Business Intelligence Screen not coming up in EM in OBIEE 11g

Hi Gurus,
1.) I am stuck in the Enterprise Manager where I click on the Business Intelligence --> coreapplication and nothing comes up for long time, I really don't know what are the reasons the BI screen does not come in the Enterprise Manager, I need to configure the Scheduler and Main desperately.
It will be of immense help if somebody helps me to identify the problem.
2.) Also the Scheduler tables were not installed during RCU installation, how can I install the 5 tables needs for scheduling jobs on OBIEE 11g Linux env.
Regards,
Amit

This would be a better forum for this
Business Intelligence Suite Enterprise Edition
Business Intelligence Suite Enterprise Edition

Similar Messages

Oracle Business Intelligence is not supported on this Windows version

Hi Guys,
I uninstalled OBIEE 10.1.3.4.1 and OBIA 7.9.6.1 and after that i did disk cleanup from Start->Accessories->System Tools-> Disk Cleanup.
And after that when i tried to Install OBIEE 10.1.3.4.1 i got the following error.
Oracle Business Intelligence is not supported on this Windows version. Oracle Business Intelligence is only supported on Windows XP x86, Windows 2003 x86, Windows 2003 AMD64, Windows 2003 EM64T, Windows Vista x86, Windows Vista AMD64, Windows Vista EM64T, and Windows 2000 x86.
But my machine is Windows XP x86 and I have installed OBIEE. I was surprised when i saw this error.
In Run-> CMD when I type Systeminfo i get the following error.
Loading Network Card Information...
ERROR: Provider Load Failure.
I would appreciate if any one of you can let me know what could be the problem.
Thanks a lot!
Edited by: user10511107 on Mar 14, 2010 9:22 PM

Hi Daan,
I belive we all shoud consider http://forums.oracle.com/forums/ann.jspa?annID=939
I get upset to see people on this forum who answer the questions like *'use google'* or *'let me google it for you'* or *'use this forum filter'*
I belive it is better to help them answer a better question or if you don't like the question ignore it.
Hi user10511107,
I belive your problem is with Windows not with BI, BI just can't get windows version,
If you are on right version of windows go to MSDN and search for your error and how to fix it
ERROR: Provider Load Failure.
Regards
Nicolae

Business Intelligence Template not available

Hi,
I just upgraded a SP site from 2010 to 2013. And have turned on performance point services etc at both the site collection and site level. However, When I try to create a Business Intelligence subsite, that template is not available for me to select. Any
ideas of what I can do to fix this issue?
Sherazad

Verify if PerformancePoint is correctly associated with the web application. Refer to the following post for more information.
http://blogs.lessthandot.com/index.php/datamgmt/dbadmin/mssqlserveradmin/sharepoint-2013-bi-part-10/
http://sharepoint.stackexchange.com/questions/72176/where-can-i-found-and-how-can-i-configure-bi-center-site-collection-sharepoint-o
Cheers,

Business Intelligence folder not able to see,

Hi All,
I have installed the Enterprise Portal 7.0. only on server. I am trying the intergation of the BI system in portal. I am not able to see the "Business Intelligence" folder under Portal Content>Portal Content(brower)>Content Provided by SAP>platform_add_ons>
I have not installed the BI system with portal. I have installed JAVA BI system with ABAP BI (I want to integrate the BI in portal which is installed on different host). Please help me to resolve this issue.
Thanks,
Shambo

Hi,
Thanks for quick reply. Actually I have installed the ABAP+BI JAVA. With this by default the EP is installed. But I want to integrate the BI system in EP server installed on different host.
I am following the same procedure which I get in SDN.Please help me to resolve this.
Thanks,
Shambo

Tables not importing to the repository in OBIEE 11g

Hi friends,
Soon after giving OCI connection, im trying to import five tables from my user, soon after selecting the table and giving import. The import dialog box is opening and it is keep on importing and it is not stopping at all, due to that the tables are not coming to the repository.
What is the problem over here.
Thanks
All izz Well
GTA

