Business Object - BDoc Supported Bo

Hello CRM Gurus,
This question is related to BOL Object layer.
When we create the Business Object of type BDoc Supported,
1.Why is the Write BDoc section of the Business Object becomes disabled with the BDoc name specified in the textbox?
Thanks in Advance.
Cheers,
Vignesh Ravikumar.

hello Vignesh
There will be three kinds of Business Objects in BOL Layer.
1. BDOC Supported Business Objects : When BOL creates a new BO, BOL FWwill use the Read BDOC.And you can not do save for these BOs. Read Only. may be all child BOs can be modelled as BDOC supported.
2. New BDOC Supported Business Objects : These BOs will have Raad BDOC and Write BDOC, so you can read and write. when you save on a Business Object, BOL FW will use the write bdoc.
This will be used at most for all the root Business Objects and independent Business Objects to enable save at run time.
3. BDOC Not supported : as you aware, Unbound Business objects. can be used as helper BOs.
Regards
Shankar

Similar Messages

Looking for SAP business objects technical support

I work for Tractor supply and we have SAP, Business Objects Data integration suite. I am trying to open a case with them for a question about AIX OSlevel compatibility with our version of DI. But I've not been here in a long time and things have changed. Can someone direct me to BO case management?
thank you.

Hi Michael
Support can be accessed at http://support.sap.com. You will need a login to submit an incident. If you don't know what your S-user ID is please contact our customer interaction center. Their info can be found under Help> contact us on the link above.
Hope that helps.
Kristen

Business Object's Support

Hi,
A silly question from my bosses.
Until when is Business Objects XI Release going to be supported?
Thank you.

Hi Luis,
1. Support Life Cycle for Business Objects Enterprise XI will end on 24-March-2009.
2. Support Life Cycle for Business Objects Enterprise XI Release 2 SP 1 will end on 30-Jun-2010.
3. Support Life Cycle for Business Objects Enterprise XI Release 2 SP 2 will end on 30-Jun-2010.
4.Support Life Cycle for Business Objects Enterprise XI SP 2 will end on 24-March-2009.
Hope this helps.
Regards
Ankeet

An unhandled exception has occurred please report this issue to local business objects tech support

hi webi gurus,
can you please help me on above error,
the error is coming while refreshing webi report, the webi report memory is 335 mb and environment is bo 5.1 with client server oracle data base drive
when i try to refresh report below attached error is coming and closing all bo report.

Thanks for that.
By invoke do you mean restart the application ?YES.
Also where would I find the messages log?It is in IDE's userdir
On windows, it is at C:\Documents and Settings\$User\.Creator\2_0\var\log\messages.log
You may want to check out this info on userdir:
http://blogs.sun.com/roller/page/sakthi?entry=what_and_where_is_ide
I am in my first few weeks of useing the IDE.I'm sure your experience with this IDE is going be exciting. Please check out our tutorials, sample apps and other cool stuff on our developer portal
http://developers.sun.com/prodtech/javatools/jscreator/
Wish you Exciting time with Creator,
Sakthi
Regards
Jim

Code for Custom Business Object and Adding/Updating Data

Hi,
I would like to update/insert data thru Custom Business Object to sql Server.Pls let me know is it possible in MSA.If yes I would appreciate if you can share the code/Process in this forum.
Thanks and Regds
Harish

Harish
Depending on what data you update you need to do the following:
If updating SAP tables or customer tables which are an extension of a SAP object like business partner, material, activity or similar:
1. Create the extension of the data object via the easy enhancement workbench (EEWB). This will also create mapping functionality from MSA to CRM Server and extend the BDocs.
2. Go to the BDoc modeler. Find the sBDoc for data exchange (type Write BDoc), that contains your object and check whether the new segment is there.
3. In the Mobile Application Studio (MAS) you can now create a custom business object related to the standard sBDoc mentioned in 2 which is mapped to the new segment. This way the data exchange happens together with the main object
4. Drag & drop the fields of the new BO to a new tile, and link that tile to the existing main object in the UI via the appropriate relation.
If you would create a new business object / BDoc for a set of attributes belonging to a main object and not use an extension of the existing BDoc then the data would get its own flow and when replicating it would not come together with the main data. This can lead to data inconsistencies and in surplus effort administrating this data.
If you have your own objects not related to a SAP object, you can do it the following way:
1. Create your own table(s)
2. Create a Write sBDoc on the table(s)
3. Create BO's on each BDoc segment / table
4. (as above)
Hope this helps,
Kai

