Business Functions of type Validation/Constraint not used when defined in the Glossary

Hi,
the problem is the following: in the Glossary, we have some Business Rules defined. They are of type Validation or Constraint and shall be used to validate the data in the system. These Business Rules are used in Domains in a CDM model.
From that CDM model we are generating a PDM model (for HANA, but it's not working for any of the databases available for selection). Now: I would expect, as this has been defined in the CDM, the Business Rules replicated in the PDM model and used as constraints.
This is unfortunately working only for Business Functions, which are directly defined in the CDM model, not for those ones, defined in the Glossary and reused in the CDM model.
Working case:
- define Business Rule in CDM
- define Domain in CDM and assign Business Rule
- assign the domain to a attribute
- generate PDM from the CDM model
- the Business Rule is replicated in the PDM model, the check constraint for the table is generated correctly
NOT working case:
- define Business Rule in Glossary
- define Domain in CDM and assign the Business Rule from the Glossary
- assign the domain to a attribute
- generate PDM from the CDM model
- the Business Rule is NOT replicated in the PDM model, the check constraint for the table is MISSING
Do you think it's a bug, or am I doing something wrong?
P.S.
We are on 16.5 SP05
Thanks,
Rafal

Looks like a bug to me; I would expect the source of the rule to be irrelevant, assuming the PDM has access to the relevant metadata at the time of generation. Perhaps Glossary shortcuts don't have access to all the metadata?

Similar Messages

  • Only in iTunes when I click next song or close iTunes mid song the sound jitters for a split second. That is when I actively click on a functional button. This does not happen when I let the song end and flow into another song. Any ideas?

    I have disabled sound check, crossfade and in quicktime settings in control panel audio is set to 16 bit.
    The jitter/stutter is like a blip. If i press next track it will cut the sound from the previous track momentarily then resume from where I stopped it for a split second before proceeeding to the next track.

    Outlook provides the keyboard shortcut of Ctrl + < (Last item) and Ctrl + > (Next item) to view the message after we open the email item.
    Tony Chen
    TechNet Community Support

  • Custom hostname verifier not used when business services use a http proxy

    On OSB 10.3, we have a business services with an https end point. To access this end point, the business service used an http proxy.
    The certificate of the business endpoint is a wildcard certificate *.certificate.be . So we have a custom hostname verifier defined in the ssl configuration on the weblogic Server
    As we can see with the verbose mode at the jvm, the custom hostname verifier is not used when we use a http proxy in the business service. Osb use a ALSBHostnameVerifier and this one the defaulthostName
    <Mar 2, 2011 7:31:11 AM CET> <Debug> <AlsbTransports> <BEA-000000> <*** Connecting via proxy *** HTTP @ my.proxy.be/XXX.XXX.XXX.XXX:8080>
    [Loaded com.bea.wli.sb.transports.http.ALSBHostnameVerifier from file:/bea/osb_10.3/lib/sb-transports-main.jar]
    [Loaded weblogic.security.utils.SSLWLSHostnameVerifier$DefaultHostnameVerifier from file:/bea/wlserver_10.3/server/lib/weblogic.jar]
    Is there any way to force business service to used hostname verfifier defined in weblogic ssl server config?
    Thanks

    This is a known issue. Raise a case with support and ask a patch for bug#9182604
    Regards,
    Anuj

  • Download ios 7, and the location function is off, I can not access because I forgot the key constraints, I can not restore the iphone because I can not find iphone app access

    download ios 7, and the location function is off, I can not access because I forgot the key constraints, I can not restore the iphone because I can not find iphone app access

    If you have a passcode to the screen lock that you've forgotten, restore the device from the computer to which the device is synced. For information and instructions, see:
    http://support.apple.com/kb/ht1212
    If that will not work, you'll need to put the device into Recovery Mode and then try the Restore again:
    http://support.apple.com/kb/ht1808
    If that still doesn't work, as a last resort try DFU mode:
    http://www.iclarified.com/entry/index.php?enid=1034
    If your device is running iOS 7 and you set up Find My iPhone (iPad/iPod),  however, then it has the Activation Lock on it and you'll need to enter in your Apple ID and password to activate the device after restoring:
    http://support.apple.com/kb/HT5818
    Regards.
    Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Communities page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums and in the Apple Knowledge Base, before you post a question.

  • When people call, they got a busy tone even though i do not use the phone. Whats wrong

    Question: when people call, they got a busy tone even though I do not use the phone. Whats wrong?

    Hey rolffsweden,
    You might have Do Not Disturb turned on - I would check that first:
    To enable/disable, tap Settings > Do Not Disturb. When Do Not Disturb is on, a "moon" icon will appear in the status bar.
    or
    You can enable/disable Do Not Disturb in Control Center.
    from: iOS: Using Do Not Disturb
    http://support.apple.com/kb/HT5463
    Welcome to Apple Support Communities!
    Have a great day,
    Delgadoh

  • Error VISA (Hex 0xBFFF001E) The specified state of the attribute is not valid, or is not supported as defined by the resource.

    Hi,
    First of all I need to say that I just beginning with the instrument control using Labview. For this reason, it's possible that the problem that i have would be easy to resolve. However, I have been looking for any solution for the forum, but unfortunately I can't fint anything. 
    Then the situation is the following: I'm trying to connect a power analyzer (Yokogawa WT1800) with the PC through GPIB. To achieve this objective I use the Agilent 82357B USB/GPIB Interface. The connection is done properly because I can see and comunicate with it through the NI MAX explorer. 
    In order to achieve the instrument control using Labview, I have downloaded and installed the Yokogawa WT1800 driver (ykt1800 Instrument Driver) using the NI Instrument Driver Finder tool. The problem that I have is that when I execute the provided examples I find the following error:
    Error -1073807330 occurred at Property Node (arg1) in Yokogawa WT1800 Series.lvlib: Initialize.vi -> Yokogawa WT1800 Series Measure Continuos Normal.vi
    Possible reason(s):
    VISA: (Hex 0xBFFF001E) The specified state of the attribute is not valid, or is not supported as defined by the resource,
    I tried to change the input arguments of the Visa open vi because I think that is there where is the problem but I can't achieve any solution. In the following image is attached the block diagram of the initialize.vi:
    Any help is appreciated.
    Thank you.
    Solved!
    Go to Solution.

