Business Function "Reporting Financials" is not switched on

in rsa3 i am extracting data for 0co_pc_10 getting below error
Business Function "Reporting Financials" is not switched on
Message no. SREP_FIN001
Diagnosis
You tried to access functionality, which is provided by Business Function "Reporting Financials". However, the Business Function "Reporting Financials" is not switched on.
System Response
Error message
Procedure
Check if the Business Function "Reporting Financials" shall be used. In this case activate the Business Function.

Check below thread
Business Function "Reporting Financials" is not switched on

Similar Messages

Help on Business Function "Reporting Financials 2" and its impact

Hi All,
I am looking at 'SAP Help' for Reporting Financials 2 (EhP4).
http://help.sap.com/erp2005_ehp_04/helpdata/EN/6a/cd7dbd74694af3ac13b3c24a10def4/frameset.htm
basically I want to use the standard extractor 0FI_AA_20 FI-AA: Transactions and Depreciation . when i try to run the extractor i get an error saying: Business Function "Reporting Financials 2" is not switched on
In order to use the new data sources the pre requisites are:
1. SAP Enhancement Package 4 for SAP ERP 6.0
2. Activated the Reporting Financials 2 business function.
The EnP4 is already implemented what i have do next is to activate the business function.
Can any one help me with more details on what all gets activated with this business function 'Reporting Financials 2' and its impact.
With Best Regards
Shilpa.

Hi,
in SFW5 you can get an overview over the business functions. There you could activate the appropriate Business Function.
But I would recommend you strongly before to read some information and documentation about business functions and the enhancement package concept.
Regards,
Markus

Questions regarding new functionalities in EhP 4 - Reporting Financials 2

Dear Forum,
in a project we would like to use some new functionalities from Reporting Financials 2 - ie. Datasource 0FI_AA_20 for Depreciation and Amortization loading to BI for following years as this can not be done by old extractor.
We are know looking for reliable information about impact and changes that are made in ERP if we switch on the functionality Reporting Financials 2 via SFW5? Will old extracors work nevertheless? Will all reports in ERP work without problems? Is there any impact on business processes? Or is this just additional functionality which will not affect current implementation?
Can anybody give information about this?
Thanks, regards
Lars
Edited by: Lars Hermanns on Jun 2, 2010 10:29 AM
Edited by: Lars Hermanns on Jun 2, 2010 10:29 AM

Marc,
Some additional questions regarding locking.
I encounter that the dataset that is locked depends on the restrictions made in the 'Characteristic Restrictions'-part of the query.
Restrictions in the 'Default Values'-part are not taken into account. In that case all data records of the characteristic are locked.
Q1: Is that correct?
To give an example: Assume you restrict customer on hierarchy node in Default Values. If you want people to plan concurrently this is not possible since all customers are locked then. When customer restriction is moved to Char Restr the system only locks the specific cutomer hier node and people can plan concurrently.
Q2: What about variables use in restricted keyfigures like variable for fy/period? Is only this fy/period locked then?
Q3: We'd like to lock on a navigational attribute. The nav attr is put as a variable in the filter of the Characteristic Restrictions. Does the system then only lock this selection for the nav.attr? Or do I have to change my locking settings in RSPLSE?
Then question regarding locking of data for functions:
Assume you use the BEx Analyzer and use the query as data_provider_filter for your planning function. You use restricted keyfigures with char Version. First column contains amount for version 1 and second column contains amount for version 2.
In the Char Restrictions you've restricted version to values '1' and '2'.
When executing the inputready query version 1 and 2 are locked. (due to the selection in Char Restr)
But when executing the planning function all versions are locked (*)
Q4: True?
Kind regards, Harjan

0FIGL_V40 reporting financials not switched on

Hi Gurus,
I have installed the cube 0figl_v40 virtual cube and when i am tring to load the data or generate a report ,i am facing a error saying reorting finacials not switched on.can someone provide me the necessary setting for this info provider and advantages or disadvantages using this cube.
Thanks
Sridhar

Hi,
Check in
0FIGL_V40
http://help.sap.com/saphelp_nw70/helpdata/EN/ba/12122a0a024aef890f14d7ee875d76/frameset.htm
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/6044496a-e2a8-2b10-4192-ecd229cbe682
help.sap.com/bp_biv370/documentation/BW/I80_Scen_InstallGuide_EN_DE.doc
Thanks
Reddy

What is business function switch?

