BUSINESS LAYER VIEW DISAPPEAR WHEN CREATED

I've created a new Business Layer View but it doesn't exist

Hi....
Same problem I'm facing also, All Business Layer, Data Foundation & Connection folder is disappear,
these folders & files is available in workspace folder but not showing in IDT Local Project Window
I tried to find out on internet but I did not get any reference, even uninstalled Business Object & install in my PC, still same problem,
we are using Business Object 4.1 (Client/Server) both side
Operating System Client : Windows 7
please see attached file
if anyone knows solution please share it, my all work stopped
Regards
Ali

Similar Messages

  • Images Disappear when creating PDF

    When creating a PDF out of InDesign we are having issues with images diappearig when Postscript Overprint / Overprint Preview is on.  When printing images also do not show up. When viewing in Reader Images do not show up.  Has anyone run into this issue, we are running CS3 & CS4.  Any help will be appreciated

    Most likely cause is that the images are set to non-printing in some way, either inidvidually through the Atrributes Panel, or they're on a layer that is set to non-printing.

  • BP view disappears when confirm BP in Identification screen in UTIL_IC role

    Hi Experts,
    As I confirm the BP in identification screen (UTIL_IC role) the BP view disappears while the Technical master data view is there on the screen , even the search results.
    Steps in detail:
    1. Login with UTIL_IC role.
    2. Search for the Business Partner in Identification screen.
    I get the search result and see the technical master data view but BP view is no more there , its all blank.
    What could be the reason. I checked with the component IUICMD, DetailAccount view. It is all perfect as expected. I also checked with the view configuration and I do have entry for
    Page: DETAILACCOUNT
    config key: Default
    component usage: Default
    Object Type: Default
    Object Subtype: Default.
    My concern is that if something is missing in view configration at least default configuration should appear, how could it be blank.
    please let me know if any solution.
    Regards,
    Rahul

    Hello Rahul.
    Check if DO_PREPARE_OUTPUT is redefined in your system for DetailAccount view. If so do you pass iv_first_time to super-class method?[ Here is the thread|Contact Person Standard address data disappears on enter(first time)BP_CONT; where similar issue was discussed.

  • Security Network Layer (SNC) error when creating new session

    in SAPGUI 710, suddenly some users are getting a popup message ("Security Network Layer SNC error") when they use the Create New Session toolbar button.
    SSO works fine when they connect from SAP Logon, its only when attempting to open secondary sessions.  Also, its only some users.
    Where would I find log information resulting from the error?  Or any suggestions on steps to troubleshoot?
    Thanks!

    Hello Erik,
    Issue actually belongs to BC-SEC-SNC, not SAPGUI.
    The attached note advises how to run a trace to get more information about the issue
    150104 collecting dev_trace of user session via SM04
    If you recreate the issue again with the active trace, you might have more sucess with a reply.
    Just to advise that 7.10 is out of support and 7.20 should be used as soon as possible.
    Kind Regards,
    Jude

  • Lab View crashing when creating new bound variable

    Hi,
    I have to connect to an OPC server from Lab view and have played around a bit with the OPC client options.
    I would like to use shared variables as that seems like a handy way to access the needed variables. I have followed the instructions in http://zone.ni.com/devzone/cda/tut/p/id/7450 .
    However when i use the create bound variables feature LabView crashes when i browse for OPC tags, step3 under "Create Shared Variables that Connect to the OPC Tags through the I/O Server". If i try to expand the node "OPC1" LabView crashes. I try to access the built in NI OPC server locally.
    Also during this process LabView gives warning box saying "Configure OPC server to run with an identity of interactive user". we did try the the steps in http://zone.ni.com/reference/en-XX/help/371618G-01/lvdschelp/config_local_opc_serv/ . However the The interactive user button was disabled under NI OPC sever properties.
    Is there something i have missed? Something that needs to be configured before going through that tutorial?
    I run LabView 2011 on a 64 bit Win7P computer. The DSC module and the NI OPC Servers are installed and seem to work (when running the OPC examples ).
    Thanks.

