Business content in ECC6.0

Hi all,
I am working on ECC 6.0. As it also contains BI , i am trying to access the Business content.I tried to activate business content from RSA1 and i couldn't able to see all the business content which normally available in bi 7.0. Could you please suggest how to access the all the business content in ECC 6.0.

Hi Arun,
I am working on ECC 6.0 IDES version and BW Highest support package  is SAPKW70005.
Please suggest how to access SAP Demo Infocubes.

Similar Messages

  • Missing Info Objects and Business Content in IDES ECC6 with BI7.0

    Hi All,
    I do not see most of info objects like 0COMP_CODE, 0BUS_AREA, 0RESP_PERS etc. and lot of objects missing in Business Content too.
    I have IDES ECC6 with BI7.0.
    Could someone please help me to retrieve those objects.
    Thanks.

    Hi Kishore,
    Thanks for the info. I am little confused. I thought i had full BW in my ECC6. What is the difference between ECC6.0 with BW and ECC6.0 with BW/BI7.0? BI7.0 has all business contents in it?
    The IDES software has BW/BI 7.0 in it. That is what the person whi gave me told me. How can i verify that?
    I have some knowledge of BW and i am trying to learn this new BW 7.0 on my own. Since it does not have BI content how can i proceed to learn on my own.
    Please help. Thanks.

  • Missing datasources when installing Business Content

    Hi All
    We have a requirement for a number of SBC infoproviders (BI7/ECC6) which are new to us.
    The majority we have installed successfully but we are having problems with 0SLL_C01 / C02 and C03 which relate to Customs and 0BVTSD02 which is a Telephones Sales Acitivity DSO from the Beverage Industries area.
    We have 'successfully' installed all the data flows down to the infosource level but none of the datasources were installed.
    On re-checking in our source system RSA5/RSA6 we realised there were no datasources available for these infosources.
    How do you add business content datasources to your source system so they are available? or have we missed a process?
    Thanks
    Jerry

    Hi Jerry,
    The Datasource you are talking about is related to release of SAP GTS 3.0  pack.
    So please check with you basis team whether they have installed this plug-in in your source system.
    If these release /plug-in are not installed in your sourcce system you wont be able to finf it in the RSA5/RSA6.
    Thanks and Regards
    Arun