I tried, like that also but it didnt helped me too.
GTA

Not able to login in to OBIEE 11g Analytics on windows 7

HI All,
I have installed OBIEE 11g Version 11.1.1.6.0 on linux machine but i am not able to login into Analytics Page on windows 7 Machine whereas i am able to login in Analytics through windows xp Machine. All OBIEE Services are up and Running.
Regards,
J

Hi,
Try to check sawlog0 and nqserver.log latest error message? is your BI- LDAP working previously or fresh configuration error?
Note: It dosn't matter whether it's win 7 or windows xp. i am sure some wrong in ldap or Make sure your DEV_BIPLATFORM/DEV_MDS Schema password locked/expired if yes try to unlock it then test it out.
For More abt ldap confi ref my blog
http://obieeelegant.blogspot.com/2012/01/obiee-11g-integration-with-ldap.html
Security troubleshoot ref
http://www.rittmanmead.com/files/biforum2012/heljula_security_123.pdf
Thanks
Deva

NodeManager.properties file not able to generate while installing obiee 11g

hello,
I am trying to install obiee 11g on windows 7 64 bit machine. I am successfully able to complete all the steps ,but i get stucked in the last step of creating Domain
follwing are the logs generated :
NMProcess: <Mar 25, 2013 7:21:35 PM> <SEVERE> <Fatal error in node manager server>
NMProcess: java.lang.NullPointerException
NMProcess: at java.util.Hashtable.containsKey(Hashtable.java:314)
NMProcess: at weblogic.nodemanager.server.NMServerConfig.initNetworkInfoList(NMServerConfig.java:491)
NMProcess: at weblogic.nodemanager.server.NMServerConfig.getNetworkInfoList(NMServerConfig.java:481)
NMProcess: at weblogic.nodemanager.server.NMServerConfig.getConfigProperties(NMServerConfig.java:545)
NMProcess: at weblogic.nodemanager.server.NMServer.<init>(NMServer.java:154)
NMProcess: at weblogic.nodemanager.server.NMServer.main(NMServer.java:375)
NMProcess: at weblogic.NodeManager.main(NodeManager.java:31)
Excerpt from nodemanager.log which is created at <WL_HOME>\common\nodemanager:
<Mar 25, 2013 7:21:31 PM> <INFO> <Loading domains file: C:\FusionMW\wlserver_10.3\common\nodemanager\nodemanager.domains>
<Mar 25, 2013 7:21:35 PM> <INFO> <Loading identity key store: FileName=C:/FusionMW/WLSERV~1.3/server\lib\DemoIdentity.jks, Type=jks, PassPhraseUsed=true>
<Mar 25, 2013 7:21:35 PM> <WARNING> <Node manager configuration properties file 'C:\FusionMW\wlserver_10.3\common\nodemanager\nodemanager.properties' not found. Using default settings.>
<Mar 25, 2013 7:21:35 PM> <INFO> <Saving node manager configuration properties to 'C:\FusionMW\wlserver_10.3\common\nodemanager\nodemanager.properties'>
<Mar 25, 2013 7:21:35 PM> <SEVERE> <Fatal error in node manager server>
java.lang.NullPointerException
at java.util.Hashtable.containsKey(Hashtable.java:314)
at weblogic.nodemanager.server.NMServerConfig.initNetworkInfoList(NMServerConfig.java:491)
at weblogic.nodemanager.server.NMServerConfig.getNetworkInfoList(NMServerConfig.java:481)
at weblogic.nodemanager.server.NMServerConfig.getConfigProperties(NMServerConfig.java:545)
at weblogic.nodemanager.server.NMServer.<init>(NMServer.java:154)
at weblogic.nodemanager.server.NMServer.main(NMServer.java:375)
at weblogic.NodeManager.main(NodeManager.java:31)
Please help me out to solve the issue..i tried to start the StartNodeManager.cmd as well as all the services related to it.
But still i am not getting properties file due to which installaltion fails.
Thnks,
Priyadarshini

Check these..It may help you..
http://santoshbidw.wordpress.com/2012/05/12/obiee-11g-installation-11-1-1-6-on-windows-7-64bit-os/
OBIEE 11g installation with Windows 7 SP1 (64 bit)
If corrects your problem ,post the answer for the benifits of other users,
Regards,
veeresh Rayan

Pop up screen not coming for import PO at the time of MIGO

Hi,
I am doing Migo for import PO and not getting Pop-up screen to put commercial IV no., while MIRO is done for custom duties, Pls help me out and tell me the settings related to the same.

