Business Content Installation with Remote Activation

Hi
During Business Content Installation, BI system attempts to do Remote Activation in the Source System
But in my case, it's searching for the datasources in the ERP source system instead of the CRM system
How do I get the Business Content to look into the right CRM system
Also, do I have to manually build the transfer rules of InfoSource to DataSource ? At the moment, I don`t have InfoSource automatically mapped to DataSource

Hi, before collecting the datasource to the right you have to select the source system by one of the following ways:
1) press Shift F7
2) click on the source system icon on top
3) goto menu Edit->Source system assignment
About your secod question check if the BI content already has a mapping defined if not you have to manually create the mapping.
Best Regards,
Brindha.

Similar Messages

Business content installation query

Hi Experts ,
i am installing PM Business content installation , while installing 0PM_C03 there is an infoobject 0EQUIPMENT which is existing in present system but of old version   and mst of the attributes are time independent
now i want to install   business content in such away that current 0EQUIPMENT should not be disturbed and business content version has attributes that are time dependant
Question is shall i install 0EQUIPMENT or not, and let the old version remain , as 0EQUIPMENT is under use at few places
secondly if i dont install in future will there be any problem in loading PM data .
Please Advise,
Thanks in Advance,
Nitya

HI,
hi,
use the option Match (X) or copy.
The Match indicator is set as default in order to prevent the customer version being unintentionally overwritten. If the Content of the SAP delivery version is to be matched to the active version, you have to set the Install indicator separately.
The active version is overwritten with the delivery version if:
¡        The match indicator is not set, and
¡        The install indicator is set.
In other words, the delivery version is copied to the active version.
Note
If the Install indicator is not set, the object is not copied or matched. In this case, the Match indicator has no effect.
For more info search in forums or check the sap help.
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/frameset.htm
Regards
KP

Different Problems during Business Content Installation in BI 7.0

HI GURUs,
          I'm working on BI 7.0. Here I'm trying to do business content installation and facing the following problems.
Question 1:
          Let's say when I'm trying to install 0MATERIAL infoobject
Scenario 1:
( with Necessary Objects as Grouping), the job is finishing succesfully, but when I look for 0MATERIAL in Infoobjects of Modelling it is found in Unassigned characteristics Node where as it should have been in 0MMIC_CHA01 Catalog & secondly it's not in Active state. When I tried to manually activate it I'm getting the error stated in Fig 1b of attachment.
When I tried for Object Maintanance of 0MATERIAL in Business Content Screen i'm getting the same error (Fig 1a & 1b).
Scenario 2:
(_with Dataflow before and afterwards as Grouping_). In this scenario i'm getting the issue shown in fig 2. I would like to understand why this issue is popping up, specially the source system issue.
Note: The Figures are found in the file attached with this link.........
           [Bi Content INstallation Error Doc|http://rapidshare.com/files/269891244/BI_Content_Installation_Errors.doc.html]
Question 2:
         Why are many of the infoobjects like 0Customer, 0Material etc getting assigned to Unassigned Characteristics instead of getting assigned to their respective Characteristic catalogs.
Note: It would be much more helpful if the solution is provided with reference to SAP Note, though alternate solution is always welcome.
       Hoping for a early optimistic solution.
Regards,
Syed Shujaath Ali.

Hi,
Maintain the material number length in your BW system, tcode- OMSL. Due to this you are getting error, conversion settings are not found for 0material. Check in your source system, what is the material number length has mantained by functional team.
It will sove your issue.

Re: Business Content Installation

Hi,
I intalled cube with as usaual procedure but i can't see in workbench(RSA1). Can i know what is the problem? this is very important for me.
Thanks,
RK

Hi RK,
Check that Business content installation job has finished or not in SM37(job overview).
Once it completed, in RSA1> InfoProvider>InfoArea first Refresh your tree and click FIND to type your infocube name and search it.
you can get it surely.
NOTE: Assign points if it helps
Regards,
Arun.M.D

PM business content installation

Hi Experts,
i have to start on Plant Maintanance Business content installation , Could any one provide me the data flow , what are tha data sources, first do i have to activate daatsource and replicate then activate cubes etc .
Also could any one provide me details about PM and QM Integration
Thanks In Advance
Nitya

HI ,
You can find the BI content delivered objects for PM in the below link
http://help.sap.com/saphelp_bw33/helpdata/en/b0/e3163d5abd752de10000000a114084/frameset.htm
Regards,
Sathya

Does sap BI business content comes with transformation for standards

Hai Can anybody tell me whether SAP BI 7 business content
comes with fully loaded transformations with all routines in place like our 3x update rules.
For ex when i load 0hr_pa_0 and 0hr_pa_1 in 3x iam getting the routine with code in place for business contents when i migrate iam unable to trace the transformations in Business content can somebody help or is it we have to do the coding stuff for age calculation,age range etc in transformations
Plz explain.
Goodday.