    Hello AmritaNikhil,
    Thanks for the post, I have a few questions for you about this issue.
    What versions of NI OPC Servers are you using?
    Is the server hosted on your local machine or on a remote machine?
    Are you able to successfully connect NI OPC Servers and NI OPC Quick Client?
    Have you been successful in using OPC IO Servers in the past or has this issue occurred since you have started your application?
    Can you consistently reproduce this crash?
    You can try to work around this issue by using Network Items rather than Project Items when creating bound variables in the Create Bound Variables window. Please try this option and let me know if you have any additional information about your application that may be helpful in solving this issue. In addition, I have also included a link to a similar post. Hope this helps!
    LV 2011 crash when create bound variables
    http://forums.ni.com/t5/LabVIEW/LV-2011-crash-when-create-bound-variables/m-p/1879137
    Paul-B
    Applications Engineer
    National Instruments

  • Layer position resets when creating animations

    I'm creating an animated gif from a video clip (cinemagraph). In order to acheive the effect I need, I need to move each layer with the move tool to get an object to stay in the same position. I have gone through layer by layer and used the move tool to move the contents of each layer. When I play the animation I see the layers in the position I put them in. As soon as I stop playing the animation the contents of each layer snap back to their original positions. I have tried using the lock tools (both lock position and lock all) but they don't make a difference. Can anyone tell me why layer positions would reset when creating animations and how to get it to stop?
    Thanks for any help.
    Eric

    It seems from your answer that you're thinking I'm just moving one frame and expecting the rest of them to move automatically (but I'm not sure if that's what you are saying). I have gone through and moved each frame individually and then locked each frame's position individually. When I play the animation and then stop it the layers move back to their original positions.
    I'm also not sure if you're thinking I'm expecting that when I move one image off the layer it will affect the next layer. That's not what I'm expecting. I'm just repositioning the image on each layer to get a particular object to stay in one place (the camera was moving while shooting), so I'm dealin gwith each layer individually.
    Thanks

  • Payment option 'none' disappeared when creating account

    When creating a new iTunes account, the option to select no payment option ('none') has disappeared. The only options available are Visa, Mastercard and Amex.
    Have tried this on both an iPad an an iPhone and the option is not available.
    I've created a number of accounts over the past 2/3 weeks and the option was available then.
    Anyone else having this problem or know what we can do about this?

    Shuttler wrote:
    When creating a new iTunes account, the option to select no payment option ('none') has disappeared.
    This has never been an option when creating a new account.
    After you create the account, None will show up to allow you to remove your CC info.
    If you wish to create an account without a CC, you can do this
    -> Create an iTunes App Store account without a credit card
    I've created a number of accounts over the past 2/3 weeks
    Why?

  • Files disappear when creating a new folder

    I'm new to mac....got a macbook this week. I'm in Iraq so I have very limited access to anything. No internet for my mac at the moment...so I can't update even if there are ones. I assume I have the currenct version of everything though. The question...
    While switching over my files I decided to reorganize them. I'm working on my external HD and creating many new folders for all my files. On numerous occasions now (4) I have created a new file the standard way...right click>new>file...then named it. On these occasions I have done this it has renamed the previous file I had worked in (even though it was not selected) and then the contents of the file disappeared. This leaves me with the new file I created and another identical file of the same name...now with nothing in it. Some of my files I have backed up, but the last one deleted many videos that I didn't. Happens randomly at no particular time. If I select the file and view its contents often it will briefly change its name back to the original name, but still nothing in it. Then next selection of anything will switch it back. Have not been able to fine the files anywhere. Tired of losing my files. Any ideas??? Thanks.

