Business Graphic UI Element - Major Ticks Property

Dear All,
We have a requirement to modify the existing Business Graphic UI element (Line Graph).
We are not able to increase the major ticks property of Business Graphic UI element to 21.
Are there any constraints on this property ?
Thanks.

Hi,
Do you mean the properties of the ValueAxis-Line, Number = 21 and Major tick calculation = Manual ticks?
I do not see a restriction. Everything works fine.
Make sure to use the latest IGS!
Regards, Kai

Similar Messages

  • How to use series in business graphic ui element

    Hi All,
    How to use the series in business graphic ui element? my requirement is i have to display the sales in selected months in graph(these values dont know at design time).
    Regards
    Srikanth

    Hi,
    Use the dynamic node  and bind this node to the BG source node and series nodes.
    Create a node and bind this node to the BG source and the value that you want to shown in series has to be bound to that attribute of the node and similarly with the category.
    Check out for the dynamic node creation and bind this node to the BG.
    Regards,
    Lekha.

  • Business graphics ui element

    Hi,
    Please can you tell,
    How to work with Business Graphics UI Element with Brief steps
    Regards,
    Boots.

    Hi,
    Refer pdf at https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/3261cd90-0201-0010-268c-d8d72e358af6
    http://help.sap.com/saphelp_nw04/helpdata/en/e5/08b6eb35637a44830b9e6df22987aa/frameset.htm (SAP Library)
    Kind Regards,
    Nitin
    Edited by: Nitin Jain on Feb 18, 2009 12:09 PM

  • Business Graphics UI element Time_Scatter

    Hi,
       Can anybody provide a example for implementing Business Graphics UI element of chart type time_Scatter.
    Regards,
    Vaibhav

    Hi VaiBhav,
    Please go through these links,
    http://help.sap.com/saphelp_nw04s/helpdata/en/ed/258841a79f1609e10000000a155106/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/18/d4d43fb9490c65e10000000a114b1d/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/a8/1cd93f5e0f9015e10000000a155106/frameset.htm
    /people/perumal.kanthan/blog/2005/04/07/business-graphics-real-time-scenariospart-ii
    Regards,
    Ramganesan K.

  • Business Graphics UI element Column Width

    Hi Experts,
    I am using business graphics UI element in my Web Dynpro application to display the chart in columns .
    I am able to display the chart properly based on the node data.
    But the issue that I am facing is that when the node data is less, the column in the chart is getting expanded(column width is increased) as I am not able to set the width of the column dynamically based on the node size.
    The column width keeps on changing based on the node size.
    Is there any possible way to set the column width dynamically or fix the column width irrespective of the node size?
    Best Regards,
    Anurag

    Hi Guys,
    Is there any update on this?
    Best Regards,
    Anurag

  • Business Graphic show elements sorted

    Hi ,
    i use a business graphic UI Element to display some results.
    Categorie -String (Projectname)
    1 Serie -Integer (Changelists sum)
    How could i show these elements sorted on diagram? I have sorted the elements by using the function node.sort(Comparator), but the Business Graphic UI Element seems not to match it.
    my Comparator class:
    private static final  Comparator DEFAULT = new  Comparator(){
         public int compare(Object o1, Object o2) {
         if (o1 == null && o2 == null)
                                  return 0;
         if (o1 == null)
                                  return -1;
         if (o2 == null)
         return +1;
    IPrivateBusinessGraphics.ICategoriesPieChartElement     
    o1_new =(IPrivateBusinessGraphics.ICategoriesPieChartElement)o1;
    IPrivateBusinessGraphics.ICategoriesPieChartElement o2_new=(IPrivateBusinessGraphics.ICategoriesPieChartElement)o2;
    if(o1_new.getChangeListsSum()>o2_new.getChangeListsSum()){
    return 1;
    else if(o1_new.getChangeListsSum()<o2_new.getChangeListsSum()){
    return -1;
    else{
    return 0;
    Could you help please to solve this problem?
    Thank you in advance!
    Best Regards,
    Daria

    use the  following steps...
    1. open that chart editor using Edit Customizing Option.
    2. from the Overview select Series node. Right click on it and Add Series.
    3. Series1 will be added. now select Series1 and in the below section go to Area Properties node.
    4. expand it and choose the color you want for the first series.
    5. similarly add Series2 with teh desired color.
    6. then go to the view designer after saving the required changes.
    7. go to the properties of simpleseries1 and in customizingID field write 'Series1'.
    8. similarly fill other simpleseries also with the respective values.
    save it
    activate and its done.
    thanks
    sarbjeet singh
    Edited by: sarbjeet  singh on Apr 28, 2011 3:58 PM