Yes i figured out that myself anyhow have you worked on Hr business transformations how to go about the logic with standard in mind.
Goodday.

Comparing Business Content (D) with Active Content (A)

Hi, I am planning on installing some business content and notice that 0COMP_CODE is automatically marked for install and match.
How can I compare what I have in Active against the new business content to see what is different? Please don't tell me this is not possible...

Hi @ all,
i'm lookin for a way to compare my active BW structures with the existing content which is installed with SP or release update... I even want to see differences in startroutines or changes in transfer rules.
In my scenario, we used the DataSource 0UCCONTRACT_ATTR and the transfer rule from content.
The DataSource and the transfer rule were activated from content in 2003. In 2004, SAP published OSS note (713358) to correct inconsistent data.
But the new code wasn't activated, because we have many custom computations in the transfer rules.
Do you know any way to figure out those differences?
In SAP help, i found the transaction RSBICA (BI content analyzer). Is this the right tool?
Regards,
Philipp

Error in Business Content Installation

Hi Guru's,
I am trying to install the Business Content object InfoCube 0FIAA_C04 where the steps i followed are:
goto RSORBCT >Infoprovider by infoarea >find 0FIAA_C04 >grouping >In dataflow before & After >Collection Mode >Start Manual Collection > drag and drop 0FIAA_C04.
After this i am getting list of error message at the bottom in RED as follows:
Object 0ASSET_ATTR_TEXT (3.x InfoSource,ISTD) could not be collected for object FI-AA-IO (Application,APCO)
Object '0ASSET_ATTR_TEXT' (ISTD) of type '3.x InfoSource' is not available in version 'D'
and so on for other objects also related to 3.x
please throw some light as to how we need to install 0FIAA_C04 without any errors and collect the objects related to 3.x infosource also.
if you have any document on this pls forward it to skd1982 gmail
Thanks,
Sujeet

Hai i assume your in BI 7 try to collect the cube independently i mean only necessary objects for cube and then try to install also see to that all infoobjects in cube are installed if missing collect those independently and move.
Then install datasource with dataflow before .when collecting see those objects which are necessary and then tick it installation ..
Goodluck.

Business Content Installation

Hello to all,
I have a problem while installing Business content.
As per SAP Documentation...I selected the Cube and selected Before and After grouping option. Ex: 0CSAL_C01.
I checked the dependent objects under Info Objects for 0CSAL_C01. For some of the objects it's selected MATCH (to prevent overwrite and this is set as default).
Then I installed in back ground mode option.
Once the installation is done the 0COSTCENTER is overwritten (even if I selected Match option and it de-selected Install).
Can any one please explain me why this is happened? Any documentation on it?
Does background mode not recommended? Does it always overwrite???
Thanks

Hi,
I have found this statement at
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/frameset.htm
SAP recommends you use the Install in Background option, because installing a large number of objects can take a long time. Modifying objects that are already active can take an especially long time. Make sure that when you install objects in the background, the versions are not matched; the delivery version is always installed. They are not matched against any available customer versions.
Does it mean that even if I select match, will it overwrite?
Thanks

Short dump in BIW 7.0 business content installation

Dear Friends,
I am trying to install business content in BIW 7.0 . In RSA1 ->BI Content --> Object Types > Query Elements> Grouping data flow before ---> Install.
Once I start this installation process it gives short dump.
The dump says
Short text
    Access via 'NULL' object reference not possible.
What happened?
    Error in the ABAP Application Program
    The current ABAP program "CL_RSD_IOBJ_VERS==============CP" had to be
     terminated because it has
    come across a statement that unfortunately cannot be executed.
Error analysis
    You attempted to use a 'NULL' object reference (points to 'nothing')
    access a component (variable: " ").
    An object reference must point to an object (an instance of a class)
    before it can be used to access components.
    Either the reference was never set or it was set to 'NULL' using the
    CLEAR statement.
Can anybody tell me why this dump occures. Am I missing any step in BI installation.
Regards,
Mahendra

Hi ,
If any one wants to install BIW 3.5 with R/3 4.7 (for extraction) connection in single hard disk, please call me on 9342820370.
Installation charge:1000/
Hard disc req: 160 GB.
ram: 1 gb
Thanks,
Laxman rao.
9342820370
#551,26 th main,
BTM ,Bangalore.