Desktop Intelligence support in Business Object Enterprise XI 3.1 version

Hi,
We are using Business Object Enterprise XI 3.1 software in our product. But I heard from SAP sales person that this version of Businesss Objects doesn't Desktop Intelligence. But this version of Business Object is installing Desktop Intelligence version 12.1.0.882 and I'm able to access all the features of Desktop Intelligence.
So please any one confirm me whether the version of Business Object Enterprise XI 3.1 software support Desktop Intelligence or not ?
Thanks in Advance,
Arun

Ramu,
Thanks for your Quick response.
I'm having one mre doubt. As you mentioned I'm able to see the following content in page no: 3 in the document
Products
Desktop
 widgets for SAP BusinessObjects Enterprise XI 3.1
 SAP BusinessObjects Desktop Intelligence XI
 SAP BusinessObjects Web Intelligence Rich Client XI
 SAP BusinessObjects Enterprise XI (Win32 clients)
 SAP BusinessObjects Live Office XI (2)
 BusinessObjectsu2122 Set Architect XI
 BusinessObjectsu2122 Set Analyzer XI
 Crystal Reports 2008
 SAP BusinessObjects XI, integration option for Microsoft SharePoint software (3)
 Universe Builder BusinessObjectsu2122 Data Integrator plug-in
 Universe Builder CWM OLAP plug-in
 Universe Builder CWM Relational plug-in
 Universe Builder DB2 Cube Views plug-in
 Universe Builder DB2 Data Warehouse Center plug-in
 Universe Builder Oracle Data Warehouse plug-in
 Universe Builder Oracle OLAP plug-in
 Query as a Web Service (Win32 client) (1) (2)
(1) Query as a Web Service is available in English only.
(2) .Net Framework 2.0 is a necessary minimum requirement.
(3) Refer to the Platforms support document for u201CSAP BusinessObjects XI, integration option for Microsoft SharePoint softwareu201D. Please visit SAP BusinessObjects Articles.
Server
 SAP BusinessObjects Enterprise XI
 BusinessObjectsu2122 Performance Manager XI
 BusinessObjectsu2122 Predictive Analysis XI
 BusinessObjectsu2122 Process Analysis XI
 BusinessObjectsu2122 Set Analysis XI (server components)
 SAP BusinessObjects Voyager XI
 SAP BusinessObjects Web Intelligence XI
 BusinessObjectsu2122 Xcelsius XI (2)
 Crystal Reports 2008 (server components)
 SAP BusinessObjects Dashboard Builder XI
Is this mean the listed products are installed along with the installation of Business Object XI 3.1 ? Please confirm it.
Regards,
Arun V.

Business Objects Temporary License Keys no longer support OpenSQL

Hello All
Using a Temporary License Key I have been working on a demonstration for a potential customer showing how CR2008 can link to SAP. This has worked perfectly until today when I had to utilize a new Business Objects Temporary License Key. Now when trying to do a refresh I receive the following error message:
Database Connection Error: The license key does not include support of the OpenSQL driver.
Can anyone advise why this is changed and what I can do to be able to demonstrate CR2008 to SAP connection?
Thanks for your input
Phillip

Call Sales and/or Customer Services to get a new keycode.

Supported Operating Systems for Business Objects Enterprise

I am unable to locate information on the supported operating systems platforms for Business Objects Enterprise version (11.0.0.1775) build (1775) within the BO support documentation.
I want to know if this version of BO is supported on AIX (xlC.aix50.rte version 8)?

Not sure which exact version is 11.0.0.1775, but it's definitively BO XI release 1, so I guess this document is your best guide:
http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/a03454bd-a03e-2b10-98b7-fc11486d87bf
And it mentions AIX 5.1 as a minimum so you may be out of luck...

Portals supported for Business Objects

Post Author: izhar
CA Forum: General Feedback
Hi all members, I want to know, just like Sharepoint Portal which are other portals to connect with Business Objects. Which are other portals to be supported with Business Objects? Kindly any member guide here.
Any link having lists of portals supported for Business Objects is welcome.
Regards, Izhar

Post Author: jsanzone
CA Forum: General Feedback
Izhar,
I would suggest going to the Business Objects Support site and doing a search on "portal integration kit" (and before clicking on search, choose your product via the "Products:" indicator, as well as choosing the Document Types of "Kbase Articles", "Product Documentation", and "Technical Papers").

