Business object and standard workflow for employee training

Hi All,
I have a requirement, where an employee nominates himself to attend a business event type(training) and it goes to his supervisor for approval.
I want to know the business object which can be used for this scenario and any standard workflow.
Thanks and Regards
Balaji E.

If you would have done a little searching you would have found it. You can find all the relevant BOR's in the repository. You can find examples of linkages in SWEHR2 and if the right one isn't there you can create yours in SWEHR3.
Please put in a little effort of your own in stead off taking the easy way out and ask for everything here. Also let us know what you already did to solve your problem so you don't get the answers you already tried.
Regards,
Martin

Similar Messages

  • Business objects and start events required for CO11N and CO13 transactions

    Hi,
    We do production order <b>confirmation</b> and <b>cancellation</b> in CO11N and CO13 respectively. Can somebody please tell me the corresponsing business objects and the start events for them? This is a very urgent issue, I will surely rewad good points.
    I guess we need to use AFVC_PM object and "finalconfirmation" event for the confirmation.
    Please confirm this and kindly suggest the same for cancellation.
    Thanks,
    Max

    Hi Max,
    You will have to use the object BUS2005 - which is for Production order.
    If you do not have Required events in the BO, you will have to extend object to add those custom events e.g. Cancellation event.
    In this case you wil have to use Status management technique for raising events if standad transaction is not raising them.
    Hope following SAP Help link might help you  to start off..
    http://help.sap.com/saphelp_47x200/helpdata/en/c5/e4aed5453d11d189430000e829fbbd/content.htm
    Regards,
    Akshay Bhagwat

  • Any business Object and Events for CJ01?

    hello friends,
    can any one of u tell me the Business Object and Event for the transaction CJ01?
    Could you please let me know is it  business object (BUS2054) is right one. If it is right one please let me know the Event for CJ01?
    Thanks,
    Sridhar

    Hi Sridhar.
    You want to know if there is triggered an event when you create a project.
    Try the following:
    Activate event trace with SWELS.
    Create a project with CJ01.
    Check transaction SWEL to display trace event.
    Regards
    JCD

  • Table for Business Objects and BAPIs

    Hi All,
    Is there any table which correlates a Business Object and all the BAPIs related to it.
    Any pointers in this regard would be helpful.
    Thanks,
    Saher

    hi,
    GOTO SE11-> TOJTB-> give your business object
    You get the list of programs where you are using your business object.
    If a BAPI exists with this business object even that's displayed.
    Regards
    Sharath

  • Standard workflow for FB60 vendor invoice

    Dear experts,
    I am looking for a standard workflow for transaction FB60. Is that WS00400012(BO: BSEG)?
    I just wonder if I could check the link between a transaction and business object.
    In SWO1, BSEG is noted as "Accounting document line item". So i am not sure if it is for Vendor Invoice.

    There are several standard workflows for vendor invoices.  WS00400012 is for release of payment. If that is what you are looking for, it is fine. But go to the customizing to find more information about both the release for payment solution and the release for posting solution from SAP. Can't recall the customizing path now, but it is in Financial Accounting, I think the path is Accunts Receivable and Payable, then Business Transactions, and there you will at least find the Release for Payment part of it. The customizing screens are partly common, but the help available for the customizing nodes is most likely specific for each solution. I have never set up release for posting, so I don't know it.

  • Can i use standard workflow for invoice block ? (BUS2081 . WS20000397)

    Hi Experts ,
    Please any one help me to use the standard workflow for Handlinig invoices blocked(T-code MIRO ). 
    I want an email sent , when  PO invoice is posted and blocked with attched PDF format .
    checked Business object BUS2081 . and Workflow WS20000937.
    But not sure how to use . Please help me to used to get the mail using the standard Workflow .
    Thanks .

    HI
    Iam not pretty much sure about MM or Invoices I found one of the [SAP Help documentation|http://help.sap.com/erp2005_ehp_04/helpdata/EN/0e/0e3b0cb84111d3b5b2006094192bbb/frameset.htm] . This might help you to process ahead.
    Regards
    Pavan

  • Business ByDesign UI: find Business Objects and UI definitions involved

    Hello,
    I am new to SAP Business ByDesign sdk development. The most difficult part is to identify the right Standard SAP Business Objects and use them the right way.
    As I understood from another sdk developer, he has seen on an SAP sdk training that there exists functionality to see/determine in the ByDesign UI the Business Objects and UI definitions involved in a specific UI.
    In a test tennant for a customer this functionality is unavailable.
    - is this functionality released for customer use?
    - how can I activate this functionality myself?
    - what are the prerequisites to be able to use this functionality?
    thank you for your answers in advance,
    Roelof Jan Bouwknegt

    Hi Alexandre,
    have a look at the Web Dynpro component WDR_TEST_EVENTS, view BG_SIMPLE_IN_MPANE, method WDDOMODIFYVIEW.
    Here is a snippet for setting additional customizing or data for a business graphics view-element. Call this from method WDDOMODIFYVIEW.
    DATA lr_bg TYPE REF TO cl_wd_business_graphics.
    DATA lr_bg_method_handler TYPE REF TO if_wd_busin_graphics_mtd_hndl.
    DATA lr_add_cust_xml TYPE REF TO if_ixml_document.
    lr_bg ?= ir_view->get_element(  <your viewid of business graphic>  ).
    lr_bg_method_handler ?= lr_bg->_method_handler.
    lr_add_cust_xml =  get_<your additional customizing/data>.
    lr_bg_method_handler->add_direct_customizing(
    i_customizing = lr_add_cust_xml
    Kind regards,
    Silke

  • Business objects and event type linkages...

