Business numbers not found

Dear experts,
I am executing Canada payroll , when executing payroll I got the error"Business numbers not found check account and  registration number configuration
I have configured  Business numbers in  IMG, still i am getting error in KTXDM function...
Please do the need full
Regards
VSR

Business number configuration for Canada Payroll works in two ways.
Option 1: Uses the Personal area of the employee along with Contract field on Infotype 1.
              Business number will be displayed on Infotype 0461 thru 0464 infotypes (Dynamically derived based on the configuration done).
Once the above is setup then when you run paryoll processing the error message should disappear.

Similar Messages

  • SPROXSET ...Unable to rectify Business systems not found issue..

    Hi,
    On doing a test of my proxy I am frustrated with an error " Business system not found". I have maintained SPROXSET values as IFR_aDDRESS = XI.XYZ.COM, IFR_PORT = 51000, IFR_USER = PIAPPLUSER and IFR_PASSWORD = XIPASS.
    I encounter this error whenever I do a test on SPROXY and I can't see the business systems from the SLD. What am I missing here? My sldcheck , sldapicust are all good. The only error in sldcheck is LCR_SAP_BUSINESS_SYSTEMS gives a retuen code fo 4. Please advise on what I am missing here.
    Teresa

    Check RFC destination
    The below links may be useful
    How do you activate ABAP Proxies?
    How do you activate ABAP Proxies? - Activate Proxy
    ABAP Server Proxies - ABAP Server Proxy
    ABAP Proxies in XI(Client Proxy) - ABAP Client Proxy
    BSP a Developer's Journal Part XIV - Consuming WebServices with ABAP
    File to R/3 via ABAP Proxy - ABAP Proxy
    http://help.sap.com/saphelp_nw04/helpdata/en/14/555f3c482a7331e10000000a114084/frameset.htm

  • Getting a "Business partner not found with partner function type requester"

    Hi There,
    After I add a text item to the shopping cart using the SHOP t-code, I get a message "Business partner not found with partner function type requester" What could be causing this and how can I rectify this problem.
    Please help mas this is an urgent issue.
    Thanks,
    Grace

    Hi Grace,
    First check :
    1- transaction : CRM_OM_BP_INTEGRATE
    select org structure where your user is and check that you have green lights (no missing address....)
    2- Run transaction USERS_GEN
    Select check user
    Is everything correct or does the user need to be repaired ?
    Kind regards,
    Yann

  • Business system not found in CPACache

    Sceinario was working fine before XI system crash. After the system is reestablished the scenario not working. Giving RFC error "Service: SAPESRI not found in CPACache" in R3 system
    CPAcache refreshed for dela  as well as full
    Adapter specific identifiers are fine
    SLD cache cleared in IR ID
    Business System name is found in CPAcache
    error repeated
    Business System deleted from SLD. New business system Created. Entire scenario reconstructed. All the above are also fine.
    Still error is repeating.
    Can anybody give a solution for this problem please?
    Regards,
    Venkat

    Hi Venkat,
    The subject of the problem & the problem explanation is varing i.e *Business system not found in CPACache*
    However, the problem still lieing with SLD. So, test the SLD and activate the scenario. Also without refreshing CPA cache you will have to perform execution.
    Regards
    Pothana

  • Business place not found for plant?

    Hi,
    I am facing the below mentioned problem with regard to Business Place with reference to Purchase order for Brazil.
    We are getting error while creating Purchase order."Business place not found for plant 8149"
    can any one has idea on this..
    Thanks
    Venkatesh

    Venkatesh,
    You will need to assign your business place to your plant in config (SPRO->Cross Application components->General Application Functions->Nota Fiscal->CNPJ Business Places->Assign Business Places to Plants).
    The system is trying to derive the business place during PO creation and that is the reason you are getting this error.
    Hope this helps.
    H Narayan

  • Business place not found for plant 8149?

