Business event with resources and resource type

Hi,
I am doing bdc for tcode pv10,i want to update the resource type and resource,i tried with it,i do not get idea,pls give me u r suggestions.
cheers,
karthi

Hi,
You need to click on the 'Resource Selection' button on the top left hand corner of the create event screen.
If you do not see any resources there, it means you have not added resources to your event type. Go to PP01, and create relationship A022 (requires resource type).
For rooms and materials, this is fine. For instructors, you need to create relationship A026 (is held by) also.
Regards,
Neha
<i><b>PS:Reward if helpful</b></i>

Similar Messages

Creation of Business Partner with External BP #,ID type and Identifications

Hi Group,
I have a query on creation of Business Partner with External BP #,ID type and Identification # (along with the Firstname,Lastname,Email, Phone & etc.,) things.
the thing is that I was using a BAPI called "BAPI_BUPA_FS_CREATE_FROM_DATA", to create a BP and I was not able to have an option available for these things (External BP #,ID type and Identification # ) along with that BAPI.
So please kindly let me know how these things can be fetched from a BAPI which can accomodate all the above things mentioned.
Please kindly let me know how it can be achieved.
thanks in advance.
Regards,
Vishnu.

Hi Gerhard,
Infact this reply was very useful, but ,while using the BAPI "BAPI_IDENTIFICATION_ADD" while creating the Id type and Id #s, this BAPI was not enabling this.
I was trying to use this BAPI to create ID #, and it's desc, but, this BAPI was returning like "This BP # does not exist" (in some cases) and in some other cases, it is keeping quiet without giving any indication as whether the things have been updated or not... and also when I checked, things were not getting reflected.
your help would be very much appreciated.
thanks & regards,
vishnu.

Creating Business event in training and event management

Hi Gurus!!!,
can you please instruct me the steps involved in creating business events in Training and Event Management.(HR Module)
Thanks and regards,
Prosper

Hi Prosper,
You need to configure lot of settings, prior to Business Event, because one BE is based on various elements like Location, Attendee type, Instructor, Fees, Resources, Time Schedule, Services, BE type, BE Group.
After configuring all these for BE type, you need to create a BE for the BE type. Then, you can go for day to day activities like Booking, Pre Booking, Cancellation.
I hope, this link will help you
http://help.sap.com/saphelp_47x200/helpdata/en/26/865738c185f50ce10000009b38f8cf/frameset.htm
Good Luck
Om
Reward it, if u feel helpful.

How IT Resource and Resource Objects are linked?

Hi All,
I am new to OIM product and learning the basics. I have 2 questions.
I am not able to figure out how an "IT Resource" and "Resource Objects" are linked?
We always link "Resource Objects" and "Process Definition". How "Process Definition" picks the values provided in "IT Resource"?
Thanks in Advance
Jatin

Hi
I don't think "IT Resource" and "Resource Objects" are anyway linked with each other.
"IT Resource" is something where you specify all the resources in the system which are not meant to be provisioned to users. Like proxy server or Email server in your organization.
"Resource Objects" is a place where you define all the resources that you provision to users.
This is my understanding, which might be wrong. I think someone more experienced user can give better answer to this question.
-Kiran Thakkar

Error -200141 when doing buffered events with DAQmx and PCI-6602

When doing buffered events with DAQmx and PCI-6602 I get error 200141 - Data was overwritten before it could be read by the system.
This error is generated ONLY with random inputs >200/sec.
My setup is :
DAQmxCreateCIVCountEdges(taskhandle,"Dev1/ctr3"....
DAQmxCG+FGSampClkTiming(taskhandle,"/Dev1/FPI35",...
DAQmxSetCICountEgdesChan(taskhandlem,"", "/Dev1/80MHZTimeBase")
DAQmxSetChanAttribute(taskhandlw,",",DAQmx_CI_DataXferMech,DAQmx_Val_DMA,0);
Can somebody help ?

