Business Content query cant able to see in Bex.

Hi BW Experts,
I have installed the query 0PS_C04_Q1000 from the business Content.After installing, I couldnt find the query in Bex analyzer. But in the business Content the query is showing that it is already installed.
Can u pls help on this issue.
Thanks,
Jelina.

RRMX->Open Queries->do a search giving the query name 0PS_C04_Q1000 in Description/Technical Name area and click ok. If it is installed properly, you should find it here.
Also check table RSRREPDIR if you can see it. If not, re-install the query from BI content again and try.
Hope this helps..

Similar Messages

Finding data in a datasource/ Business Content Query

Hello,
can you help me with this one -- background to this problem is shown below:
Question:
1.
No data was found in my infocube so I went o R3 to see if the datasource had any data in it by running rsa3 but found no datasource 2LIS_02_S012, although rsa5 shows that it exists. What could be happening?
2.
Also, how do I see the queries which come with the InfoCube? When I go into BEx, I see the dimensions to create my own queries, but where are the ones which comes with the Business content for me to use?
Background to Questions----
I was experimenting with an MM InfoCube 0PUR_C01, and my research indicated that the datasource which supplies this this infocube with data is 2LIS_02_S012. The notes on this datasource indicates it could be extracted as a standard extraction or LO. I did standard, rsa5, rsa6, etc...replicated in BW, etc.
I later created and InfoCube zpur_c01 and copied from 0pur_co1, etc. ...then later created and infopackage and loaded data into the InfoCube for the purposes of reporting.

Hi Caud,
To answer your first question.
- The datasource 2lis_02_s012 that you have seen in rsa5 is in the delivered version you need to transfer this into the active version. Select the datasource in rsa5 and click the transfer datasource button. After you have done this you will see the datasource in rsa6.
Also since this datasource is a Logistics Info Structure the LIS reporting should have been activated and in use.
For your second question
- If you have already identified a standard business content query that you want to use through the metadata repository, you can activate the report through the business content tab in rsa1.
Hope this helps.
Regards,
Demetrius

Error While Installing the Business Content Query

Dear Friends,
We are in BI 7.0 and trying to install a business content query "Balance Sheets Profit and Loss Statement" but while activating we are getting the error that some Particular Request has not been found or not suitable. we checked for that request in SE09 and found that there is no such request existing in the system. So what could be the cause of the Error and what to do for successfully Installing the Query.
Thanks ..
Anurag

Are you assigning a new request or creating a new one? Try to assign to a new request if you are not doing so.
Thanks
Wind

Business Content Query

Hi All,
I would like to know the importance of Business Content Query, Like:
1. why they are used?
2. What is the advantage of Business content query against a customized query for a Business content cube?
Any help would be appreciated.
regards
Praveen

Hi Samala,
For each Module we have Business content queries
for example : SD,MM,PM,PP etc For these we have business content queries.
We take SD as eaxample: SAP has given business content quries in SD, If the client satisfis with the Business content query, There is no need to create new query. We can use the same query.
If the client has some new requirement like adding 1 extra field to the business content report, at this time we need to customize the query.
Advantages of Business content : No need to create new query, Lot of time and manpower save
Regards,
Marasa.

Business Intelligence folder not able to see,

Hi All,
I have installed the Enterprise Portal 7.0. only on server. I am trying the intergation of the BI system in portal. I am not able to see the "Business Intelligence" folder under Portal Content>Portal Content(brower)>Content Provided by SAP>platform_add_ons>
I have not installed the BI system with portal. I have installed JAVA BI system with ABAP BI (I want to integrate the BI in portal which is installed on different host). Please help me to resolve this issue.
Thanks,
Shambo

Hi,
Thanks for quick reply. Actually I have installed the ABAP+BI JAVA. With this by default the EP is installed. But I want to integrate the BI system in EP server installed on different host.
I am following the same procedure which I get in SDN.Please help me to resolve this.
Thanks,
Shambo