    Hi Experts,
    Im a bit confused with business objects (swo1) and event type linkages(swetypv). Ive learned that business objects are used to trigger events and so how does event type linkages related to business object? Do I need to create business object or should I just search/look for the appropriate object needed?Please kindly explain to me the process or steps in using business object and event type linkages in related with idocs.

    Hi,
    Business objects neednot have to be created if your are fine with the standard method they have used in or the events yre available for you. If you need to cusomize it then you have to copy it to a subtype. Then do your modifications in it. Event type linkages are used to say which event is active for a Workflow. And if you want to trigger a Workflow based on certain conditions then you have to use either this or Start of Condition. The Error handling of workflow is also handled by Event Type Linkage. So whenvever you create a event linkage for a workflow you get an entry in Event Type Linkage.
    Hope this would have thrown some light on you.
    Thanks,
    Prashanth

  • Business object attachment to workflow

    Hi all,
    I have a workflow for BO BKPF (accounting document - journal entry).  The book "Practical Workflow for SAP" implies I can attach a reference to an SAP Business Object (page 91).
    For example, in my workflow for accounting document 1000459516, I'd like to attach accounting document 1000459475 (since there are business reasons why the two documents are related).  When I click on the "Create Attachment" button, I presume I need to attach an object of class OBJ, but then I'm not sure what to do next to find 1000459475.
    Any direction you can give will be greatly appreciated.
    Ron K.

    Hello,
    I believe you can create a method in your custom business object (ZBKPF, delegated to standard one) & include your custom code in there to create a new instance with another document number using following procedure:
    1. Create a variable for the object reference. Use the following command to do this:
    DATA <Object> TYPE SWC_OBJECT.
    2. Create the object reference. Use the following command to do this:
    SWC_CREATE_OBJECT <Object> <ObjectType> <ObjectKey>.
    3. Write the object reference into the container using the following macro instruction:
    SWC_SET_ELEMENT <Container> <ContainerElement> <Object>.
    Then this will allow you to have an instance of another document in workflow container & then you can use it as an attachment in any of the steps of workflow you want.
    I hope it helps.
    Regards,
    Shaurya Jain

  • Business Objects and Demand Planning Book

    Has anyone combined the functionality of Business Objects and Demand Planning into a single view?   The requirement is to provide enhanced analytics (near real-time) within DP.  We are on version 5.0.  Ideally, it will a single view (table and graph -similar to standard layout) where both DP and BO are called with the same selection.  I have a method to access the data near real time.  What are the options to acheive this?  Any ideas will be helpful.
    Regards,
    James

    Thanks Dave.  I created a virtual cube in APO to connect BO.  I can retrieve the data fine.  I was wondering if there is a way to integrate BO and the planning book so that I will have one view to see both applications.  For example, I called /zsapapo/sdp94 and get the planning book and BO analytics.  Essentially, I want the BO to replace the standard graphics in the planning book.  So, I would have a table at the top and BO dashboard at the bottom of the planning view.  Any ideas how to achieve this?
    The other question is around using a function module or BAPI to connect a virtual cube to LC to retrieve real time information.  Are you aware of any drawbacks to using a function module or BAPI to retrieve data instead of the DataSource?

  • Link Between Business Object and Transaction

    <b>How is Business Object linked to transactions?</b>
    For example, how is business object BUS2032 (Sales order) linked to transaction VA01 (Create sales order)?

    Hi Ben,
    I'm not sure that you link a business object and a transaction code explicitly. Normally in the business objects methods you have coded what transaction code should be called. Therefore if you use the methods of the business objects it then knows what transaction to call.
    Conversely on the workflow side you will find that down in the depths of the coding for VA01 (as an example) it calls workflow function modules and raises events. When doing so it provides the business object id and key to the business object (i.e. the sales order number). Indirectly I guess the change documents that are raised for most things in SAP like sales documents are uniquely identified and therefore can also be translated to the business object key (e.g. sales documents will have their own change document type).
    A brief example in my 4.6c system can be found in include LIEDPF4C in the form finsta_kontoauszug_buchen with a call to function SAP_WAPI_CREATE_EVENT. You see the the parameter "object_type" has a variable passed to it "objtype_finsta". If you drill back on objtype_finsta you see that is hardcoded to the value BUS4499.
    I guess you could say the developer of the business object knows what transaction codes the business object should use and the developer of the code in the transaction code knows what business objects he should be raising events for if necessary.
    Hope this helps.
    Regards,
    Michael

  • EEWB :  how to determine the business object and the extension type ?

