Business Content & Process Chains

Hi All,
I would like to know if process chains are required to update standard reports data or the data can be refreshed from the report to see the updated records.
Thanks in advance.
Kind Regards
Niren

Hi,
If your job is to just use the reports and not to worry abt where data comes etc, then yes, its enough if you refresh the report and the report will get the latest updated data from the base Infoprovider which is the physical storage of data.
Process Chains are something that will pul data from the source system and load it into the base Infoprovider, fro where the report picks up the data. so if the infoprovider has the latest data, report will obviously pick up the latst data.
If the infoprovider needs to be updated with latest data from the source system, then you run the process chain.
Thanks

Similar Messages

Admin cockpit - Business Content Process chain Activation failure

Hi,
we are working in Admin cockpit in sand box server.
we are activating the Business Content Process chain by taking all variants (begin with 0TCT) but we are getting the error message that Process AND has no predecessor.
Could you kindly suggest any thing to move further.
Thanks & Regards,
Shaliny. M
Edited by: shaliny mega on Mar 19, 2008 7:04 AM

Hi shaliny,
As mentioned in this post
https://www.sdn.sap.com/irj/sdn/forums.
Have u collected the Source system for which ur collecting the PC when u r activating Business conent?
Collect the source system when u r activating the PC. Give a try.
if it is useful assign points.
Regards,
Senthil

Tech. Content Process Chain (0TCT...)

Hi,
I installed the technical content for BW7.0 and they are visible in BW but when I installed the technical business content process chains, they are not visible in RSPC. I did search for them but could not find any where. What can be the reason?
Please advice.
Regards,
Anil

Further to above post, While activating the technical content, system could not collect some of the infopackages as they were not in the business content. Is there any relation between process chain non visibility?

Technical Content Process Chain Schedules

Hello,
We are on BW 7, and I was curious how often companies are running their technical content process chains?
Is weekly typical, or should they be running more often?
Thanks,
Nick

Thanks Dennis!
Is there an order in which the TCT chains should be executed in nightly?
Our queries are executed during the day business hours 7 am - 6 pm
Our Data loads are primarily overnight.
The chains we have for TCT are:
0TCT_MD_C_FULL_P01 - Content Master Data
0TCT_C2_DELTA_P01 - Data Load Statistics - Delta
0TCT_C0_DELTA_P01 - Query Runtime Statistics - Delta
0TCT_MD_S_FULL_P01 - System Master Data
Thanks,
Nick

Install BI Content Process Chain 0TCT_MD_C_FULL_P01

Hello,
I am installing BI content Process chain (0TCT_MD_C_FULL_P01) for BI statistics.
I did the install but when I try to activate it says " Process has no predecessor" . Has anyone installed this chain and how did you do it. Can you please expalin me steps that u went through.
Best regard
Arjun

Try this.
http://help.sap.com/saphelp_nw70/helpdata/EN/3c/52304260c44446b401a0fd5b90f4a2/frameset.htm

How to see the installed BI content process chain?

Hi Expert,
I've installed a BI content process chain, called 0TCT_MD_C_FULL_P01, but I can not see it in tcode RSPC, also can not use it. Can you tell how to make it available in RSPC?
Thanks a lot.
Happy.Bear

Hi,Check in RSPC under "Not Assigned"
And also chcek in Tables related to PCs,
RSEVENTCHAIN Event Chain Processing Event Table
RSEVENTHEAD Header for the event chain
RSEVENTHEADT Header for the event chain
RSPCCHAIN Process chain details
RSPCCHAINATTR Attributes for a Process Chain
RSPCCHAINEVENTS Multiple Events with Process Chains
RSPCCHAINT Texts for Chain
RSPCCOMMANDLOG System Command Execution Logs (Process Chains)
RSPCLOGCHAIN Cross-Table Log ID / Chain ID
RSPCLOGS Application Logs for the Process Chains
RSPCPROCESSLOG Logs for the Chain Runs
RSPCRUNVARIABLES Variables for Process Chains for Runtime
RSPC_MONITOR Monitor individual process chains
Thanks
Reddy

