Business content installation problem

Hello
When I am trying to install SD cubes through with Business content with the setting of data flow before and after , I am getting the Transfer rules .....basically I am looking for data flow in BI7 , like Transformation and DTP ? , how I will be able to install whole dataflow in BI7 method .
I am in BI7.
Regards,

Hi Akshay,
In BI7 we don't have standard Transformation(BC) so we have to install transfer rules and update rules then try to migrate 3.x to 7.0 data source after that you can create transformation manually,
Its better to install BC with grouping only necessary object coz when you select grouping after or before it will search whether you have authorization to activate ds in source system r not then if you don't have authorization you may get errors.
Then migrate the 3.x data source to bi7 data source by using rsds tcode.
Refer sapnote_0001052648 for migration
Regards
Vivek

Similar Messages

Different Problems during Business Content Installation in BI 7.0

HI GURUs,
          I'm working on BI 7.0. Here I'm trying to do business content installation and facing the following problems.
Question 1:
          Let's say when I'm trying to install 0MATERIAL infoobject
Scenario 1:
( with Necessary Objects as Grouping), the job is finishing succesfully, but when I look for 0MATERIAL in Infoobjects of Modelling it is found in Unassigned characteristics Node where as it should have been in 0MMIC_CHA01 Catalog & secondly it's not in Active state. When I tried to manually activate it I'm getting the error stated in Fig 1b of attachment.
When I tried for Object Maintanance of 0MATERIAL in Business Content Screen i'm getting the same error (Fig 1a & 1b).
Scenario 2:
(_with Dataflow before and afterwards as Grouping_). In this scenario i'm getting the issue shown in fig 2. I would like to understand why this issue is popping up, specially the source system issue.
Note: The Figures are found in the file attached with this link.........
           [Bi Content INstallation Error Doc|http://rapidshare.com/files/269891244/BI_Content_Installation_Errors.doc.html]
Question 2:
         Why are many of the infoobjects like 0Customer, 0Material etc getting assigned to Unassigned Characteristics instead of getting assigned to their respective Characteristic catalogs.
Note: It would be much more helpful if the solution is provided with reference to SAP Note, though alternate solution is always welcome.
       Hoping for a early optimistic solution.
Regards,
Syed Shujaath Ali.

Hi,
Maintain the material number length in your BW system, tcode- OMSL. Due to this you are getting error, conversion settings are not found for 0material. Check in your source system, what is the material number length has mantained by functional team.
It will sove your issue.

Business content installation query

Hi Experts ,
i am installing PM Business content installation , while installing 0PM_C03 there is an infoobject 0EQUIPMENT which is existing in present system but of old version   and mst of the attributes are time independent
now i want to install   business content in such away that current 0EQUIPMENT should not be disturbed and business content version has attributes that are time dependant
Question is shall i install 0EQUIPMENT or not, and let the old version remain , as 0EQUIPMENT is under use at few places
secondly if i dont install in future will there be any problem in loading PM data .
Please Advise,
Thanks in Advance,
Nitya

HI,
hi,
use the option Match (X) or copy.
The Match indicator is set as default in order to prevent the customer version being unintentionally overwritten. If the Content of the SAP delivery version is to be matched to the active version, you have to set the Install indicator separately.
The active version is overwritten with the delivery version if:
¡        The match indicator is not set, and
¡        The install indicator is set.
In other words, the delivery version is copied to the active version.
Note
If the Install indicator is not set, the object is not copied or matched. In this case, the Match indicator has no effect.
For more info search in forums or check the sap help.
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/frameset.htm
Regards
KP

Re: Business Content Installation

Hi,
I intalled cube with as usaual procedure but i can't see in workbench(RSA1). Can i know what is the problem? this is very important for me.
Thanks,
RK

Hi RK,
Check that Business content installation job has finished or not in SM37(job overview).
Once it completed, in RSA1> InfoProvider>InfoArea first Refresh your tree and click FIND to type your infocube name and search it.
you can get it surely.
NOTE: Assign points if it helps
Regards,
Arun.M.D

Business Content Installation with Remote Activation

Hi
During Business Content Installation, BI system attempts to do Remote Activation in the Source System
But in my case, it's searching for the datasources in the ERP source system instead of the CRM system
How do I get the Business Content to look into the right CRM system
Also, do I have to manually build the transfer rules of InfoSource to DataSource ? At the moment, I don`t have InfoSource automatically mapped to DataSource

Hi, before collecting the datasource to the right you have to select the source system by one of the following ways:
1) press Shift F7
2) click on the source system icon on top
3) goto menu Edit->Source system assignment
About your secod question check if the BI content already has a mapping defined if not you have to manually create the mapping.
Best Regards,
Brindha.