Hi,
Can anyone tell me what business function switches are? And also how they are to be checked in the
program (as to whether a business function is switched on or not)? Thanks.
Regards,
Suhas

Hi,
Here are the links which give wealthy info on Enhancement Frame Work(SWITCH).
/people/thomas.weiss/blog/2006/01/24/what-the-new-enhancement-framework-is-for-150-its-basic-structure-and-elements-for-beginners
/people/thomas.weiss/blog/2006/03/15/the-new-enhancement-framework-part-2--what-else-you-need-to-know-before-building-an-enhancement
/people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-series
/people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework
/people/thomas.weiss/blog/2006/05/03/source-code-enhancements--part-5-of-the-series-on-the-new-enhancement-framework
/people/thomas.weiss/blog/2007/12/12/the-three-use-cases-of-the-enhancement-and-switch-framework--part-1
/people/thomas.weiss/blog/2008/01/07/the-three-use-cases-of-the-enhancement-and-switch-framework--part-2
/people/thomas.weiss/blog/2008/01/14/the-three-use-cases-of-the-enhancement-and-switch-framework--part-3
/people/thomas.weiss/blog/2008/01/23/the-three-use-cases-of-the-enhancement-and-switch-framework--part-4-the-many-ways-to-enhance-a-sap-application-with-the-new-framework
/people/thomas.weiss/blog/2008/02/04/the-three-use-cases-of-the-enhancement-and-switch-framework--part-5-the-basics-about-switching
Creating Switch.
1. in SFW1, Once you create your SWITCH and assign your package and Activate it, it shows in Active mode but the SWITCH is not still Active GLOBALLY.
2. To activate it, create a Bussiness Function in SFW2 and assign your SWITCH to this and Activate it.
2.1 Here if you select the Business Function as type ' INDUSTRY ', then again you need to assign this Business Function to Business Function Set in SFW3.
2.1.1 In SFW3, Create a Business Funstion Set, and assign this Business Function to it and Activate it. But your SWICT is still it not active Globally.
2.1.2 Go to SFW5, and Activate your Business Function Set here, then your SWICT is GLOBALLY ACTIVE
2.2 If your Business Function is of type ' Add On ', then there is no need to assign it to any Business Function Set.
2.2.1 Directly, go to SFW5, click on type ' Add Ons ', and after identifing your Business Function, Activate your Business Function here, then your SWITCH is GLOBALLY ACTIVE.
But the final problem is : Once you activate your SWITCH, there is no other way to deactivate your SWICTH.
Enhancement implementations are switchable.
Steps to assign a switch to BADI Implementation:
1) Assign the Enhancement Implementation containing the BADI implementation to a Package/development class.
2)Assign this Package/development class to a switch in transaction SFW1.
3)Make sure the switch you are using has state ON. For this assign this switch to an ACTIVE business function using transaction SFW2. A switch inherits the state of the business function.
Reward Points if answer is useful.
Regards,
Raj.

Switching on HCM business functions with EHP4

Hello
We have installed EHP4. When trying to activate business functions for talent management using the img, we get a message "no activation necessary".
Does anyone know why this is so and how it can be fixed
Thanks

Thanks Sergio. Can you tell me where the planned column should be located? Is this the same as planned status?
When I open this configuration task, I have a planned status but no planned column.
I have the following
Business Function Set is blank
Under Enterprise Extensions, business function EA-HR is activated and release is showing 600
Under enterprise business functions, the function I am trying to switch on is HCM_TMC_CI_1 (it shows release 604).
The columns I see are: Name; Description; Planned status; Dependencies; Documentation; Release info; Release; SAP Test Catalog; Test Catalog and Activated On
Is it possible that the basis team did not install ehp4 properly?
When I look at system status in the test system it shows the followign for basis and hr
basis 701
ea-hr 604
thanks

