Business graphics Customizing chart not found; contact administrator in MSS

Hi All,
We are getting error Business graphics Customizing chart not found; contact administrator in MSS-->Home Service only for one user but for remaining users it is working fine. Please find the below screenshot.
Please provide your inputs......
Regards,
Rahul.

go to t -code st01 and switch on the trace on top and tick the buttons in that and after that ....check for working manager user id first and do it with this user which is not working u can know any authorisations are missing assign them for this user ..ur issue will be solved

Similar Messages

Universe not found(contact BO administrator)

Hi Every Body,
I log on to WEB INTELLIGENCE RICH CLIENT on my desktop.When i try to run the report it is showing error as "Universe not found(contact BO administrator)".Could you help what might be the reason for this error.
Regards,
Swapna.

Hi Swapna,
What I think might have happened here is that at some point you associated the WebI report with a local copy of the universe.
When you do a save as... it will be treated as a new universe.
Also it will move physically to a different location.
Now when you export the universe later and BO detects the universe is already there, you will be asked if you want to overwrite that universe.
If you say yes the universe will move again physically from the 'local universes' spot to the 'CMC universes' spot.
So if you created or ran your WebI report on the local universe, it will still try to look for that, cannot find it and raise the error.
On a different PC you will not have touched the WebI report and it will be still pointing to the CMC version of the universe, if there is a newer version it will get imported and the report will run as usual with the new version.
So some advice given before is solid. It helps to just clear the user directories of universes and webi reports and import them fresh when you need to. A little caution with just deleting since there might be work that isn't exported yet.
So what also helps is to just point the user directories to a different spot, so you can always fall back on the original versions too.
Clear the universe copy and webi document, or point to fresh directories,
import the webi document and it will import the associated universe if you run it,
just like it did on the fresh different pc.
Good luck,
Marianne

Error code "A valid key code to use the Business View Manager is not found"

Hello.
I am trying to resolve this message in the Business View Manager. The message of " A valid key code to use the Business View Manager is not found" appears when accessing a folder in the Repositiry Explorer. I have admin rights for View, Edit and Set Security.
What am I doing wrong?

Try running this query in the CMS Query Builder tool:
Select * from CI_SystemObjects where si_id = 4
When the query returns, look for the attribute "SI_CAN_USE_METADATA" and see if its set to false. Or see if something else in there is set to false that looks more suitable. Your keycode might have the BusinessView manager locked out. The error sounds more like a keycode restriction than a permissions issue with security.

External content type error: Business Data Connectivity object not found.

Hello
I have to change the external database (external system) for an external content type. The database view on the new database is exactly the same as on the old database.
After changing the external system of the external content type, this happens:
When I try to add a new item to the list, I get this error under the external data field:
"Business Data Connectivity object not found. Administrators, see the server log for more information."
Also, when I try to update the external data field, it is not possible because the buttons are grey.
When I add a new external data field to the same list, I can use the external content type. For some reason the current external data field doesn't update.
Any ideas?
Any help would be much appreciated!

Have you implemented both ‘Read List’ & ‘Read Item’ operations in your ECT?
This may be helpful -
https://sharepointcreations.wordpress.com/2014/03/13/business-data-connectivity-object-not-found/
Thanks
Ganesh Jat [My Blog |
LinkedIn | Twitter ]
Please click 'Mark As Answer' if a post solves your problem or 'Vote As Helpful' if it was useful.

Wifi driver and graphics card driver not found, drivers avilable on site says incompatiable .

wifi driver and graphics card driver not found, drivers avilable on site says incompatiable .

Hi:
The parts list for your notebook indicates that it has a Realtek RT8723BE 802.11bgn 1x1 Wi-Fi and Bluetooth 4.0 combination adapter.
These would be the W8.1 drivers you need for that card...
Wireless:
http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=6943827&swItemId=ob_143747_1&swEnvOid=415...
Bluetooth:
http://h20564.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_142906_1
See if the Intel graphics driver directly from Intel works...
https://downloadcenter.intel.com/download/24870/Intel-Iris-and-HD-Graphics-Driver-for-Windows-7-8-8-...
Then install the nvidia hd graphics driver.

