Business Content for SRM 5.0 in SP9
Hi All,
We have BI_CONT release 702 with Level 0005. But when I try to install the transformations or any new objects like DTP, I'm not able to find many of those in Business Contents. Are these objects not yet delivered with the standard content? Do anyone have any official information on this or any OSS Note? Any planned release dates?
Also any information on existing contnts for SRM 5.0
Thanks in advance
Amit
Hi,
But i know from the documentation of SRM 5.0 --> master Guide ---> It has been mentioned as follows
1) THE SRM 5.0 CONFIGURATION DOCUMENTATION IS DELIVERED WITH THE ST-ICO 150 CONTENT SHIPMENT FOR SOLUTION MANAGER
2) SOLUTION MANAGER CONTENT REPLACES THE BUSINESS SCENARIO CONFIGURATION GUIDES , WHICH WERE DELIVERED WITH EARLIER SRM SHIPMENTS
3) THE USE OF SOLUTION MANAGER IS MANDATORY FOR MYSAP SRM 5.0
4) if you have a look at the Master guide for SRM 5.0 ---> there is one seperate section available --->
1.2 Solution Manager ---> which gives more details of the solution manager and its content.
Edited by: khan voyalpad usman on Feb 12, 2008 7:49 PM
Similar Messages
-
Business System not reflecting the XI Content for SRM
Hi,
We are currently working on the SUS-MM scenario.
The landscape includes PI 7.11, SRM 7.0 and R/3 4.6C. SLD Communication is working fine between these systems.
Integration Builder has SRM Server 7.0 and SRM Server IC 7.0 imported.
The current status:
We can successfully transfer vendors from SAP R/3 to SUS
We cannot transfer transaction data from SAP R/3 to SUS, e.g. purchase orders etc
Our Main Issue:
The Business System INTEGRATION_SERVER_<SID> is imported into the Integration Builder from the SLD.
On the Display communication component screen, the receiver and Sender tabs are not showing any of the SRM Server or IC components that have been imported into the ESR. However is displaying only the BASIS components that was imported during inital install.
Because of this, we are not able to proceed with the configuration though the interfaces being available in the ESR. We are not sure what is that we are missing that is preventing the XI content for SRM from being displayed. Also, the PI business system in the SLD has the SRM Content listed under the installed products list.
Any help would be appreciated.
Thanks
Venkat.Hello,
do you have a solution? I'm facing the same issue.
Regards,
Sven -
XI content for SRM and CCM scenario - mapping
Hi All,
We are using the standard business content for integrating SRM with CCM to update contract information from SRM to CCM. Both SRM and CCM are on the same system.
The configuration scenario used is MasterDataInclusionInCatalogOnWAS700 which is in the name space SAP CATALOG CONT.MGMT. 2.0_700 , http://sap.com/xi/CCM/CAT.
There are 2 interfaces being referred by this scenario: CatalogUpdateNotification_Out and this CatalogUpdateNotification_In and both the interfaces are pointing to the same meesage type CatalogTransmission but they are in different name spaces.
Once the scenario was configured there was no interface mapping available in the standard business content to map the above 2 interfaces.
SAP SRM SERVER 5.5
CatalogUpdateNotification_Out
CatalogTransmission
http://sap.com/xi/EBP
SAP CATALOG CONT.MGMT. 2.0_700 ,
CatalogUpdateNotification_In
CatalogTransmission
http://sap.com/xi/CCM/CAT
Is this the normal case and we need to develop our own mapping or is the standard content not imported correctly?
The service pack details are as follows:
PI 7.0 SP level 14
XI content
u2022 SAP BASIS 7.00 - SP 14
u2022 SAP CATALOG CONT.MGMT. 2.0_700 - SP 12
u2022 SAP SRM SERVER 5.5 - SP 11
u2022 SAP ABA 7.00 - SP 14
Thanks,
Shravanditto, anybody received a response from SAP with regards to this problem?
As suggested above, we could build our own mapping in XI but this would obviously be a modification to SAP standard which we would prefer to avoid.
Regards, Kyle.
OK Received a response from SAP dated Oct. 9, 2008
I assume that you have installed NW 7.00 SP14 (or higher).
Within earlier versions the mapping from XML to ABAP was to lax.
The XML message was processed witout regarding the name of the root
element. This was fixed with SP14.
When you call an interface the XML message must match with the type
defined in the WSDL used for proxy generation.
Either the message or the WSDL used to generate the proxy seems to be
wrong here.
Here is a work around should solve this problem until we make available in a standard note soon.