Scheduling Technical Content Process Chains

Hello experts,
I'm trying to schedule the Technical Content Process Chain as per SAP Note 934848 - step 4.
This step says:
4. Schedule Process Chains.
Please schedule the technical content process chains (0TCT*) in transaction RSPC. "INIT" process chains need to be scheduled once and "DELTA" process chains should be scheduled periodically.
But when I open RSPC I can't find anything with (0TCT*).
Can anyone help me?
Best Regards,
Rui Romba

Hi Vikram,
We have everything installed.
Recently we had an auditory from SAP AG and they detected that we needded only to schedule the Technical Content Process Chain.
Regards,
Rui

BI Content Process Chain

Hi Experts,
I installed NW 7.0 sr3 ABAP system, and then installed BI_CONT release 703 as add-on.
But our BI consultant not able to find all the objects when he is trying to activate process chain from the bi content.
Can anyone please tell me which version i have to install to get all the necessary objects.
Thanks in advance
Uday
Edited by: basisuday on Aug 20, 2010 9:47 AM

Hello experts
I am not able to find support package name.
When i click on package level button from SAPM tcode
BI_CONT 703 0000 - Business Intelligence Content.
Is my BI_CONT add-on installed successfully?
And also i am not able to see BI_CONT in imported packages list.

Error while activating process chains from Business Content

Hi All,
I am trying to activate the SAP Business Content Process Chains, which load data to 0PM_DSO2 in Plant Maintenance Area -
1.Delta Upload : MTTR / MTBR (0PM_DELTA_P02)
2.Initialisation : MTTR / MTBR (0PM_INIT_P01 )
And they are failing with the error
"Object 0PAK_BZJNGI4SYTTJM5DXY8IPMHB0C could not be found in version
Message no. RS_EXCEPTION280"
"Message Text
Object 0PAK_EYQGZ09K9SFFUMOFRQ0730LJ0 could not be found in version
Technical Data
Message type__________ E (Error)
Message class_________ RS_EXCEPTION (Exception Messages)
Message number________ 280
Message variable 1____
Message variable 2____ 0PAK_EYQGZ09K9SFFUMOFRQ0730LJ0
Message variable 3____
Message variable 4____ "
In the collected objects, these two infopacks are not present also.
Can you please let me know how to proceed?
Many Thanks in Advance,
Vineeth

Hi
Make sure these 2LIS_17_I0NOTIF and 2LIS_18_I0NOTIF datasources are being installed.
Check these links.
http://help.sap.com/saphelp_nw70/helpdata/EN/e7/082888ca2f994794986448568aec2d/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/EN/e7/082888ca2f994794986448568aec2d/frameset.htm
Chandu.
Edited by: Chandu on Jan 22, 2009 2:24 PM

Process Chains for BW Statistics (Technical Content)

Hi Guys,
Just a quick question - anyone know of any Business Content Process Chains for BW Statistics?
I can't seem to find any - but just looking for confirmation that none exist and I will then have to built my own.
Thanks
Scott

Hi,
Yes, you have to build your own. Thats the same scenario we faced too.
With Regards

BI Admin Cockpit: Program variant missing in Process chain

Hi,
I'm installing BI Admin Cockpit and have troubles with Process chains. I followed the installatin guide and had problems activating process chains: 0TCT_C2_INIT_P01 and 0TCT_MD_C_FULL_P01 because of missing InfoPackages. I solved this by installing an correction as it is described by Note: 1432353. After this I activate these Process chains manually in RSA1 Administration--> BI Content -->Process Chains (all necessary objects). No Problems occured. The Problem is when I'm start these Process chains, I get an error on the last step. There is an Abap Programm with an variant. This variant is missing in the System.
The Variants are:
- RSTCC_Dataload (0TCT_C2_INIT_P01)
- RSTCC_QRuntime (0TCT_MD_C_FULL_P01)
I tried also to get these Process chains with Dataflow before and after to view if I forgot anything to activate, but there is no programm variant. Can anybody explain, how to get these programm variants?
Thanks and greetings,
Sebastian