How can I run graphic object on report. ( I got REP-1246 Chart not found)

Hi All,
I made a report that consists a chart object. When I run it on report builder, it works well. But When I call the report from client side, I got "Rep-1246 Char Document not found" . I tried to solve it , I couldn't solve the problem . If I delete chart object from report , then report works well on client side. I didn't use graphics builder to create graphs I used only report builder to do it. I read the threads about it , but I couldn't find the solution. All solutions are about path of graphic file. I don't understand it. Because I only have *.rdf *.rep file. There is no any graph file in my system. I can create it in graphic builder but I don't know how can I deploy the graph object into report layout and run ?
I need urgent help ..
Thanks in advice
Suleyman

Hi again , I used developer 2000. In order to show graphic object on report firstly
I created my graphic object on oracle graph builder.After that I save it like mygraph.OGD . Then I added graphic object on report builder by using graphic object on report builder. When you click the graphic object you will see CHART FILENAME part in part of CHART. In this field , you should add graphic file path that you created on graphic builder. I added mygraph.OGD into this filename part. I worked well.
Good LUck !

Business Rule Error: Fact not found in the rule engine working memory, rule

I am trying to create a simple decision table with an input(ValidateInput) and a output(ValidateOutput). The input and output schemas have unbounded and nested elements(Parent-child relationship). When I create a condition(specific condition on input) and in the action I am asserting the output object. But when I run using EM it throws the following exception. It would be helpful if somebody could tell me what could be the problem. Please note when I set the output as ValidateInput object then it runs fine. Also it executes fine with ValidateOutput if it doesn't have unbounded(List) element inside it.
Error Message: {http://xmlns.oracle.com/OracleRules10/OracleRules10_DecisionService_1}operationErroredFault
Fault ID rules:211
Fault Time Jun 18, 2011 10:45:13 AM
Non Recoverable Business Fault :
Fact not found in the rule engine working memory, rule session execution failed. The rule session 270013 failed because an instance of the fact com.example.customer.ValidateResponse could not be found in the working memory of the rule session. This is most likely a rule modeling error. The decision service interaction expects the fact instance to exist in the working memory of the rule session. Check the rule actions in rule designer and make sure that a fact of the expected type is being asserted. If the error persists, contact Oracle Support Services. 270013
Edited by: reachsky on 18 Jun, 2011 9:57 AM

It's working now..I had to use Global variable to declare child element of the output variable and use the same during action.

Business Graphics Customizing

Hi,
i want to set customizing for my business graphics element in Abap WebDynpro.
If i click with the right mouse button on the BG element, and change something and then click ok, the transport request dialog appears. I select one and click ok.
But the system does not create the Folder "MIME Objects" in the WebDynpro Component! In another system it creates this folder and includes the created customizing xml file. But not in this system. Why?
The consequence is that it ignores the customizing if i run the wd component.
Can anybody help?
Kind Regards,
Thomas

If you use the chart designer tool (by clicking secondary mouse button on the business graphics ui element), it automatically sets an url into "customizing".
you find this generated xml in mime repository -> sap > bc > webdynpro > <application_name>.
My question now is:
How can i use the settings i made dynamically in a method?
i tried it by setting an id like this:
lr_series_element->set_attribute( name = 'CUSTOMIZING' value = 'Series2' ).
In View designer i set "CustomizingID" to the corresponding node in context..
Thx a lot!

Business Graphics: Speedometer chart: Change Maximum value on runtime

Hi Skilled,
We faced a little problem in our project. We use Business Graphics component and Speedometer chart on the View and we should change maximum value of the graphics on runtime.
I could easily change the maximum on design time in Chart Designer -> Axis -> Maximum Value, but I haven't found a way to change it on runtime.
Are there any known ways to change the value on runtime?
Best Regards, Dmitry

Hi,
by calling setDirectCustomizing you can provide customizing XML at runtime.
Create your own customizing XML where you define the maximum value and call this method.
You can also use the SAP Chart Designer from SDNs download area for creating the XML (just to get an idea how the XML has look like in your application).
Regards, Kai

Custom page not found

Is it possible to change the page not found error page? So if a user happens to try and modify the URL to go to a page that is not valid then rather than the usual, eg :
<i>
Contact your application administrator.
Error ERR-1016 Application "104" Page "4" not found (requested language="en-us")
OK
</i>
a custom page is shown.
Thanks

