Business Content -- Queries

Hi everyone,
I am looking for a easy way to look for Business Content since I am not yet connected to a BW system (I need to do this through the SAP site)
I have found a great deal of content except the following:
ERP-MM-SRV
SRM-EBP
SRM-CCM
Could someone give me pointers in where to search on the site...?
Thanks a lot!!
Cheers,
Andrew

Andrew
SRM
http://help.sap.com/saphelp_nw04/helpdata/en/36/7aeb3cad744026e10000000a11405a/content.htm
SCM-MM/Procurement/Inventory
http://help.sap.com/saphelp_nw04/helpdata/en/9d/ea86206cf2e445a5b10ee1bf098c96/content.htm
SRM-EBP
http://help.sap.com/saphelp_nw04/helpdata/en/76/68073c52619459e10000000a114084/content.htm
Hope this helps
Thnaks
sat

Similar Messages

  • Standard Business Content Queries not found

    Hi all
    As i was installing the business content queries for the CRM Analytics, I have found all the Queires except two queries. When checked in the SAP Help portal i can see these two queries as newly added to the list. But they are not available in the Business Content queries list.
    I am working on BW 3.5 and queries which i didnt find are
    0MKTG_C01_Q7001 and 0CSAL_C12_Q002
    Any help is greatly appreciated.
    regards
    vijaykumar

    hello vijay,
    for each patch level of each BW version I believe a supporting OSS note is released.Please search in OSS notes stating as 'BW 3.5 patch level XY' or raise an OSS message witb this query.
    In the help page for the new BC queries,does it state any detail about the required version/patch of BW?
    Usually systems are kept 1-2 patch levels behind the latest SAP released patch level.
    My system is at 3.5 patch 17.
    I would suggest u bring system atleast to 16 or 17 as 10 is quite old patch level.
    cheers,
    Vishvesh

  • Inventory Management (0IC_C03) Business Content queries

    I have the following queries which are delivered when I activate 0IC_C03.  The queries below have also been activated as part of the model.
    Is there any additional queries which should/can be activated against this InfoProvider and of the list below are any redundant? Thanks
    Blocked Stock
    Consignment Stock at Customer
    Inventory Turnover
    Quantities of Valuated Project Stock (as of 3.1 Content)
    Quantities of Valuated Sales Order Stock (as of 2.1 Cont.)
    Receipt and Issue Customer Consignment Stock
    Receipt and Issue of Blocked Stock
    Receipt and Issue Quality Inspection Stock
    Receipt and Issue Stock in Transit
    Receipt and Issue Vendor Consignment Stock
    Scrap
    Stock in Quality Inspection
    Stock in Transit
    Stock Overview
    Stock Overview (as of 3.1 Content)
    Stock Range of Coverage
    Valuated Stock
    Valuated Stock (as of 3.1 Content)
    Vendor Consignment Stock

    hi Niten,
    by choosing that 0IC_C03 and using grouping 'in dataflow afterward' in business content activation, you should get all the queries.
    you can cross check in rsa1->metadata repository->local object (business content).
    in sap help
    http://help.sap.com/saphelp_nw2004s/helpdata/en/77/65073c52619459e10000000a114084/frameset.htm
    (expand left node)
    hope this helps.

  • Queries from business content

    Hi,
    When we install the out of the box business content queries from business content where are we able to see those queries. ( Like when we install infocube and dataflow before and we will be able to see it all in modeling area, same way where can we see the queries).
    Also when we install the queries will the objects like structures,variables, restricted key figures and calculated figures will also get installed.?
    Thanks for all the help in advance.

    Well the queries will always be attached to an InfoProvider, so you can easily see a list of queries under each InfoProvider. You can see this in the Open Dialog in Bex, or in the BW system you can do this in RSRT. Just F4 on the query text box and lookup up the queries by InfoArea. You can get a whole list of the queries, but then that would mean going to tables and deciphering the query GUIDS.
    Another way is to go to the Metadata Repository and looked at queries within the Local Objects (Activated objects).
    Hope this helps...