Does OracleAS 10g support business objects

How can I integrate Business Objects(BO) with OracleAS 10g Portal is there some built in portlet or plug in for this... and where can I find documentation for this...
Do you actually need to have a business objects license for each user to be able to run something through the Portal that was created in BO?

Not yet but look for new supported platforms docs when SP3 is released (Mayish). I still think windows 7 will work fine IMO but if you are looking for official testing/support then SP3 should have it.
Regards,
Tim

Business Objects support for international web standards

The NZ government has defined web standards ([Standards web-site|http://webstandards.govt.nz/index.php/Home_page]) for delivery of content over the web. I am working with a government organisation who wants to know how/if Business Objects supports international web standards and if so which and in what manner. This is really around BOE and WebIntelligence primarily. Any help greatly appreciated.
Many thanks
Carl

Hi Carl,
I just quickly took a look these standards you are refering to. They seem to be more in line for web site development - i.e content of nature like most internet web sites.
BOE is an BI applcation delivering BI content is a specilaised environment. I would say it would be difficult to place the default application and capability under the general banner of compliance. However, you would need to map the guidelines to BOE to sus out compliance, but I don't feel it really necessary as you are using an application delivered over the web, not building a website.
Nevertheless, should you prefer, BOE is fully supported by an SDK, so you could develop you own custom interface to meet all those nice compliance issues.
Regards
Jacques

BW support level for Installing business object ?

Appreciate if any body can tell me minimum BW support patch level required for Installing business object ?

Hi,
with respect to some fixes and performance i would recommend the following as minimum.
BW: SAP BW7 with EhP1 and SP5
BO: SAP BO XI 3.1 SP2
Regards
-Seb.

Need toughts on approach. Client moving to Maconomy/Business Objects

Post Author: klokhammer
CA Forum: General Feedback
Hi.On of our important clients are most likely to migrate between economy systems within the next 9 months. Case as follows:
We have developed a budgeting/forecast and reporting system for a certain market/company. The solution is based on a Microsoft SQL 2000 database/server with Microsoft Access as application interface. The solution is integrated and gets actual figures from the economy system Aspect on a IBM iSeries (AS400) system. The "edge" of the system lies in sophisticated budgeting/forecast routines, the report module is rather poor....
The client is now most likely to migrate to Maconomy as the new economy system, and Maconomy AnalytiX as the new BI system (which I understand uses Business Objects.)
We are new to Business Objects and need general recommendations on what level we should try to integrate on. Should we "ditch" all the development done in Access and build a new solutions through Business Objects, keeping all the business logics, but not the interface?
Should we try to integrate on a database level, keeping the interface in Access (for budgeting/forecast), and exporting data into Business Objects to allow reporting through Maconomy AnalytiX?
As you most likely have understood, my knowledge about Business Objects are pretty poor. But please try to give me your thoughts on how we should move along, and what kind of "standard" considerations we must have in mind.
Kind regardsklokhammer

Post Author: jsanzone
CA Forum: General Feedback
klokhammer,
I checked out Macanomy's web site and searched for references to Business Objects, and sure enough it is mentioned here and there. What it sounds like is that Macanomy has developed some "Macanomy Standard Reports" using BusObjects, so if you want these nifty Macanomy reports available to you, you buy the Macanomy product, which is bundled w/ BusObjects, and voila you have the reports. It sounds like a winning strategy. On the other hand, in order to get this type of capability, an organization would have to hire a staff to purchase and install Business Objects, then the staff would have to understand the financial database that the client has established and populated, and then the staff would have to set about building the reports that are needed. With Macanomy, it seems that you get the whole kit and kaboodle in one swoop, which is good for an organization providing that it is on the same wave-length as Macanomy. In regards to your question about what to do with your existing infrastructure, this is a call only you and your client can make. In IT, it's always about the data and how it is used. Peeling back the onion a bit, the process works like this: in order for the Macanomy reports to work, the report must be properly built and it must read from a "universe", which is a BusObjects term for defining the interface between the user and the database (the meta data process). In order for the universe to exist, it must be built by a "Universe Designer". The Universe Designer must have an intracate knowledge of how every table in the database will be used to support the reports that the end-user wants to have (either pre-canned (standard) or ad hoc capability). The database is still a critical piece, and reviewing the Macanomy offering I have a funny feeling that they come in with their own database structure and universe, which makes their process a much quicker install. The downside, as it appears to me, is how you would migrate your existing data into the Macanomy structure (this goes back to the two parties being on the same wavelength). I think in your case it's going to be a matter of ditching your database structure in MS SQL 2000 and Access, and adopting the Macanomy structure, but this may be more painful to do than any one at this point realizes. It sounds like you need to continue arming yourself with knowledge before making any final decisions. Good luck, and perhaps keep all of us posted on your experiences.

