Business Function Set

Can some one tell where to find or any document, what functionalities are offered under each business fucntion set ..like DIMP_SDUD.

Hi ,
Following link may help you
http://help.sap.com/saphelp_nw70/helpdata/EN/de/899442047b0831e10000000a1550b0/content.htm
Rahul.

Similar Messages

Business Function Set: Enterprise AddOns in Solution Manager

Hello
For testing purposes I want to activate the Enterprise AddOn EA_PLM in transaction SFW5 inside a Solution Manager 4 installation but no Enterprise AddOn is available. Additionally there is only one Business Function Set called "telco reference pack" with two Business Functions. Do I have to set up something before I can active the Enterprise AddOns? I thought PLM is part of the Solution Manager 4 installation.

Hello Marc,
the Solution Manager consists "only" of an CRM-component, the SolMan component itself and the Netweaver 2004s platform. So no PLM (and no Enterprise AddOn) is available. SolMan coves some functionalities of Software Lifecycle Management, but does not include the PLM coding itself. For EA_PLM you need an ERP system.
Best regards, Alexander

SFW5 in IDES: business function set not selectable

I intended to activate some IS solution using SFW5. My system is IDES 6.0 SR2 and client is 800.
However, inside SFW5, I could not select other business function set to activate like in other production system.
Please tell me why and how to do.
Giang

Hi Giang
IDES solution for ERP 6.0 is preactivated is FI-CAX component and you cannot activate any other IS functionality if FI-CAX is activated. Please refer SAP note 1013391 for ERP 6.0 SR2.
If you want a particular IS to be activated, SAP has release IDES for specific IS solutions. Following IDES solutions are avialable as of now:
IDES DI/MILL PRODUCTS 2009
IDES EA-DFPS 6.03
IDES IS-CWM 6.03
IDES IS-PS-CA 600
IDES OIL-600
IDES RETAIL-600
IDES SAP AFS 6.0
IDES SEM-BW 6.0/7.00
Check if it does have your required component. Hope this helps you.
Regards
Rahul

SFW5: business function set not selectable

I would like to activate PSCD.
However, even in change mode, I could not select public sector business function set to activate.
The system only display Contract AR + AP in one tab, and Enterprise Add-on on another tab.
Giang

Hi Truong Giang,
Try the following steps to activate PSCD and see whether it works out or not. I believe that you are using ECC 6.0 because till ECC 5.0 this SFW5 TCOde is not available.
1. Execute the TCode - SFW5
2. Select the Menu path Environment -> Business Function
3. Under Business Function Column select either PSCD / PSCD_GRANTOR / PSCD_SETTINGS / PSCD_TRM according to your requirement
4. Select Activate present on the Application toolbar or Press Ctrl+F3 or follow the menu path Business Function -> Activate
Hope this solves your problem. Reward accordingly.
Thanks and Regards,
Maddineni Bharath.

Active business functions for IS-OIL Downstream

Dear all,
I have system NW701/ECC6, and upgrade EhP4.
Now I want to active business functions for Downstream, in tcode swf5, I select Business functions set OIL&GAS, I found a lot of business functions:
BUSINESS_FUNCTION_BASIS_COM               Business Function Basis (COM)
COMMODITY_MGMT_&_BULK_LOGISTIC       Commodity Management and Bulk Logistics
COMM_MGMT&BULK_LOG_1                         Commodity Management and Bulk Transports
ISR_RETAILSYSTEM                                       Other Enhancements for SAP Retail
LOG_COMMODITY_TRANSPORT_MGMT_4   Commodity Management and Bulk Transports 2
OIL_PRODUCTION                                           Upstream Production Management
OIL_REVENUE_ACCOUNTING                         Upstream Revenue Accounting
REMOTE_LOGISTICS_MANAGEMENT             Remote Logistics Management
Can any one help me, what business functions do I need to active for Downstream ?
Thanks all,
Thanh.

I create customer message ask SAP and these are downstream functions need to active:
1. COMMODITY_MGMT_&_BULK_LOGISTIC (ECC 6.0 )
2. BUSINESS_FUNCTION_BASIS_COM (EhP3)
3. COMM_MGMT&BULK_LOG_1 (EhP3)
4. LOG_COMMODITY_TRANSPORT_MGMT_4 (EhP4)
Thanh.

What is business function switch?