    Hi Craig and Welcome to Apple Discussions....
    First of all, thank you for all you are doing. It's so appreciated! Just be safe and come home soon.
    Now... I have a feeling your external hard drive is the culprit. Read here:
    Changing the names of items
    You can easily change the name of a file, folder, or disk on your computer.
    IMPORTANT: To avoid problems using Mac OS X or applications on your computer, don't move or change the names of folders that came with your system (such as the Library folder or your home). You should also not change the names of applications or items associated with specific applications. If you accidentally change the name of an installed item and you experience problems, you can change the name back.
    Locate the item you want to rename on your desktop or in a Finder window.
    Click the item to select it, then click the name. The name is highlighted and you will be able to edit it.
    Type the new name and press Return.
    Some document names have a file extension, such as ".txt" or ".jpg." If you change the name of a file and delete the extension, some applications may no longer recognize the file. To ensure the file can be recognized by the application that created it, change only the part of the name that comes before the extension, or open the file using the appropriate application, then save the file with a new name.
    You cannot change the name of an item in the Finder window's sidebar. You must locate the item on your desktop or in a Finder window to highlight and change the name.
    And more here:
    Getting information about files and folders
    You can view and modify information about files, applications, and volumes in the Info window. This information can include:
    Comments that Spotlight can search on
    Who can view and modify the item.
    The applications that can open it.
    Metadata that describes a file's contents and how it was created. For example, a photo's Info window may contain the picture's dimensions, exposure time, and the make and model of the camera.
    To see information for one or more items, select the items and choose File > Get Info. An Info window opens for each selected item.
    To see a summary of information about several items, select the items then hold down the Control key as you choose File > Get Summary Info. A window summarizes information on all selected items, including their total size.
    To see information about each item as you select it, select one of the items then hold down the Option key as you choose File > Show Inspector. An Inspector window displays information on the selected item. When you select another item, the Inspector's contents are replaced with information on that item.
    I realize that's a lot to digest and your time might be limited. This is something that only takes a few minutes and might help immediately.
    Go to MacintoshHD/Applications/Utilities and locae Disk Utility. Launch DU, select MacintoshHD in the panel on the left and then click: Repair Disk Permissions. Depending on the size of your drive, it should only take a few minutes. When it's finished, Quit Disk Utility from the Menu.
    Here's how to find out exactly which Mac OS you are running. Click the Apple logo top left of your screen then click, About This Mac. A pane will open. Just under "Mac OS X" will be the version number. ie., 10.4.x
    Reboot your MacBook and see if this helps.... I'm retired and have time... if you need one on one help e-mail me: [email protected]
    It's the least I can do
    Carolyn

  • Design view disappears when I uncheck Restrict Page Occurrence

    Dear Adobe Forms Experts,
    I have an Adobe print form with two master pages: one mailing address page that should only occur once, as the first page, and then the main page, which can occur many times. I have been asked to make the mailing page conditional, based on the company code of the invoice. I followed a very useful discussion on SCN explaining how to do this with a HIDEPAGE global variable, wrapping all the fields on the page in a subform, and doing some FormCalc scripting for the subform.
    I was able to get the page to print as blank when the HIDEPAGE flag was set, but so far I have been unable to get the mailing page to go away altogether.
    I noticed that on the mailing page the "Restrict Page Occurrence" checkbox was checked, and the Min count was set to 1. Well, I thought, that could explain it; I'll just uncheck the "Restrict page Occurrence" checkbox, and all will be right with the world!
    Wrong! When I uncheck that checkbox, the Design View for my mailing master page disappears, and the mailing page never prints, regardless of the state of my HIDEPAGE global variable! When I recheck the checkbox, the design view reappears, and the mailing page goes back to printing a blank page when my HIDEPAGE flag is set.
    What in the world is going on here?! What am I doing wrong?
    Cheers,
    TerryB
    P.S. I am using Adobe LiveCycle Designer 9.0, and I believe the form was originally created using 9.0