I have a site I do business with. They do not authorize passwords unless a dealer. I do no have on an auto save function, as I want to type my passwords in ea

I have a site I do business with. They do not authorize passwords unless you are a dealer. I do not have passwords on an auto save function, as I want to type my passwords in each time for security. My password for this site will only work a short WHILE, AND THEN it will not be recognized by the site and I cannot get in.
Then I must contact the company to reset or clear it manually on their end so it can be reset. They always give me the SAME SETUP PASSWORD to use. I use it, then I RESET PASSWORD on my end. The computer seems to remember my user NAME AT least on my computer as it comes up once I start typing the username in. They SAY IT is a settings issue on my end. I do not have this problem on any other site even THOSE WITH higher SECURITY. I need to FIX the issue OR may LOSE ACCESS To the site as is very aggravating for them and they say other have had the problem but usually with chrome but never constantly.I am not that computer literate ,but my husband is an IT Security professor and textbook writer but says doesn't really know Firefox. I do not really want to store passwords on computer as have been hacked several times. He and I do not understand some of the terms mentioned. since it is not a problem with other sites it should be fixable. Please me help using terms I or my husband can understand without having to give Firefox all my passwords. I would be happy to set up something different just for this one site if I need to but need easy instructions. Have cleared the cookies before but it still happens. What setting do I need to change or set to fix this? the other questions that come up seem very different and do not apply. FF 22 now but happened w other FF versions.

I'm having a little trouble understanding the part about your password having to be reset. Why is that happening??
Let's start with Firefox's settings:
(1) You can configure the password manager feature on this tab:
orange Firefox button (or Tools menu) > Options > Security
There is a checkbox to enable/disable the feature.
There also is a "Saved Passwords" button to review and remove any passwords you do not want Firefox to keep.
That tab also has a feature to set a Master Password so that no one can use your saved passwords without knowing the Master Password. You may need to exit Firefox in order for Firefox to ask for that again.
Related articles:
* [[Password manager - Remember, delete and change saved passwords in Firefox]]
* [[Use a Master Password to protect stored logins and passwords]]
(2) Site-specific permissions
If you want to use the password manager for other sites but NOT a particular site, you can configure that in the Permissions Manager.
In a new tab, type or paste '''about:permissions''' in the address bar and press Enter.
After the page loads, use the search box in the upper left corner to narrow down the list to the site you want to configure. Highlight the site on the left side, and on the right side, choose Block under Store Passwords.
(3) Form autocomplete suggestions
Separate from passwords, Firefox remembers entries you've made into forms (in most cases) and lists the matching ones below the form field in a drop-down.
To clear a suggestion, press the down arrow key to highlight it and press the Delete key.
To turn off this feature, see this article: [[Control whether Firefox automatically fills in forms with your information]].
To review and selectively edit or delete form history entries, you need an add-on. For example, you could try this one: https://addons.mozilla.org/firefox/addon/form-history-control/

Business Functions of type Validation/Constraint not used when defined in the Glossary

Hi,
the problem is the following: in the Glossary, we have some Business Rules defined. They are of type Validation or Constraint and shall be used to validate the data in the system. These Business Rules are used in Domains in a CDM model.
From that CDM model we are generating a PDM model (for HANA, but it's not working for any of the databases available for selection). Now: I would expect, as this has been defined in the CDM, the Business Rules replicated in the PDM model and used as constraints.
This is unfortunately working only for Business Functions, which are directly defined in the CDM model, not for those ones, defined in the Glossary and reused in the CDM model.
Working case:
- define Business Rule in CDM
- define Domain in CDM and assign Business Rule
- assign the domain to a attribute
- generate PDM from the CDM model
- the Business Rule is replicated in the PDM model, the check constraint for the table is generated correctly
NOT working case:
- define Business Rule in Glossary
- define Domain in CDM and assign the Business Rule from the Glossary
- assign the domain to a attribute
- generate PDM from the CDM model
- the Business Rule is NOT replicated in the PDM model, the check constraint for the table is MISSING
Do you think it's a bug, or am I doing something wrong?
P.S.
We are on 16.5 SP05
Thanks,
Rafal

