Business Content objects transport request error

Hi gurus
We have installed the Business content for CRM in development. Now we have moved the business content objects to Quality, but the issue was all the objects went and they are in the unassigned node. First time the infoarea for the respecitve objects were not selected. In development already the info areas were there, so i didnt select the infoareas for quality. But in quality nothing is existing.So my question is if i select the objects again with thier respective info areas, will i get the objects again aligned in proper order in quality. As already objects are there in unassigned nodes in quality will effect the next transport.
please help me regards
vijaykumar

Hi,
<i>So if i collect the objects again for transport with the respective infoarea, will i get the objects from unassigned nodes to the respctive info areas.</i>
It will definately works.
By the by:
And also collect respetive Info object Catelogs also.So that Infoobject sits under proper Info area.Otherwise you will get same problem with IO(what you got with Cubes).
With rgds,
Anil Kumar Sharma .P

Similar Messages

  • Error while activating the business content object

    Hi guru,
    We have installed a new BI system, and hence we need to activate all the business content object as they are available in delivery version.
    So as there was an requirement i tryed to activate the business content object ,that is 0mat (MATNR) material number,
    but once done with the installation when i try to find the object and display it
    that is i select the object 0mat , context menu and say display or change it does not show the complete screen as it appears for a characterstic and gives a error
    "_settings for material number conversion not found"_*
    so please help me out what is the problem
    Thanks

    Thanks Subash Balakrishnan for replying,
    but let me inform you that i already did that as i need to install this object and now the object is showing with green instead of grey,
    Now my problem is that after selecting grouping and collection when i go to infoobject menu under modelling and find out the object 0mat, it shows in green , but as i need to observe the properties of this object like data type , length etc , i select the object 0mat and right click and select display,
    then instead of showing me the object properties screen it gives me the error as mentioned above,
    so as you say it has to be in active versoin , but i can not view the normal screen which appears after creating any object ,
    now i hope my problem is quiet explanatory so please help me.
    Thanks

  • How to Install Business Content Objects

    Hi,
    1. How to Install Business Content Objects.
    2. Is there any types in Transport Request.
    Thanks,
    Madhu

    Hi,
    1. In the main menu of BI Modeling choose Data Warehousing Workbench: BI Content (Transaction RSOR). If you are already in the Data Warehousing Workbench, select the BI Content functional area by clicking on the corresponding pushbutton in the left-hand navigation window, or by choosing Goto ® Install BI Content.
    You can display or hide the left navigation window of the Data Warehousing Workbench with Navigation Window On/ Off.
    2. Collect the objects you want to activate and check your settings for activating BI Content with respect to Install, Match or Copy and Active Version Available.
    More information: Collecting Objects
    3. With Install, define how you want to install the BI Content:
    Installation Type
    Information
    Simulate Installation
    The system runs a test to see whether any errors are likely to occur during the installation. However, not all errors that may occur can be identified during simulation: Some error messages can only be generated when a real A version (not just a simulation) is available in the system. You should, therefore, only use the simulation function as a rough guide to help you identify and remove basic errors.
    Install
    The selected objects are installed immediately.
    Install in Background
    The selected objects are installed in the background.
    Install and Transport
    The selected objects are installed immediately and then written to a transport request.
    If you have a large number of objects, SAP recommends you use the Install in Background option because installing a large number of objects can take a long time. Modifying objects that are already active can take an especially long time to complete.
    Make sure that when you install objects in the background, the versions are not matched. It is always the delivery version that is installed. They are not matched
    http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/frameset.htm
    hope it helps.
    Regards
    CSM Reddy

  • Authorization issue while using business content objects

    Hi all,
    I am getting an authorization error while loading from DSO to Cube (for standard business content objects only). Even i am not able access the data in Bex reports from Standard cubes or DSO.
    The user is assigned to SAP_ALL .
    But there is no such issue while accessing user defined DSO or cubes.
    any solutions will be helpful.
    Regards,
    Varma