    Hi,
    I am facing the below mentioned problem with regard to Business Place with reference to Purchase order for Brazil.
    We are getting error while creating Purchase order."Business place not found for plant 8149"
    can any one has idea on this..
    Thanks
    Venkatesh

    Hi,
    U can found the business place as below:
    if u r using 4.7 version:
    spro>>financial accouting> Financial accounting global settings>> tax on sales\purchase >>basic settings >> india >> Business place
    if u r using 4.6c version:
    spro>>financial accouting> Financial accounting global settings>> tax on sales\purchase >>basic settings >> settings for tax on sales or purchase  in south koriea >> Define Business place & Assign business place to plant
    hope it helpful for u
    all the best
    Prasad

  • Business number not found

    Hi Girus,
    When I m tring to run the payroll for Canada I m getting following error.
    Business number not found
    Check account and registration number configuration from 1.01.2010 31.01.2010
    I m maintaining 0461,0462,0463,0464 tax infotype for canada.
    Please help me to resolve this isssue.
    Thanks
    Sanju

    Hello Sanju,
    Kindly refer the WIKI document, check whether you have maintained customizing
    https://wiki.sdn.sap.com/wiki/display/ERPHCM/WCB
    Mainly check whether you have maintained WCB A/C no with Rate for the Province , the employee belongs from the following IMG link
    Payroll Canada--> Worker's Compensation --> Set up WCB accounts
    With Regards,
    S.Karthik

  • Transport target for business system not found in System Landscape Director

    Folks,
    We have new installed new PI 7.1 system and importing interfaces from the OLD XI 3.0 system in to new PID 7.1 system.
    We are getting following error when we try to import an interfaces in to new PID system:
    Import failed because of business system transfer object
    Communication component XID_FileSystem: Obligatory
    transport target for business system XID_FileSystem not found in
    System Landscape Directory
    We are yet to install PIQ system.
    All the interfaces in the old XID system have transport target of XIQ system.  I removed the  transport taget for the interface, but transport target is still showing in the Business system under transport target head.
    How can we overcome this issue as we will not have PIQ system atleast for two weeks.
    Thanks in advance,
    Regards
    Chandu

    Hi,
    You need to maintain Transport Groups and target for business systems while SLD transports between your XI system and PI 7.1
    Illustrated with DEv & PRD here.
    Procedure:
    1) Call Integration Builder screen on DEV Server with http://hostname:J2ee Port/rep
    2) Call SLD (System Landscape Directory) Component from the Integration builder
    Save all the Following .zip files on the Local Desktop
    3) Select the Software Component & say Export that you want to Export from DEV
    Server to Production server and which is going to use in the IR of XI
    4) Also Select the Product of the above SWC and say Export
    5) Select the Technical Systems (TS of XI & TS of the SAP R/3) and say Export
    6) Select the Business System(s) & say Export; those are associated with above Exported
    Technical systems.
    In Production Server
    1) Logon to the SLD of the Production Server.
    2) Create a Technical System and Business system which points to the Production SAP R/3
    3) Go to Administration TAB in the main page of SLD
    4) Select the Import option to Import the SWC , PRD, TS,& BS which we Exported Earlier in DEV Server
    5) Click on Browse and select the .zip files that is to Import into Production Server,
    Which were stored on the local desktop at the time of DEV Server Export
    And say Import Selected File Option
    By this we exported and imported the SLD Objects
    Now we have to create transport groups and transport targets in the Production server of SLD
    Creation of Transport Groups
    Edit GroupsGroup1) Select the Business systems 
    2) Click on New Group and give the name of the group as DEV_group & select the
    Corresponding Development serveru2019s integration Server
    3) Similar way create another group for Production serveru2019s business system as
    PRD_group and select the Production serveru2019s integration Server
    Creation of transport targets
    This is to Define which business systems in two different groups correspond to each other
    1) Select each Business system in the SLD and select transport TAB---click on
    Add/Change Target and select its corresponding target business system.
    For Example:
    If you select the business system of Production XI server means
    In the target you have to select group as DEVGROUP and the business system of Development XI server.
    Like this do the same for other business systems also
    Ex:
    BS_PRD_Integration Server----
    BS_DEV_Inetration Server
    How to create Transport Groups & transport Targets
    http://help.sap.com/saphelp_nw04/helpdata/en/ef/a21e3e0987760be10000000a114084/content.htm
    Regards
    Seshagiri