  • Errors activating HR Business Content: cube 0PA_C01, ODS 0PA_DS02, 0PA_DS02

    Hello!!
    we are installing a IDES BW system for customer demos, training and so on.
    I am tying to activate all HR Business Content, and I began activating Personnel Administration.
    Every time that I am trying to activate HR Business Contentt objects, the following error message appears:
    Err.tmpo.ejec.         CALL_FUNCTION_CONFLICT_LENG
    Excep.                   CX_SY_DYN_CALL_ILLEGAL_TYPE
    Error in the ABAP Application Program
    The current ABAP program "SAPLRSAOS" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
    A function module was called incorrectly.
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_TYPE', was
    not caught in
    procedure "OSOA_UPLOAD" "(FORM)", nor was it propagated by a RAISING clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    The call to the function module "RSA1_OLTPSOURCE_GET_ALL" is incorrect:
    In the function module interface, you can specify only
    fields of a specific type and length under "I_T_OLTPSOURCE".
    Although the currently specified field
    " " is the correct type, its length is incorrect.
    We have installed the following components:
    SAP Netweaver 2004s:
    SAP_ABA     700                     0015     SAPKA70015     Componente multiaplicaciones
    SAP_BASIS     700     0015     SAPKB70015     Sistema Base SAP
    PI_BASIS     2005_1_700     0015     SAPKIPYJ7F     PI_BASIS 2005_1_700
    SAP_BW     700                     0017     SAPKW70017     SAP NetWeaver BI 7.0
    BI_CONT     703                     0008     SAPKIBIIP8     Business Intelligence Content
    SAP ECC6.0:
    SAP_ABA     700                     0015     SAPKA70015     Componente multiaplicaciones
    SAP_BASIS     700     0015     SAPKB70015     Sistema Base SAP
    ST-PI     2005_1_700     0006     SAPKITLQI6     SAP Solution Tools Plug-In
    PI_BASIS     2005_1_700     0015     SAPKIPYJ7F     PI_BASIS 2005_1_700
    SAP_BW     700                     0017     SAPKW70017     SAP NetWeaver BI 7.0
    SAP_AP     700                     0012     SAPKNA7012     SAP Application Platform
    LCAPPS     2005_700                     0006     SAPKIBHD06     LC Applications (LCAPPS) 2005_700
    SAP_APPL     600     0012     SAPKH60012     Logísitica y Finanzas
    EA-IPPE     400                     0012     SAPKGPID12     SAP iPPE
    EA-APPL     600                     0012     SAPKGPAD12     SAP R/3 Enterprise Extension PLM, SCM, Finanzas
    EA-DFPS     600                     0012     SAPKGPDD12     SAP R/3 Enterprise Extension Fuerzas de defensa y
    EA-FINSERV     600     0012     SAPKGPFD12     SAP R/3 Enterprise Extension Financial Services
    EA-GLTRADE     600     0012     SAPKGPGD12     SAP R/3 Enterprise Extension Global Trade
    EA-HR     600                     0028     SAPKGPHD28     SAP R/3 Enterprise Extension HR
    EA-PS     600                     0012     SAPKGPPD12     SAP R/3 Enterprise Extension Administración pública
    EA-RETAIL     600     0012     SAPKGPRD12     SAP R/3 Enterprise Extension Retail
    FINBASIS     600                     0012     SAPK-60012INFINBASIS     Fin. Basis
    FI-CAX     600                     0012     SAPK-60012INFICAX     FI-CA Extended
    INSURANCE     600     0012     SAPK-60012ININSURANC     SAP Insurance
    IS-CWM     600                     0012     SAPK-60012INISCWM     Industry Solution Catch Weight Management
    IS-H     600                     0013     SAPK-60013INISH     SAP Healthcare
    IS-M     600                     0012     SAPK-60012INISM     SAP MEDIA
    IS-OIL     600                     0011     SAPK-60011INISOIL     IS-OIL
    IS-PS-CA     600                     0012     SAPK-60012INISPSCA     IS-PUBLIC SECTOR CONTRACT ACCOUNTING
    IS-UT     600                     0012     SAPK-60012INISUT     SAP Utilities/Telecommunication
    LSOFE     600                     0012     SAPK-60012INLSOFE     SAP Learning Solution Front-End
    SEM-BW     600                     0012     SAPKGS6012     SEM-BW: Strategic Enterprise Management
    SLL-LEG     7.00                     0006     SAPK-70006INSAPSLL     SLL-LEG 700 : Add-On Supplement
    WFMCORE     200     0012     SAPK-20012INWFMCORE     WFMCORE 200 Upgrade: Meta-Commandfile (D
    CPRXRPM     400                     0012     SAPK-40012INCPRXRPM     SAP xRPM/cProjects/cFolders 4.00 (ABAP)
    ECC-DIMP     600                     0012     SAPK-60012INECCDIMP     DIMP
    ERECRUIT     600     0012     SAPK-60012INERECRUIT     E-Recruiting
    FI-CA     600                     0012     SAPK-60012INFICA     FI-CA
    MRSS     600                     0000          -     Multi Resource Service Scheduling
    ST-A/PI     01G_ECC600     0000          -     Application Servicetools for ECC 600
    AIN     400                     0005     SAPK-40005INAIN     AIN 400 : Add-On Supplement
    XFT     210_700                     0000          -     xft business add-on
    So, can everybody help me? Do we need any component more in BW or SAP ECC? How can we solve this problem?
    Thanks in advanced for your help.
    Best regards,
    Seshen