Business Objects Enterprise 11.5 FTP Transfer Problem

Hello,
Hopefully someone out there will be familiar with the issue I'm having and be able to provide a solution.
We are running Business Objects Enterprise 11.5 on our Windows 2003 server. I've created and scheduled a job on the server that creates an XLS file containing loan portfolio data that is to be transmitted to a third party client on a monthly basis.
The problem centers around the method of transfer, which is via FTP to a secure site hosted by the client. When executed through Crystal, the FTP actually does achieve a successful login using the credentials the client provided (we have verified this repeatedly by looking at the logs), but the client's server "kicks out" when we attempt any operation on it.
A similar result was produced when we attempted to FTP to the site via the Windows command line. The login was successful, but even a simple command to view the directory "dir" resulted in the connection being rejected. To make a long story short, after reviewing the issue extensively with the client's technical department, our conclusion was that the problem was the result of the FTP sending in "active" mode instead of "passive". We confirmed this by installing a freeware FileZilla on the same server, and switching between active and passive modes (active failed, passive did not).
Their tech people recommended that we contact SAP to get answers to two questions, which I'm hoping someone out there may know:
1) How does Business Objects Enterprise 11.5 execute the FTP process? Is it using its own native logic or simply invoking the command line?
2) Is there any setting with the console that would enable us to modify the FTP settings to send force it to send in passive mode?
Thanks.

Hi,
This is a known limitation. BO only supports active mode for FTP. Refer 1782115 - Which FTP mode is supported as a schedule or publication destination for reference.
If you are able to write a batch file or a program object to transfer a file from a file location to Client FTP, you can try the below workaround.
1. Add the script\batch file as a program object in BO. In the script make sure you include the code to delete the instance after it is successfully transmitted through FTP.
2. Create a File event pointing to the location along with the name of the instance.
3. Schedule the report to the file location with the specific instance name.
4. Schedule the program object based on the file event you created in step 2.
Hope this helps.
Regards
Chinmaya