  • Business Content Query

    Hi All,
    I would like to know the importance of Business Content Query, Like:
    1. why they are used?
    2. What is the advantage of Business content query against a customized query for a Business content cube?
    Any help would be appreciated.
    regards
    Praveen

    Hi Samala,
    For each Module we have Business content queries
    for example : SD,MM,PM,PP etc For these we have business content queries.
    We take SD as eaxample: SAP has given business content quries in SD, If the client satisfis with the Business content query, There is no need to create new query. We can use the same query.
    If the client has some new requirement like adding 1 extra field to the business content report, at this time we need to customize the query.
    Advantages of Business content : No need to create new query, Lot of time and manpower save
    Regards,
    Marasa.

  • Business content document

    Hi everybody,
    Can anyone help me on,
    How to prepare documents on Business content queries?
    If possible can send sample one?
    Thanks in advance.

    SAP Library is the best source of information. Check out the following link: [http://help.sap.com/saphelp_nw04/helpdata/en/37/5fb13cd0500255e10000000a114084/frameset.htm]

  • How to find the standard queries in business content

    hi
    pls explain how to find the standard queries in a business content
    assign full points

    Hi,
    Incase you want to know details about the standard queries, then the best source would be the help documenations on BI content:
    http://help.sap.com/saphelp_nw2004s/helpdata/en/37/5fb13cd0500255e10000000a114084/frameset.htm

  • How to install cubes and queries from Business content in BI 7

    Hi all,
       Could you please help regarding how to install Info Cubes and Querries from Business content in BI 7.0
         And pl send some OSS notes on BW Statistics in BI 7.0
    Thanks in advance

    And also you can go thru the following link:
    http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/content.htm
    Regards,
    Gattu

  • Problem while installing a query from Business Content

    Hi all of you,
    I am trying to install this particular query Inventory Turnover from the cube 0IC_C03 (Material/Stock Movements) from Business Content. Now in the third pane in Business Content under Active version available column across the name of this cube there is a calendar symbol.
    a.     So does it mean that the cube 0IC_C03 (Material/Stock Movements) is installed along with all the objects that are dependent on the cube and all those objects on which the cube is dependent. (NOTE: I had selected the grouping option as “In data flow afterwars”)
    b.     When I collapse Query Element I find that some of the queries are not installed. So I expanded Inventory Turnover query, right clicked on it and selected Install All Below.
    c.     I am getting this error, “Abort system error in program SAPLRRI2 and form LI_SETZEN-01-“ when I execute the query Inventory Turnover. However in Business Content when I installed the report Inventory Turnover under the cube Material Stock/Movement I didn’t get any error anywhere. Everything was activated successfully without any errors.
    Please tell me how do I install this Inventory Turnover from business content and how do I execute this report from BEx.
    Thank you.
    TR.

    Hi Arun,
    Thank you for that quick reply. I want to activate only the query and not the cube. I did as you advise me but still I am getting the same error when I run the Inventory turnover report from BEx.
    I am able to run other reports from the cube IC_C03. But not this report Inventory turnover. I have also checked the cube and there is data in the cube.
    Kindly adivse what to do.
    Thank you.
    TR.

  • Business Content Activation of business partner

    Hi,
    I am activating standard business partner from business content.The business partner we have right now is of version 3.3/01 and has lot of custom fields. When I am activating the version 3.5/03 I want to make sure I don't lose those custom attributes and also want to know how this will impact the cubes,ODS,Infosets,Update rules,Transfer rules, queries etc associated with this InfoObject. Can anyone please help me out with this issue.
    Also while trying to simulate installation of an InfoObject,it ends up with red light. It gives me a message that one of the attributes in the latest version is a navigational attribute and the older version it was a display attribute.Hence while simulating I check both the install and match/copy box so that I can transfer the selections without having to make it navigational but end up with the red light. Is it advisable that I go ahead with installation or how should I go above it.
    Thanks,
    Kal

