Business Explorer 7.1 With Windows Server 2000?

Hi
We are looking to upgrade our SAP GUI from 620 to 710. As part of this due to other system install and upgrades we are looking to upgrade the Business Explorer from the included 3.5 to 7.1.
My issue/question is this......I am reading conflicting information, of sorts, in that in the prerequisites it states that Business Explorer 7.1 is only compatible with Windows XP or Vista. However in the installation guide for Business Explorer 7.1 in Chapter 5 it says "The user with which you are logged in to your workstation (Windows 2000, Windows XP or Windows Vista)"
To add to the confusion we access the SAP GUI, and in turn the business explorer, via Citrix and so there is no SAP software installed locally on the users desktops.
So in case I haven't yet asked the question, Is it possible to have Business Explorer 7.1 working on Windows 2000 Server? And if so is it straightforward or are there workarounds required?
Thanks in advance
Ian Newbury

We have installed the BEx Analyser version 7.1 and it works so the answer to my question is Yes.

Similar Messages

P2v problem with windows server 2000

Hello all!
I have a problem: I try to convert physical windows 2000 advanced server with sp4. I use SCVMM2008 installed on windows server 2008 x64.
When I press "Scan System", I have an error:
Agent installation failed on 10.13.5.1.
Try the operation again. If the problem persists, install the agent locally and then add the managed computer.
ID: 410
Details: Fatal error during installation (0x80070643)
and on the physical server I see, that agents is installed, but cannot start with "The Virtual Maschine Manager Agent service terminated with service-specific error 2147942421".
please help!Anton

Thanks.
Can you please collect the traces as described in this link --
http://blogs.technet.com/chengw/archive/2008/05/08/how-to-collect-scvmm-traces.aspx
Once you have the traces, please file a bug through the connect website. See the sticky instructions post in the general forum on how to do this.
-- ChetanG
-- This posting is provided "AS IS" with no warranties, and confers no rights. User assumes all.

I've just moved from PC to Mac, with my PC i and using Vmware Player I used to work on 2 Virtual M/C both on 2 external drives, one Windows Server 2000 as operating system and the sec. WindowsXP, is their a way to open these m/c on my mac

I've just moved from PC to Mac, with my PC i and using Vmware Player I used to work on 2 Virtual M/C both on 2 external drives, one Windows Server 2000 as operating system and the sec. WindowsXP, is their a way to open these m/c on my mac

I am so glad to hear about your success. As you are new to the Mac environment, I will be glad to help you more.
You said: "I can't change the setup yet but i have access". I don't understand what you mean about changing the setup! Please let me know more about that.
I also recommend to use Boot Camp, which allows you to install windows on a partition of your internal hard drive. This has many benefits. First, you can restart your computer and start up in windows. This makes your Mac device a complete windows machine and you gain the most from your hardware when working in Windows. Second, if a problem occures to your Mac OS X, you can restart your machine in Windows and prevent your data from getting lost. Third, you can import the Windows installed on the boot camp partition in to the Mac OS X using VMWare Fusion and work with it as a virtual machine. In this situation, VMWare enables you to work directly with your Windows in the boot camp partition. So it does not create a file package for the virtual machine in OS X.
Regarding the data safety and reliablity, I strongly recommend using Time Machine. You can also set it up to back up your virtual machines or not. This is possible to set up in the Virtual Machine Preferences Page in VMWare Fusion, or in the Time Machine preferences page in the System Preferences app of OS X.
Please don't hesitate to ask any other question. I will be glad to help you.

Want to know if Internet Explorer 10 and 11 are they compatible with Windows Server 2008 32 bit?

Want to know if Internet Explorer 10 and 11 are they compatible with Windows Server 2008 32 bit?

Compare & contrast:
Internet Explorer 11 system requirements
http://windows.microsoft.com/en-us/internet-explorer/ie-system-requirements#ie=ie-11-win-7
Internet Explorer 10 system requirements
http://windows.microsoft.com/en-us/internet-explorer/ie-system-requirements#ie=ie-10-win-7
Internet Explorer 9 system requirements
http://windows.microsoft.com/en-us/internet-explorer/ie-system-requirements#ie=ie-9
Neither IE11 nor IE10 is supported in Vista either.
~Robear Dyer (PA Bear) MS MVP-Windows Client since 2002 Disclaimer: MS MVPs neither represent nor work for Microsoft

Is J2EE compatible with Windows server 2003?

Is J2EE compatible with Windows server 2003? Whenever I try to install it says its not compatible, and the sun site only mention XP and 2000 Advanced Server.
Does anyone use J2EE on win2k3server? Which version do you use?

Which J2EE version are you trying to install and where did you download it from? J2EE 1.4 SDK should install and run on Windows 2003. At what point in installation exactly are you getting this message?