Problems with Java and Business Objects

Hello everybody, I'm new in BusinessObjects/Crystal Report. Now, I have some problems with Business Objects for Java (Business Objects XI Release 2 Developer). 1) I create a report in the report designer. This report has a parameterfield. Before I run this report within a jsp web application I want fill the parameterfield with some values from the database. I found the following code snippet for this problem in your forum. But it don't works right, because it occurs a simple input field instead of a combo box with my database values. Where is my mistake? I need the combo box! (In debug mode I saw that the parameterfield was filled with my data!)<%@page import="com.crystaldecisions.report.web.viewer.CrystalReportViewer,com.crystaldecisions.sdk.occa.report.application.ReportClientDocument, com.crystaldecisions.sdk.occa.report.application.OpenReportOptions, com.crystaldecisions.sdk.occa.report.lib.ReportSDKExceptionBase, java.io.IOException, java.sql.Connection, java.sql.DriverManager, java.sql.ResultSet, java.sql.SQLException, java.sql.Statement, java.util.Locale, com.crystaldecisions.sdk.occa.report.application.DataDefController, com.crystaldecisions.sdk.occa.report.data.FieldDisplayNameType, com.crystaldecisions.sdk.occa.report.data.ParameterField, com.crystaldecisions.sdk.occa.report.data.ParameterFieldDiscreteValue, com.crystaldecisions.sdk.occa.report.data.Values, com.crystaldecisions.sdk.occa.report.reportsource.IReportSource"%><% try { String reportName = "avoParameterfeld.rpt"; ReportClientDocument clientDoc = (ReportClientDocument) session.getAttribute(reportName); if (clientDoc == null) { // Report can be opened from the relative location specified in the CRConfig.xml, or the report location // tag can be removed to open the reports as Java resources or using an absolute path // (absolute path not recommended for Web applications). clientDoc = new ReportClientDocument(); clientDoc.setReportAppServer("inproc:jrc"); // Open report clientDoc.open(reportName, OpenReportOptions._openAsReadOnly); // Connection Info for fetching the resultSet String connectStr = "jdbc:oracle:thin:@it1srv19:1521:itoracle"; String driverName = "oracle.jdbc.driver.OracleDriver"; String userName = "user"; String password = "password"; // TODO: Ensure this query is valid in your database. An exception will be thrown otherwise. String query = "SELECT DISTINCT AVONR FROM MBDEADM.AVO ORDER BY AVONR"; ResultSet paramData = null; //we will now pass the resultset to the parameter to use as Default Values String parameterName = "AVONR2"; int colIndex = 1; //this is the column in the ResultSet to use as the values // Load JDBC driver for the database that will be queried Class.forName(driverName); Connection connection = DriverManager.getConnection(connectStr, userName, password); Statement statement = connection.createStatement(ResultSet.TYPE_SCROLL_INSENSITIVE , ResultSet.CONCUR_READ_ONLY); paramData = statement.executeQuery(query); DataDefController dataDefController = clientDoc.getDataDefController(); ParameterField origParamField = (ParameterField)dataDefController.getDataDefinition().getParameterFields().findField(parameterName, FieldDisplayNameType.fieldName, Locale.getDefault()); ParameterField newParamField = (ParameterField)origParamField.clone(true); Values newVals = (Values)newParamField.getDefaultValues().clone(true); newVals.clear(); paramData.first(); while(!paramData.isLast()){ ParameterFieldDiscreteValue value = new ParameterFieldDiscreteValue(); value.setValue(paramData.getObject(colIndex)); newVals.add(value); paramData.next(); } dataDefController.getParameterFieldController().modify(origParamField, newParamField); // Store the report document in session session.setAttribute(reportName, clientDoc); } // ****** BEGIN CONNECT CRYSTALREPORTPAGEVIEWER SNIPPET **************** { // Create the CrystalReportViewer object CrystalReportViewer crystalReportPageViewer = new CrystalReportViewer(); // set the reportsource property of the viewer IReportSource reportSource = clientDoc.getReportSource(); crystalReportPageViewer.setReportSource(reportSource); // set viewer attributes crystalReportPageViewer.setOwnPage(true); crystalReportPageViewer.setOwnForm(true); // Apply the viewer preference attributes // Process the report crystalReportPageViewer.processHttpRequest(request, response, application, null); } // ****** END CONNECT CRYSTALREPORTPAGEVIEWER SNIPPET **************** } catch (ReportSDKExceptionBase e) { out.println(e); } %> 2) In a other report I tried to update the data source used by the report at runtime. I used the method 'setDataSource(ResultSet rs, String oldTableAlias, String newTableAlias)' of the 'DatabaseController'. I got a message like this: 'At present in Java reporting Component does not implement'. I use JRC and the docs (http://support.businessobjects.com/global/interactive/xi/om/JRC/default.html) show me this method. Is it not possible to change the data at runtime in JRC? (I tried it with the methods 'setDataSource(IXMLDataSet rs, String oldTableAlias, String newTableAlias)', 'setDataSource(Object newds)', 'setDataSource(IDataSet ds, String oldTableAlias, String newTableAlias)', too. But the result was the same!) 3) I tried to use Business Objects in JSF framework (Ver MyFaces 1.1.3) with the same samples above. But in JSF nothing work! I got the following exception. What is my problem? Can you get me a tutorial for jsf/BusinessObjects? 