Business content for standard component is missing in BW
In a new BW implementation project what I have done is
1) activate all datasource in R/3
2) Replicate datasource in BW
3) Activate infoobject in business content.
The problem is, when I go to Business content >InfoObject by Application component> All I see is node OBWTCT ( Technical Content ). Why I Don't see the standard component ex FI SD COPA etc ? Is there a step missing ?
Hi,
Maybe you did not activate the infoareas/infocatalogs.
Try this:
-Tx(RSD1)
-Find any of the infoobject that you activate and check where is present the infoobject.
Regards
Assigns point if useful
Similar Messages
-
What is the standard business content for BCS on bw3.5?
Hi all,
Can anyone let me know the standard business content for Bcs on bw 3.5?
Thanks
PoojaYou can find this in the delivered business content under SEM > Business Consolidation System (BCS).
-
Material master Standared Business Contents for MDM 7.1 sp 06
Gurus,
I am not able to find standared business contents for material repository on service market place. can some one guide me with exact steps and location I can get it from.
I am missing some step.
TIA
deepHi Deepak,
Please follow the below link to get MDM Business Content, this zip folder contains every Master including Material:
https://websmp106.sap-ag.de/support --> click on "Software Downloads" > Click on "Support Packages and Pataches" Under SAP Software Download Center>Browse our Download Catalog>Click on SAP NetWeaver and complementary products>SAP MDM >SAP NETWEAVER MDM 7.1>Entry by Component>Business Content>MDM BUSINESS CONTENT 7.1 and then finally--># OS independent (MDMBC71006_9-20004544.ZIP - MDM 7.1 SP06 Patch9 - Business Content )
Note: For above, you need SAP User ID access to SAP Service Market Place.
Other relevant links:
1. [Note 1355137 - MDM Material Content Information (Release 7.1+)
2. http://wiki.sdn.sap.com/wiki/display/SAPMDM/SAPBusinessContent#SAPBusinessContent-HowcanIusethepredefinedMDMContent%3F
Kindly revert if you are looking for something else otherwise mark thread as answered.
Regards,
Mandeep Saini -
XI Business content for MDM - Syntax error in IDOC adapter
Hi mates,
I'm trying out the Master Data Harmonization scenario for Vendor data with R/3 as the client system. I'm using SAP delivered XI Business content for MDM. The mapping program is generating ADRMAS and CREMAS IDocs but the IDOC adapter reports that there is a syntax error in ADRMAS IDOC. Find below the details.
<i><SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_IDOC_METADATA</SAP:Code>
<SAP:P1>Segment 'E1BPAD1VL', segmentnumber '000001' not correct in structure ADRMAS02</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error: Segment 'E1BPAD1VL', segmentnumber '000001' not correct in structure ADRMAS02</SAP:Stack>
<SAP:Retry>M</SAP:Retry></i>
Generated ADRMAS IDOC is
<i> <?xml version="1.0" encoding="utf 8" ?>
<ADRMAS02>
<IDOC BEGIN="1">
<EDI_DC40 SEGMENT="1" />
<E1ADRMAS>
<OBJ_TYPE>LFA1</OBJ_TYPE>
<OBJ_ID>0000500140</OBJ_ID>
<CONTEXT>0001</CONTEXT>
<E1BPAD1VL SEGMENT="1">
<FROM_DATE>00010101</FROM_DATE>
<TO_DATE>99991231</TO_DATE>
<NAME>Swift Transportation</NAME>
<COUNTRY>US</COUNTRY>
<COUNTRYISO>US</COUNTRYISO>
<LANGU>E</LANGU>
<LANGU_ISO>EN</LANGU_ISO>
<SORT1>SWIFT TRANSPORTATION</SORT1>
<TIME_ZONE>CST</TIME_ZONE>
<E1BPAD1VL1 SEGMENT="1">
<LANGU_CR>E</LANGU_CR>
<LANGUCRISO>EN</LANGUCRISO>
<ADDR_GROUP>BP</ADDR_GROUP>
</E1BPAD1VL1>
</E1BPAD1VL>
</E1ADRMAS>
</IDOC>
</ADRMAS02></i>
Strangely, the control record is blank. I looked at the XSLT program, it is coded that way. I do not understand the reason. Is the error pointing to the control record?