Looks like a bug to me; I would expect the source of the rule to be irrelevant, assuming the PDM has access to the relevant metadata at the time of generation. Perhaps Glossary shortcuts don't have access to all the metadata?

Business Functions Switch to activate Enhancement Package 4

Hi SAP experts,
can you help me?...
We will implement SAP CRM 7.0 with scenario of creation ERP Quations & ERP Sales Orders, therefore we have installed Enhancement Package 4 in our ERP, but I've been looking for information to know which Business Functions (switch) we need to activate for this scenario, but in all documentation I've been looking doesn't indicate this.
Can you let me know wich switches we need to activate or share documentation about this?
Your help is most highly appretiated.
Regards
Gonzalo C.

> We will implement SAP CRM 7.0 with scenario of creation ERP Quations & ERP Sales Orders, therefore we have installed Enhancement Package 4 in our ERP,
So there was any business reason to install EHP4? Who told you? And those people should also be able to tell you what to activate
I'd go through SFW5 and click the "documentation" button next to the functions, this will open a browser window explaining what this function is about.
Markus

Report printer was not valid, switching to default printer.

We are using a Crystal Report viewer in Tomcat. Everything works but sometimes in the Tomcat log we get the following error:
ERROR com.crystaldecisions.reports.reportdefinition.ReportDefinition - Report printer was not valid, switching to default printer.
Is there a way to stop this error from being reported? If not, is it safe to ignore since everything appears to be working fine?

Generally safe to ignore, unless of course you want to print to that printer
Just means report was designed connected to specific printer which is not available where you are now publishing report. YOu could try going into printer set up and selecting No Printer.
Ian

SFW5 in IDES: business function set not selectable

I intended to activate some IS solution using SFW5. My system is IDES 6.0 SR2 and client is 800.
However, inside SFW5, I could not select other business function set to activate like in other production system.
Please tell me why and how to do.
Giang

Hi Giang
IDES solution for ERP 6.0 is preactivated is FI-CAX component and you cannot activate any other IS functionality if FI-CAX is activated. Please refer SAP note 1013391 for ERP 6.0 SR2.
If you want a particular IS to be activated, SAP has release IDES for specific IS solutions. Following IDES solutions are avialable as of now:
IDES DI/MILL PRODUCTS 2009
IDES EA-DFPS 6.03
IDES IS-CWM 6.03
IDES IS-PS-CA 600
IDES OIL-600
IDES RETAIL-600
IDES SAP AFS 6.0
IDES SEM-BW 6.0/7.00
Check if it does have your required component. Hope this helps you.
Regards
Rahul

SFW5: business function set not selectable

I would like to activate PSCD.
However, even in change mode, I could not select public sector business function set to activate.
The system only display Contract AR + AP in one tab, and Enterprise Add-on on another tab.
Giang

Hi Truong Giang,
Try the following steps to activate PSCD and see whether it works out or not. I believe that you are using ECC 6.0 because till ECC 5.0 this SFW5 TCOde is not available.
1. Execute the TCode - SFW5
2. Select the Menu path Environment -> Business Function
3. Under Business Function Column select either PSCD / PSCD_GRANTOR / PSCD_SETTINGS / PSCD_TRM according to your requirement
4. Select Activate present on the Application toolbar or Press Ctrl+F3 or follow the menu path Business Function -> Activate
Hope this solves your problem. Reward accordingly.
Thanks and Regards,
Maddineni Bharath.