OS X 10.5.6 versus Windows Server 2000 SFM

We have recently deployed a number of Macintosh (Mac Pros and iMacs) running OS X 10.5.6. When copying a directory to a Windows Server 2000 running Services for Macintosh, the directory permission are not duplicated and, more problematically, cannot be modified on the server from the Mac.
This was not a problem with the Macintoshes running OS X 10.4. Did something change between versions? Anyone know a solution?
Note: we are replacing the Windows server with an XServe, but I'm looking for a quick fix before that migration.

We have recently deployed a number of Macintosh (Mac Pros and iMacs) running OS X 10.5.6. When copying a directory to a Windows Server 2000 running Services for Macintosh, the directory permission are not duplicated and, more problematically, cannot be modified on the server from the Mac.
This was not a problem with the Macintoshes running OS X 10.4. Did something change between versions? Anyone know a solution?
Note: we are replacing the Windows server with an XServe, but I'm looking for a quick fix before that migration.

How to setup NWDI environment in the Windows Server 2000?

Hi,
I need to setup NWDI environment in the Windows Server 2000. I have NWDS and SAP R/3 6.0 installed along with SAP EP 7.0.
Please provide me with enough details to do so.
from where i need to download NWDI software?
Thanks & Regards,
Sathya

Hi ,
recommend you to install it in new hardware as nwdi uses hardware resources efficiently.
You have to install a NWDI (NetWeaver Development Infrastructure -or- Usage Type "DI") with netweaver installer .otherwise you can deploy below sca files from sdm after downloading them from service market place
___DICBS*_.SCA |DI COMPONENT BUILD SERVER 7.00
___DICMS*_.SCA |DI CHANGE MGMT SERVER 7.00
___DIDTR*_.SCA |DI DESIGN TIME REPOSITORY 7.00
check sap note Note 883948
for post installation steps,you can search sdn.eeasily you can found blogs.
Regards,
Koti Reddy

Oracle 8i compatible with Windows Server 2008?

Does anyone know whether Oracle 8i can be run on Windows Server 2008? My organization has only a license for Oracle 8i and we're buying new servers coming with Windows Server 2008.
Thank you, Chaiyong

There is no such thing as a licence for "Oracle 8i" there is only a licence for Oracle. Do you mean that you're out of support ?
In any event 8i is desupported.
Best bet is to install P2V a VMware Windows 2000 and leave it at that.

Order of upgarde Oracle 9.0.1.3 to 11g and Windows server 2000 to 2008

Hi
I need help with determining which order I should upgrade my system. I need to upgarde both oracle and os server:
Oracle version 9.0.1.3 to 11g (I know that i will have follow upgrade path as per oracle matrix)
Windows server 2000 - 2008 (I know that i=I need to go to 2003 before 2008)
My question is do I upgrade oracle to 11g first on windows 2000, or upgrade the Windows OS first and then oracle? also what are the implications if any?
Thanks.

Hi;
I need help with determining which order I should upgrade my system. I need to upgarde both oracle and os server:
Oracle version 9.0.1.3 to 11g (I know that i will have follow upgrade path as per oracle matrix)You need to be 9.2.0.8 level to make 11gr2 direct upgrade
My question is do I upgrade oracle to 11g first on windows 2000, or upgrade the Windows OS first and then oracle? also what are the implications if any?I suggest see below notes:
Minimizing Downtime During Production Upgrade [ID 478308.1]
Master Note For Oracle Database Upgrades and Migrations [ID 1152016.1]
Different Upgrade Methods For Upgrading Your Database [ID 419550.1]
Also Please check my blog
http://heliosguneserol.wordpress.com/2010/06/17/move-to-oracle-database-11g-release-2-wiht-mike-dietrich/
In this pdf you can see patch of to upgrade db from x to n wiht many senerios wiht all related metalinks notes which is created by Oracle worker Mike Dietrich
Regard
Helios

Oracle Database 11g-R2 with Windows Server 2008

Hi to All Respected Gurus!
Recently I have downloaded Oracle Database 11g-R2.
Will it work with Windows Server 2008-R2?
Please guid eme.
Thanks in Advance.
Muhammad Uzair
Oracle Application Developer
Oracle APEX Developer
Pakistan
+92 (333) 7058754

uzairmalik wrote:
Hi to All Respected Gurus!
Recently I have downloaded Oracle Database 11g-R2.
Will it work with Windows Server 2008-R2?
Please guid eme.
Did you look in the installation guide for the software requirement for 11.2? You could had easily found the answer from there by yourself.
http://docs.oracle.com/cd/E11882_01/install.112/e24186/reqs.htm#CHDHGGFE
From the above link,
>
Requirement Value
Operating System
Oracle Database for 32-bit Windows is supported on the following operating systems:
Windows Server 2003 - all editions
Windows Server 2003 R2 - all editions
Windows XP Professional
Windows Vista - Business, Enterprise, and Ultimate editions
Windows Server 2008 - Standard, Enterprise, Datacenter, Web, and Foundation editions. The Server Core option is not supported.
Note: Check My Oracle Support (formerly OracleMetaLink) for more information about Hyper-V support.
Windows 7 - Professional, Enterprise, and Ultimate editions
Windows Multilingual User Interface Pack is supported.
>
Aman....