    Kal,
    when you activate the new version , the version is changed from M to A and the new business content would become the active state...
    But then since the old BPartner IOBJ is being used in ODS.. cubes etc , I am not sure if your Business COntent installation can proceed since there is master data as well as the same being used across BW.
    You could try a merge instead to see if he new fields as part of the new business content is carried over.
    Hope it helps.
    Arun
    Assign points if useful

  • Query modification problem after Business Content upgrade

    Hi,
    We have upgraded two systems from Business Content 3.1 to BC3.3. After the upgrade we have a problem when opening queries for modification: a dialogue window is opened and system says:
    "<i>AUTOMATIC CORRECTION
    The following objects were not found when accessing server
    Press 'Repair' to correct the problem (incorrect parts of the query are automatically deleted)
    Press 'Cancel' to undo the last action
    Missing objects:
    - InfoObjects
    |  |- InfoObject 0HIER_VERS
    - Affected Items
       |- Hierarchy version</i>"
    Strange thing is that the problem cannot be reproduced on consultants' laptops, only on clients' PC-s, so we believe there must be something about Windows/Excel security that produces the error message.
    Have you ever experienced this (kind of) problem before? Do you have any idea what I should check?
    I checked
         - Macro security settings in MS Excel,
         - logged on to the PC's as Administrator
         - logged on to BW with clients'/consultants' user ID's on clients'/consultants' PC's, problem appeared only on client PC-s
         - SAP GUI version (it is the same)
         - MS Excel, MS Windows version (the same)
    I have also checked InfoObject 0HIER_VERS, it really does not exist in the system. But it does not exist in our Production system either, while the query is completely the same in both systems.
    0HIER_VERS is a "technical attribute" (as I read in an SAP documentation - however, I don't really understand this term), it is attached to 0CS_GROUP (Consolidation group).
    Thanks,
    Csaba

    Hi,
    Before checking that did u acvtivate and update all the datasources at the source system level.
    Thanks
    sampath

  • SEM business content

    Can anyone give some advice on the following: SEM 4.0 has been installed on our ECC 5.0 system. In client 000 many planning areas exists, however in the working client 020 none.
    How do I activate the business content in the working client?
    Kind regards,
    John.

    Hi Sat,
    The link you provided deals with activating Business Content in BW, but I have checked that and all cubes and queries have been activated successfully.
    But I didn't mean the business content in BW, but in ECC (more specific: the planning areas in BPS).
    Any ideas?
    John.

  • What should be needed for cost reports to be activated in Business Content?

    Hi experts,
      I am completely new to Business Content so sorry if I ask a silly question. Currently we are trying to migrate custom fixed queries to queries from Cubes in Business Content, because the company has growed in the past years.
      Our first stage is to have the new queries that report costs for the company.
    The reports should consider manufacturing costs such as
    - maintenance
    - outsourced special services (providers)
    - new machinery
    (not energy or service costs)
    This reports should include country, plant, date, amount, etc.
    I have been searching for the modules or cubes that should be activated for this requirement.  So far i found that in MM there is a cube 0SRV_C01 that includes external services.
    The data from the InfoCube External Services enables you to carry out analyses of services. Using this data, you can obtain answers to questions such as the following: "How much of each service was ordered from a certain vendor?" "What was the order value per service for a certain plant?"
    However there should be another information where manufacturing costs could be exploited.
    ¿Can anyone give me some advice on how to resolve this requirement? ¿ does anyobody know which cube(s) include the information I am looking for?
    Thanks,
    help wil

    Hi David,
              Check here...........
    BI Content
    http://help.sap.com/saphelp_nw70/helpdata/en/3d/5fb13cd0500255e10000000a114084/frameset.htm
    SCM BI Content
    http://help.sap.com/saphelp_nw70/helpdata/en/29/79eb3cad744026e10000000a11405a/frameset.htm
    Procurement
    http://help.sap.com/saphelp_nw70/helpdata/en/e9/62073c44564d59e10000000a114084/content.htm
    Invntory
    http://help.sap.com/saphelp_nw70/helpdata/en/fb/64073c52619459e10000000a114084/frameset.htm
    Regrads,
    Vijay.