Hi,
Can anyone tell me what business function switches are? And also how they are to be checked in the
program (as to whether a business function is switched on or not)? Thanks.
Regards,
Suhas

Hi,
Here are the links which give wealthy info on Enhancement Frame Work(SWITCH).
/people/thomas.weiss/blog/2006/01/24/what-the-new-enhancement-framework-is-for-150-its-basic-structure-and-elements-for-beginners
/people/thomas.weiss/blog/2006/03/15/the-new-enhancement-framework-part-2--what-else-you-need-to-know-before-building-an-enhancement
/people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-series
/people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework
/people/thomas.weiss/blog/2006/05/03/source-code-enhancements--part-5-of-the-series-on-the-new-enhancement-framework
/people/thomas.weiss/blog/2007/12/12/the-three-use-cases-of-the-enhancement-and-switch-framework--part-1
/people/thomas.weiss/blog/2008/01/07/the-three-use-cases-of-the-enhancement-and-switch-framework--part-2
/people/thomas.weiss/blog/2008/01/14/the-three-use-cases-of-the-enhancement-and-switch-framework--part-3
/people/thomas.weiss/blog/2008/01/23/the-three-use-cases-of-the-enhancement-and-switch-framework--part-4-the-many-ways-to-enhance-a-sap-application-with-the-new-framework
/people/thomas.weiss/blog/2008/02/04/the-three-use-cases-of-the-enhancement-and-switch-framework--part-5-the-basics-about-switching
Creating Switch.
1. in SFW1, Once you create your SWITCH and assign your package and Activate it, it shows in Active mode but the SWITCH is not still Active GLOBALLY.
2. To activate it, create a Bussiness Function in SFW2 and assign your SWITCH to this and Activate it.
2.1 Here if you select the Business Function as type ' INDUSTRY ', then again you need to assign this Business Function to Business Function Set in SFW3.
2.1.1 In SFW3, Create a Business Funstion Set, and assign this Business Function to it and Activate it. But your SWICT is still it not active Globally.
2.1.2 Go to SFW5, and Activate your Business Function Set here, then your SWICT is GLOBALLY ACTIVE
2.2 If your Business Function is of type ' Add On ', then there is no need to assign it to any Business Function Set.
2.2.1 Directly, go to SFW5, click on type ' Add Ons ', and after identifing your Business Function, Activate your Business Function here, then your SWITCH is GLOBALLY ACTIVE.
But the final problem is : Once you activate your SWITCH, there is no other way to deactivate your SWICTH.
Enhancement implementations are switchable.
Steps to assign a switch to BADI Implementation:
1) Assign the Enhancement Implementation containing the BADI implementation to a Package/development class.
2)Assign this Package/development class to a switch in transaction SFW1.
3)Make sure the switch you are using has state ON. For this assign this switch to an ACTIVE business function using transaction SFW2. A switch inherits the state of the business function.
Reward Points if answer is useful.
Regards,
Raj.

Estimating Activation Time of Business Functions in EhP3

Can anyone estimate how long the activation of c.100 Business Functions plus one industry business function set (ECC-DIMP) ought to take when the transport is imported into a new system? This is in ERP 6 with EhP3.
I know some BFs will activate faster than others, but on average? In our QA system this has taken c.12 hours.
Based on Thomas Weiss' weblog series (great stuff there) I understand that (1) all the activated code is compiling for the first time, and (2) all the DDIC table appends are taking place.
So I wonder also if the size of the tables (# records) affect the run-time of the background job SFW_ACTIVATE_SF0X.
P.S. We are on Basis 70018, and may need to investigate SAP Note 1278120 (available in 70019) to get improved logging. I've also seen the answer by Ralf regarding SAP Note 1276225 to fix a bug in 70018 that reactivates business functions (this was in [Terry's thread|SFW5 repeating already activated BF] ) .