PM business content installation

Hi Experts,
i have to start on Plant Maintanance Business content installation , Could any one provide me the data flow , what are tha data sources, first do i have to activate daatsource and replicate then activate cubes etc .
Also could any one provide me details about PM and QM Integration
Thanks In Advance
Nitya

HI ,
You can find the BI content delivered objects for PM in the below link
http://help.sap.com/saphelp_bw33/helpdata/en/b0/e3163d5abd752de10000000a114084/frameset.htm
Regards,
Sathya

Business Content Installation

Hello to all,
I have a problem while installing Business content.
As per SAP Documentation...I selected the Cube and selected Before and After grouping option. Ex: 0CSAL_C01.
I checked the dependent objects under Info Objects for 0CSAL_C01. For some of the objects it's selected MATCH (to prevent overwrite and this is set as default).
Then I installed in back ground mode option.
Once the installation is done the 0COSTCENTER is overwritten (even if I selected Match option and it de-selected Install).
Can any one please explain me why this is happened? Any documentation on it?
Does background mode not recommended? Does it always overwrite???
Thanks

Hi,
I have found this statement at
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/frameset.htm
SAP recommends you use the Install in Background option, because installing a large number of objects can take a long time. Modifying objects that are already active can take an especially long time. Make sure that when you install objects in the background, the versions are not matched; the delivery version is always installed. They are not matched against any available customer versions.
Does it mean that even if I select match, will it overwrite?
Thanks

Error in Business Content Installation

Hi Guru's,
I am trying to install the Business Content object InfoCube 0FIAA_C04 where the steps i followed are:
goto RSORBCT >Infoprovider by infoarea >find 0FIAA_C04 >grouping >In dataflow before & After >Collection Mode >Start Manual Collection > drag and drop 0FIAA_C04.
After this i am getting list of error message at the bottom in RED as follows:
Object 0ASSET_ATTR_TEXT (3.x InfoSource,ISTD) could not be collected for object FI-AA-IO (Application,APCO)
Object '0ASSET_ATTR_TEXT' (ISTD) of type '3.x InfoSource' is not available in version 'D'
and so on for other objects also related to 3.x
please throw some light as to how we need to install 0FIAA_C04 without any errors and collect the objects related to 3.x infosource also.
if you have any document on this pls forward it to skd1982 gmail
Thanks,
Sujeet

Hai i assume your in BI 7 try to collect the cube independently i mean only necessary objects for cube and then try to install also see to that all infoobjects in cube are installed if missing collect those independently and move.
Then install datasource with dataflow before .when collecting see those objects which are necessary and then tick it installation ..
Goodluck.

Short Dump during Business Content Installation

Hi Gurus,
       I'm working on SAP BI 7.0. I'm getting a Short Dump Error stating " Program error: ASSIGN with length 0 in program "SAPLSNR3". " while I'm try to install the Business Content.
      I'm getting this error when I'm trying to install Business Content with Grouping Option " Data flow Before ", but I didn't face any problem when I started off with the Grouping Option " Only Necessary Objects ".
     I tried analysing this problem by going to ST22 transaction & during my analysis I found that in the said program " SAPLSNR3 ", there's LSNR3F01 include in which line number 178 is having a ASSIGN statement, where its trying to assign a computed value to some data variable. Now i understand that there's some problem with the value getting computed in the ASSIGN statement.
     I also tried finding some SAP Notes for the same problem, but to my misery I couldn't find anything appropriate. Could anyone of you who had faced similar problem help me out.
     For further assistance in making your replies much easier here in I'm adding the information about BI 7.0 system components.
           SAP ABAP:               Level 12
           SAP BASIS:               Level 12
           SAP BW:                   Level 14
           Business Content:       Level 5
Waiting for a early solution from U guyz.........
Regards,
Syed Shujaath Ali.

Hi,
Apply SAP BW: Level 19 or 20
Business Content: 10
patches .