    First off, in case anybody reading this in the future has any doubt, I will confirm that this discussion has morphed into the well-worn discussion on how to conditionally hide a page.
    Pavan,
        I am now working on a copy of the original form, so I have the freedom to do whatever I want. First off, thank you for the suggestion of right-clicking on the "data" very-top-level node in the hierarchy view, and selecting "Insert subform". That did the trick for adding the missing design view for my mailing page.
        I am now trying to reduce things to their simplest form, to reduce the number of places I could be going wrong. The mailing master page now contains nothing but a content area (which appears to be required). The design view for my mailing page now contains only two objects: the "D_HIDE_PAGE" flag, (bound to the global field in the interface, where I have put the code to conditionally set the flag), and a subform called "Show_Hide", which is set to "flowed". The flag field is wrapped in the Show_Hide subform. I added the following FormCalc code to the Initialize, form:ready, and layout:ready events of the Show_Hide subform:
    if ($.D_HIDE_PAGE == "X")
    then
    $.presence = "hidden" 
    endif
        When I do a print preview on the form for an invoice that does not set the flag, I see the label for my flag field on the mailing page. When I do a print preview for an invoice that DOES set the flag, I get a completely blank mailing page--but the blank page is NOT being suppressed!
        Just for grins I also tried adding the same FormCalc code to the same 3 events of the top-level subform of the design view (the one I added by right-clicking on the "data" node in the hierarchy view; I called this subform "MAIL_DESIGN"). Same results as before.
        I believe I've followed all the steps laid out in the many SCN discussions on this topic--but obviously I am still missing something. Any clues where I may have gone wrong?
    Cheers,
    TerryB

  • Report Viewer - error when creating connections

    What are the requirements for creating connection to report viewer web part? I'd like to set the parameters with values from a list.
    After...
    Create a blank page
    Add report viewer web part
    Add list web part
    Create connections (in the list Web Part, Connections, Send Row of Data to, Report Viewer = only option available)
    Description:
    An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
    Exception Details: System.ArgumentNullException: Value cannot be null.
    Parameter name: strUrl
    Source Error:
    Server Error in '/' Application.
    Value cannot be null.
    Parameter name: strUrl
    Half Abude Scheidl
    An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
    Stack Trace:
    [ArgumentNullException: Value cannot be null.
    Parameter name: strUrl]
    Microsoft.SharePoint.SPSite.MakeFullUrl(String strUrl) +27695030
    Microsoft.ReportingServices.SharePoint.UI.WebParts.ReportViewerWebPart.OnReportPathFromProvider(Object rowData) +219
    Microsoft.SharePoint.WebPartPages.DataFormWebPart.PrepareAndPerformTransform(Boolean bDeferExecuteTransform) +794
    Microsoft.SharePoint.WebPartPages.DataFormWebPart.PerformSelect() +72
    Microsoft.SharePoint.WebPartPages.DataFormWebPart.DataBind() +346
    Microsoft.SharePoint.WebPartPages.DataFormWebPart.EnsureDataBound() +24
    Microsoft.SharePoint.WebPartPages.DataFormWebPart.CreateChildControls() +712
    Microsoft.SharePoint.WebPartPages.BaseXsltListWebPart.CreateChildControls() +2189
    Microsoft.SharePoint.WebPartPages.WebPartMobileAdapter.CreateChildControls() +72
    System.Web.UI.Control.EnsureChildControls() +132
    Microsoft.SharePoint.WebPartPages.DataFormWebPart.Microsoft.SharePoint.WebPartPages.IConnectionData.GetData() +73
    Microsoft.SharePoint.WebPartPages.SPWebPartManager.BeginWebPartDataFetch() +200
    Microsoft.SharePoint.WebPartPages.SPWebPartManager.ActivateV2ConnectionsAndSharePointDataFetch() +123
    Microsoft.SharePoint.WebPartPages.SPWebPartManager.ActivateConnections() +511
    System.Web.UI.WebControls.WebParts.WebPartManager.OnPageLoadComplete(Object sender, EventArgs e) +70
    System.EventHandler.Invoke(Object sender, EventArgs e) +0
    System.Web.UI.Page.OnLoadComplete(EventArgs e) +11039550
    System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +3160