    Hi Sam,
    Please check whether datasources are installed and active in the source system.
    For remote activation you need role SAP_RO_BCTRA or authorization object S_RO_BCTRA in your profile.
    If not active, you can activate via RSA5.
    Afterwards, install the transfer rules again.
    If you are lower than SPS8, check note 929935.
    Hope this helps,
    regards,
    Olav

  • How to Extract the Business content Master Data

    Hello,
    I activated  Master Data Business content  0NOTIFICATION_ATTR and 0NOTIFICATION_TEXT on ECC6.0. these are belongs to "Quality Management Master Data"
    How to fill the data right now it had 0 records
    Do we need to fill the setup tables?
    Thanks

    hi roshan,
    if u r loading from a flat file ,do follow thw below steps
    Uploading of master data
    Log on to your SAP
    Transaction code RSA1u2014LEAD YOU TO MODELLING
    1. Creation of Info Objects
    u2022 In left panel select info object
    u2022 Create info area
    u2022 Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
    u2022 Create new characteristics and key figures under respective catalogs according to the project requirement
    u2022 Create required info objects and Activate.
    2. Creation of Data Source
    u2022 In the left panel select data sources
    u2022 Create application component(AC)
    u2022 Right click AC and create datasource
    u2022 Specify data source name, source system, and data type ( master data attributes, text, hierarchies)
    u2022 In general tab give short, medium, and long description.
    u2022 In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
    u2022 In proposal tab load example data and verify it.
    u2022 In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
    u2022 Activate data source and read preview data under preview tab.
    u2022 Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
    3. Creation of data targets
    u2022 In left panel select info provider
    u2022 Select created info area and right click to select Insert Characteristics as info provider
    u2022 Select required info object ( Ex : Employee ID)
    u2022 Under that info object select attributes
    u2022 Right click on attributes and select create transformation.
    u2022 In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
    u2022 Activate created transformation
    u2022 Create Data transfer process (DTP) by right clicking the master data attributes
    u2022 In extraction tab specify extraction mode ( full)
    u2022 In update tab specify error handling ( request green)
    u2022 Activate DTP and in execute tab click execute button to load data in data targets.
    4. Monitor
    Right Click data targets and select manage and in contents tab select contents to view the loaded data. Alternatively monitor icon can be used.
    Regards
    Ani

  • Regarding Business Content objects

    Hi gurus,
    I have loaded Ecc6 in my LAPTOP. I can able to see AWB page in RSA1, but when I clicked on BIContent, Iam able to see only technical content, I could not find Standard Business content object(cubes,DSO's,objects..etc).Please let me know how to install those object in my system.
    Thanks,
    Naveena.

    hi,
    you have to download BI content from service market place from sap. and load
    the BI Content in data ware house workbench. then only you can able to install
    (view) business content.
    regards
    harikrishna N

  • Error while activating the business content object

    Hi guru,
    We have installed a new BI system, and hence we need to activate all the business content object as they are available in delivery version.
    So as there was an requirement i tryed to activate the business content object ,that is 0mat (MATNR) material number,
    but once done with the installation when i try to find the object and display it
    that is i select the object 0mat , context menu and say display or change it does not show the complete screen as it appears for a characterstic and gives a error
    "_settings for material number conversion not found"_*
    so please help me out what is the problem
    Thanks

    Thanks Subash Balakrishnan for replying,
    but let me inform you that i already did that as i need to install this object and now the object is showing with green instead of grey,
    Now my problem is that after selecting grouping and collection when i go to infoobject menu under modelling and find out the object 0mat, it shows in green , but as i need to observe the properties of this object like data type , length etc , i select the object 0mat and right click and select display,
    then instead of showing me the object properties screen it gives me the error as mentioned above,
    so as you say it has to be in active versoin , but i can not view the normal screen which appears after creating any object ,
    now i hope my problem is quiet explanatory so please help me.
    Thanks

  • Unable to 'set the default source system' to Install Business Content

    Hi,
    Maars here. This is my first post hoping that in future ones I'll also be lending a helping hand.
    I am trying to 'Install Business Content' under the BUSINESS CONTENT section in txn RSA1. I am doing this after 'Transfer Data Sources' in R/3 and I can now see all the data sources (under the application component hierarchy) for the source system. But I am not able to see the Info Objects in the Business Content.
    When I try to set R/3 as the default source system (got this screen after clicking a icon in the standard tool bar), BW is not saving the settings ie., I set the R/3 as the default and then click on OK. If I go back to the same screen again, I find that my settings were NOT saved.
    Could you please help me out?
    Thank you.