    Hi,
    Have you seen the error thru the SU53 t-code ? There you should see what is the missing authorization with the user.
    Regards, Federico

  • Difficulty in Installation Business Content Object

    Hi Gurus,
    Could some one tell me how to Install Business Content Object.Currently iam working on BI 7.Iam Doing in the following way .
    1.Source system Assignment
    2.selecting NecessaryObjects in Grouping
    3.Collection Mode-Collect automatically
    4.Install-Install&Transport
    Iam trying this procedure for 0Cust_Sales .But iam not able to install this infoobject .Please tell me where iam doing wrong.Please help me i will allocate points to all .Advance thanks.
    Bye
    Madhu

    Hi Select the Required Obj And Instal in background Then u will
    Transport it
    Else
    Select which objects are not installd  and install in background
    then go to Transport connection
    Transport it
    Regards
    Ogeti

  • Installing the Business Content Objects from R/3 in to BW

    From R/3 system with RSA5 (Installation DataSource from Business Content), I have selected 0PF_FUND_ATTR (Pension Fund in Personnel Management) and clicked the 'Transfer DataSource' and it was successful. Then I have logged on to BW and 'Replicated the DataSource' for Pension Fund Master data and I could see my new DataSource '0PF_FUND_ATTR' after the replication under R/3 Client Source System. I went to the list of Info Objects (AWB -->Business Content --> Object Types --> Info Objects --> Selection --> Input help for Metadata) and I didn't find my new 0PF_FUND_ATTR in the list. If I find it then could click the 'Transfer Selections' button at the bottom and I could 'INSTALL' it afterwards.
    Why I am not able to see '0PF_FUND_ATTR' in the list of InfoObjects and what was the problem. Could you please help me. Thanks in advance.

    Hi Venkat,
    Please try not to double post your question. It is the same group of people on all forums. I have given you a detailed answer on the other question, please look at it.

  • Business Content Objects on BI side for the business content data sources

    Hi All,
    We are doing a fresh implementation, and would like to know the step by step way through which i can know the relevant business content objects on BW side for a BC data sources ,,,,,
    0material_attr
    and 0mat_sales_Attrt
    As Per my understanding, once installed the BC data sources, the data would be feed to the master data info object 0material
    But the question is how do i know the complete Business content object on BW / BI side, and use the same building the entire flow.
    I have a hint that we can know it through the help.sap.com, and it would be highly appreciated and awarded for your expertises guidence, i have tried sercing in it, but dont know the correct trick.
    Even for the other  business content data sources.
    Example, the relevant infoobject or the DSO or the Cube,transformation, dtp,etc..
    Thanks
    Daljeet sing Nagi

    Hi Vineeth,
    Do you mean this way in the meta data repository, it will propose the flow for the business content object, and if yes, then even if they are in delivery version and not in active version, still it shall propose the flow for the business content objects,
    And to cut short my requirement,  as specified we are doing the fresh implementation,
    and i have identified that we would require first to load the material master data, and based on our present requirement, the data source which i have identified are
    0material_attr   (for the table mara in ECC system)
    0mat_sales_attr (for the table mvke in ECC system)
    all the fields data would be loaded to which master data info object,
    will it be 0material or ????
    Thanks for your support and surly as promised

  • Business Content instalation & Transportation steps

    Hi,
    iam a new in Sap bi implementation project.so iam gettiong somany doubts abot Business Content instalation & Transportation
    can you help me above concepts step by step,
    Thanks,
    chal

    Please search the forum before posting a thread
    Please do not post duplicate threads
    Business Content instalation & Transportation steps

  • How to remove Business content objects that are not required?

    Hi all of you,
    I had extracted some of the objects from business content from FI such as General LEdger and Asset Accounting. After extracting it, my c drive is full and I am not able to open any other file. So I want to remove these FI objects that I had extracted from Business Content. Can any one please guide as to how should I remove these already loaded Business content objects?
    Thank you.
    TR.