  • Business content upgradation risks

    Hello BW xperts,
    I am a newbie in SAP BW using BW version 3.1. Our client team is planning on a business content upgrade from version 3.1 to 3.2, in which I don’t have any experience. They want to know <b>what are the risks involved</b>, especially,during situations <b>when the standard SAP objects, being used in queries, get modified;is there a need to manually activate the objects or does it  happen automatically?</b>
    Can anybody please help me out with this?
    Thanks in advance,
    Minuj....

    http://service.sap.com/upgrade-crm
    https://websmp202.sap-ag.de/~form/sapnet?_SCENARIO=01100035870000000202&_SHORTKEY=01100035870000429833&
    Re: ALE Developer Role
    http://help.sap.com/saphelp_nw2004s/helpdata/en/index.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/2e/6d66587d9011d396b60000e82de14a/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/44/b21f98be886a45a4bb7e123e86e4c2/content.htm
    Use these links hope this will help you..?
    MSR

  • Finding data in a datasource/ Business Content Query

    Hello,
    can you help me with this one -- background to this problem is shown below:
    Question:
    1.
    No data was found in my infocube so I went o R3 to see if the datasource had any data in it by running rsa3 but found no datasource 2LIS_02_S012, although rsa5 shows that it exists. What could be happening?
    2.
    Also, how do I see the queries which come with the InfoCube? When I go into BEx, I see the dimensions to create my own queries, but where are the ones which comes with the Business content for me to use?
    Background to Questions----
    I was experimenting with an MM InfoCube 0PUR_C01, and my research indicated that the datasource which supplies this this infocube with data is 2LIS_02_S012. The notes on this datasource indicates it could be extracted as a standard extraction or LO. I did standard, rsa5, rsa6, etc...replicated in BW, etc.
    I later created and InfoCube zpur_c01 and copied from 0pur_co1, etc. ...then later created and infopackage and loaded data into the InfoCube for the purposes of reporting.

    Hi Caud,
    To answer your first question.
    - The datasource 2lis_02_s012 that you have seen in rsa5 is in the delivered version you need to transfer this into the active version. Select the datasource in rsa5 and click the transfer datasource button. After you have done this you will see the datasource in rsa6.
    Also since this datasource is a Logistics Info Structure the LIS reporting should have been activated and in use.
    For your second question
    - If you have already identified a standard business content query that you want to use through the metadata repository, you can activate the report through the business content tab in rsa1.
    Hope this helps.
    Regards,
    Demetrius

Maybe you are looking for

  • Why do animated GIFs stop animating

    I just upgraded to Muse CC Prerelease July 29, 2013 Version 6, Build 717. Some animated GIFs stopped animating. Should I go back to my May 31st version of Muse? Is there a released version of Muse? Animated GIFs have always had problems when an effec

  • Cannot run application HRSystem due to error deploying to DefaultServer.

    I am new to java and jdeveloper. I am tring my hands on the tutorial on HRSystem. Below is the error message recieved while deploying the application. Dont know what to do please help. The plaform is linux. Thanks DefaultServer startup time: 12661 ms

  • How to handle [object Object] in textArea (Flex 4.5)

    Hello My code: protected function myDG_selectionChangeHandler(event:GridSelectionEvent):void                         var selItems:Vector.<Object> = event.currentTarget.selectedItems;                                              var numItems:Number =

  • Describing content of the package.

    Hello I'm trying to describe the content of the package from PL/SQL procedure. So far I have been using DBMS_DESCRIBE and ALL_ARGUMENTS VIEW. I have no problem with finding procedures/functions and their parameters. What I'm having problem with is fi

  • Importing photobook pages into a new photobook

    I've got a lot of experience working with PSE project files but I can't figure out how to take a page from an existing PSE project file and copy it into another project file. I've tried dragging and dropping (doesn't work), and can't seem to find a m