    Hi,
    It seems to be a bug in version 3.5.
    Do like this:
    After you open the screen to <i>choose the dafault source system</i>
    Clcik on 3rd button(F6) available in the bottom of the scrreen.
    And then select teh tick mark for required system.
    And then click on Continue button
    You have do this step before you drop the cube to right side of the cube.
    Ok, even after all these steps , if you reopen the screen you would not see Tick mark u have done just before. DONOT WORRY ABT it.
    Drag and drop required cube with dat flow before.
    Now you can see the Transfer rules with selected Source system only in the collected Objects.
    With rgds,
    Anil Kumar Sharma .P

  • How to activate the Info object catalog in Business content

    Hi,
      While trying to activate the Info object catalog, I found that some of the info objects under this catalog was earlier activated by some other developer. I brought this catalog (0SALES_CHA01) over to the Business content activation panel ( with only 'necessary object settings ) and all the info objects that also came along  were de-selected since I didn't want to install those again). When I tried to install these I get an error indicating that some of the info object in question are not already active.. and ultimately the catalog doesn’t get activated , although more than half of its infoobjects are already active under the '0CHANOTASSIGNED' node.
    Please let me know whether I can get only the Catalog activated without getting any existing activated info object merged or installing those which are not already activated.
    Thanks
    Arunava

    Hello Arunava,
    Just drag the infoobject catalog as u did earlier to the left in the bus cont installation screen with "only necessary object" option.
    Dont try to deselect any object. Go ahead with the default options and install in background.
    Now you can check for the available objects in the catalog. if you have some objects missing, and available in unassigned node,double click on the newly installed infoobject catalog, select the required objects (which are not yet assigned to this) from the left side and bring them to the right side.
    this will make the unassigned objects assigned to the required catalog.
    Hope it helps..
    (please dont forget to reward points to helpful answers)

  • Business content datasource enhancement

    Hi Experts,
    I am new to HR.
    We are implementing HR modules Personnel development and Personnel administration, while I was looking into business content extractors 0HR_PA_0 and OHR_PA_1, I found that there were only few fields in the extract structure but there were many fields in the cube.Do we need to enhance the datasources? how it works?. If anybody did the enhancement to these datasources, please give me the information with examples.
    Anita

    No, it is no necesary to enhance standard data sources. Those datasources extract, basically employee and date. Most infoobjects in cube are calculated from 0PERSON and 0EMPLOYEE attributes, having in count the date and employed extracted, because most in HR is time dependent.
    Assign point is usefull

  • Taking too much time incollecting in business content activation

    Hi all,
    I am collecting business content object for activation. I have selected 0fiAA_cha object,while cllecting in the activation but it is taking too much time and then it asks for source
    system authorisation and then throws error maximum run time exceded. i have selected data flow before there.
    What can be the reason for it.
    Please help..

    Hi ,
    You should also always try and have the latest BI content patch installed but I don't think this is the problem. It seems that there
    are alot of objects to collect. Under 'grouping' you can select the option 'only necessary objects', please check if you can
    use this option to  install the objects that you need from content.
    Best Regards,
    Des.