    Hi,
    You can right click on the objects (unused) and delete.
    actually when you activate business content its version is changes from "D" Delivered to "A" Active but these objects will always be available as D version to you. Even if you delete the activated objects now & need those in future you can reactivate them.
    hope it helps
    Regards
    Vikash

  • Displaying all enhanced Business Content Objects?

    Hey all.
    Is there a way to display all Business Content objects that have been enhanced/modified without checking each one individually?
    Specifically, I am wanting to know which standard InfoObjects in our system have been enhanced, but I don't want to have to manually check each object to determine if it has been enhanced or not.
    Thanks in advance.

    check table RSDIOBJ field TSTPNM
    (exclude 'SAP' and 'DDIC')
    Edited by: RafB on Jun 3, 2009 2:35 PM

  • Installation of Business content objects

    HI all
    Can any one please tell me How to install Business content objects in to our Infoarea.
    Thanks
    S.S.

    Hi Surya,
    hopefully you connected you R/3-System to your BW, go to "Business Content" by transaction "RSA1" and select your BC in the shown trees. The selected BCs can be dragged-and-dropped from left to right. Switching "Simulate Installation" under the button "Install" is a good idea, more important is the option "Only necessary objects" under "Grouping" - in all other cases you would get a lot of InfoObjects, -providers and so on you never need and which would fill your system with superfluously garbage.
    After a successful installation you can use all the new Objects  
      That's all
        Ralf

  • Regarding Business Content objects

    Hi gurus,
    I have loaded Ecc6 in my LAPTOP. I can able to see AWB page in RSA1, but when I clicked on BIContent, Iam able to see only technical content, I could not find Standard Business content object(cubes,DSO's,objects..etc).Please let me know how to install those object in my system.
    Thanks,
    Naveena.

    hi,
    you have to download BI content from service market place from sap. and load
    the BI Content in data ware house workbench. then only you can able to install
    (view) business content.
    regards
    harikrishna N

  • Business content object  installation

    Hi Friends,
    What care i should  take while installing Business content object
    Regards
    siva

    Dear Srini,
    You have to follow the following steps while activating the business content.
    1. Identify the ods, cubes that required for ur scenario
    2. Identify the master data fields, transaction data sources .
    3. In the src system check in RSA6 whether those datasources available, if not activate them from RSA5.
    4. Replicate them to BW.
    5. Identify the Infoobject catalogs activate them by selecting grouping dataflow before, Edit->Src Sytem, Collection->automatic.
    6. Activate the ods objects  by selecting grouping dataflow before.
    7. Activate the cubes  by selecting grouping dataflow before.
    8. Activate queries  by selecting grouping only necessary objects.
    Assign points pls.......
    Best Regards,
    SG

  • Releasing Transport Request Error.

    Hi all,
    I have created the Query Objects under a Transport Request in Development System and has to be transported to the QA system.
    One thing i have observed is, when u create a Transport request for an Object.
    Two Transport Requests will be created,
    For Example,
    If "A" object is assigned a new transport request 1, two Requests will be assigned to this Object "A".
    Those requests would be 1 and 2.
    But here 1 request is empty and 2 request is holding the Object "A".
    So while transporting the request 2, even since 1 is assigned to the object, even it should be transported,
    but im gettin the following message as below and hence the Transport cannot be done,
    "Task 1(TR 1) is unclassified and does not contain any objects,
    As soon as you include objects in the task/request, the SAP system automatically assigns a type to the task"
    So can any1 plz help me out what was the error and my next steps to be followed.
    Thanks,
    Sowrabh

    Sowrabh,
    It's like creating Task under one perticular Request no...
    Go to RSA1-Transport comnnection _ Drag the query you are intended to transport and check whether all objects are under same request..If not change the Owner of the object to you userid and then try to create a request..
    Cheer's
    HVr.