Short dump in BIW 7.0 business content installation

Dear Friends,
I am trying to install business content in BIW 7.0 . In RSA1 ->BI Content --> Object Types > Query Elements> Grouping data flow before ---> Install.
Once I start this installation process it gives short dump.
The dump says
Short text
    Access via 'NULL' object reference not possible.
What happened?
    Error in the ABAP Application Program
    The current ABAP program "CL_RSD_IOBJ_VERS==============CP" had to be
     terminated because it has
    come across a statement that unfortunately cannot be executed.
Error analysis
    You attempted to use a 'NULL' object reference (points to 'nothing')
    access a component (variable: " ").
    An object reference must point to an object (an instance of a class)
    before it can be used to access components.
    Either the reference was never set or it was set to 'NULL' using the
    CLEAR statement.
Can anybody tell me why this dump occures. Am I missing any step in BI installation.
Regards,
Mahendra

Hi ,
If any one wants to install BIW 3.5 with R/3 4.7 (for extraction) connection in single hard disk, please call me on 9342820370.
Installation charge:1000/
Hard disc req: 160 GB.
ram: 1 gb
Thanks,
Laxman rao.
9342820370
#551,26 th main,
BTM ,Bangalore.

BI Business Content Installation

Hi Experts
I had BI-7 IDES installed in my system, i seee no objects are been installed from business Content.
Can any one please suggest how to proced to install the objects like infoarea, infoobjects, Data targets...
which one first and then goes next
your response is highly appreciated
Regards

Hi,
for complete flow installation like, SD, MM flows. Install datasources in source system and replicate before installing infosource in Source system.
in source system (R/3) RSA5 - Install Datasource and check in RSA6. replicate to in BI system.
In BI system, install objects with Indata flow before. and after sucessfull installation use Indata flow afterwards options for Quries and workbooks.
Regards
Daya Sagar

BI Business Content Installation error

Hi Experts,
Patch Level
BW              - SAPKW70012
BI CONTNET - SAPKIBIIP4
When I installing the business content, we are getting the following short dump error:
Runtime Errors         OBJECTS_OBJREF_NOT_ASSIGNED
Date and Time          29.03.2007 05:12:02
Short text                                                                                |
Access via 'NULL' object reference not possible.                                              |
What happened?
Error in the ABAP Application Program                                                         |
The current ABAP program "CL_RSD_IOBJ_VERS==============CP" had to be                         |
     terminated because it has                                                                    |
come across a statement that unfortunately cannot be executed.
Please let me know the solution for this error.
Advanced Thanks,
Chandra

I faced the same problem....is a Basis problem son support packages not installed....consult your basis support....is not a BW problem

Business Content installation error in Solman

Hi All,
While installing Business Content for the transactional data source "0CRM_SRV_PROCESS_H" in the Solman, I came accross the following error-
"IC=0CRM_PRI IS=80CRM_CNFI error when checking the update rules"
Can any one help me regarding this BC installation issue?
Edited by: S Baruah on Sep 3, 2009 12:12 PM
Edited by: S Baruah on Sep 3, 2009 12:14 PM

See the error log for the same...there will be procedure to correct the same...just follow that...
Also see if IC=0CRM_PRI IS=80CRM_CNFI are active.

Business Content Display Problem in SAP BW 3.5

Hi BW Gurus,
We are facing some tricky problem in BW 3.5
Details are below.
PI_BASIS     2004_1_640     0006     SAPKIPYI66
SAP_BW              350                     0009     SAPKW35009
BI_CONT              353                     0005     SAPKIBIFP5
in RSA1 Trcode am not able to see Business Content tab at all,but when i click on Transport Connection tab then i could see Business Content tab but NO objects are displayed in left Frame like InfoProviders by InfoAreas ,InfoObjects by Applicaton Component ,and even when i use the RSORBCT Tcode also the same sort of display.
Has anyone faced this problem earlier and solved if YES pls help in this regard as it is very urgent for me.
Regards,
BRB

#1. Check your SAP GUI version.
#2. I recently had what MIGHT be a similar problem. In using BEx WAD, my screen did not correctly display some of the components. The cause was a file that held status information on my screen properties, a file that had become corrupted. To solve the problem, all I had to do was log off all SAP components, then delete all files in the directory c:\documents and settings\[userid]\Local Settings\Temp.
Worked for me. If it works for you, email me an ice-cream cone!
Good Luck,
Doug

Business content installation in 7.0

Hi Experts,
I need a help regarding installing business content with 7.0.I tried installing with 3.x which had to be emulated ,it has a very erattic behaviour.I tried to install in 7.0 the problem is I am unable to find the data source in object types for data sources.Cansome body please tell me how this can be done.Thanks in advance.

All previous BI contents will be in 3.X flow, you need to install them and migrate those.
Before installing BI contents make sure you have BI_CONT installed.
Go to RSA1->System->Status -
> Component versions.
Hope this helps.

Business content installation problem

Similar Messages

Maybe you are looking for