Crystal Reports 10 Compatibility with Windows Server 2008 R2

Hello I'm a developer and I'm in the process of migrating my ASP.NET application that uses crystal reports 10 from a win2k3 server to a win2k8 R2 server.
First of all, is CR 10 compatible with windows server 2008 R2?
The application is up and running on the new server, the only thing that fails is the reports. I get the following error message:
Error in file ....c:\windows\temp\{TEMP_FILE_NAME}.rtp
Failed to create the Crystal Query Engine.
This occurs at report.load(..)
I did already grant NETWORK SERVICE access to Temp and ran the CR redistribute msi that came with Visual Studio 2008 - CRRedist2008_x64.msi.
Please help

YESSSS!!!! IT WORKS!!
Finally, after days of installing, uninstalling, setting permissions, crawling through process monitor output.. I finally have it working.
For anyone with the same problem, here's what worked for me:
I had to use the 32-bit runtime
set application pool to 32-bit
grant the following permissions based on the different errors listed below:
Error in File UNKNOWN.RPT
- Give NETWORK SERVICE list permission on C: Drive, run a report, then remove NETWORK SERVICE from the list (weird, but works, and I had to do this every single time I setup Crystal Reports on a new computer so far).
- You might also have to set correct permission on 'Temp' if u get still get this error.
Error in file ....c:\windows\temp.rtp
Failed to create the Crystal Query Engine
- Grant correct permission to C:\Program Files (x86)\Business Objects (your path may vary)
(For me it was giving Users Modify permission to Business Objects folder)
Unknown Query Engine ErrorError in File C:\Windows\TEMP\.rpt:
Unknown Query Engine Error
- Switch application pool to 32-bit.
- Make sure Crystal Reports Runtime is 32-bit (CRRedist2008_x86.msi)
Thank you guys so much for all your help and sticking through this with me.

1. Will CAL Licenses works if i use Windows Server 2012? 2. What GB of RAM can be used with Windows Server 2008 Standard Edition?

I have been using Windows Server 2008 Standard Edition for my business purpose and there are at-least 30 Users who logged in into the server Via Remotely from different location. I want to upgrade my server with latest one with some extra cores and RAM for
better and smooth operations for all users. So, i have a doubt whether my CAL Licenses will works with Windows Server 2012 or i need to purchase the new one for the same?
Moreover, if i don't upgrade my Windows to any 2012 edition and stay on 2008 Standard Edition how much maximum RAM can be installed at a time? is there any limitations? if Yes, please let me know how do i upgrade my Windows 2008 Standard Edition to any other
business edition to avoid such limitations of RAM?
Waiting for your favorable and quick response.

Hi again,
th eupgrade optiuon from Standard 2008 to Enterprise 2008 was only available for customers with open value contract with activ esoftware assurance then they can purchase the step up license from Standard to Enterprise.
the only way to have the Enterprise 2008 Edition is to make th edowngrad efrom 2012 Standard to 2008 Enterprise. it means that if you purchase the 2012 R2 Standard Edition, you may downgarde to Enterprise 2008/2008 R2. th ebest way to make the downgrade
to 2008 R2 Enterprise is to purchase the current Version 2012 R2 Standard in volume licensing than you can download diretly from VLSC the Enterprise Edition.
with your downgrade you can still using the 2008 CALs.
thanks
diramoh

Error Establishing Socket with SQL Server 2000

I have a java application that uses JDBC to connect to a source of data.
The application has been installed on many platforms using many different data sources, but one combination has beaten me.
I am using Windows Server 2003 and SQL Server 2000 Enterprise, when the application starts up it fails to connect to the database with the following message:
[Microsoft][SQL Server 2000 Driver for JDBC] Error Establishing Socket
I have looked at a lot of forums and tried many things but nothing has fixed the problem for me:
To summarise:
The URL I am using is jdbc:microsoft:sqlserver://locahost:1433
I have also tried using the name of the machine and it's actual IP address
I have checked that TCP/IP is enabled and using the correct port (1433)
Both SQL Server and Windows authentication are enabled and I can connect using both method from ODBC
I can connect to it and use it with c#.net, vb.net and ODBC from the same machine
I have installed the latest SQL Server 2000 service pack
The application works with SQL Server 2000 Developer on Windows XP
If anyone has any other suggestions, I would love to hear from you.