  • Setting series color in the Business Graphics UI element

    Hi all,
    I'm using the Business Graphics UI element in my Web Dynpro application.
    I set the color for various properties using chart designer, then I add the generated XML in the doModifyView method: bg.setDirectCustomizing(xml file) and most of it works.
    However, when I change the series' color, I don't see any change in the xml file (see snapshot).
    http://img90.imageshack.us/my.php?image=graphjy1.jpg
    My xml starts with <SAPChartCustomizing> and ends with </SAPChartCustomizing>.
    How can I set the series' color using the custom xml file?
    Thanks,
    Omri

    Hi,
    as the connection between your data and the customizing settings works via IDs you have to make sure that you set exactly the same ID for a data series as defined in the chart designer.
    In case that you use point customizing make sure that you do not set an ID for the points of your series. Instead set the series customizing ID for the series only! Keep in mind that point customizing always overwrites series customizing if both are defined.
    Regards, Kai

  • Customizing Property of Business Graphics UI Element

    Hello Web DynPro Developers,
    I'm trying to implement a dynamicly created Business Graphic. In order to set the properties for the "Series" (which will normaly be set through the Chart Designer) i try to deliver a XML Customizing File with the customizing properties.
    The API Documentation says that this property requieres a  URL which points to a valid XML file.
    After setting the Customizing property to a URL with an XML Configuration, the J2EE Engine does not try to retrieve the XML document (traffic watch).
    Is this a not implemented feature? How to set the configuration of Business Graphic dynamically?

    Dear Kai,
    Thanks a lot for your response.
    1. According to your suggestion (note 531668), it has been found that XMLCHART is already installed on our Integrated IGS server.
    2. According to note 1028690, it has been found that "IGS 6.40 with patch level 19 or higher" should be available, but in our case we have "IGS 6.40 with patch level 16". Now what I would like to inquire is that does upgradation have any side effects on server?
    For your information I would like to clear you that I want to use Vrinda font (its a standard font), but at present font shown in the chart is Arial.
    Do we need to install some other Interpreter (eg. GFWCHART)? or some thing else is required to show the desired standard font?
    Regards,
    Nittin

  • Unable to set fontFamily property in Business Graphics UI Element?

    Dear All,
    I was trying to set the fontFamily property of BusinessGraphics(BG) UI Element. After setting the fontFamily property for BG UI Element, this property is not getting reflected in the chart in Portal but it is reflected under Chart designer. Is there something which is overwriting the user defined setting for fontFamily? and I am not using any URL for IGS.
    On the other other UI Element properties like ChartType and dimention are reflected in both Chart Designer and Portal.
    Please respond at ur earliest.
    Thanks in advance.
    Regards,
    Nittin
    Edited by: Nittin Garg on Jun 18, 2008 11:33 AM

    Dear Kai,
    Thanks a lot for your response.
    1. According to your suggestion (note 531668), it has been found that XMLCHART is already installed on our Integrated IGS server.
    2. According to note 1028690, it has been found that "IGS 6.40 with patch level 19 or higher" should be available, but in our case we have "IGS 6.40 with patch level 16". Now what I would like to inquire is that does upgradation have any side effects on server?
    For your information I would like to clear you that I want to use Vrinda font (its a standard font), but at present font shown in the chart is Arial.
    Do we need to install some other Interpreter (eg. GFWCHART)? or some thing else is required to show the desired standard font?
    Regards,
    Nittin

  • Business Graphics -- IGS URL

    Hi Experts,
    I have a query related to Business Graphics UI setting for IGS URL. currently we have developed an application which uses a Business Graphics UI element.
    This application is developed in our organization and hence we have made the necessary settings for the UI. i.e the IGS URL.
    During development, we have set the URL of our development server for the IGS URL property of the Business Graphics UI.
    But my question is, tomorrow if we deploy our application on any of the customer's location which is outside our organization's infrastructure (Server), will the application render the graph properly if we just open the IGS port or will it still try to connect to the URL which we have assigned for the IGS URL property of the UI element?
    Any suggestions on this would be helpful to avoid further problems.
    Regards,
    Poojith MV
    Edited by: Poojith M V on Apr 20, 2010 7:31 AM

    http://help.sap.com/saphelp_nw70/helpdata/en/46/8cb295e6390e9ce10000000a155369/frameset.htm
    Armin