Look at the code sample from XSLT mapping program
<xsl:for-each select="IDOC/*/E1ADRMAS">
<IDOC BEGIN="1">
<!-- The header data of each single ADRMAS-IDoc needs to be there but does not require specific data -->
<EDI_DC40 SEGMENT="1"/>
<xsl:apply-templates select="."/>
</IDOC>
</xsl:for-each>
How can an IDOC w/o control record be posted?
Did anyone come across this error? Whats wrong/missing?
I appreciate ur inputs.
thx in adv
praveenMoorthy,
I tried reloading the IDOC metadata from IDX2. Still I get the same error.
Regd, IDOC w/o control record, can u elaborate on "dynamic value while posting IDOCs". From where, XI message SOAP header with Business System replaced by corresponding logical system names?
Thanks
Praveen -
Installing business content for 0MKT_DSO1/0CRM_LEAD_H
Hi
I am getting an error whilst installing the business content for any DSO/Infocube.
Grouping
In data flow before.
Error : Rule (target: 0GN_PAR_LSY, group: 01 Standard Group): Syntax error in routine
where as same DSO whilst acitivated wiht diff source system has no errors.
Old source system 199 - No error whilst acitvation business content - (SANDBOX)
New source system 200- error whilst acitvation business content - (DEV)
If Grouping
Only necessary objects are selected above error is not there.
But when after new transfer rules have been created and when infopackage is run, i get another error
error : DataSource 0CRM_LEAD_H is not defined in the source system
Now no data loads for new source system.Hi hungryRaj:
On your source system use Tcode RSA6 to verify if DataSource 0CRM_LEAD_H is active, if not activate it using Tcode RSA5.
Regards,
Francisco Milán.
Edited by: Francisco Milan on Aug 2, 2010 10:00 AM -
Problem in installation of Business Content for Solution Manager
Hi all,
I have a problem while trying to install the Business Content for Solution Manager. In detail, I cannot install/ see the Process chains. I am not much familiar with Business content installation, so maybe I missed and /or some step.
Following the instructions from SAP IMG (SPRO/ SAP IMG / Solution Manager / Configuration / Scenario-specific settings / Solution monitoring / BI Reporting / BI Client) , I activated the Datasource 0SM_SMG_ROOT , performed all the steps and installed all the relevant Business Objects (Infoobjects, Datasources, Infocubes, Infopackages, etc.). All the objects seen from transaction RSA1 seem correctly installed and activated.
The last step is the installation/activation of the Process chains. This step is executed, but the installation job terminates with messages like Infopackage 0SM_XXXX does not exist in D version; activation not possible. It seems like Process chains are looking for some Infopackage, and these are not present. They are not present indeed, and I dont know why. The result is that no Process chain is visible from transaction RSPC.
Am I missing some step, or doing a wrong/ incomplete procedure ?
Thanks a lotHI Saravanan,
For Solman Service Desk, the following objects are used :
Cube : 0CSRV_C01
DSO : 0CRM_PROH
DataSource : 0CRM_SRV_PROCESS_H
And apart from this there are some MD datasources, for BPARTNER, USER STATUS, CATEGORY etc.
Regards
Mahesh Kumar -
Change Mail content for standard mail 'Simultaneous logon approval required' in 2 Envelop RFx
Hi Experts,
Please suggest, we have a requirement where we need to Change Mail content for standard mail 'Simultaneous logon approval required' and Simultaneous Logon Successful in 2 Envelop RFx in SRM.
Thanks.
Regards,
GauravHi Gaurav,
please implement BADI /SAPPSSRM/BD_SIM_LOGIN
Enhance Simultaneous Logon
Use
You can use this Business Add-In (BAdI) to incorporate customer-specific functions into the initiation and completion processes for simultaneous logon and to adapt simultaneous logon e-mail notifications.
Method PROCESS_FINISH
You use this method to add customer-specific functions to the simultaneous logon process. This method is called on completion of the simultaneous logon process.