    Hi,
    I ask myself how to determine the business object and the extension type to use to add new fields in a new tab of a specific transaction ? what means each business object, does that correspond to a specific transaction ?
    I need to add a new tab in the ‘BaMI’ business activity in transaction CRMD_ORDER just after the tab 'Actions' at header level.
    Could you help me please to determine which business object and extension type I have to select during creation of the project and which business object category I have to select during creation of the extension (wizard) ?
    Thanks for your help,
    Marie

    Marie,
    In order to determine what type of transaction you are extending, you will need to look at the customizing for the transaction.
    In the IMG:
    Goto:
    Customer Relationship Management->Transactions->Basic Settings->Define Transaction Types.
    You will then choose the transaction defined that you want to extend.  If you display the details of the transaction you will find an attribute called:
    "Leading Transaction Category".  This tells you the general context in which the transaction is used.  The other item to view is the assignment of business transaction categories found in the maintenance screen.
    This information general corresponds to one of the options that the EEWB will give you on the transaction type.
    As far as extensions go, my recommendation is the following:
    - Use CUSTOMER_H Customer Header Extensions for any new fields at the header level.
    - Use CUSTOMER_I Customer Item Extensions for any new fields at the item level.
    Unless you have a specific requirement to extend a segment of the transaction, I recommend placing all new fields in these segments.  The CUSTOMER_H & CUSTOMER_I segments are considered "standard" segments, that are already built into all the necessary API structures. 
    Let me know if you have any further questions.
    Good luck,
    Stephen

  • Business Object and SAP Integration

    All,
    We've BOJ Data Services XI installed.
    Would like to integrate with SAP, does anyone know how or have good information about Business Object and SAP Integration?
    Please adivce.

    Hi Lynn,
    If you need to have Business Objects and SAP work together in conjunction you need to have the Business Objects Integration Kit for SAP. Integration Kit provides the database drivers and other features for reporting off SAP.
    Link to download the useru2019s Guide:
    -     Please go to Http://help.sap.com
    - Click on Business Objects tab
    - Select the product as Integration Kit for SAP
    User guide: Business Objects Integration Kit for SAP Useru2019s Guide.
    I hope that helps you.
    Regards,
    Prashant

  • Business object and BW

    Hi gurus can any one tell the difference between  difference between a Business Object and Business Warehouse.
    Regards
    Arunkumar

    Hi,
    BO is basicallya reporting tool...
    and now BO will be used for reporting on BW.....
    Check these details BW and BO integration..
    follow the link
    www.scribd.com/doc/7805501/BI-BO-Integration
    http://www.jonerp.com/content/view/170/46/
    Have a look at this:
    http://www.businessobjects.com/products/dataintegration/dataintegrator/sap.asp
    This link has lots of PDF documents between SAP and Business object:
    http://www.businessobjects.com/solutions/sap/default.asp
    Also check:
    http://www.dmreview.com/article_sub.cfm?articleId=2839
    http://searchsap.techtarget.com/general/0,295582,sid21_gci1077480,00.html
    check the foll links.
    http://www.businessobjects.com/solutions/sap/
    http://72.14.235.104/search?q=cache:A5mUGEzyGLUJ:www.businessobjects.com/pdf/solutions/xi_sap_insight.pdfBW%26BUSINESSOBJECTS&hl=en&gl=in&ct=clnk&cd=5
    http://www.buisnessobjects.com/news/press/press2003/cust_sapbw_webseminar.asp
    http://www.buisnessobjects.com/solutions/enterprise_solutions/operational_bi.asp
    http://www.businessobjects.com/products/
    http://help.sap.com/saphelp_erp2005/helpdata/en/a4/1be541f321c717e10000000a155106/frameset.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/30/8d27425005ca7ee10000000a1550b0/frameset.htm
    regards
    Venkat...
    Edited by: Venkata Narayana Jakkampudi on Dec 30, 2008 12:57 PM

  • Query on SAP Business Object and Content shipment..

    I know about SAP Business Suite... & SAP Business One... But what is :
    1. SAP Business Object and
    2. Content Shipment
    The definitions on the SAP Release & Maintenance Strategy and other docs on SDN were not too clear for my understanding. I want to know why are they used / where are they applied ? E.g: if you have a SAP BW system.. why would you need SAP BW Content ? where does it fit in the picture and what purpose does it serve...
    (PS: it would be great if someone can share the product / functionality details of their landscape where these systems are used, how does it benefit the business operations and any other purpose of having them... )
    Thanks,

    Hi Ashim,
    If your client want it to be done in one database, then the answer is no if you do not have any add-on or SDK codes.  Most difficult part is authorization since I believe what you mean project here is not the same as project center in B1,
    If your client allow more than one database, then the configuration will be easy.
    Thanks,
    Gordon

Maybe you are looking for