You may be try the R3trans parallel option from note
Note 1127194 - R3trans import with parallel processes
I have no in-depth knowledge on how the switch framework does transport but what I can say is that using this options certain phases of the import are running in parallel as opposed to sequentially when only one R3trans is used.
Note: This is not the same as the parallel option in SPAM/SAINT. This options does in-transport parallelization (one transport is imported with several R3trans where possible).
Just a guess, I have not tested that for SFW5.
Markus

Activate business functions

Hi,
Our client is using ECC6.0 version, we have accidentally activated SAP IS OIL &GAS, where previously it used to be SAP retail. Due to this if we execute any transaction it is going to dump with an error that DDIC data inconsistce. Can you please advise me how to deactive these business function and change SAP IS OIL & GAS to SAP retails as business function set.
I really appreciate your prompt response.
Thanks,

Hi,
Once you have activated SAP IS OIL &GAS. You cannot deactivate yourself. Billing starts from the date of activating. You need to put up OSS to SAP. Only the solution you have to contact the SAP AG and deactivate it.
Regards,
Srinivas Muthyala

Switching on HCM business functions with EHP4

Hello
We have installed EHP4. When trying to activate business functions for talent management using the img, we get a message "no activation necessary".
Does anyone know why this is so and how it can be fixed
Thanks

Thanks Sergio. Can you tell me where the planned column should be located? Is this the same as planned status?
When I open this configuration task, I have a planned status but no planned column.
I have the following
Business Function Set is blank
Under Enterprise Extensions, business function EA-HR is activated and release is showing 600
Under enterprise business functions, the function I am trying to switch on is HCM_TMC_CI_1 (it shows release 604).
The columns I see are: Name; Description; Planned status; Dependencies; Documentation; Release info; Release; SAP Test Catalog; Test Catalog and Activated On
Is it possible that the basis team did not install ehp4 properly?
When I look at system status in the test system it shows the followign for basis and hr
basis 701
ea-hr 604
thanks

Add Horizontal Layout in Business Functions

Hi,
I would like to customize the Business Function layout.
The goal is to get something like that:
I'm trying to achieve this by changing the display preferences for Business Function -> Advances -> Customize Content, but for some reason it's not working.
We are running on 16.5 SP03 PL02
This is what I typed in:
I would expect, After the Activity ID, I get a horizontal tab with Frequency and Role associated. But it's not the case ... What I get instead is this:
Question: Am I doing something wrong, or does this function not work for Business Functions in SP03 PL02?
Same applies to Comments for Tasks in Business Process Diagrams ... even though, the Comments are set to be displayed ... they don't appear.
Any ideas?
Thanks & Regards,
Rafael

Hi George,
no, saying 'task', I meant an BPMN Activity -> Task/User Task/....
I can force PD to display the comments, but only if I change the current process language to -> Analysis, then a 'Task' converts into a 'Process' and the comments do appear:
So the question is: is it a bug or is it a 'feature' of BPMN? Or maybe a process in Analysis is not the same as a Task in BPMN ... and I can't set any properties for Tasks in PD... but then ... why does it convert? Task into Process and vice versa?
Once I change the current process language back to -> BPMN 2.0, they dissapear from the diagram.

Procedure Business Function Activation - How To

Hi all,
i have a customer that just upgraded it's systems to ehp4, our newest available release. He is now asking on a general best practice procedure how business functions should be activated in which client and what needs to be transported or not.
He has a system with a reference client (000) and a customizing client (200). My guess would be:
- Activate all required business functions in client 000.
- Make sure, all BC-Sets have been extracted and activated perfectly.
- Activate all missed BC-Sets manually in client 000.
- Transport all changes to client 200.
- Make sure the transport was performed successfully.
- Activate all required business functions in 200.
Is that the correct approach? I guess BC-Sets containing C-Tables can only be activated in a reference client!?
Thanks. Kay.

Sunny - Thanks for the reply and I appreciate the help. You indicated that if transports do not have objects related to the business function, they may not be affected. That's the crux of my question. I certainly understand if SAP requires matching BF activation for any transports that change config in that area, but want to be sure an upgrade of one piece of functionality is not impacting ALL transports to related systems.
Our main driver for the EHP project is updating functions in FSCM (Dispute Management, Collections, etc). These are the only BFs we're intending to activate at this time. I'll lay out an example of my question:
EHP4 installed in all systems (Dev/QA/Prod). Active Business Functions from EHP4 are only related to FSCM and they are only active in Dev system for unit testing. Now say an issue arises in Prod related to Fixed Assets that requires a config change. The normal method would be config in Dev, followed by unit testing. Transport to QA for integration testing. Finally transport to Prod.
Would this transport go through b/c the config has nothing to do with the new business functions activated or would the transport not move to QA b/c the same BFs were not active in QA that were in Dev?
Hope this helps clarify. It seems SAP would never "back you in a corner" like that and the transport should go through, but I've seen stranger things happen!
Thanks again!
CK