Hi,
Follows as below in case of Import procurement.
Step 1)
Maintain J1ID check with following details
1. Material Chapter id Combination & Material Type as well.
2. Maintain Cenvat determination Input & Out put Material.
3. Vendor Excise Details - Excise indicator for vendor 1
4. Plant - Excise indicator for Plant 1
Step 2) Create PO.
Maintain all the condition manually in PO
Such as Custom duty 10%, Edu cess on Custom 2%, SHE cess on Custom 1%, BED equivalent to CVD 10%, Edu cess on CVD 2% and SHE cesson on CVD 1%, AED 4%.
Then in PO assign local vendor for these condition
Step 3) Do MIRO and select planned delivery cost in the selection on MIRO screen & Post the MIRO/ Custom invoice.
Step 4)
Capture Excise invoice with reference to custom / commercial invoice system automatically pops up the window to enter the commercial invoice.
Step 5)
Perform GR during GR system Pops up the window to enter the commercial invoice. There you can enter thsame.
Rg

Laptop screen not coming back on after closing and reopening lid.

I remember having this issue before but cannot seem to find the documentation that i used to fix this previously.
I have a Dell b120 with an intel 915 igp
When i shut the lid and reopen it, the screen remains blank. If i recall, it was something i had to set in the power management.

Upon upgrading to the 2.6.36 kernel, Lenovo S10-3 would not resume after suspend.
Adding 'intel_idle.max_cstate=0' to the kernel boot options makes it work.
Tried that because of: https://bugs.launchpad.net/bugs/634702
May work for other intel graphics cards as well.

Screen not coming back on after phone call??!!

this is a brand new 3g phone. And I have had a 1st Gen iPhone from the original release date.
However, when I make a call and put the phone to my ear, the screen goes black as it should. But upon the conclusion of the call the screen does not come back on until I have locked it and unlocked it again!!
Has this happened to anyone else?

Same thing here!! I was calling my wife and it happened 3 times in a row in a matter of minutes. I rebooted the phone and it went away. Hasn't crept up on me again, yet (knock on wood).
I don't know whether it makes a difference and whether they are technically the same, but I upgraded the firmware that was released 07/10/2008 that is from Apple's Servers from version 5A345 to 5A347 just to see if this fixed any last minute glitches.
I hope this problem never surfaces again. We all paid a lot for these and spent a lot of time waiting for activation.

Brand new MBP 13" screen not coming on

Hi,
I have just bought a MBP 13", and when i tried putting it on yesterday, the screen did not come on. It was a dead black screen. However, the keyboard lit up and the processor warmed up a little as well. Also, the speaker came on with the welcome music.
I have tried this several times but in vain.
Also, i fear that there may be a burning smell being emitted from the back of laptop, from where the warm air is dispensed.
I would be very grateful if someone could please help out with the above said issue.

Hey,
Thanks for the suggestion, but that still did not work out. I took it to a authorized local service center and they too were unable to help. However, I would like to know if it is possible to request for a replacement ? The only problem being that I purchased the laptop in the USA and am currently in India.

Business Place is not coming on Tax G/L line items

Hi,
I want Business Place in business place Field in line item in Tax G/L a/c at the time executing Tcodes-FBL3N and FS10N.Presently this field comes blank except in one plant out of 10.
what r the settings required for this.
Please suggest
Thanks

Hi
While Posting mention the Business Area .
Regards
Arun M

OBIEE 11g Business Intelligence node not appearing in EM

Hi
I am facing problem in OBIEE (11.1.1.7) under EM where the Business Intellgence node is missing. I can see only 3 nodes under Farm_bifoundation_domain
- Application Deployments
- Weblogic Domain
- Metadata Repositories
Thanks.