Express Entry Sheet Ehp 5 & Business Function Switch FIN_TRAVEL_3 (ASAP)

Hi,
I'm looking for experiences with Express Travel Entry Sheet, has anybody implemented this business functionality on Portal. If you could please share your experiences with regards to what additional configuration is required to enable this functionality specially trip breaks and deductions.
User experience for both frequent and in-frequent traveler, domestic and international trips, and access to receipts stored in content server from portals and during workflow approvals.
Thanks!!!
Salman

FSKB G/L Account Posting
this transaction is not working

SSRS Report Manager does not open on Vista Business Edition machine - Server Error in '/Reports' Application

Hi
Thank you for your support.
I have a Vista laptop that cannot connect to Report Manager URL. Same Windows account on an XP machine works just fine.
Note: - Reporting Services is not installed on Vista machine , this is a client that connects to a SQL Server 2008 R2 and Reporting server instance.
On Vista workstation, I tried diabling UAC, tried Run As, added trusted sites, other browsers, IP/FQDN/name changes in URL. - no change.
Server Error in '/Reports' Application
Some or all identity references could not be translated.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Security.Principal.IdentityNotMappedException: Some or all identity references could not be translated.
[IdentityNotMappedException: Some or all identity references could not be translated.]
System.Security.Principal.SecurityIdentifier.Translate(IdentityReferenceCollection sourceSids, Type targetType, Boolean forceSuccess)
System.Security.Principal.SecurityIdentifier.Translate(Type targetType)
System.Security.Principal.WindowsIdentity.GetName()
System.Security.Principal.WindowsIdentity.get_Name()
Microsoft.ReportingServices.UI.GlobalApp.Application_AuthenticateRequest(Object sender, EventArgs e)
System.Web.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
Macca

Hi Macca,
Per my understanding that you got the error message when access the report manager in the client vista machine which have't install the reporting services instance and access to the Windows XP machine works fine, right?
I assumed that you have installed the Reporting Services instance in this WIndows XP machine, Could you please check in the third machine with the vista os to see if you will got the same error message.
The issue can be caused by many factors:
If the third machine can connect to the report manager remotely, the issue can be caused by this vista machine.
Similar thread for your reference:
http://www.windows-tech.info/15/69e51d5566a67ef2.php
https://technet.microsoft.com/en-us/library/bb630430(v=sql.105).aspx
If the other machine also can't access the report manager, the issue caused by some configuration not correct for the remote connection(https://msdn.microsoft.com/en-us/library/ms156305.aspx)
If you are using Windows Vista or Windows Server 2008, you must configure Report Manager for local administration, please check to make sure the "Service Account" is the domain/user account which exists in the local administrator group.
Please check the rsreportserver.config file and make sure <RSWindowsNegotiate/> is the first value in <AuthenticationTypes> section. By default, the rsreportserver.config file is located in the path like: C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting
Services\ReportServer
Similar thread for your reference:
Reporting Services 2008 Web Service URL - Access Denied error
http://www.sqlservercentral.com/Forums/Topic697167-146-1.aspx
If your problem, still exists, please try to provide more details information in the log file which path is: C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\LogFiles
Any problem, please feel free to ask.
Regards
Vicky Liu
Vicky Liu
TechNet Community Support

EHP4 - Business Function - FIN_REP_SIMPL_2

Hi,
I´m in Petrobras and I have a doubt about the reports generated after the activations of the business function FIN_REP_SIMPL_2 - Reporting Financials 2.
I Would like to now where I can or I will look the reports? What ne next steps that I heve to do to have, to see the reports on the portal and the address of the portal?
I´m looking for a documentation about the activation of these business function X Portal (acess) on SAP´s site, but I have not success, can you help me?
Thanks In advance,
Best regards,

Hi Egberto,
You can find the business function document, containing links to information on the individual reports, here: http://help.sap.com/erp2005_ehp_04/helpdata/en/6a/cd7dbd74694af3ac13b3c24a10def4/content.htm
Best regards,
John

Business Function "Reporting Financials" is not switched on

Similar Messages

Maybe you are looking for