  • SRM Business Content

    Hi All,
    I would like to know the infosource of 0SR_C01 procurement overview(aggregated) cube. while on help.sap it shows 0SR_MC01 as a multiprovider for 0SR_C01. But could not find the infosource for the same.
    I would also like to know if anyone has the list of content infocubes and their infosources for SRM. Please share it with me.
    Thank in Advance
    Niren

    Hi ,
    for all business content, you can start here
    http://help.sap.com/saphelp_nw04s/helpdata/en/3d/5fb13cd0500255e10000000a114084/frameset.htm
    scm
    http://help.sap.com/saphelp_nw04s/helpdata/en/29/79eb3cad744026e10000000a11405a/frameset.htm
    and bi best practice
    http://help.sap.com/bp_biv335/BI_EN/html/bw.htm
    Check this link for SRM Business Content information: http://help.sap.com/saphelp_nw2004s/helpdata/en/3a/7aeb3cad744026e10000000a11405a/frameset.htm
    DataSources
    New DataSources have been created for NW 2004s BI Content Add-On 2 and SRM 5.0. These are described here, along with their extraction logic.
    The following graphic shows the data flow from the DataSources to the DataStore objects
    Structure
    Each DataSource has an extraction structure and a data extractor. Generally, this is an RFC-capable function module.
    There are two types of extraction: Specific extraction and generic extraction:
    Specific extraction is strongly oriented towards the data model of the BI System and the necessary extract structure. It executes DataSource-specific processing steps.
    The logic contained within the generic extraction is implemented centrally and can therefore be reused by the specific extraction modules. The generic extraction deals with access to the SRM database and is similar for each DataSource.
    Generic and specific extraction
    Extraction logic in detail
    Data extraction involves the following six function modules:
    InitLoad
    InitLoad is called as soon as an initial upload is started in the BI System. In other words, it is executed when data is loaded into the BI System for the first time. The module can restrict the data extraction according to filter criteria that were defined in BI during extraction (for example, extract the data for a particular timeframe). InitLoad packages the data before it is transferred to the BI System.
    DeltaLoad
    DeltaLoad is called when a document is modified in the SRM System. The module writes data that has accumulated since the initial loading to a delta queue.
    Data Collector
    The Collector reads the required data from the database in the source system. For performance reasons, the data is then buffered in system-internal tables. The tables have the same structure as in the database. This saves time and effort, because data conversion is kept to a minimum.
    Data Consolidator
    The Consolidator groups data that belongs together from a business point of view. The consolidated data is stored in internal tables and is prepared for further processing.
    Data Normalizer
    The Denormalizer prepares the source data for the BI System. It calculates key figures that are required for the report but are not contained on the database and converts data types in the source system to data types of the BI System. Depending on the BI data model, the system now decides how each row is filled with data.
    Data Mapper
    During mapping of the data, the system defines which fields of the denormalized data structure are assigned to the fields of the extract structure. In this way, flat and one-dimensional lines are generated from the data.
    The following table shows the technical names of the function modules of the individual DataSources:
    Description
    0SRM_TD_PO
    0SRM_TD_CF
    0SRM_TD_IV
    0SRM_TD_PO_ACC
    InitLoad
    BBP_BI_PO_EXTRACT
    BBP_BI_CF_EXTRACT
    BBP_BI_IV_EXTRACT
    BBP_BI_PO_ACC_EXTRACT
    Collector
    BBP_BI_GEX_COLLECT
    BBP_BI_GEX_COLLECT
    BBP_BI_GEX_COLLECT
    BBP_BI_GEX_COLLECT
    Consolidator
    BBP_BI_GEX_CONSOLIDATE
    BBP_BI_GEX_CONSOLIDATE
    BBP_BI_GEX_CONSOLIDATE
    BBP_BI_GEX_CONSOLIDATE
    Denormalizer
    BBP_BI_GEX_DENORMALIZE
    BBP_BI_GEX_DENORMALIZE
    BBP_BI_GEX_DENORMALIZE
    BBP_BI_GEX_DENORMALIZE
    Mapper
    BBP_BI_PO_MAP
    BBP_BI_CF_MAP
    BBP_BI_IV_MAP
    BBP_BI_PO_ACC_MAP
    DeltaLoad
    BBP_BI_DELTA_UPDATE
    BBP_BI_DELTA_UPDATE
    BBP_BI_DELTA_UPDATE
    BBP_BI_DELTA_UPDATE
    Hope this helps,
    Regards
    CSM Reddy