  • OSB Business Service not found

    Hello,
    I'm creating a business service with sbconsole. The enpoint uri is http://localhost:7001/SalesOrders/Order.
    I activate the changes with the change control activate button.
    I'm checking with IE the link and I am getting Error 404--Not Found.
    What am I missing?

    Hi,
    Can you try opening this in your browser http://localhost:7001/SalesOrders/Order?wsdl
    I have an wsdl, and I used it to create a business service
    Are you able to run your Business Service successfully.
    I used the business service to create a proxy service. When I invoke the proxy service, I'm getting BEA-380002 error code, reason Not Found. The routing node of the proxy service can not find the proxy service.
    In your proxy service,under route node please cross check that you are calling the Business Service you created only ?? Or some other service.
    Regards,
    Karan
    Oracle Fusion Middleware Blog

  • DEV- QAS : Obligatory transport target for business system not found

    Hi guys!
    I have read all the other threads about this subject, but since I still have no success, I´m feeling obligated to ask you for a help (deadline approaching fast!)
    I´m trying to transport a Communication Channel, from DEV environment to QAS. I'm having the 'usual' error:
    Import failed because of business system transfer of object Communication Channel * | SIGA | SOAP_SYNC_SENDER: Obligatory transport target for business system SIGA not found in System Landscape Directory
    Here were my steps:
    Keep in mind that in DEV, everything was up and running: Software Component, Product, Technical System and Business System for this name "SIGA".
    1 - In DEV, I created a new Technical System, named "SIGA_QAS", pointing to my QAS server. (Keeping in mind I already had a "SIGA" pointing to my DEV server.)
    2 - Still in DEV, I did create two groups: GROUP_DEV and GROUP_QAS, one points to INTEGRATION_SERVER_DX1 (DEV) and the other INTEGRATION_SERVER_QX1 (QAS).
    3 - Still in DEV, I created the Business System called "SIGA_QAS" also, pointing to my QAS server.
    4 - Still in DEV, I went inside both Business Systems and put: "SIGA_QAS" as TARGET BS of "SIGA" (which automatically puts "SIGA" as SOURCE BS of "SIGA_QAS")
    If I look at my QAS SLD, I can see all of these objects already there, since my BASIS team did activate the 'sync' between these two environments. So, I dont need to create anything 'new' in my QAS SLD, all the objects are there, same as DEV SLD.
    If I try to EXPORT/IMPORT a simple Communication Channel (using file system or even CTS - I tried both) I get the error mentioned above.
    But this is 'wierd' for me, since the error says: "business system SIGA not found in System Landscape Directory", but it is there, in both SLDs.
    Am I missing something here?
    Thanks!
    Ricardo Sancio Lóra
    Brazil

    Hi,
    If you not tried this then try it. Delete the Business System SIGA from Integration Directory in your QAS system and then again import the business system from SLD. Acitvate the changes and then import the CC from Dev to QAS.
    Regards,
    Sarvesh

  • Obligatorytransport target for business system not found in SLD

    Dears,
    We implemented CTS+ in our PI three system landscape.
    While implementation we configured local SLD and after that for dev and QAs we configured a central SLD.
    And for Production we have seprate SLD.
    In DEV SLD we have three buisness systems:
    File_Dummy   of type DEv
    File_Dummy_Q of type QAS
    File_Dummy_P of type PRD
    Now in transport target group of File_Dummy I put File_Dummy_Q and in File_Dummy_Q I put File_Dummy_P but for BS File_Dummy_P target group is empty.
    Now I put all these BS into a request and import them in QAS then I get error:
    Obligatorytransport target for business system File_Dummy_P not found in System Landscape Directory
    Now I am not getting what to put in transport target of File_Dummy_P as it is of type.
    I tried to put their File_Dummy_P but we can not put PRD type BS there.
    I also tried with dev and qas BS there but still same error.
    Please suggest how to resolve this error.
    Regards,
    Shivam