Hello,
You can do that in your Apache mod_rewrite rules.
Have a look here: http://httpd.apache.org/docs/2.0/misc/rewriteguide.html
Regards,
Dimitri
-- http://dgielis.blogspot.com/
-- http://www.apex-evangelists.com/
-- http://www.apexblogs.info/

Business Graphics - Bar Chart - How to make the height extendable

Hi Experts,
I have created Business Graphics UI element for my WD application which fetches data from R/3. I am displaying
1) Cost Element in Y-axis and Cost in X-axis.
2) I have set ChartType = Bar, height = 300, width = 830
When the no of cost elements is upto 7-8, the graph is getting displayed correctly.
However when the no of cost elements increases to more than 12, the graph becomes un readable. The system displays lot of texts in Y-axis.
I want to make sure that if no of cost elements increases, the Y-axis of graph should extend.
How we can do so?
Regards,
Gary

I could not got any solution of this issue. Finally I convinced the customer to display only top 10 records. Any way higher level managers won't have time to see the graphs of all data.
One way of resolving the issue is like this - create say 3 Business Graphic UI element. The height of Business Graphic UI element can be set as 300, 600, 900 etc.
For 10 records use Business Graphic UI element of height 300.
For 20 records use Business Graphic UI element of height 600.
For 30 records use Business Graphic UI element of height 900.
Use the 'Visibility' data type to hide / unhide the Business Graphic UI of different height.

Custom field not found in in the definition of EAI Integration Component

Hi,
I added a custom field to Account with integration tag "FirmsOfficesType". I got an error when I'm adding an account:
Element with XML tag 'FirmsOfficesType' is not found in the definition of EAI Integration Component 'Account'(SBL-EAI-04127)
Here is the soap message for adding a account:
<s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/">
<s:Header>
<wsse:Security xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" s:mustUnderstand="1">
<wsse:UsernameToken>
<wsse:Username>user</wsse:Username>
<wsse:Password Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText">passwd</wsse:Password>
</wsse:UsernameToken>
</wsse:Security>
</s:Header>
<s:Body xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<AccountInsert_Input xmlns="urn:crmondemand/ws/ecbs/account/10/2004">
<ListOfAccount xmlns="urn:/crmondemand/xml/Account/Data">
<Account>
<Status>Active</Status>
<PrimaryBillToCity>KANSAS CITY</PrimaryBillToCity>
<PrimaryBillToCountry>USA</PrimaryBillToCountry>
<PrimaryBillToPostalCode>64150</PrimaryBillToPostalCode>
<PrimaryBillToState>MO</PrimaryBillToState>
<PrimaryBillToStreetAddress>1805 ABC ROAD</PrimaryBillToStreetAddress>
<PrimaryBillToStreetAddress2>STE 300</PrimaryBillToStreetAddress2>
<ExternalSystemId>OF222652</ExternalSystemId>
<IntegrationId>OF222652</IntegrationId>
<Location>OF222652</Location>
<MainPhone>+1 1235877526</MainPhone>
<AccountName>ABC Inc</AccountName>
<AccountType>INDEPENDENT BD A</AccountType>
<FirmsOfficesType>Branch</FirmsOfficesType>
<FirmName>ABC SECURITIES CO</FirmName>
</Account>
</ListOfAccount>
</AccountInsert_Input>
</s:Body>
</s:Envelope>
thx

Hi
Please go through the related pointers ->
The OSS note 672960 has already indicated you need to use BADI to address it.
For Search criteria
You can also use user-defined fields as search criteria. To do this, you have to set fields XINPUT and XDISPLAY to 'X' in table ET_FIELDS for the fields you want to use in BADI BBP_CUF_BADI_2 in method MODIFY_SCREEN. The fields defined this way are displayed if you choose the 'Extended search' link.
Re: Custom field in Create Bid Invitation..
Re: Search Help for Purchasing Group..
Re: urgent help request - How to add custom fields to header BID.
Re: New Screen with table control information in Process Bid Invitation
Do let me know.
Regards
- Atul

Business Graphics, intermixing chart types

Hi to all,
Has anyone tried to intermix chart types? Specifically, i'm trying to display a "column" type chart, but I would like to have a straight horizontal line through the chart indicating a key value or values. Any help would be greatly appreciated.
Thanks in advance