If you printed out the SQL state and error code that would be a bit more info:
catch (SQLException e)
    e.printStackTrace();
    System.err.println("SQL state: " + e.getSQLState());
    System.err.println("SQL error: " + e.getErrorCode());
}Maybe that will give you more detail as to exactly why this is happening.
The only other thought I had was security. Maybe there's a permission to access the port that would have to be granted explicitly as part of M$'s new emphasis on security. You did say it was Windoze Server 2003. Maybe that's the difference between all the other installs and this one.
No joy from me, sorry. - MOD

OSX and Windows Server 2000 resource forks

Our shop is 95% OSX with a Windows Server 2000 server. There is one application that is sensitive to image file resource forks copied to the server. When the app does a particular operation if there are resource forks in the folder the operation fails.
Is there a way to either strip the forks on the copy operation? Or is there a way to block them in Windows Server?
BTW, the application is a dedicated print server RIP linked to a Durst photographic printer running on Windows XP.
G5 Mac OS X (10.4.6) Windows Server 2000
G5 Mac OS X (10.4.6) Windows Server 2000
G5 Mac OS X (10.4.6) Windows Server 2000

I feel your pain. I have been dealing with the same thing and found the following options:
Try turning on "Services for Macintosh" or SFM on the windows server. I am NOT a windows guy I have had mixed results when my LAN folks have done this for me. In some instances the ._rsrc files don't appear, and this won't fix long name issues if you are having them.
Another way to go w/o touching the windows server...third party.
Path Finder 4: http://www.cocoatech.com/pf4
Blue Harvest: http://zeroonetwenty.com/blueharvest/#faq
KopyMac 2.6.1b: http://www.tcsn.net/mont/index2.html
I have not tried the third party solution yet. I am still convinced there must be some way to have the mac just stop creating the files, but so far I have nothing. The only article apple has that is remotley related addresses .DS_Store files and NOT the ._rsrc files. I tries the edit to com.apple.desktopservices.plist and I still had a server full of ._bsfile.
Hope this helps, and if anyone out there has the 100% mac solution PLEASE share.
PowerBook G4 Mac OS X (10.4.6)

Licensing issue with Windows Server 2012 R2 Essential

Hi,
we purchased a server that came with Windows Server 2012 Essentials. and we found out some of the issue regarding the licensing. I would like to verify it with the experts here.
1. This Essential O.S. cannot be deployed as a member server in the domain, only Windows server 2012 r2 Standard and data center is capable as deploy as a member server?
2. does it work with a single domain with multiple domain controllers and one primary domain controller? Example, 10 offices in different states, each location has a domain controller in their office, I'm installing to install this Essential server as another
domain controller in one of the offices for redundancy purpose. I promoted this server into domain controller with success, but it gives me an fsmo error everyday, and warning about shutting down if i don't transfer the fsmo role to this server.
3. which leads to this question, so this Essential OS can only be deploy as a single domain as the primary domain controller? Up to 25 user and 50 device license?
4. Is it possible to deploy it as a domain controller (that office has less than 25 users) in that office while syncing correctly with the other 10 domain controllers in other offices, they are all in the same single domain? I can't make this work, and I
think due to the Essential O.S.'s limitation.
5. we use a vpn connection to connect all the office together, and all the domain controller uses lan ip address to communicate with each other.
Thank you for the help in advance. I have been researching for the past couple days, but I still couldn't get a clear answer. Thank you again.

Hi Cliff,
Thank you for your reply.
1. We will get a new server 2012 r2 standard to deploy as member server.
2 and 3. Only ONE domain controller can hold all FSMO roles in a single domain, correct? Currently an windows 2003 enterprise, this is our first server in our domain, it holds all the FSMO roles currently.
4. Yes, we realized essentials will not work for us, so we are switching to 2012 r2 standard to deploy for the new
domain controller for our new office, still under the same domain.
5. This wasn't a question, just wanted to give out the connection information.
The problem was that We didn't read the Essentials in detail when buying the new server, on dell website, it said it was perfect for small business, we didn't know it has to run as a primary DC. it was great in price, and it doesn't need CALs.
but we quickly realized after deploying it as a DC, it gives us error about Server Licensing compliance, and will shut down automatically. Then we were going to use it as a member server to run application, and realized we couldn't. So we are returning the
server, and getting a new one with standard r2 2012 and CALs license.
It was a costly mistake.
Thank you again.

Business Explorer 7.1 With Windows Server 2000?

Similar Messages

Maybe you are looking for