  • Business Graphics- tooltip with series values

    Hi all,
    I'm using the Business Graphics UI element.
    I have a simple series and I want to show the series' values in the tooltip of the series.
    However, the tooltip property is not bindable for simple series.
    I tried using Series (not simple series), the tooltip works but I get multiple values for each category.
    See attached snapshot (I want the graph to look like the left graph but with tooltips...)
    http://img70.imageshack.us/img70/2977/businessgraphicsop4.jpg
    Basically, I need to see the values in a tooltip on a category based chart.
    Is it possible to create category based chart by using Series and not SimpleSeries?
    How do I solve it?
    Thanks,
    Omri

    Hi,
    I've change the context a little and now it's looks like this:
    Context:
    Category (Node, singleton)
    --> Series (Node, non singleton)
    > value (Value attribute)
    -->Text (Value attribute)
    UI: (UI Element, property, propertyValue)
    Business Grpahics -- seriesSource -- Category
    --Category -- description -- Category.txt
    --Series -- label -- Category.txt
    --Series -- pointSource -- Category.Series
    SeriesPoint -- tooltip -- Category.Series.Value
    SeriesPoint -- valueSource -- Category
    NumericValue -- value -- Category.Series.Value
    Thanks,
    Omri

  • Business Graphics UI SimpleSeries Changing Label Dynamically

    Hi guys, I am using the business graphic UI element in one of my WD4A component. My BG has 2 simple series and one category. As I can see, using simple series, the label property cannot be bound against a context node attribute. I have to find a way to set this property dynamically.
    According to this link: click after on the simple series
    [http://help.sap.com/saphelp_nw70/helpdata/EN/ed/258841a79f1609e10000000a155106/frameset.htm|http://help.sap.com/saphelp_nw70/helpdata/EN/ed/258841a79f1609e10000000a155106/frameset.htm]
    It seems we can change the label property dynamically, maybe using the API but how?
    I found the interface IF_WD_BUSIN_GRAPHICS_MTD_HNDL, but I don't know how to use it!
    thanks
    Alex

    Hi Alexandre,
    have a look at the Web Dynpro component WDR_TEST_EVENTS, view BG_SIMPLE_IN_MPANE, method WDDOMODIFYVIEW.
    Here is a snippet for setting additional customizing or data for a business graphics view-element. Call this from method WDDOMODIFYVIEW.
    DATA lr_bg TYPE REF TO cl_wd_business_graphics.
    DATA lr_bg_method_handler TYPE REF TO if_wd_busin_graphics_mtd_hndl.
    DATA lr_add_cust_xml TYPE REF TO if_ixml_document.
    lr_bg ?= ir_view->get_element(  <your viewid of business graphic>  ).
    lr_bg_method_handler ?= lr_bg->_method_handler.
    lr_add_cust_xml =  get_<your additional customizing/data>.
    lr_bg_method_handler->add_direct_customizing(
    i_customizing = lr_add_cust_xml
    Kind regards,
    Silke

  • Static Business Graphic to Adobe Form

    There is a View with an static BGR binding to a node.
    At runtime I can see the graphic.
    When I press a button is launched another view with an Interactive Form.
    So, my question is:
    Is there a method (or something) that let me create the XSTRING wiht the graphic automatically, that I will use in the node binding to the Interactive Form?
    Best regards,

    Hello Gastón,
    I think with Netweaver 7.02/7.20, business Graphics UI element is provided with a property called imageData. Using this property you receive the image of the chart rendered, in a XSTRING format. this can be passed on to interactive form to display the chart.
    Might be we can wait for other experts to comment on this.
    BR, Saravanan

  • Drill down in pie chart using Business Graphics?

    Hi,
    I have create a pie chart using business graphics UI element. is it possible to drill down when we click on a part of pie chart?
    Please let me know how can we achieve this. Thank you.
    Regards,
    Bharat.

    I got the solution. we can identify this by using the event id property.
    Regards,
    Bharat.

  • Refresh the Business Graphics Data on click of next page event of a table

    Hi Experts,
    We are using Business Graphics UI element in Web dynpro Java to display a table data.
    We are limiting the graphics data to 12 table entries at a time.
    Now, I just want to know how can we refresh the Business Graphics data when the user clicks on the Next Page option at the bottom of the table.
    This is applicable if we have more than 12 table entries and we've restricted the visible row count to 12.
    So, for more than 12 entries; when the user selects the next page, I want the next set of data to be displayed in the Business Graphics UI element.
    But I am not able to get the action for the Next Page event.
    Please note that we are on Netweaver 7.01.
    Kindly suggest as how can we achieve this functionality.
    Kind Regards,
    Anurag

    check this
    Web Dynpro Java Table Paging Unleashed: Optimizing Heavy Table Performance

Maybe you are looking for