I'm sorry but the correct answer cannot be simply "don't do that". The catalog shared folders should definitely be available in BI Publisher. They were in version 10, and they should be in version 11.
In my installation, the shared folders were available until I integrated Fusion Piddleware security with Active Directory. With the proper roles set up, my AD user can see the correct folders within the shared folders of the catalog, but only through BI Analytics. When I try to view the exact same folder in BI Publisher, it issues this error to the logs:
[2012-02-26T16:40:27.486-08:00] [AdminServer] [WARNING] [] [oracle.xdo] [tid: 38] [userId: <anonymous>] [ecid: 4d7950b0e2efed24:-582c29db:135b23aefcd:-8000-0000000000005493,0] [APP: bipublisher#11.1.1] Context: 0, code: O9XNZMXB, message: access denied for user to path /shared.
This fragile Oracle system has clearly lost track of the user who is logged in. Evidence of this is also in the log, immediately upon logging in as my user:
[2012-02-26T16:40:05.996-08:00] [AdminServer] [WARNING] [] [oracle.xdo] [tid: 23] [userId: <anonymous>] [ecid: 4d7950b0e2efed24:-582c29db:135b23aefcd:-8000-000000000000547f,0] [APP: bipublisher#11.1.1] java.lang.SecurityException: Security violation: /RAININ/Finance/Month End/Segmentation ad-hoc.xdo, user: *<my_user_name>*, permission: 2240
Clearly it knows my username, because it had some problem giving *<my_user_name>* access to that report in the Month End folder.
Why can't I see the same folder in the Shared Folders through BI Publisher as I can see through BI Analytics? Hmmm?

Action link not working in Direct db request(OBIEE 11g)

Hi all ,
My Requirement.. is...
From direct db request .. i need to navigate to detail report and it should be display the results(detail report results) based on the value,which user click's on the summary report.
For the above requirement ..
I have done below steps..
Summary report(Direct db request) columns:
   Diet no,diet name
   a.I have created a action link on diet no column.
Detail report columns:
   Diet No ,Diet Name,Material Name
   a. I have set diet no as is prompted
when i click on the diet no value in summary report ,we are able to navigate to detail report but it's not filtered based upon diet no value , which i have clicked in summary report.
It is displaying all results(detail report).
Note: if both are normal reports(not direct db request) it's working fine.
If one of the report is direct db request..Action link is not working properly.
Is it action link working in direct db request.........or not
If any one having any ideas pls share me ..
Regards,
Bharath

Hi,
It's known bug. this issue fixed in 11.1.1.7.0 (coming soon).
bug 13852263 - ACTION LINKS - NAVIGATION TO BI REPORTS DOESN'T WORK ( OPEN IN NEW WINDOW)
for now : to uncheck the "Open in New Window" checkbox and go to the detail report in the same Window.
Note: this bug has been fixed by applying the patch 14003822 (u need to get the latest patch)
Thanks
Deva
Edited by: Devarasu R on Feb 14, 2013 4:05 PM

Business Process Graphics are not coming in SOLMAN 3.2

Hi,
In my solman system graphics for business processes are not coming.I am getting an error message "The page cannot be found".
The link is as follows...
http://itssvr.tsm.com:8000/sap/bc/solman/defaultUser/graphic/solmangraphic.htm?sap-language=E&sap-client=100
&_appl=SOLAR&_cmd=READ&_cacheid=032E57B2E
6FDB14188B4313543C5393E
I have checked sap-bc-solman-defaultuser-graphicdata is activated.
Please suggest.
Thanks & Regards
Mrutyunjay

hI,
Go to vtlf copy controls in item data vbrk/vbrp give 001 try this it my work out.
Best regards,
venkataswamy.y

Business Intelligence Screen not coming up in EM in OBIEE 11g

Similar Messages

Maybe you are looking for