  • Finding fields in R/3 for data extraction VS Business content

    Hi all,
    I am doing my first BW project after my training and I am finding it difficult to locate some fields that should be part of my report.
    The Consultant says Sales Group, Inco terms, Open orders, Account assignment group, Sold to party, ship to party, Payment terms, Document currency and base currency, Complete deliver indicator, Order type and Count of Complete deliveries required should all be in the Order while transmission type and number of transmissions should be in NAST.
    I have gone to R/3 - RSA6 to look at datasources and found 2LIS_01_S260 (Sales order) to have most of the fields but not payment terms, complete delivery indicator, open orders base currency and count of complete deliveries required. Also in Sales document header data, these fileds are not there.
    Is it a case of not understanding the correct name of the fields if they are described in a different manner in R/3 or I have not done the proper thing? Can I just use an infocube in BW business content to get all the required objetcs -(infocube, infosource, datasource).
    Thank you

    Hi,
    Finding the correct Infoobject and it's mapped field is a job of BIW consultant. But the problem is how to find them and how to frind respective R/3  field and it's table. You will be familar with them as your experience increases.
    So you need to list of fields you require and then find out the Datasource/s which can give these fields by going through the Business content help or using LBWE Tcode in R/3.
    The datasource you mentioned is obsolate one. i.e 2LIS_01_S260  .
    You better to go wtih new DSes like 2LIS_11_VAITM,2LIS_11_V_ITM.
    http://help.sap.com/saphelp_bw31/helpdata/en/8f/36f338472b420de10000000a114084/frameset.htm
    If allmost all fields are avialable in a DS , then you can check the possibility of enhancing the DS for remaining Fields.
    With rgds,
    Anil Kumar Sharma .P

  • Business Content for Bill Up transaction in CRM system

    To all Experts,
    I'm currently working on a project that requires Bill Up transactional data ( Source Table: CMSD_BU ) to flow from CRM to BW system. I'm looking for Business Content that can fulfill this requirement. However, till to date, I couldn't find any information of such Business Content. I'm not sure if such BC exist. Can anyone help if you have experience implement this data flow?
    When searching for the DataSource / Extractor, I found BW Extract Structure CMST_BU_BW and CMST_BU_BW_C in the CRM system. But couldn't find any DataSource for both extract structure. Not sure if we need to install any support pack in order make the BC available in the system. Please help if you have any idea. 
    Thanks in advance.
    Regards,
    Hui Pin

    Hi Shalini,
    The document is replicated from ECC to CRM without any errors.
    For this document I just want to create follow up transaction in CRM.(I dont want to change the document in CRM)
    The follow up transaction is in display mode. this is my problem.
    Hi Rekha:
    I have done following setting in CRM to create follow up transaction in CRM for the document which is replicated from ECC to CRM.
    1)     Defined the Copying Control for Transaction type
    2)     Defined Copying Control for Item categories
    3)     Defined Item category determination when copying
    Thanks in advance,
    Regards,
    -Rahul.

  • How to open document from business content in weby dynpro ?

    Hello experts,
    I've cretaed a webdynpro where I want to display a document which is attached
    to a product in tx commpr01 in business content.
    I've tested method o_cl_crm_documents->get_with_url , but
    there I do not get a url in webdynpro.
    Does anybody know another method/fm to display such a document from
    business content in webdynpro ?
    Thanks and best regards
    Gerd

    Hello Mr. Jung,
    I'm sorry but I didn't find this method linktourl.
    In my web-dynpro I'm getting the url for my document after
    cklicking on the selected row.
    Then I just want to give this paramter to this linktourl method
    and open the document.
    How can I implement this method ? which class ?
    Thanks Gerd

Maybe you are looking for