BI Business Content Installation

Hi Experts
I had BI-7 IDES installed in my system, i seee no objects are been installed from business Content.
Can any one please suggest how to proced to install the objects like infoarea, infoobjects, Data targets...
which one first and then goes next
your response is highly appreciated
Regards

Hi,
for complete flow installation like, SD, MM flows. Install datasources in source system and replicate before installing infosource in Source system.
in source system (R/3) RSA5 - Install Datasource and check in RSA6. replicate to in BI system.
In BI system, install objects with Indata flow before. and after sucessfull installation use Indata flow afterwards options for Quries and workbooks.
Regards
Daya Sagar

Business Content installation error in Solman

Hi All,
While installing Business Content for the transactional data source "0CRM_SRV_PROCESS_H" in the Solman, I came accross the following error-
"IC=0CRM_PRI IS=80CRM_CNFI error when checking the update rules"
Can any one help me regarding this BC installation issue?
Edited by: S Baruah on Sep 3, 2009 12:12 PM
Edited by: S Baruah on Sep 3, 2009 12:14 PM

See the error log for the same...there will be procedure to correct the same...just follow that...
Also see if IC=0CRM_PRI IS=80CRM_CNFI are active.

Business Content- Installation in Background

Hello Experts,
Im trying to Install (0CA_TS_IS_2) infosource in the back ground, and checked the status of the job in SM37, it was active from almost an hour and came up with a system exception error_message.
Will I be able to install the infosource and IOC and IC again?
How do i have to delete the already installed InfoObject catalog in business content?
thanks in advance
Lucky

Hi Lucky,
Lenght of activation job only depends on number of objects in data flow.
When using "In data flow before" for instance, obviously activation will take a lot longer.
Please assign points if you found my answers usefull.
Thanks and regards,
Olav

Error during Business Content Installation of a query

Hi,
I was trying to install the Standard query(0IC_C03_Q0019) only its query elements and not infocube from Business content and after install(Simulation mode) it went into an error showing Bex transport request is not available or suitable and Error when activating element. We already have a request created by the basis team and we couldn't find the request while installing. Is the request creation for a BEx transport is different from the normal request creation??
Any help on the above problem would be appreciated.
Thanks & Regards,
Raj

Hi Raj,
<i>Is the request creation for a BEx transport is different from the normal request creation??</i>
Yes, Handling of changes to already transported Queries is different to other things of BW.
Refer :
http://help.sap.com/saphelp_nw04/helpdata/en/38/5ee7377a98c17fe10000009b38f842/frameset.htm
Re: Not able to Change or delete Query
With rgds,
Anil Kumar Sharma .P
Message was edited by: Anil Kumar Sharma

Business Content Installation Errors

Hi All,
I need to Install SD cube : 0SD_C03 through Business content. Before doing this, In ECC I have activated the relevant SD datasource : 2LIS_11_VADHR in RSA5 and then activated the same datasource in LBWE also. Then deleted the setup tables in LBWG. Coming to BI , I have replicated the datasource .
In Business content tab , I have set Grouping Option as Only necessary Objects , and Collection Mode as automatically and selected the Cube : 0SD_C03 through Object Type in Business Content tab. Clicked on INSTALL option . I am getting many errors like :
Activation of Objects with Type InfoObject
Checking InfoObject 0MATERIAL
Attribute 0RT_SEAROLL from characteristic 0MATERIAL not (actively) available
Hierarchy characteristic 0CM_CDT1 of characteristic 0MATERIAL is not active
Like this I am getting 0VENDOR,0PLANT , 0CM_CTAR, 0CM_CDT1...infoobjects not actively available. I have tried Installing individual Infoject , still it is failing with same Issues.
Also I have tried Installing the cube with all the Options in Grouping Objects , Still I am facing the errors.
Please do the needful
Regards,
Mahesh

Hi Ravikanth,
I ahve taken all the InfoObjects which were failling and tried Installing with Grouping Option as : Only Necessary Objects . Still I got the same errors .
My System Version is :
Software Component : SAP_BW
Release : 702
Level : 0009
Highest Support : SAPKW70209
Please do the needful.
Regards,
Mahesh

Business Content Installation with Remote Activation

Similar Messages

Maybe you are looking for