Error in Business content Query

Hi,
we have activated the business content for General Ledger (New). We have successfully executed all data loads.
but, the standard query 0FIGL_V10_Q0001 which is activated, is not executing properly.
It throws up a message "Value '0' is invalid for property 'Ref. Characteristic' of element 'Balance Sheet Value'" and no data is displayed.
On analysis, we find that, for the calculated key figure Balance sheet value the Ref. characteristic in the Aggregation tab is set as [0]0.
Has anyone faced this issue before. could anyone help us to fix it?
Regards,
Sainath

Hi,
Please apply the note 1015402 to resolve this issue.
Best Regards
Manoj Kumar

Cant able to see new value and old value for change in purchase order text

Hi all ,
I am not able to see changes done in material's purchase order text in material master. When i use tcode MM04 to see changes done material master it does not report new and old value for change if it is done in purchase order text of that material .
Thanks in advance ,
Shikha

Hi Shikha,
I'm not sure it works or not. But you can try SCU3 t.code and table DBTABLOG. May it can help you out.
I also faced this type of issue in Plant data and it get resolved.
Try and let me know...
Regards
Sunil Sisodia

Hi I cant able to see some web photos in my ipad showing 'unable to load' .. Some photos able to see but still almost 90% I can't ...pls help me to clear this issue ...thanks in advance

Hi
My ipad is not able to see some of the photos .... I can see with google images and all .. When I am loading some applications or safari images getting the same issue ..first it's showing 'loading' then its happens like 'unable to load ' pls help me to solve the issue ..thanks

When you say that you can't find them anywhere, I assume that you mean that you can't find them on the iPad even though the storage figure says that the photos are there.
You can try this. I don't know if this will work for you but this was recently discovered as solution for phantom photos. This was copied from a post started by gail from maine
Delete all of your Recently Deleted photos from your Recently Deleted folder
Then go to Settings>General>Date & Time, and change the date back to last September when iOS 8 came out, and then go back to the Recently Deleted folder. Although at the Album level it will still say "0" if you tap on the Album, you will be greeted by all of the "Recently Deleted" photos that have surpassed the 30 day limit. Mine went back to when I installed iOS 8.
She found this in a post where txforever was the person that discovered how to do this.
More photos in settings than photos app shows

Varaince cant able to see in copa report

Hi,
previously my scenarios is MTO now for one division they have changed it MTS.
i could able to settle prodution order through ko88 during settlement of production order variance is calculated without any error.
i could not able see to these variance in copa report.
and that to variance is coming in ke24 only when i select production order.
during settlement of production order copa douctment is generating sucessfully.
please help if i had missed any configuration.
thanks
kareem

hi,
i have not catch ur points here,
production order selection characteristics means i have selected order characteristic in define segment leval charactersitics
and record type in ke35 from record type to to record type.
when i select production order number in ke24 actual line i could able to see copa report that belong to varaince that which have settled during ko88 of production order.
do i have missed any configuration part please suggest me.
thanks
kareem

Infocube 0PS_C01 not available in BW Business Content& query 0PS_C02_Q0005

Hi
In Project systems module, the Infocube 0PS_C01 not available in BW Business Content& also queries relevant to the infocube are alos not available.
how to get the relevant infocube. Please let me know.

Hi,
Check the relevant Datasource for your Infocube in help.sap.com. Install from RSA5 and RSA6 in ECC side.
Replicate in BW and Install your Cube from BI content.
Actually you can check your cube in Meta data repository.
Regards,
Suman

ESS sca file content is not able to see in EP PCD

Hi,
we got .sca file relating to ESS and we deployed that but the content is not yet come to the portal content dircetory. Do anyone of you having the idea about this type of file and how to get the content into the portal.
what this .sca file will do relating to the ESS?
is it again we need to import the ESS businesspackage on the portal side or both are same(.sca file of ESS and the BP)?
can anybody help me!
Regards,
sireesha.

