Business Object BUS1001 - Material this is the Business object.

Hi All,
I need to activate the notification for the below .
I got the solution,However we do not have any workflow consultant,Would look forward for the step by step procedure to achieve the requirement from you.
Try by activating the workflows for material master Change. -how?
Create Change pointers, Where can i get this? so that they trigger an event or notification when there is a price change more than 40 % in the Material master....
BUS1001 - Material this is the Business object?
I would need a detailed procedure for the above.

My step plan in your case would look like this:
Step 1: Hire workflow consultant.
Step 2: Give him the requirements
Step 3: Wait for result
Step 4: Test the workflow.
Or as an alternative you can search the forum because change documents have been discussed here many times.
Regards,
Martin

Similar Messages

"there was an error opening this document the root object is missing or invalid" adobe reader 9

I get the following message every time I try an open some of my saved PDF files in Adobe Reader 9
"there was an error opening this document. the root object is missing or invalid."
these files are not down loaded from a website, they are files I greated some time back and I have not opened in a while.
I am runing window XP and this dos not happen with all my PDF files.
can you help.
James

Sounds like the files are corrupt. Time to restore them from a good backup.

What is the use for lock object and how to use the lock objects

Hi Guru's,
I am new to ABAP .Can you please clarify the that what is the use of lock object and how to use the loct object .what is use of the Deque & Enque function modules .

hi ,
below are some minfo about lock objects :
Lock Objects
These types of objects are used for locking the access to database records in table. This mechanism is used to enforce data integrity that is two users cannot update the same data at the same time. With lock objects you can lock table-field or whole table.
In a system where many users can access the same data, it becomes necessary to control the access to the data. In R/3 system this access control is built-in on database tables. Developers can also lock objects over table records.
To lock an object you need to call standard functions, which are automatically generated while defining the lock object in ABAP/4 dictionary. This locking system is independent of the locking mechanism used by the R/3 system. This mechanism also defines LUW i.e. Logical Unit of Work. Whenever an object is locked, either by in built locking mechanism or by function modules, it creates corresponding entry in global system table i.e. table is locked. The system automatically releases the lock at the end of transaction. The LUW starts when a lock entry is created in the system table and ends when the lock is released.
Creating Lock Objects
Lock object is an aggregated dictionary object and can be defined by using the following steps:
o From initial data dictionary screen, enter the name for the object, Click Lock object radiobutton and then click on Create. The system displays a dialog box for Maintain Lock Objects screen
o Enter short text as usual and the name for primary table.
-Save
-Select Tables option
From this screen you can:
Select secondary tables, if any, linked by foreign key relationship.
Fields for the lock objects. This option allows you to select fields for objects (R/3 system allows locking up to record level). Lock object argument are not selected by user but are imposed by the system and includes all the primary keys for the table.
1) Exclusive lock: The locked data can only be displayed or edited by a single user. A request for another exclusive lock or for a shared lock is rejected.
2) Shared lock: More than one user can access the locked data at the same time in display mode. A request for another shared lock is accepted, even if it comes from another user. An exclusive lock is rejected.
3) Exclusive but not cumulative: Exclusive locks can be requested several times from the same transaction and are processed successively. In contrast, exclusive but not cumulative locks can be called only once from the same transaction. All other lock requests are rejected.
Also, last but not the least, locking the object is logical (locking with any enqueue ) .so, you have to use the lock object while trying to access from second program .
reward if helpful ,
Regards,
Ranjita

Object 'BTMP::0ANALYSIS_PATTERN' refers to the invalid object 'QU::'

Hi friends,
i have faced this problem why installing portal content theme and getting this error object 'Object 'BTMP::0ANALYSIS_PATTERN' refers to the invalid object 'QU::'. please reply me as soon as possible.

Hi Viral
how did you reslve ths issue??

Business Content Objects on BI side for the business content data sources

Hi All,
We are doing a fresh implementation, and would like to know the step by step way through which i can know the relevant business content objects on BW side for a BC data sources ,,,,,
0material_attr
and 0mat_sales_Attrt
As Per my understanding, once installed the BC data sources, the data would be feed to the master data info object 0material
But the question is how do i know the complete Business content object on BW / BI side, and use the same building the entire flow.
I have a hint that we can know it through the help.sap.com, and it would be highly appreciated and awarded for your expertises guidence, i have tried sercing in it, but dont know the correct trick.
Even for the other business content data sources.
Example, the relevant infoobject or the DSO or the Cube,transformation, dtp,etc..
Thanks
Daljeet sing Nagi