  • XI Business content for MDM - Syntax error in IDOC adapter

    Hi mates,
    I'm trying out the Master Data Harmonization scenario for Vendor data with R/3 as the client system. I'm using SAP delivered XI Business content for MDM. The mapping program is generating ADRMAS and CREMAS IDocs but the IDOC adapter reports that there is a syntax error in ADRMAS IDOC. Find below the details.
    <i><SAP:Category>XIAdapter</SAP:Category>
      <SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_IDOC_METADATA</SAP:Code>
      <SAP:P1>Segment 'E1BPAD1VL', segmentnumber '000001' not correct in structure ADRMAS02</SAP:P1>
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Error: Segment 'E1BPAD1VL', segmentnumber '000001' not correct in structure ADRMAS02</SAP:Stack>
      <SAP:Retry>M</SAP:Retry></i>
    Generated ADRMAS IDOC is
    <i>  <?xml version="1.0" encoding="utf 8" ?>
      <ADRMAS02>
      <IDOC BEGIN="1">
      <EDI_DC40 SEGMENT="1" />
      <E1ADRMAS>
      <OBJ_TYPE>LFA1</OBJ_TYPE>
      <OBJ_ID>0000500140</OBJ_ID>
      <CONTEXT>0001</CONTEXT>
      <E1BPAD1VL SEGMENT="1">
      <FROM_DATE>00010101</FROM_DATE>
      <TO_DATE>99991231</TO_DATE>
      <NAME>Swift Transportation</NAME>
      <COUNTRY>US</COUNTRY>
      <COUNTRYISO>US</COUNTRYISO>
      <LANGU>E</LANGU>
      <LANGU_ISO>EN</LANGU_ISO>
      <SORT1>SWIFT TRANSPORTATION</SORT1>
      <TIME_ZONE>CST</TIME_ZONE>
      <E1BPAD1VL1 SEGMENT="1">
      <LANGU_CR>E</LANGU_CR>
      <LANGUCRISO>EN</LANGUCRISO>
      <ADDR_GROUP>BP</ADDR_GROUP>
      </E1BPAD1VL1>
      </E1BPAD1VL>
      </E1ADRMAS>
      </IDOC>
      </ADRMAS02></i>
    Strangely, the control record is blank. I looked at the XSLT program, it is coded that way. I do not understand the reason. Is the error pointing to the control record?
    Look at the code sample from XSLT mapping program
      <xsl:for-each select="IDOC/*/E1ADRMAS">
           <IDOC BEGIN="1">
           <!-- The header data of each single ADRMAS-IDoc needs to be there but does not require specific data -->
                <EDI_DC40 SEGMENT="1"/>
                <xsl:apply-templates select="."/>
           </IDOC> 
      </xsl:for-each>
    How can an IDOC w/o control record be posted?
    Did anyone come across this error? Whats wrong/missing?
    I appreciate ur inputs.
    thx in adv
    praveen

    Moorthy,
    I tried reloading the IDOC metadata from IDX2. Still I get the same error.
    Regd, IDOC w/o control record, can u elaborate on "dynamic value while posting IDOCs". From where, XI message SOAP header with Business System replaced by corresponding logical system names?
    Thanks
    Praveen

Maybe you are looking for

  • How to hide sidebar in mail in landscape view on iPad

    Every time I rotate to landscape mail the side bar appears and shrinks the size of the message. You can view the message full size in portrait mode but not in landscape mode.... am I missing something here? I have looked for ways to hide the sidebar

  • How to effectively manage large table which is rapidly growing

    All, My environment is single node database with regular file system. Oracle - 10.2.0.4.0 IBM - AIX A tablespace in this database is growing rapidly. Especially a single table in that tablespace having "Long Raw" column datatype has grown from 4 GBs

  • How to create a new instance of a method

    How can I create a new instance of public int IsPrime1(int arg) method in my main program and execute it. It has to be a non static method. I have this code import java.math.*; public class IsPrime {      public int IsPrime1(int arg){                

  • Apple charged for free application

    I downloaded Opera which is mentioned as a free applicaiton but my credit card has been charged for this.

  • Best strategy for archiving some of your calendar

    I'd like to archive all events in my calendar pre-2004. I'd also like to be able to re-import these events at a later date both as a separate calendar (which can be deleted again) and/or back into the calendar that they came from. What is the best st