Sebastian,
I faced the same problem. Basically what I found was that variants were not defined. So I manually created the value for variants:
1. For RSTCC_DATALOAD assign value TCT_C2_DELTA_P01
2. For RSTCC_QRUNTIME assign value 0TCT_C0_DELTA_P01
Our system info is similar to what you have and I in fact had Basis team patch BI Cont to level 6 but this did not help. If I were to take a guess i would have to say that these variants are missing in the 7.01 BI version, you can either choose to create a OSS message with SAP and wait for them to fix it or you could fix it manually.

OBJECTS_OBJREF_NOT_ASSIGNED Dump while Installing Process Chain

Hi Gurus,
I got OBJECTS_OBJREF_NOT_ASSIGNED dump while installing Business Content process chian "0TCT_C2_INIT_P01".
Also 6 info packages were not delivered in business content for the above chian.
Any Help.
Regards,
Anil

Check if this note helps..though it is for infoobjects
<a href="https://websmp202.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=1019055&_NLANG=E">Note 1019055 - Runtimer errors when activating InfoObjects</a>
Message was edited by:
Manga Paidikondala

Missing Infopackages in business content for BI Admin cockpit installation

Hi Gurus,
We are on NW 2004s SPS 11,BISP12. While installing the BI Admincockpit, we found that following infopackages are missing and not delivered.
0PAK_934GEKKIBBDKPVMVDJHVNPIMV
0PAK_99MQNPZISKNSNWKT9HF2CWPLK
0PAK_BFYU3MMMU2T2WOI50MXHCEH07
Is there any new SP or OSS note for this issue?
Please help.
Regards,
Anil

Hi,
Thanks for the responses. I am talking about the technical content process chain "0TCT_MD_C_FULL_P01". Can some one or SAP provide the environment details of the info packages used in the same process chains so that I can create them manually (e.g. data target info object, data sources used etc)
Regards,
Anil

Transport of process chains

I added new mail messages to my Meta chain in each local chain process type. will I have to transport the entire process chain again the underlying process types
or only the mail message variants are fine to be sent to QA and PRD
Edited by: AAL123 on Sep 19, 2011 1:04 PM

Hi,
You can move the variants only but its always recommended to move the entire chains to next systems. But make sure that in case if the process chain was included in any of the previous transports, then that transport should have been released.
Also while collecting make sure that you are not including any objects like Data sources etc. Also in case if the chain is already in production then no need o worry. But in case if the chain is being transported for first time then do use the option "Start using a Metachain or API" or set the schedule date to future date else the chain starts running automataically as soon as the chain is moved to production.
Also check the below link, it might be helpful to you:
http://www.sap-img.com/business/transport-process-chains-to-test-system.htm
Hope that the above info is helpful for you?
Thanks

Error in installing process chain from Business Content.

Dear Experts,
I have successfully installed the Technical Content from Business Content and now trying to install Content Master Data process chain for info package for the same but its showing error.
<b>Technical Name for Process Chain : 0TCT_MD_C_FULL_P01</b>
Error after instaling from BI Content : <b>Process AND has no predecessor.</b>
Finally, while checking in RSPC it comes the name of Process Chain but its not showing anything.
Also, one more thing is I am trying to install in development system and if that occurs successfully than transport to production as production directly don't wanted to do.
Thanks in advance.
Regards,
NJ

ithink u have not activated the process chainafter creating the process chain u might have saved it with out activating the process cahin so that is the reason why it is showing name name but northing in the chain first activate the cahin then it iwill show
try this
Aravindan pagadala
satyam

Business Content & Process Chains

Similar Messages

Maybe you are looking for