08:21:43,165 ERROR [[Faces Servlet]] Servlet.service() for servlet Faces Servlet threw exception javax.faces.FacesException: com.businessobjects.reports.sdk.JRCCommunicationAdapter at org.apache.myfaces.context.servlet.ServletExternalContextImpl.dispatch(ServletExternalContextImpl.java:435) at org.apache.myfaces.application.jsp.JspTilesViewHandlerImpl.dispatch(JspTilesViewHandlerImpl.java:233) at org.apache.myfaces.application.jsp.JspTilesViewHandlerImpl.renderView(JspTilesViewHandlerImpl.java:219) at org.apache.myfaces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:384) at javax.faces.webapp.FacesServlet.service(FacesServlet.java:138) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173) at de.itinformatik.mes.web.filter.SynchronizingFilter.doFilter(SynchronizingFilter.java:42) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173) at org.apache.myfaces.webapp.filter.ExtensionsFilter.doFilter(ExtensionsFilter.java:144) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173) at de.itinformatik.mes.web.ajax.aa.AAFilter.doFilter(AAFilter.java:54) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173) at org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:81) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173) at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213) at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178) at org.jboss.web.tomcat.security.CustomPrincipalValve.invoke(CustomPrincipalValve.java:39) at org.jboss.web.tomcat.security.SecurityAssociationValve.invoke(SecurityAssociationValve.java:159) at org.jboss.web.tomcat.security.JaccContextValve.invoke(JaccContextValve.java:59) at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126) at
org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105) at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107) at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148) at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:856) at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:744) at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:527) at org.apache.tomcat.util.net.MasterSlaveWorkerThread.run(MasterSlaveWorkerThread.java:112) at java.lang.Thread.run(Thread.java:595) Caused by: java.lang.ClassCastException: com.businessobjects.reports.sdk.JRCCommunicationAdapter at com.crystaldecisions.sdk.occa.report.application.ReportClientDocumentState.saveContents(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.ReportClientDocumentState.save(Unknown Source) at com.crystaldecisions.xml.serialization.XMLObjectSerializer.save(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.ReportClientDocument.writeExternal(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.AdvancedReportSource.writeExternal(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.NonDCPAdvancedReportSource.writeExternal(Unknown Source) at java.io.ObjectOutputStream.writeExternalData(ObjectOutputStream.java:1304) at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1282) at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1073) at java.io.ObjectOutputStream.writeObject(ObjectOutputStream.java:291) at java.util.Hashtable.writeObject(Hashtable.java:813) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) at java.io.ObjectStreamClass.invokeWriteObject(ObjectStreamClass.java:890) at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:1333) at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1284) at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1073) at java.io.ObjectOutputStream.writeArray(ObjectOutputStream.java:1245) at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1069) at java.io.ObjectOutputStream.writeArray(ObjectOutputStream.java:1245) at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1069) at java.io.ObjectOutputStream.writeObject(ObjectOutputStream.java:291) at java.util.ArrayList.writeObject(ArrayList.java:569) at sun.reflect.GeneratedMethodAccessor669.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) at java.io.ObjectStreamClass.invokeWriteObject(ObjectStreamClass.java:890) at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:1333) at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1284) at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1073) at java.io.ObjectOutputStream.writeArray(ObjectOutputStream.java:1245) at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1069) at java.io.ObjectOutputStream.writeObject(ObjectOutputStream.java:291) at java.util.ArrayList.writeObject(ArrayList.java:569) at sun.reflect.GeneratedMethodAccessor669.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) at java.io.ObjectStreamClass.invokeWriteObject(ObjectStreamClass.java:890) at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:1333) at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1284) at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1073) at java.io.ObjectOutputStream.writeArray(ObjectOutputStream.java:1245) at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1069) at java.io.ObjectOutputStream.writeObject(ObjectOutputStream.java:291) at org.apache.myfaces.application.jsp.JspStateManagerImpl.serializeView(JspStateManagerImpl.java:590) at org.apache.myfaces.application.jsp.JspStateManagerImpl.saveSerializedViewInServletSession(JspStateManagerImpl.java:493) at org.apache.myfaces.application.jsp.JspStateManagerImpl.saveSerializedView(JspStateManagerImpl.java:332) at org.apache.myfaces.taglib.core.ViewTag.doAfterBody(ViewTag.java:122) at org.apache.jsp.testCR_jsp._jspx_meth_f_view_0(org.apache.jsp.testCR_jsp:149) at org.apache.jsp.testCR_jsp._jspService(org.apache.jsp.testCR_jsp:83) at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:97) at javax.servlet.http.HttpServlet.service(HttpServlet.java:810) at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:322) at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314) at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264) at javax.servlet.http.HttpServlet.service(HttpServlet.java:810) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173) at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:672) at org.apache.catalina.core.ApplicationDispatcher.processRequest(ApplicationDispatcher.java:463) at org.apache.catalina.core.ApplicationDispatcher.doForward(ApplicationDispatcher.java:398) at org.apache.catalina.core.ApplicationDispatcher.forward(ApplicationDispatcher.java:301) at org.apache.myfaces.context.servlet.ServletExternalContextImpl.dispatch(ServletExternalContextImpl.java:416) ... 32 more Thanks for your assistance Tosch

Which Business Objects are you referring to.
MS .NET has a thing called Business Objects but they only work in .NET.

Business Object - BDoc Supported Bo

Similar Messages

Maybe you are looking for