i'm getting the same Error-200141, while reading semiperiods. (Meas_Buffered semiperiod continous)
while loop ex.rate seems to be pulsewidth*no.Samples to read. in my case PW=60ms
Input buffer size measured with Property node= 10000
why this error happens?? i cant use any mode other than implicit timing for semi-period measurement right??
more info: all the ai channels are used ~ 16 differencial.
i found one solution which is _ reinitializing the whole task if an error occur. is this the right way??
Kudos always welcome for helpful posts
Attachments:
Counter_1_Meas Buffered Semi-Period-Continuous_main_lv09.vi ‏34 KB
SemiPeriod_Reconnect Counter on Error.vi ‏35 KB

How to store data in JavaFX 1.2 Mobile with Storage and Resource API

I'm need to store some numbers and strings in an application that will be deployed in a HTC HD2 device with JavaFX 1.2 When run on desktop, everything works perfectly. But after being installed in the device, the application won't store data in files. I thought JavaFX was able to do that, according to its documentation (http://download.oracle.com/docs/cd/E17802_01/javafx/javafx/1.2/docs/api/javafx.io/javafx.io.Storage.html)
I do it like this (just the part that stores integers)
public var availableGifts : Integer[] = [0,0,0];
var highscoresFile = Storage {
source: "AvailableGifts.txt"
public function writeConfiguration() {
try {
var resource : Resource = configurationFile.resource;
var outputStream : DataOutputStream = new DataOutputStream(resource.openOutputStream(true));
outputStream.writeInt(availableGifts[0]);
outputStream.writeInt(availableGifts[1]);
outputStream.writeInt(availableGifts[2]);
outputStream.flush();
outputStream.close();
println("Data stored!");
} catch(ex : IOException) {
ex.printStackTrace();
The application is self-signed, just in case. But it won't store data in the mobile device... I need some help with this!

Agh, the problem is not in how data is stored, because it IS being stored. The problem is that inputstream.available() seems to always return 0 in the mobile device, so the file seems to be empty.
But that's a different problem.

Find resources and resource name

I'm using LV6i and I'm a little bit unhappy with that new data type VISA
resource name which is input to the VISAOpen VI.
If I use the FindResource VI, it returns a list with all the found
resources. How can I select out of this list and wire the result to VISA
resource name input. Is there a function to convert string into
VISAResourceName? I found only VISAResource controls and constants, aren't
there any conversion functions? If not, FindResources is useless, cause you
can't use that information for further processing.
Second question: Is the VISA Resource control a hidden FindResource because
it offers me some resources in my system, but not all of them (in fact, it
offers me COM1 and LPT1 but not GPIB).
Last but not least a question
of a more programming philosophy nature: If I
execute a VISAOpen to a instrument on the GPIB bus, it changes into remote
operation. But why does the VISAClose not the exact reverse the VISAOpen,
e.g sends a GoToLocal to the device, so that the instrument returns into
initial condition ? I find it more consistent to leave a VISA execution
chain with device on local. If I want to set a device into local I have to
use the Misc VI with loc xx input. And this VI doesn't use the VISA resource
name but a string. That's rather inconsistent.
Any opinions?
Oliver Friedrich

Okay, first, I put strings into VISA resources all the time. A VISA resource name is a special type of string. Create a VISA Resource Name control and then create a local variable from it. Wire your string to the local variable. When the program is run the string will be transferred in to the VISA Resource Name control. Be sure to enable the Allow Undefined Names in the VISA Resource.
A VISA resource control only lists VISA resources that have been defined in NI VISA. If you have another type of VISA loaded on the system, or have not defined aliases in MAX, then they will not show up in the VISA Resource Control. Yes, this is annoying.
I personally would not like VISA close to send a device back to local mode. I do not like languages (or word processors - hear
this Microshaft?), that assume they know what I want to do. There is much more flexibility in letting the user decide when to go to local mode. If you want a close VI that also goes to local, then write your own library routine that does this.
Rob

Events with Scrpts and JavaScript in ADOBE forms

Hello All,
On an Adobe form I have field for sub totals. I am trying to choose 'Events with Scripts' on the SHOW pull down values and choose JavaScript in the language. I was able to do this some time ago but now, I am able to choose Events with Scripts but not being able to choose JavaScript for language.
I do not have much exp. with Adobe or JavaScript but I checked whatever I could think of but could not figure out. Any body ran into this issue before? Any ideas?
Please post and Thank you ...