    Hi,
          did you transported the associated technical systems of your business systems....?
    Also I assume you have assoicated the targets foryour business systems in SDL..
    like for D targets are Q and P
    for Q source is D and Target is P
    for P sources are D and Q... if not assoicate the same...
    and also make sure the three groups are available for three environments...
    HTH
    Rajesh

  • Transport Error while transporting ID TR (Target Business System not found)

    Hi Gurus,
    We are facing a issue with transports while transporting a ID transport to Prod from QA.(We are using CTS+)
    Its our first transport to PROD and we have checked the configuration for BC Application Server in Administration ->Content Maintenance and all looks good .
    Our SLD is looks as below
    We have shared SLD for Dev and QA and it looks as below
    Dev's BS has target business system of QA BS
    And in Prod Sld looks like as below
    QA's BS has target business system of Prod BS
    When we transport from Dev To QA transport works fine but when we transport from QA to Prod its gives below error and in error its points that target for  Dev business system is not found in Target SLD.
    We thought we should try to point Dev BS ====>>Prod BS may be that might work work but its also giving error same error.
    Below mentioned is the Error
    class java.rmi.RemoteException:
    ClientServerException exception:Import failed because of business system transfer of object Service   BS_ACN_MDH_DEV:Obligatory transport target for business system BS_ACN_MDH_DEV not found in System Landscape Directory
    com.sap.aii.ib.core.transport.api.TransportCsException: Import failed because of business systemtransfer of object Service   BS_ACN_MDH_DEV: Obligatory transport target for business system BS_ACN_MDH_DEV not found in System Landscape Directory
    #at com.sap.aii.ibdir.server.transport.impl.postprocessing.TransportPostprocessor.postprocessTransport(TransportPostprocessor.java:741)
    #at com.sap.aii.ibdir.server.transport.impl.postprocessing.DirImportPostprocessor.postprocess30Import(DirImportPostprocessor.java:62)
    #at com.sap.aii.ibdir.server.transport.impl.postprocessing.InternalPostprocessingService.postprocess(InternalPostprocessingService.java:205)
    #at com.sap.aii.ibdir.server.transport.impl.postprocessing.PostprocessingService.doPostprocessing(PostprocessingService.java:171)
    #at com.sap.aii.ibdir.server.pvcadapt.XIDirPropagationProvider.transportFinished(XIDirPropagationProvider.java:90)
    #at com.sap.aii.ib.server.transport.impl.pvc.PvcTransport.pvcImport(PvcTransport.java:107)
    #atcom.sap.aii.ibdir.server.transport.impl.pvc.DirPvcTransport.pvcImport(DirPvcTransport.java:74)
    #atcom.sap.aii.ibdir.server.transport.impl.service.InternalDirTransportServiceImpl.pvcImport(InternalDirTransportServiceImpl.java:142)
    #at com.sap.aii.ib.server.transport.impl.service.InternalTransportServiceImpl.importZippedStream(InternalTransportServiceImpl.java:721)
    #at com.sap.aii.ib.server.transport.impl.service.InternalTransportServiceImpl.importXiStream(InternalTransportServiceImpl.java:500)
    #at com.sap.aii.ib.server.transport.impl.service.TransportServiceImpl.importXiStream(TransportServiceImpl.java:265)
    #at com.sap.aii.ib.server.transport.impl.hmi.CmsHmiMethods.process(CmsHmiMethods.java:306)
    #at com.sap.aii.utilxi.hmis.server.HmisServiceImpl.invokeMethod(HmisServiceImpl.java:169)
    #atcom.sap.aii.utilxi.hmis.server.HmisServer.process(HmisServer.java:178)
    #at com.sap.aii.utilxi.hmis.sbeans.HmisBeanImpl.process(HmisBeanImpl.java:86)
    #at com.sap.aii.utilxi.hmis.sbeans.HmisLocalLocalObjectImpl1_0.process(HmisLocalLocalObjectImpl1_0.java:144)
    #at com.sap.aii.utilxi.hmis.web.HmisServletImpl.processRequestByHmiServer(HmisServletImpl.java:290)
    #at com.sap.aii.utilxi.hmis.web.HmisServletImpl.processRequestByHmiServer(HmisServletImpl.java:211)
    #at com.sap.aii.utilxi.hmis.web.workers.HmisInternalClient.doWork(HmisInternalClient.java:70)
    #at com.sap.aii.utilxi.hmis.web.HmisServletImpl.doWork(HmisServletImpl.java:496)
    Can you guys please help out in resolving this error.
    Thanks in Advance.