I will do it internally to our development team but I am sorry that i can not tell now when the note will be ready.
Disable the new check by adding the following entry in transaction sproxset
-Name: ST_USE_LAX_ON
-Value: X
-User: <empty>
-Inactive: <empty>
Edited by: Kyle Freeman on Oct 9, 2008 5:54 PM -
Hi,
We are configuring a scenario for SRM which has following landscape
ECC <=> SAP PI <=> SRM
I am trying to use XI Content for SRM 7.0 and I have imported SAP SRM 7.0 Software component into ESR. But there are no Process Integration Scenarios which I can use to configure objects in Integration Directory using wizards. Also there are no IDoc imported in this SC and no mappings defined. Does that mean We have to create our own mappings? But this was not true when we used SRM 5.0 content.
I am not able to find any document which talks how to configure PI scenario using SRM 7.0 XI Content. Do let me know if there is any?
There is another thing which comes to my mind if SRM 7.0 XI Content is using web services instead of IDoc for communication with ECC system. If that is the case then i cannot find predefined proxy in ECC system and thus i have to create custom web service server proxy (where again i have to write custom code).
Do let me know if anybody has used XI Content SRM 2007. So that I can get some help on this.
Thanks,
DivyakumarHi Divya,
We have done with SRM 5.0 but not with SRM 7.0
When i see content for SRM 7.0 in Market Place i donot find , From where did u get download those XI content for SRM 7.0 ???
Did u find any Integration Scenarios depecting the flow , we used the same for the business flow.
Please do update how u have proceeded.
Thanks
rgds
srini -
Business packages for SRM to implement EP
Hi All,
We are implementing SRM 5.5 in our company. Also, EP 7.0 we are implementing for SRM. Can anyone help me how to get the business packages for SRM and supplier collaboration, as i cant download it from sdn, as it is unrestricted shipment.
Also, how to import these business packages into EP.
Thanks in advance,
Sailesh KHiya,
Yann already pointed out where to find the BP for SRM. The Business Package for Supplier Collaboration is also available from the <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/developerareas/contentportfolio">Portal Content Portfolio</a> in the Specialist section. You want to go for the 2.0 release.
Installation:
In SAP NetWeaver 2004s, the portal is installed as a usage type via SAPINST. For installing the Business Package for SRM 5.0, the installation process also goes via SAPINST. Please follow SAP note 883948.
Best regards
Dagmar -
XI Business content for MDM - Syntax error in IDOC adapter
Hi mates,
I'm trying out the Master Data Harmonization scenario for Vendor data with R/3 as the client system. I'm using SAP delivered XI Business content for MDM. The mapping program is generating ADRMAS and CREMAS IDocs but the IDOC adapter reports that there is a syntax error in ADRMAS IDOC. Find below the details.
<i><SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_IDOC_METADATA</SAP:Code>
<SAP:P1>Segment 'E1BPAD1VL', segmentnumber '000001' not correct in structure ADRMAS02</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error: Segment 'E1BPAD1VL', segmentnumber '000001' not correct in structure ADRMAS02</SAP:Stack>
<SAP:Retry>M</SAP:Retry></i>
Generated ADRMAS IDOC is
<i> <?xml version="1.0" encoding="utf 8" ?>
<ADRMAS02>
<IDOC BEGIN="1">
<EDI_DC40 SEGMENT="1" />
<E1ADRMAS>
<OBJ_TYPE>LFA1</OBJ_TYPE>
<OBJ_ID>0000500140</OBJ_ID>
<CONTEXT>0001</CONTEXT>
<E1BPAD1VL SEGMENT="1">
<FROM_DATE>00010101</FROM_DATE>
<TO_DATE>99991231</TO_DATE>
<NAME>Swift Transportation</NAME>
<COUNTRY>US</COUNTRY>
<COUNTRYISO>US</COUNTRYISO>
<LANGU>E</LANGU>
<LANGU_ISO>EN</LANGU_ISO>
<SORT1>SWIFT TRANSPORTATION</SORT1>
<TIME_ZONE>CST</TIME_ZONE>
<E1BPAD1VL1 SEGMENT="1">
<LANGU_CR>E</LANGU_CR>
<LANGUCRISO>EN</LANGUCRISO>
<ADDR_GROUP>BP</ADDR_GROUP>
</E1BPAD1VL1>
</E1BPAD1VL>
</E1ADRMAS>
</IDOC>
</ADRMAS02></i>
Strangely, the control record is blank. I looked at the XSLT program, it is coded that way. I do not understand the reason. Is the error pointing to the control record?