By trial and error, what I did is, chose 'Calculate' in the Show menu then chose JavaScript in the Language pull down menu. Then added my JavaScript code. Then went back and change 'Calculate' in the Show menu to Events with Scripts. Saved and executed it . It worked.

Extra overhead with Collection and List types

The documentation says about Collection and List types :
"There is extra overhead for Kodo to maintain collections where each
element is not guaranteed to be unique."
Why is it so ?
Thanks in advance.
Regards.

We can make some optimizations when we know each element is unique.

848P Neo trouble with 6600GT and resource conflicts

Hey everyone, built this computer not too long ago out of parts furnished to me. I originally had a GeForce 4 MX 4000. So I just purchased a XFX GeForce 6600 GT for obvious reasons. lol (Thinks to self, maybe I should have went ATI)
Since then I've been in for a world of hurting. During Post or any like screen I can't read anything. just a bunch of jumbled characters. The USB went whacky, off and on power wise. And I'm stuck with the default VGA drivers in Windows. Error 10 - Device could not start is listed for the card in Device Manager. Although I am still using this card for video, since there is no on-board video on this board.
Farther research into my situation revealed the card, my USB Host Controllers AND one of my Nics are all on IRQ 16. That's lovely. I can't find out how to force these devices, particularly my video card, to a different IRQ. I would like it to be on empty IRQ 11 if I could (Can't find much in the BIOS that is talked about on this board). But now I am wondering, this wouldn't explain my problems before XP even loads would it? Though my USB mouse seemed like it was flickering here and there during/after post. Maybe the two interfering trying to interupt the CPU at the same time could explain the garbled graphics. Right now I'm using PS2 mouse and keyboard. no USB devices hooked up and same problems.
Sorry for the long post. Heres the IRQ Table and also some memoryaddressing conflicts that I dont know how to correct.
==========
IRQ 0   System timer   OK
IRQ 1   Standard 101/102-Key or Microsoft Natural PS/2 Keyboard   OK
IRQ 4   Communications Port (COM1)   OK
IRQ 6   Standard floppy disk controller   OK
IRQ 8   System CMOS/real time clock   OK
IRQ 10   Intel(R) 82801EB SMBus Controller - 24D3   OK
IRQ 12   PS/2 Compatible Mouse   OK
IRQ 13   Numeric data processor   OK
IRQ 14   Primary IDE Channel   OK
IRQ 15   Secondary IDE Channel   OK
IRQ 16   NVIDIA GeForce 6600 GT    OK
IRQ 16   Intel(R) 82801EB USB Universal Host Controller - 24D2   OK
IRQ 16   Intel(R) 82801EB USB Universal Host Controller - 24DE   OK
IRQ 16   AOpen AON-325 10/100M Fast Ethernet PCI Adapter   OK
IRQ 17   Realtek AC'97 Audio   OK
IRQ 18   Intel(R) 82801EB USB Universal Host Controller - 24D7   OK
IRQ 19   Intel(R) 82801EB USB Universal Host Controller - 24D4   OK
IRQ 20   Microsoft ACPI-Compliant System   OK
I/O Port 0x00000000-0x00000CF7   PCI bus
I/O Port 0x00000000-0x00000CF7   Direct memory access controller
I/O Port 0x000003C0-0x000003DF   Intel(R) 82865G/PE/P/GV/82848P Processor to AGP Controller - 2571
I/O Port 0x000003C0-0x000003DF   VgaSave
IRQ 23   Intel(R) 82801EB USB2 Enhanced Host Controller - 24DD
IRQ 23   Realtek RTL8139/810x Family Fast Ethernet NIC
IRQ 16   NVIDIA GeForce 6600 GT
IRQ 16   Intel(R) 82801EB USB Universal Host Controller - 24D2
IRQ 16   Intel(R) 82801EB USB Universal Host Controller - 24DE
IRQ 16   AOpen AON-325 10/100M Fast Ethernet PCI Adapter
Memory Address 0xA0000-0xBFFFF   PCI bus
Memory Address 0xA0000-0xBFFFF   Intel(R) 82865G/PE/P/GV/82848P Processor to AGP Controller - 2571
Memory Address 0xA0000-0xBFFFF   VgaSave
I/O Port 0x000003B0-0x000003BB   Intel(R) 82865G/PE/P/GV/82848P Processor to AGP Controller - 2571
I/O Port 0x000003B0-0x000003BB   VgaSave
========
What a mess. Any help on any of this would be appreciated. Thank god for people much wiser and experienced that myself.