Hi Vineeth,
Do you mean this way in the meta data repository, it will propose the flow for the business content object, and if yes, then even if they are in delivery version and not in active version, still it shall propose the flow for the business content objects,
And to cut short my requirement, as specified we are doing the fresh implementation,
and i have identified that we would require first to load the material master data, and based on our present requirement, the data source which i have identified are
0material_attr (for the table mara in ECC system)
0mat_sales_attr (for the table mvke in ECC system)
all the fields data would be loaded to which master data info object,
will it be 0material or ????
Thanks for your support and surly as promised

Authorization Object for "Install" button in the Business Content

Hi..
Is there an Authorization Object which controls the "Install" button in the
RSA1 -> Business Content tab
I want to restrict developers to Install business content in BW Quality client and BW Production client.
If a developer clicks the "Install" button, in the Business Content, it should say, "You do not have authorization for the Administrator Workbench Object".
Is there any Authorization Object for this?
Thanks,
Sai.

Its better you go for SE16 and type table name TOBJT, and try to serach for required auth object.

MDM Business Pacake for Material Master

HI All,
Is there any busniness package exists in MDM for Material Master. Please provide some info on this. I got this requirement from my client team.
If not provide me some link where i can look for what are differerent modules of SAP MDM business package.
Thanks
Supriya.

Hi Supriya,
To find the MDM Business Content you will need to go to the [SMP|https://websmp104.sap-ag.de/support] and go to:
Support Packages and Patches -> Entry by Application Group -> SAP NetWeaver -> SAP MDM -> SAP NETWEAVER MDM 7.1 -> Entry by Component -> Business Content
Please note - this is the Business Content for MDM 7.1, for MDM 5.5 go to:
Support Packages and Patches -> Entry by Application Group-> SAP NetWeaver-> SAP MDM-> SAP MDM 5.5-> Entry by Component-> Master Data Server-> MDM BUSINESS CONTENT 5.5.
Hope this infromation helps,
Idan

Extend the Material Code from One Business Area to other Business Area.

Dear All,
I have create some material codes in a business area XYZ with Storage Location AA11 in Company code ABC. There is another business area PQR with Storage Location BB22 in Company code ABC. How can I extend the Material Codes of the Business Area XYZ with Storage Location AA11 to Business Area PQR with Storage Location BB22 through LSMW.
I am waiting your reply.
Regards,
Hemang

To extend material masters you can use anyone of the SAP given import methods in LSMW.
But I am a bit confused with the terms you are using, what do you mean by business area? and a material master is not created per company, the company is not among the organisation levels.
Are you talking about plant and sales area?

Inheriting the Business Objects

We have BO object BUS2089 which is inherited to ZBUS2089.
Zbus2089 has the method Manager_Det.
A new BO object ZBus2089_new has been created which inherits Zbus2089.
Zbus2089_new changes the method Manager_Det.
and in Event linkages.
WF1 ---BUS2089 --- Created
WF2---Zbus2089_new -- Created
I now manually trigger the BO object Zbus2089_new and event Created.
Depending on teh start conditions either of the WF is triggered.
When WF2 is triggered the Manager is determined based on the logic written in Method_Det of Zbus2089_new.
When WF1 is triggered how is the manager determined?
Does it utilize the code of Manager_Det of Zbus2089_new or Manager_Det of Zbus2089.
Please advice.
Edited by: kittu reddy on Oct 30, 2009 12:22 PM
Edited by: kittu reddy on Oct 30, 2009 12:24 PM

Kittu,
The short answer is "delegation". Long answer:
It depends if you have delegated from the original object type to your Z object type. If you have delegated, then even though the original object is called in your workflow, it will use any new code in your Z object type. If you changed the code of an existing method in the Z object type, you should have used the "redefine" feature. (I don't know if it is possible to just change it otherwise or if that matters anyway).
You can find out if the original object delegates to your Z object type as follows: Access the original object type in the BOR. Click on the header icon, then go to tab labeled "Customizing". Look at field labeled "Delegation type". You should see your Z object type in that field, that means it is delegated. If the field is blank it is not delegated and your WF1 should be running only the original code, I think.
Hope this helps,
Margaret

Federating the Business explorer role

Recently we have successfully federated some reports for some business users. Now another business group is interested in federating the Business explorer role. They would like to take advantage of the BexWebanayzer iview and a few of its features. They want the ability to personalize (change the columns and filteringu2026) a report and save it in their personal Portfolio area in KM on the producer. I'm having some issues federating that iview and the business explorer role. Is anyone aware of any other SAP users that have federated the Business explorer role?
Along with federating the role the users would like to hide 2 of the tabs within the popup iview of the "save as" in the BexWebAnalyzer iview . I don't know if this is even possible to modify the popup and I can't seem to find that popup object/iview.
Thanks, any info is appreciated.
Jim