    Hi,
    The Vi should work, I used it with a NI USB-GPIB interface. Can you use HighLight execution to see which property node is failing. Maybe your interface does not support the used property node.
    Kees

  • Since I installed Lion on my macbook the LED light does not pulse when I close the screen - the sleep function does not work.

    Since I installed Lion on my macbook the LED light does not pulse when I close the screen - the sleep function does not work neither when chosen after pressing the button nor chosen in the apple menu..

    I have had the same problem but on another forum it was suggested that disabling internet sharing would solve this. This fix seems to work on my machine - why it works I do not understand

  • Is there a way to address email (i.e. a word or some code) that would place that email in a specified inbox folder?  not using internal rule, rather the beginning of this sort happening as it comes in?

    is there a way to address email (i.e. a word or some code) that would place that email in a specified inbox folder?  not using internal rule, rather the beginning of this sort happening as it comes in?
    In other words
    I tell a friend if he is emailing me on a particular subject, is there something he can do at his end ([email protected]/research)
    like adding the word research at the end of my eamil address that would tell my inbox to place that in the inbox/research folder?
    If I have to use a rule on my end, then do I tell him to just place the word research in the subjct line and then I write a rule to place anything with the word research in the subject line in my inbox/research folder?
    will the subject line be required to only have the one word research to work, or will the rule look for any presense of that word in the subject line?
    thanks
    eric

    iCloud email supports 'plus' addressing. http://en.wikipedia.org/wiki/Email_address#Address_tags
    So your friend could just add '+research' to the username part of your email address, and you setup a rule at icloud.com to put all emails sent to that address into a particular folder.
    For example:
    [email protected]
    There's no way to do it without rules on the server though.

  • I have a problem with my iPhone 5 stopped working the sleep / power and simultaneously refused to obey the HOME button. I can not use either one or the other. I can not enable or disable the device, display lights up when you plug the charger. same displa

    I have a problem with my iPhone 5 stopped working the sleep / power and simultaneously refused to obey the HOME button. I can not use either one or the other. I can not enable or disable the device, display lights up when you plug the charger. same display works fine as it is surprising. or maybe someone knows what is the reason for this? is there any way to solve this problem?

    More than likely its a hardware issue, I have never encountered such a problem and best bet is to just go get it replaced. If you have insurance on your device apple will replace it as long as there was no water damage, if you dont have insurance they will charge $200 more or less. Hope you get it fixed

  • The sort field is not used when ordering multiple cds in one alumn folder, how do I correct this?

    It is using the track number and not the sort order field.  The reason I have multiple cds in one alumn is because they are books on cd.

    Sorry for the typo my "b" key was not working correctly.
    The sort field is not used when ordering multiple cds in one albumn folder, how do I correct this?  It is using the track number and not the sort order field.  The reason I have multiple cds in one albumn is because they are books on cd.

  • Not able to update any apps from new apple id.. Old id im not using anymore., cannot access the old one

    Not able to update any apps from new apple id.. Old id im not using anymore., cannot access the old one.. But during update time asking for same old password of old apple id

    If you change your Apple ID, all the apps you purchased with the previous ID will no longer updatable for you and this problem will continue. You see your old Apple ID because you are likely still using some of the apps purchased on that ID.

  • Where is the customer service? Can not use my subscribtion on the second computer, it does not download keeps seeying buy buy buy

    Where is the customer service? Can not use my subscribtion on the second computer, it does not download keeps seeying buy buy buy

    Where is the customer service? Can not use my subscribtion on the second computer, it does not download keeps seeying buy buy buy

  • "Could not use move tool because the target channel is hidden"

    I tried removing the quick mask in the channel side bar and also uncheck "edit in quick mask mode" but I still cannot stop the pop up saying "Could not use move tool because the target channel is hidden". I cannot draw any objects or move them. What should I do?

    You are getting an error because you are in  "Quick mask edit mode". There are few ways to exit. You can, for example, use [Q] button or delete layer as well.
    All have been listed on blog.i-evaluation.com, article: “Could not use move tool because the target channel is hidden” – Photoshop Warning
    Hope that helps!
    ps. My first post on adobe forum. Hope I helped someone.

  • Hello i have a problem  i can not use adobe programs. The payment for the month march is not be payed, but i will pay the payment.I can not found where i can do that. Also i see that my membership is stopped.

    Hello i have a problem  i can not use adobe programs.
    The payment for the month march is not be payed, but i will pay the payment.I can not found where i can do that. Also i see that my membership is stopped.

    Try the not-charging topic of:
    iPod touch: Hardware troubleshooting
    It could be that the battery is dead.

  • Validating old serial number I used when I purchased the product.

    I'm reinstalling MC6 but it won't validate the serial number I used when I purchased the product. How is this resolved?

    In this case I would suggest your to check your host file entries once.
    You refer below link ( step 3 )
    Sign in, activation, or connection errors | CS5.5 and later
    If there are no Adobe entries under your hosts file , Try to disable your Anti-virus software for a while and check (  make sure to disable the firewall option anti-virus if available)

Maybe you are looking for