Hi,
If display card is faulty.............which does seem to be
Have a look for the MSI range......... known for using best quality mem chips in VGA cards.
Del
Little old FX 5200 still going strong (Beat a 9200 256Mb card )

Custom report with FAGLFLEXA and "Document type"

We have new GL and we must do a custom report like this:
Hierarchy of ProfitCentre ______Credit for mm.yyyy___ Debit for mm.yyyy
Profit centre 1_____________________ c1_______________d1
Profit centre 2_____________________ c2_______________d2
ect. ....
The value of c1 is the sum of monthly credit for a profit centre, for a group of accounts, but only for certain "document type".
The "Document type" is what worries me.
I have already written a similar report with Report Painter, reading data from the table FAGLFLEXT (0FL library), but took the full credit from the account (for all "document type"), without restrictions on the document type (the table FAGLFLEXT not contain the field "document type").
The data I need in my report, I can see with T. FAGLB03. Double-clicking on, for example, the value of credit you go into detail, and data can be selected for different "Document type". I still do not understand how it works and which tables use the T. FAGLB03 to have these data in detail.
Please, help me what exactly to do?My questions are these?
My principals questions are these:
1 . I think, inevitably, i have to link two tables: FAGLFLEXA (the one with the given to him) and GKFP that contains the field BLART (Document Type). This is the right way? Is there another way?
2 This report can be create with one of SAP tools: Report Painter, SAP Query, ... or the only solution is to write a program in ABAP?
3. If i'm not asking too much, you could give me a step-by-step description of how i should proceed?
All suggestions are welcome.
Thank you in advance. Many points to assign who will help me to solve this problem

I know PowerShell can help you with the Get-SCSMRelatedObject command but you would have to write a small script to get that to work en mass.
http://smlets.codeplex.com/

I am trying to experiment with Tweens and Easing Types in ActionScript 3.0, Adobe Flash CS4. help