Look at the code sample from XSLT mapping program
<xsl:for-each select="IDOC/*/E1ADRMAS">
<IDOC BEGIN="1">
<!-- The header data of each single ADRMAS-IDoc needs to be there but does not require specific data -->
<EDI_DC40 SEGMENT="1"/>
<xsl:apply-templates select="."/>
</IDOC>
</xsl:for-each>
How can an IDOC w/o control record be posted?
Did anyone come across this error? Whats wrong/missing?
I appreciate ur inputs.
thx in adv
praveenMoorthy,
I tried reloading the IDOC metadata from IDX2. Still I get the same error.
Regd, IDOC w/o control record, can u elaborate on "dynamic value while posting IDOCs". From where, XI message SOAP header with Business System replaced by corresponding logical system names?
Thanks
Praveen -
Error in Installing the Business Content for 2LIS_06_INV data source
Hi Experts,
We are trying to install the Business content for 2lis_06_inv. When we replicate the datasource, we are not seeing it in 3.x version. It is only vailable in 7 version. There is no transformation available in Business content for this data source. Please let me know how we need to proceed with this installation. Should we install the 7.0 flow or 3.x flow? Please provide th details if you have implemented th same in your system. Thanks is advance.
Regards,
Kavitha JagannathHi,
Follow bellow steps:
1. Goto RSA1.
2. Select the BI content.
3. Select the Grouping as' In Dataflow before and after'
Then,you can get the data flow which are haveing the DS/TR/Data targets.
4. Select the Install by setting the 'Install in background'.
Regards. -
Installing business content for 0MKT_DSO1/0CRM_LEAD_H
Hi
I am getting an error whilst installing the business content for any DSO/Infocube.
Grouping
In data flow before.
Error : Rule (target: 0GN_PAR_LSY, group: 01 Standard Group): Syntax error in routine
where as same DSO whilst acitivated wiht diff source system has no errors.
Old source system 199 - No error whilst acitvation business content - (SANDBOX)
New source system 200- error whilst acitvation business content - (DEV)
If Grouping
Only necessary objects are selected above error is not there.
But when after new transfer rules have been created and when infopackage is run, i get another error
error : DataSource 0CRM_LEAD_H is not defined in the source system
Now no data loads for new source system.Hi hungryRaj:
On your source system use Tcode RSA6 to verify if DataSource 0CRM_LEAD_H is active, if not activate it using Tcode RSA5.
Regards,
Francisco Milán.
Edited by: Francisco Milan on Aug 2, 2010 10:00 AM -
Where to download MDM Business Content for PI 7.0/7.1?
Hi Everyone!
I kindly ask for your help on my problem: I am not able to find the MDM Business Content for PI 7.0/7.1 anywhere. I searched in the Service Marketplace for a long time, but without any results... https://websmp109.sap-ag.de/installMDM seemed to be a good place for it, as well as in "Software Distribution Center" -> "Support Packages and Patches" -> "SAP Content" -> "ESR Content (XI Content)", but neither supply the adequate file
Can anyone help me? Thank you very much!
Best regards
BenediktChristian, thank you very much!
Call me blind, but I still can't find it.
After Navigating to Support Packages and Patches --> SAP NetWeaver as suggested, I just have the following options:
SAP NETWEAVER
ADAPTIVE COMPUTING CONTROLLER
SAP NW IDENTITY MANAGEMENT
ACCEL. AD FOR SAP NETWEAVER
Technology components releases prior to SAP NetWeaver
When I follow to the first option (SAP NETWEAVER) I just have the options for various releases of SAP NetWeaver, but no MDM in one of them
Do you have another hint? -
BI 7.0 Business Content for EH&S
Hello,
I've only found "healthcare" business content but it's more related to hospital management.
Does anybody know if there are bi 7.0 business content for Labor Health in companies which aren´t hospitals or health centers.
Thank you very much
Best regards
IRBHello again,
I've found Industrial Hygiene and Safety content:
Hazardous Substance Inventory
Accidents: Persons Involved
Accidents: Safety Measures
Accidents: Complete View
But it seems there's nothing about procedures and medical tests made to employees of a company (other than a hospital)...
Thanks
Regards,
Irb -
Business Content for Industry Solution Aerospace and Defence (A & D)
Hi,
We would like to implement BI for one of the organization where ERP SAP R/3 IS Aerospace and Defence (A & D) is already implemented. I tried to see business content for A & D, but could not find. Could anybody advise me where anything is available for A & D?