    Hi,
    I assume you have two SLDs(SLD1 - for Dev and QA , SLD2 - for Prod) and PI 7.0 or XI 3.0.
    In this case the ideal solution would be to
    1. set up a SLD bridge between your Dev/QA SLD and Prod SLD. The bridge basically forwards all the Technical system SLD info to Prod. SLD.
    2. Import Dev business systems information into Prod.
    3. Then create transport target,
    Make sure that you have created Business Groups for Dev/QA/Prod properly
    Edited by: Nageshwar Reddy on Mar 17, 2009 8:29 AM

  • Business content not found for  CRM5.0 Datasources

    Hello,
    I cannot find the business content for the following datasources of CRM 5.0.
    We are on BW 3.5 version and i am unable to find the business content for the below.Did anyone face this problem and is there any solution or we need to build custom info objects and ODS.
    Master data:
    0CRM_LI_CAT_TEXT
    0CRM_LI_ID_ATTR
    0CRM_LI_ID_TEXT
    NOTE: relevant info objects not found.
    Transaction data:
    0CRM_MLI
    Thanks in advance,
    Rao

    HI
    I have checked in my system also. 0CRM_C08 This InfoCube contains date about the CRM activity items. It is based on the Activity Items ODS object (technical name: 0CRM_ACTI).
    As you mentioned  like that The cube is not based on the another cube(0PH_C01). And it is not available in Metadata Repository also.
    May be you are looking in wrong way. Please check it once again.
    Any furhter questions are there please let me know.
    Thanks & Regards,
    Nagaraju.V

  • Java plugin for business objects not found. When trying to modify a business objects query, it says a plugin is required but none are found. What do I need to do?

    I downloaded firefox 4.0 and attempted to use business objects. A screen comes up saying that a plugin is required but when I click on the screen, it say's no plugin is found. I am using the latest version of Java but it seems that the plugin is not there.

    There is workaround.
    Enter “about:config” in the browser’s address bar.
    Search for “html5.parser.enable”.
    Double-click the row to set the value to “false” (row should also go bold to indicate change).
    There is a possibility that it may cause HTML5 compatibility issues down the road but it solved the issue.

  • Business system not found

    What actions should you take if your Business System does not show when attempting to "Transfer from the SLD"?

    Hi,
    The Following things u have to check
    1) Check Whether that BS is already is Assigned to Another Scenario
    2) If it is Assigned to another scenario means, goto Objects TAB -
    Expand Service With out Party
    Business sysemRight click---Add to scenario( Select ur scenario)
    Thie will adds the BS to your scenario also
    3) Do SLD Cache through Envoronment----SLD Cache
    The Process to Assign the BS
    1) Expand Your Config Scenario--Service Without Party-Business SystemRight clickAssign
    2) Say Continue-Say Continue Select ur BS
    3) Un check the Check Box Bottom of the Window
    REgards
    Seshagiri

Maybe you are looking for