I am using ActionScript 3.0, Adobe Flash CS4 software
I have created Tweens for some MovieClip properties and experimented with some of the easing types.
This is what I have managed to create and works okay!
grow_btn.addEventListener(MouseEvent.CLICK, grow);
shrink_btn.addEventListener(MouseEvent.CLICK, shrink);
rotate_btn.addEventListener(MouseEvent.CLICK, rotate);
hide_btn.addEventListener(MouseEvent.CLICK, hideClip);
show_btn.addEventListener(MouseEvent.CLICK, showClip);
fadeOut_btn.addEventListener(MouseEvent.CLICK, fadeOut);
fadeIn_btn.addEventListener(MouseEvent.CLICK,fadeIn);
function grow(e:MouseEvent):void {
var scale1:Tween = new Tween(instrument, "scaleX", Back.easeIn, 0, 1, 3, true);
var scale2:Tween = new Tween(instrument, "scaleY", Back.easeIn, 0, 1, 3, true);
function shrink(e:MouseEvent):void {
var oneSmall:Tween = new Tween(instrument, "scaleX", Back.easeInOut, 0, -.2, 3, true);
var twoSmall: Tween = new Tween(instrument, "scaleY", Back.easeInOut, 0, -.2, 3, true);
function rotate(e:MouseEvent):void {
var spin:Tween = new Tween(instrument, "rotation", Elastic.easeOut, 0, 360, 5, true)
function hideClip(e:MouseEvent):void {
instrument.visible = false;
function showClip(e:MouseEvent):void {
instrument.visible = true;
function fadeOut(e:MouseEvent):void {
var tweenfadeOut:Tween = new Tween(instrument, "alpha", None.easeOut, 1, -.1, 3, true);
function fadeIn(e:MouseEvent):void {
var tweenfadeIn:Tween = new Tween(instrument, "alpha", None.easeIn, 0, 1, 3, true);
I am having trouble creating Tweens and add easing types for the action script below!
I keep getting error message (“Access of undefined property Sine”) for example when I type
function hideClip(e:MouseEvent):void {
var noClip:Tween = new Tween(instrument, "visible", Sine.easeOut, 0, 1, 3, true);
Can anyone help???? The original script is below
hide_btn.addEventListener(MouseEvent.CLICK, hideClip);
show_btn.addEventListener(MouseEvent.CLICK, showClip);
function hideClip(e:MouseEvent):void {
instrument.visible = false;
function showClip(e:MouseEvent):void {
instrument.visible = true;

make sure you have imported the Sine class
import fl.motion.Sine;

Sun Cluster: Graph resources and resource groups dependencies

Hi,
Is there anything like the scfdot (http://opensolaris.org/os/community/smf/scfdot/) to graph resource dependencies in Sun Cluster?
Regards,
Ciro

Solaris 10 8/07 s10s_u4wos_12b SPARC
+ scha_resource_get -O TYPE -R lh-billapp-rs
+ echo SUNW.LogicalHostname:2
+ [ -z sa-billapp-rs ]
+ NETRS=sa-billapp-rs lh-billapp-rs
+ [ true = true -a ! -z sa-billapp-rs lh-billapp-rs ]
cluster2dot.ksh[193]: test: syntax error
+ + tr -s \n
+ scha_resource_get -O RESOURCE_DEPENDENCIES -R sa-billapp-rs
DEP=
+ [ true = true -a ! -z sa-billapp-rs lh-billapp-rs ]
cluster2dot.ksh[193]: test: syntax error
+ + tr -s \n
+ scha_resource_get -O RESOURCE_DEPENDENCIES -R lh-billapp-rs
DEP=
+ [ != ]
+ echo \t\t"lh-billapp-rs";
+ 1>> /tmp/clu-dom3-resources.dot
+ + tr -s \n
+ scha_resource_get -O RESOURCE_DEPENDENCIES_WEAK -R lh-billapp-rs
DEP_WEAK=

Datagrid change row event with tab AND/OR click ???

I have a spark datagrid with the last two columns enterable.
The natural approach for the user is to click in one and enter it then keep tabbing from cell to cell row to row to do his/her data entry.
Selectionchanging works only if you click, the selection does not keep up with the tab from row to row.
I want to enter the new data for each row when the user leaves the row.
What is the best way to approach this particular (and common) need.
Thanks
Dan Pride

Hi again,
I think I was not clear enough. Basically I have a textfield assigned with a style, let's say TextFieldStyle1. What I want is to programmatically assign the textfield another style, say, TextFieldStyle2.
How can I achieve that ?
Many thanks !

Check table with Plant and material type

xperts,
i m trying to find a check table with fields werks and mtart.

Hi,
NO ,its not possible to get from only one table...
werks -
T001W
mtart----
t134.
Regards,
Rohan.

Business event with resources and resource type

Similar Messages

Maybe you are looking for