Hey @ All,
how did you install the EP? What kind of Usagetype did you select?
To have the BI content installed to the EP you need to install the BI usagetype as well. So in SAPinstaller you have to check the marks properly.
If you have installed only the EP usagetype you are able to reinstall the BI usagetype afterwards. As far as I know you can start the SAPinstaller again and set the right checkmarks.
The BI (usagetype) content needs a WEBAS Java and EP installed.
Hope this explanation helped a little... if so points are very welcome since i am starting from scratch!
kind regards
Tobi

BO 4.1 SP4 IDT - Not able to publish the Business layer onto the repository

Hi All,
We are facing issues while publishing the Universe onto the repository. Just to give a background of the issue, we are connecting to Oracle 9i database from BO 4.1 SP4 Information Design Tool. We have client tools installed on one VM server and BO enterprise server on the other VM . I have installed Oracle 11g client 32 bit on the client tools server and 64 bit on BO Enterprise server. I can create a session to the BO server from the IDT tool successfully I have even created a secured connection published on SAP BO server which means there are no port issues.
I create the data foundation and business layer on IDT. I have created a test one with only two simple tables and do an integrity check and it works fine. When I publish the Universe, after I click the Finish button, it just freezes and doesnt get anything back for a long time. After that period, the finish button gets enabled again and if I check on the server, Universe is not published.
Based on the KB 1586166 - How to enable tracing for BI4.x client applications I created two BO_Trace.ini file in the following directories:
C:\<user-dir>\.businessobjects\bimodeler_14\config
D:\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\conf
I was getting the trace files earlier as well but I just changed to see if something happens. I I have a hs_error_pid4198 file created on monday, but it seems to be a java environment error file. I am not sure if its related. The trace I see on the InformationDesignTool_ncs file is
trc file: "InformationDesignTool_ncs.trc", trc level: 1, release: "720"
M
M [Thr 5788] Thu Aug 21 11:09:28 2014
M [Thr 5788] NCS trace timer thread is successfully triggered
M [Thr 5788] Trace dispatcher thread is successfully triggered
M [Thr 5788] NCS data timer thread is successfully triggered
M [Thr 5788] Data dispatcher thread is successfully triggered
M [Thr 5788] NCS library version 2.3.9 (unicode) loaded
M [Thr 5788] NCS_ProcInit API invoked
M
M [Thr 5052] Thu Aug 21 11:09:33 2014
M [Thr 5052] ***LOG Q0I=> NiBufIConnect: connection pending after 500ms: connect (10035: WSAEWOULDBLOCK: Resource temporarily unavailable) [nibuf.cpp 4634]
M [Thr 5052] *** ERROR => NiBufIConnect: non-buffered connect pending after 500ms (hdl 1;127.0.0.1:59818) [nibuf.cpp 4645]
M [Thr 5052] *** ERROR => NI raw handle failed to be initilized at IDEL to CONNECTED, connection to agent destination failed to be established in agent 1 [ncsmtdatasen 137]
M
M [Thr 5740] Thu Aug 21 11:10:28 2014
M [Thr 5740] *** ERROR => NI raw handle failed to be initilized at IDEL to CONNECTED, connection to agent destination failed to be established in agent 1 [ncsmtdatasen 137]
M
M [Thr 2428] Thu Aug 21 11:53:19 2014
M [Thr 2428] NCS_ProcExit API started
M
M [Thr 2428] Thu Aug 21 11:53:20 2014
M [Thr 2428] Timer threads are successfully finished
M [Thr 2428] Data sending threads are successfully finished
M
M [Thr 2428] Thu Aug 21 11:53:21 2014
M [Thr 2428] NCS_ProcExit API invoked
Initially I was getting the following error on 18 Aug 14
FILE_TYPE:DAAA96DE-B0FB-4c6e-AF7B-A445F5BF9BE2
ENCODING:UTF-8
RECORD_SEPARATOR:30
COLUMN_SEPARATOR:124
ESC_CHARACTER:27
COLUMNS:Location|Guid|Time|Tzone|Trace|Log|Importance|Severity|Exception|DeviceName|ProcessID|ThreadID|ThreadName|ScopeTag|MajorTick|MinorTick|MajorDepth|MinorDepth|RootName|RootID|CallerName|CallerID|CalleeName|CalleeID|ActionID|DSRRootContextID|DSRTransaction|DSRConnection|DSRCounter|User|ArchitectComponent|DeveloperComponent|Administrator|Unit|CSNComponent|Text
SEVERITY_MAP: |None| |Success|W|Warning|E|Error|A|Assertion
HEADER_END
|3E293DA41362474BA0789573468E97B20|2014 08 18 16:44:52.105|+1000|Error| |>>|E| |idt| 4168| 1|main | ||||||||||||||||||||||Cannot read TraceLog configuration file 'conf/tracelog.ini'.-
|3E293DA41362474BA0789573468E97B21|2014 08 18 16:46:02.808|+1000|Error| |==|E| |idt| 4168| 40|Check integrity CIR 01401| ||||||||||||||||||||com.businessobjects.mds.services.parser.decoder.DataFoundationSQLDecoder||DataFoundationSQLDecoder.decodeExpression: encodedExpression is null-
I am not seeing this error after I created the tracelog file .ini based on the KB mentioned. I have a trace file generated in the workspace folder but its 12MB size which I wont be able to post it here.
Any suggestions to resolve this error would be of great help.
Regards,
Rohini.