Business functions to be activated after EHP4 upgrade

Hi All,
I have recently upgraded ECC 6.0 to EHP4.The following technical usages were selected during download.
Financial Services,Financial Supply Chain Management and Financials.
Please let me know what all business functions that are to be activasted.
Do I have to activate business functions for EHP2 and EHP3 as well.Below are the BFs for our usage types.
Business Function                           Technical Usage                         EHP
/IBS/EAFS_RBD_BUSOPR                           Financial Services                          4
EAFS_BCA_BUSOPR                           Financial Services                          4
EAFS_CML_LOANS_POOLING                Financial Services                          4
FICAX_BILL_INVOICING                           Financials                                                4
FICAX_CI_1                                                Financials                                                2
FICAX_CI_2                                                Financials                                        4
FIN_FSCM_CCD_INTEGRATION               Financial Supply Chain Mgmt     4
FIN_FSCM_INTEGRATION                           Financial Supply Chain Mgmnt     2
FIN_TRM_CORR_FW                           Financial Services          4
FIN_TRM_INS_HM                           Financial Services          4
FIN_TRM_LR_FI_AN                           Financial Services          3
FIN_TRM_LR_FI_AN_2                           Financial Services          4
FIN_TRM_PSM_INTEGRATION      Financial Services          4
INS_FSSR_CI_1                           Financial Services          3
INS_FSSR_CI_2                           Financial Services          4
INS_FSSR_I18N                           Financial Services          4
Out of the above FICAX_BILL_INVOICING,FICAX_CI_2,FIN_FSCM_CCD_INTEGRATION,FIN_TRM_INS_HM and FIN_TRM_LR_FI_AN_2 have dependencies like X_CONT or BI_CONT which are not installed on the system.
I guess I can't activate these business functions.Am I right?
And I read that only one BF set is activated per one system.I did not find any BF set related to Finance in the drop down list of SFW5 in the system.Please enlighten me on this topic.
Regards,
Dinakar
Edited by: mutnuru dinakar on Mar 8, 2011 1:44 PM

> Thanks for your reply,as I mentioned the list of BFs are applicable for the 3 technical usages I had selected during EHP4 upgrade.I need to select out of them.
I understand your question - however, how should anyone else but you know whether you need the functionality behind them? This is a business decision.
I suggest you use the documentation (press on the corresponding "i" in SFW5) to see if the business requires the functionality. If yes, enable it, if not, you don't need to enable it.
Some of those BFs will need a BW/BI to work. You have to decide, whether you need them or not.
Markus

Business Functions in DFD

Hi.
Is it possible to include business functions from different
Applications Systems in a DFD?
I've tried several ways (sharing, reference, master function)
but none seems to work.
Thanks for help.

1. Share the function to target application system
2. Make new function in target application system
3. Set property "Common Function" point to the source-shared
function.
4. The new function will become mirror function of the source
one.
-isa.

Debug JD Edwards "C' Business Function setup for Vistual Studio 2008

Please can anyone send me the setup for Debug JD Edwards "C' Business Function with Vistual Studio 2008
using C:\e812\system\bin32\activConsole.exe

You don't need any setup; just build the bsfn in debug mode, exit form jde, run VS2008, opne the jde solution file, set a brekpoint into your bsfn and it works.

E-Recruiting - Activation of Business Function

Hi all,
i'm facing a problem on our E-Recruiting Development System. I've activated Business Function HCM_ERC_SES_1 and try to work off SAP Note 1098046. Unfortunately there are no BC-Sets with prefix HRERC* visible in transaction SCPR20, so i don't know how to activate them.
How can i get these BC Sets into our system. Is there a download site for .bcs Files or something like that?
Regards
Mark André

Hi Mark
You need to compare the table entries acc to the note from client 000 to prod client.
Please review the note :
E-recruiting-specific Customizing
Most tables for the search are tables of type "C" (= Customizing tables;
maintenance by customers only; no SAP import). In other words, after you
unpack the BC sets, you have to reconcile the relevant tables in client
000 (which contains the delivery Customizing) and the tables in the
productive client. Below, you will find an overview over the relevant BC
sets:
Hope this helps.
Best Regards

Business Function Set

Similar Messages

Maybe you are looking for