    If you add a Shared Document list view web part and add connection to the report viewer web part (RVWP), there will be no error. Since when the RVWP gets row from list web part in the connection, it will get data from DocUrl column. And the row passed from
    Shared Document list view wp contains this column, whereas other list view wps don't.
    Datarow passed to RVWP by Shared Document list view wp:

  • Business area is mandatory when creating cost center

    Hi ,
    I have an error while creating cost center. business area is a mandatory field when I am trying to create cost center. I want to make it ( business area ) optional . How it is ?
    Thanks

    hi
    Go to OBC4 select your Field sataus varient in that select G004 ,double click on G004 in that Additional Account assigenment Select Business Area As Optional.it will work
    if your problum is solved pls assign me points
    Regards
    ramana

  • Can't see 23/24 viewer version when creating new folios

    Hi, I have the latest versions of the Folio Builder panel for CS5 (12.4.2.20121107_m_704679) but when I attempt to create a new folio I'm not given the option to choose v23 or 24 folios. 20,21,22 are the only options. Any reason this would happen? Thanks!

    In CS5 and CS5.5, you will also need to upgrade your Folio Producer tools in order to get the latest support for those viewer versions.
    Mac: http://www.adobe.com/support/downloads/collection.jsp?collID=4&platform=Macintosh
    Windows: http://www.adobe.com/support/downloads/collection.jsp?collID=4&platform=Windows

  • Icons disappear when creating a jar file.

    I am trying to make a runable jar file of an application that i wrote however, when i export it from eclipse the icons no longer appear. All of the icons are contained in a class called gridGui. Any help would be great.
    Thanks
         //Creates all of the icon files used for the buttons
         Icon fiftyCents = new ImageIcon("Fifty_Cents.gif");
         Icon oneDollar = new ImageIcon("One_Dollar2.gif");
         Icon twoDollar = new ImageIcon("Two_Dollar.gif");
         Icon threeDollar = new ImageIcon("Three_Dollar.gif");
         Icon fiveDollar = new ImageIcon("Five_Dollar.gif");
         Icon tenDollar = new ImageIcon("Ten_Dollar.gif");
         Icon freePlay = new ImageIcon("Free_Play.gif");
         Icon blank = new ImageIcon("Blank.gif");
         Icon unflipped = new ImageIcon("UnFlipped.gif");
         Icon oneDollarCoupon = new ImageIcon("One_Dollar_Coupon.gif");
         Icon threeDollarCoupon = new ImageIcon("Three_Dollar_Coupon.gif");
         Icon tShirt = new ImageIcon("TShirt.gif");
         Icon youLose = new ImageIcon("You_Lose.gif");

    You are using the ImageIcon constructor that takes a file name argument. When you create the jar file the source for the images are no longer files but entries in your jar file. You have to access them using the ImageIcon constructor that takes a URL argument.
    The actual URL you use is obtained (eg) from the Class method [getResource()|http://java.sun.com/javase/6/docs/api/java/lang/Class.html#getResource(java.lang.String)].
    Suppose your Fifty_Cents.gif was in your jar file in the folder "images" then you could say:
    Icon fiftyCents = new ImageIcon(getClass().getResource("/images/Fifty_Cents.gif");Note the use of forward slashes and the fact that Fifty_Cents.gif has to be capitalised exactly as it is within the jar file.
    There are other ways of organising the resources - see the getResource() documentation for details.

  • Layers disappear when creating a symbol

    Hello,
    I've created a symbol using several layers, however when I play the composition back, nothing is visibile.  What am I missing?  The symbol is made up of 2 lines that sprint out from another object.

    Yes you can edit your symbols. Right click on the element panel and chose edit symbol. Remember that like in Flash, all instances will be changed to the new edit.

  • Stylized type out of indesign disapers when creating pdf

    stylized type out of indesign disappears when creating pdf

    You need to be more specific.
    Are you viewing in Overprint Preview (you should) in InDesign.
    A screenshot would help this.

Maybe you are looking for