not get a good procedure documented for configuring content management.
The problem that I'm having is when I go to 'Collaboration Admin', I receive an error in 'Initial Role Assignment' that reads:
Java iView Runtime
Version : 5.0.200212121529
(c) 2001 SAP Portals
The following exception occurred while processing your request:
com.sapportals.portal.prt.runtime.PortalRuntimeException: Exception ID 07:51_04/02/05_0014
I get the same thing when I click on the 'Collaboration Room Administration', 'Initial Role Assignment', and 'Template Builder' iViews in the 'SAP Collaboration Room - Infrastructure: Collaboration Admin' channel.
I have installed the following business packages in dev:
BP Collaboration Room - General Template_50_1_1
BP Collaboration Room - Infrastructure_50_1_1
SP_FCS_SAP Collaboration Room - Infrastructure_50_1_5
BP Collaboration Room - Project Template_50_1_1
Business Package for Portal Users_50_5_1
BUSINESS PACKAGE FOR COMMUNICATION_50_4_6
Something interesting that I've noticed is the 'Collaboration Room Administration' iView. There appears to be some differences in the names of the Java attributes for this iView in dev and in qa. In qa, where the iView works, there are attributes called:
Technical Name of WhoIsWhoMini Java iView
Technical Names of Room Template Worksets (Separated By Semi-Colons)
But in dev, the same attributes are called:
Name of WhoIsWhoMini Java iView
Names of Room Template Worksets
Both iViews are based on the com.sapportals.pct.troom.ad.trwizard iView. I'm guessing that indicates some sort of inconsistancy between the instances, but I don't know where to look. I don't know if this is related to the Java error that I'm getting when I try to preview the iView, but I thought I would mention it.
Can anyone give me some insight on what to do here?
Thanks!
-Stephen Spalding
Graybar
Web Developer

Hi All
Content management fucntions are also available in PCUI on the attachmenst tab page.Integration with the archive link functionality.In customizing,you can define which documentation for the approriate business object is linked to the archive link fucntion.In Customizing select web application server >basis services >arachive link additionaly also you can create archive links documents from contentv management.Usage of filter profiles allows you to specify which documents are to be transferred.
For technical information on content management go to help.sap.com>sap netweaver>web appl.server>basis services/communication interfaces(BC-SRV)>Knowledge provider(BC-SRV-KPR)>Content Management service(BC-SRV-KPR)
IN GUI
Creation of personal and general visible notes at document level. IMG>CRM>Basic functions>ContentManagement>Define document templates
I hope this helps

Premiere Elements12 "Online Content Download" problem ?

Using Win7 64bit and have Adobe Creative Suite 4 Premium including Premiere Pro CS4 operating on same PC without any problems. Recently purchased from Adobe and downloaded PE12 as an upgrade from PE8. Previously Premiere Elements 8 and CS4 operated same computer without problems
On each occasion after I open PE12 and attempt to drag a audio or graphic file into the timeline, the programs stops to download an 18meg "online content download" before the audio or graphic file becomes active (after download) but only so long as the program remains open. Have tried reinstalling PE12, same problem repeats.

Daran66
You can get All the Content of a particular category using the Download All option after you right click one of the thumbnails. Then it is a matter of whether or not you want to wait for the processes to complete with the project or opened or download in background with project opened.
I have not found one button for a Download All and then wait for that to happen in the background or otherwise for All the categories including Instant Movie, Titles & Text, Audio, and Graphics. It has been one category at a time, re-starting the process to be described.
Details if necessary.....
Two prime factors in Content download and specifically the movie menus...
a. Internet speed
b. Status of Adobe Server
What particular movie menu are you trying to download? All those questions being asked, please review the following being presented just to establish a baseline and try to address your question
How do I tell PE12 to go get all of the content in one go or does it just do that in the background?
In Premiere Elements 12, under Titles & Text Tab there are the choices for that category. You select the one you want and right click the blue ban at the top right of the selected thumbnail. From the pop up, you select Download Now or Download All.
If I select Download All, I have found that All is referring just to the Content choices under Titles & Text and not all the categories that require this type of download, like Instant Movie, Titles & Text, Audio, and Graphics.
When I select Download All, I get the following....
If I click Yes, then I get
And, I select Download in background if I wish to do something else while the process completes. Can take hours depending on Internet connection and Adobe server and Content to be downloaded.
(I selected Titles & Text for this demo since I had already done the download for Tools/Movie Menu.)
You wrote
am unable to burn a DVD with any of the themes as they all seem to be stuck in some sort of "busy" grey rotating wheel state
Have you looked at closing your large project (with Tools/Movie Menu left at no menu - Reset if you have applied the one menu that comes with the program without download required)
Opening a new project and doing nothing but going to Tools/Movie Menu and doing the Content download using Download Now for the immediate need or Download All? Close out of that program...does not need to be saved. Open your large project and apply your movie menu.
Does any of that work for you?
ATR

Business Content content problem in BI 7.0

Similar Messages

Maybe you are looking for