Hi Sireesha,
Which version of ESS you are deploying?
As you have mentioned .sca file I am assuming this is based on WebDynpro version (?)
ESS50.x : You can directly import the business package
          from portal
          System Administration>Transport>Import
          by copying the business package contents
          under the following directory
          \usr\sap\XXX\SYS\global\pcd\Import
          (Server Side Import best practice)
ESS60.x : You can deploy through SDM
          After successful completion if you don't see
          the contents just restart the server.
Hope this helps.
Regards
-Venkat Malempati

Error During Business Content Query Activation- Very Urgent

Hi All,
I am trying to install few queries in business cube 0pur_c01, which is already in production and already lot many queries are running.
As per requirement i have to install New quries in the 0Pur_C01
0PUR_C01_Q0012 : Ordering Activities
0PUR_C01_Q0015 : Purchase Order Values
0PUR_C01_Q0013 : Vendor Comparison re Purchase Values
0PUR_C01_Q0004 : Values Purchase Order Delivery Invoice
0PUR_C01_Q0023 : Total and Average Order Value
Out of these five quries i am unable to install 0PUR_C01_Q0012 : Ordering Activities and geeting error message during simulate install rest queries has been installed already without any issue once i have unselected the already transported
element.
I am doing the same for query 0PUR_C01_Q0012 : Ordering Activities but getting error message
Error when activating element 9W6JIW7YMO04XVOZ5ATLLFLPB
BEx transport request 'SBDK900497' is not available or not suitable
Regards
Premanshu Gupta

Hi,
To rectify this error,
<i>BEx transport request 'SBDK900497' is not available or not suitable</i>
Go to Transport Connection, there click on "BEX" "Create tranport request for BEX", there insert a new row, and create a new request. This is the default request for BEX queries.
While transporting , dont tranport this request, collect the objects which you want to tranport and create a new request.
<i>Error when activating element 9W6JIW7YMO04XVOZ5ATLLFLPB</i>
For this error, check the object in meta data repository, whether the object is in active version or not.I think this object is not in Active version thats why you are getting this error.
Assign points if it helps....

Problem while installing SAP Business Content - Query

Hi SAP BI experts,
I am trying to install standard SAP BI contents, but getting following error while installing following queries.
1. Warehouse Stock Analytics - Inventory Turnover - 0IC_C03_Q0024
2. Inventory Turnover - 0IC_C03_Q0017
I am getting the following error while simulating install:
1. Error when activating element 4WXUV5NRUZR0GYY1WYB22EUIA / Message no. R9118
2. Object directory entry R3TR ELEM COAFSEIKGP51QJYSMX9FCEI9E does not exist / Message no. TK753 (for Calender Day)
Please share your inputs.
Thanks in advance!
Regards,
Bidyut

Hi Bidyut ,
Try to install the following objects with the option 'DataFlow Before and Afterwards ' under the grouping option .
This will collect all the necesary objects that are required for its activation .
After the necesary objects have been collected , tick mark the necessary objects then choose install .
Regards,
Lokesh

Cant able to see V1 Master Oranization in Change Organization window

Hi ,
When i'm trying to change the Organization to V1 it is not displaying in change organization window in Inventory Responsibility.
I checked in Inventory -> Setup -> Organizations -> Organizations -> Vision Operations. The disable date is blank.
So please help me out.
Thanks,
Mahesh

Please do as follows
Inventory --> Setup--> Organization --> Organization Access -->
Org-->V1
Application --> Inventory
Name --> Inventory,Vision Operations(USA)

PlzzHow can we check the version of Business Content in ECC 5.0 version??

Hello Experts,
Plz tell me.. How could we check the version of the business content installed for ECC 5.0? I tried to search for the same in the forum but I couldnt.. plz let me know as I doubt that the business content is not properly installed for ECC 5.0 in my PC. and also I see only Technical content for Object Types under Business Content in AWB.
I always thank people awarding points!!

Hi Ajay, Thanks for the Info regarding PI...
I am using my ECC 5.0 as BW system as it got BW 3.5.. and I am really trying to see the Business Content Cubes like 0PUR_C01,0PUR_C04 etc... and in RSA1>Business Content> Object Types I could see only the Technical Content cubes..(not able to see the SD,MM..etc related cubes)...
And yeah I have R/3 PI installed with 2004_1_490 Version.. and so I could see all the Business Content DataSources in the source system...
Is there one more PI for BW?? or the same as above??
Plz through the light..!
Regards,
Sapster.

Business Content query cant able to see in Bex.

Similar Messages

Maybe you are looking for