Thanks and Best regards
RajendraAll business content is available in the helpfile (help.sap.com). For your IS however, the link in the helpfile seems to be dead.
This either means there's an error in the online helpfile, or there's simple no business content available...
Try contacting SAP to verify? -
Problem in installation of Business Content for Solution Manager
Hi all,
I have a problem while trying to install the Business Content for Solution Manager. In detail, I cannot install/ see the Process chains. I am not much familiar with Business content installation, so maybe I missed and /or some step.
Following the instructions from SAP IMG (SPRO/ SAP IMG / Solution Manager / Configuration / Scenario-specific settings / Solution monitoring / BI Reporting / BI Client) , I activated the Datasource 0SM_SMG_ROOT , performed all the steps and installed all the relevant Business Objects (Infoobjects, Datasources, Infocubes, Infopackages, etc.). All the objects seen from transaction RSA1 seem correctly installed and activated.
The last step is the installation/activation of the Process chains. This step is executed, but the installation job terminates with messages like Infopackage 0SM_XXXX does not exist in D version; activation not possible. It seems like Process chains are looking for some Infopackage, and these are not present. They are not present indeed, and I dont know why. The result is that no Process chain is visible from transaction RSPC.
Am I missing some step, or doing a wrong/ incomplete procedure ?
Thanks a lotHI Saravanan,
For Solman Service Desk, the following objects are used :
Cube : 0CSRV_C01
DSO : 0CRM_PROH
DataSource : 0CRM_SRV_PROCESS_H
And apart from this there are some MD datasources, for BPARTNER, USER STATUS, CATEGORY etc.
Regards
Mahesh Kumar -
Hello,
I would like to understand Concept of BI content for SRM.
For some reason we cannot use BI.
【structure of the system】
BI7.0
SRM5.0(Decoupled Scenario)
ECC6.0
■transaction data(Decoupled Scenario)
How does BI eliminate crossover of documents and gather documents?
by document number?product category?
■master data(Decoupled Scenario)
WHen we use master data for analysis, should I use master date of SRM?
In that case, should we copy the master data of ECC to SRM?
【Decoupled Scenario】
Master date and transaction date (by unit of record) exist in
1. ECC
2. SRM
3. ECC and SRMNO migration of data from old to new model data.
I implemented the new model and reload the data into BW. -
Where to download the standard content for SRM to import to PI 7.4
Hi experts:
i am implementing the MM-SUS by PI. My SRM is 7.03 and PI is 7.04.
i have not implement this before. When i configure the PI Integration repository ,it need to import the Standrad Content for SRM.
My question is where i can find the standard content to download, can anyone help me with more detail? thanks a lot!user8683895 wrote:
Where to download the latest driver for X4447A-z?
Sun 4-port network card Interface:PCI-E x 8Are you restricting your search to "X4447A-z" ?
What happens when you search MOS for "X4447A"
or for "Sun 4-port network card Interface: PCI-Ex8" ? -
Business Content for SAP BW ,WAM work order ans asset management
Hi All,
where can i see the business content for sap work order and asset management. can i see it in help.sap.com
i tried but could not get . any url would be appreciated.
Regards
SriniThanks AHP for pointing out.
From BW help link as below
http://help.sap.com/saphelp_bw33/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
go to BI Content > Financials > Financial Accounting > Asset Asset Accounting
for Assets
go to BI Content > Financials > Controlling > Overhead Cost Controlling > Overhead orders
for Internal Orders
Hope this time it is fine.
Cheers
Anurag
Maybe you are looking for
-
ITunes application reopens after I quit
I don't know if anybody else has had this problem but when I close my iTunes application, suddenly a few minutes later or so it reopens out of no where. It's becoming a real annoyance as of late. I am running the latest iTunes along with the latest M
-
Hi Friends.. I have developed one workflow for po using standard workflow 20000075. its working fine.But now i copied that workflow but its not working.. if iam creating po the link in pftc automatically come into deactive status. so anyone suggest w
-
How to pull out a storage usage report for exadata platform
Hi anyone knows how to get a report of storage usage in an exadata using ZFS?... without the use of OEM
-
Ever used the Table API (TAPI) with object type in the DB?
Hi all, We are trying to generate the table API of a table that has a column defined by an object type. It works without problems if that column always has a value (is instantiated in object term). The problem is when we update a row where the column
-
Unable to update to Mavericks, app store shows error downloading, and tells me to check purchased items. I go there, but I still can't download it.