The following parameters are provided
IV_EXT_GUID
Process ID of the external process
IV_MODE
Indicates the mode of the e-mail function (completion)
CV_SUCCESS
Indicates whether the process was successful
IV_SET_GUID
Process ID of the customer-specific process
Method PROCESS_INIT
You use this method to add customer-specific functions to the simultaneous logon process. This method is called on initiation of the simultaneous logon process.
The following parameters are provided:
IV_EXT_GUID
Process ID of the external process
IV_MODE
Indicates the mode of the e-mail function (initiation)
IV_SET_GUID
Process ID of the customer-specific process
Method SIM_EXT_MAIL
You use this method to change the content of the e-mail sent to participants on successful initiation, completion or failure of the simultaneous logon session and to define the external process that is calling the simultaneous logon application.
The following parameters are provided:
IV_OBJECT_ID
Business object identifier
IV_MODE
Indicates the mode of the e-mail function (initiation, completion or failure)
IV_EXT_MODE
Indicates the external process, for example, technical RFx response opening, of the calling application. This could be any process for which you want to use simultaneous logon.
CT_MAIL_BODY
Content of the e-mail
CV_MAIL_SUB
Subject line of the e-mail
Standard settings
If the customer does not define a BAdI implementation, SAP delivers a default BAdI implementation. The default implementation incorporates the simultaneous logon process with the two-envelope RFx response process. You cannot use the simultaneous logon process with standard RFxs in the default implementation.
Activities
Information about the implementation of BAdIs in the context of the enhancement concept is available in the SAP Library for SAP NetWeaver under BAdIs - Embedding in the Enhancement Framework.
Regards,
raghuveer -
Business content for Investment Management & Travel management
Hi All,
I am trying to install Business content for Investment Management & Travel management, I found the content in 3.x flow with Infosource. once I raised with SAP they also reply with 3.5 flow. I am doubt full to build with 3.5 flow because 3.5 flow SAP support date over on 31.03.2013. SO how they will support. Please put some light if some one have any idea.
Cheers
AnilHello Anil,
this community deals with the SAP product 'SAP Landscape Transformation'. Can you pls. indicate in which SAP component you have the issue? I guess that the current community might not be the right one.
Best, Heike -
Is there any business conent object for FI-SL in BI side ( I mean cube, DSO, or queries, etc) ?
We are going to implement FI-SL. The only thing I can find is that I have to generate the data source by myself. I don't find anything at BI side. Is there any sample queries, cubes ?Hi ,
FI-SL DataSources cannot be delivered by SAP with BW Business Content for non-standard ledgers,
because the ledgers and their FI-SL totals tables may link to user-defined fields and structures.
All other FI DataSources (FI-GL, FI-AR, FI-AP) are delivered with Business Content.
To provide an FI special ledger DataSource for BW, an extract structure (=transfer structure) must be
generated for the FI-SL totals table in question. You then have to define the DataSource for the totals
table ledger.
Check this link:
http://help.sap.com/saphelp_bw32/helpdata/en/c9/fe943b2bcbd11ee10000000a114084/frameset.htm
Hope it helps,
Regards,
Supriya -
Error in Installing the Business Content for 2LIS_06_INV data source
Hi Experts,
We are trying to install the Business content for 2lis_06_inv. When we replicate the datasource, we are not seeing it in 3.x version. It is only vailable in 7 version. There is no transformation available in Business content for this data source. Please let me know how we need to proceed with this installation. Should we install the 7.0 flow or 3.x flow? Please provide th details if you have implemented th same in your system. Thanks is advance.
Regards,
Kavitha JagannathHi,
Follow bellow steps:
1. Goto RSA1.
2. Select the BI content.
3. Select the Grouping as' In Dataflow before and after'
Then,you can get the data flow which are haveing the DS/TR/Data targets.
4. Select the Install by setting the 'Install in background'.
Regards. -
Where to download MDM Business Content for PI 7.0/7.1?
Hi Everyone!
I kindly ask for your help on my problem: I am not able to find the MDM Business Content for PI 7.0/7.1 anywhere. I searched in the Service Marketplace for a long time, but without any results... https://websmp109.sap-ag.de/installMDM seemed to be a good place for it, as well as in "Software Distribution Center" -> "Support Packages and Patches" -> "SAP Content" -> "ESR Content (XI Content)", but neither supply the adequate file
Can anyone help me? Thank you very much!