Hi Michael,
follow the following link
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/web dynpro tutorial and sample applications.faq#q-20
How to use Business Graphics in Web Dynpro applications?
The following tutorial shows you step-by-step how to create a simple business graphic using Web Dynpro.
A simple business graphic is a chart consisting of a category and one or more data series. Column charts, bar charts and pie charts are typical examples of simple business graphics.
Simple business graphics differ from complex business graphics, such as scatter charts and portfolio charts.
Requirements
In order to use business graphics in your application, you must install the Internet Graphics Service (IGS) on your server environment. Furthermore, the IGS must be configured on the J2EE engine.
Code Sample
The ready-to-use project is available to download from SDN.
Corresponding Tutorial
Using Business Graphics
Hope this helped you
Regards,
RK

Business partner Customer is not created for Sales B Role in R/3

Hi,
I am trying to create Customer for a business partner associated with itin Tcdoe BP. I m giving the account management and Payment terms Tab details and clicking on SAVE button. The screen values are not retained and the Customer,Comapny code combination is also not created.
thanks,
Deepthi.

OSS Note 1254214 is applied and it is solved.

Custom LoginModule not found, error "Found in negative cache"

Hi all,
I am working with NetWeaver 2004s SR3 SP14 on SuSE 10 with Oracle. I am
writing a custom LoginModule and I get this error in the default trace file when my
sample app tries to use my login module:
[EXCEPTION]
{1}#2#com.mycompany.dc.netweaver.MyLoginModule#java.lang.ClassNotFoundException:
com.mycompany.dc.netweaver.MyLoginModule
Found in negative cache
The class name for my login module is: MyLoginModule and it is in library:
MyLoginModuleLibrary (so the name of the library project in Developer
Studio is MyLoginModuleLibrary and it is the component name in
server/provider.xml for that project). MyLoginModule requires the use of
classes in another library also written by my company (called
mycompany_libs). To complicate matters, mycompany_libs uses JNI. I tried
adding the JNI library directory to the LD_LIBRARY_PATH shell variable
(set before running startsap in the sidadm user's shell). Though I
could find few references to developing using JNI (so if someone out there
has references for using JNI with Netweaver, it would be great, and very
helpful if you would post them).
I was able to successfully deploy MyLoginModuleLibrary and mycompany_libs.
I put the following in the property: LoginModuleClassLoaders in the
security provider properties:
library:mycompany.com~MyLoginModuleLibrary,library:mycompany.com~mycompany_libs
(Note: I changed the provider name server/provider.xml to mycompany.com
for both libraries: MyLoginModuleLibrary and mycompany_libs and that is the
reason why I have the "mycompany.com~" prefix before each library name.)
I added mycompany_libs to the references in server/provider.xml for
MyLoginModuleLibrary. The references look good in the ClassLoader viewer.
But I still get this error. I've restarted the server several times to
try to clear the negative cache (using stopsap, then startsap), but to no
avail.
One thing that I find interesting (and it could be a possible clue to the
problem) is that neither library:mycompany.com~MyLoginModuleLibrary nor
library:mycomany.com~mycompany_libs appears in the ClassLoader name
or in the References in the error message in the log file. I don't know why not
(I would guess that both of these entries should be in the references and Class
loader name in the log file).
Any ideas?
-- Katrina

I tried 2 tests:
(1) I kept all names the same, but removed all of the complexity from the login module. This new login module would just return true when login() is called and add the principal: "sillyuser at testing dot com" to the principal list when commit() is called.
(2) Just like the first test (i.e. a very simple login module that does no real authentication at all), except I changed the name of the library, the LoginModule class, and the jar file. The provider name was still mycompany.com. I corrected references in LoginModuleLibraryLoaders property in Security Provider.
Test (1) had the same error (ClassNotFoundException "Found in negative cache"), but test (2) worked! It was able to load my login module and I was able to see the trace entries in the log file.
So, I guess the problem is that the "negative cache" is not getting cleared. Anyone know how to clear it?
Thanks,
Katrina

Business graphics Customizing chart not found; contact administrator in MSS

Similar Messages

Maybe you are looking for