Best regards
BenediktChristian, thank you very much!
Call me blind, but I still can't find it.
After Navigating to Support Packages and Patches --> SAP NetWeaver as suggested, I just have the following options:
SAP NETWEAVER
ADAPTIVE COMPUTING CONTROLLER
SAP NW IDENTITY MANAGEMENT
ACCEL. AD FOR SAP NETWEAVER
Technology components releases prior to SAP NetWeaver
When I follow to the first option (SAP NETWEAVER) I just have the options for various releases of SAP NetWeaver, but no MDM in one of them
Do you have another hint? -
BI 7.0 Business Content for EH&S
Hello,
I've only found "healthcare" business content but it's more related to hospital management.
Does anybody know if there are bi 7.0 business content for Labor Health in companies which aren´t hospitals or health centers.
Thank you very much
Best regards
IRBHello again,
I've found Industrial Hygiene and Safety content:
Hazardous Substance Inventory
Accidents: Persons Involved
Accidents: Safety Measures
Accidents: Complete View
But it seems there's nothing about procedures and medical tests made to employees of a company (other than a hospital)...
Thanks
Regards,
Irb -
Business Content for Industry Solution Aerospace and Defence (A & D)
Hi,
We would like to implement BI for one of the organization where ERP SAP R/3 IS Aerospace and Defence (A & D) is already implemented. I tried to see business content for A & D, but could not find. Could anybody advise me where anything is available for A & D?
Thanks and Best regards
RajendraAll business content is available in the helpfile (help.sap.com). For your IS however, the link in the helpfile seems to be dead.
This either means there's an error in the online helpfile, or there's simple no business content available...
Try contacting SAP to verify? -
Business Content for SAP BW ,WAM work order ans asset management
Hi All,
where can i see the business content for sap work order and asset management. can i see it in help.sap.com
i tried but could not get . any url would be appreciated.
Regards
SriniThanks AHP for pointing out.
From BW help link as below
http://help.sap.com/saphelp_bw33/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
go to BI Content > Financials > Financial Accounting > Asset Asset Accounting
for Assets
go to BI Content > Financials > Controlling > Overhead Cost Controlling > Overhead orders
for Internal Orders
Hope this time it is fine.
Cheers
Anurag -
Business Content for Product Cost Collector analysis - KKBC_PKO
Hello,
I have a user requirement to setup a report that matches the KKBC_PKO report in ECC.
Is there any business content that can help me do that?
Many thanks,
ClaudioHi,
I guess you shoud check out one of the 0CO_PC_* datasources. Check also the business content for applicaten controlling->product cost controlling. [BCT|http://help.sap.com/saphelp_nw70/helpdata/en/37/dc143c65b8b800e10000000a114084/frameset.htm]
Siggi
Edited by: Siegfried Szameitat on Jul 14, 2010 2:47 PM
Maybe you are looking for
-
Set value with XPath dynamically
Dear All, I am wonder if the following is possiable with Set Value service using XPath, any *simple* workaround is also welcome too. If I have a variable myXML = <root> <item region="One">1</item> <item region="Two">2</item> </root> I can reference t
-
HI, when its recommended to use Inheritance and when not? Regards
-
Hello everybody, some time ago I bought the book by Horstmann and Cornell "Core JAVA 2, Volume I - Fundamentals". Now I decided to start reading it but I don't know what I did with the attached CD. If you have the same book could you kindly send me t
-
After upgrading to APEX 4.1 the database management GUI has been removed
I've succesfully upgrated to APEX 4.1 on my database 10gXE The only problem is that now the database management GUI (Usage Monitor section) has been removed from APEX and I'd like to keep on dealing with DBA activities as before. How is it possibile?
-
I want to have two profiles share the same extensions and themes.
I have themes in Profile 1 that I want Profile 2 to have and I have themes in Profile 2 that I want Profile 1 to have. Also, I want both Profile 1 and Profile 2 to have each others extensions, however I don't want them to be global for all profiles.