Hi
Follow the below steps: Publish the Universe to the Repository.
Select the business layer under project -> Right Click the Business Layer and select, publish repository from the menu. -> and next --> Choose the Repository Folder to store the Universe --> Publish Universe After clicking the “Finish” button
Note : Ensure the Connection for the corresponding Data Foundation is a Secure Connection.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/903a7fc7-19e8-2d10-fa95-b050de946b61?overridelayout=true
http://www.youtube.com/watch?v=4lvrKex4ubc

Busy cursor - two cursors displayed over the TextField

Hi all,
first I describe the situation. When busy cursor is activated in Flex application, when the service is loading data from backend, then the clock or whatever you set can be displayed instead of the mouse arrow icon. But when you are over the TextField, then the busy cursor is displayed and over the busy cursor the additional "text input cursor" is displayed.
1) Is it possible to get rid of that "text cursor" in the case when busy cursor is activated ? That means show only busy cursor like in other cases.
2) Is it possible to override CursorManager ? As I did not found any events in the interface.
Or what could be the solution to this ?
I did not found any solution like this anywhere. I know how to set my own icon to the cursor, how to start and stop busy cursor manually. But how to override adding the text cursor to the scene only for the case when busy cursor is started and the Service is loading the items from backend and you are over some text component?
thanks
regards
Michal.

No, it's not mobile app.
I use SDK 4.5.0
By text components I mean TextInput for example, but it happens at all the places where "text cursor" is displayed.
You can check the behavior in the following blog article, when you try the first example and press Toggle button to activate busy cursor and hover the text below. This is exactly what I want to avoid. Two cursors displayed. I don't know what is the version used in the article, but the same happens in 4.5.0
http://www.flex-blog.com/set-busy-cursor-using-the-cursormanager/
regards
Michal.

Capturing information from the Resource Object forms

Hello,
I'd like to capture information (dburl, dbdriver,username and password) from my resource objects to use in a class i'm developing through the API.
However, I failed to find any methods in API to get this information... does anyone know how to retrieve this?
Thanks in advance,
Tomic

Hi,
I am not very clear about your question.The information below is usually store in IT Resource.If these information is store in IT Resource you can use tcITResourceInstanceOperationsIntf.
What is your business drive for getting this information from resource object form.Can you explain me so that I can have better answer.
Regards
Nitesh

Access schema objects without having to specify the user.

I've just created a role in a schema and assigned some priveleges.Then I created a user and granted the role to it. But as the newly created user is not the owner of the schema when I say a simle select query like this:
SELECT EMLOYEENAME FROM EMPLOYEES
I get "table or view does not exist" error. Is there a way I can wirte refer to objects in this schema without having to indicate the owner. So instead of writing SCOT.EMPLOYEES I want to write just EMPLOYEES.

>
I get "table or view does not exist" error. Is there a way I can wirte refer to objects in this schema without having to indicate the owner. So instead of writing SCOT.EMPLOYEES I want to write just EMPLOYEES.
>
Create a public synonym for the object.
CREATE PUBLIC SYNONYM EMP32 FOR SCOTT.EMP;Then you do not need to specify the schema.
--- edited to add doc reference
See CREATE SYNONYM in the SQL Language doc
http://docs.oracle.com/cd/B28359_01/server.111/b28286/statements_7001.htm
>
CREATE SYNONYM Purpose
Use the CREATE SYNONYM statement to create a synonym, which is an alternative name for a table, view, sequence, operator, procedure, stored function, package, materialized view, Java class schema object, user-defined object type, or another synonym. A synonym places a dependency on its target object and becomes invalid if the target object is changed or dropped.
>
Edited by: rp0428 on Apr 5, 2012 10:56 PM

Block from key in business area for company do not have business area

Dear experts,
How can I do a validation rule to block from key in business area for company do not have business area?
Kindly advice.
tks!

Hi,
One option, you can create role via Tcode PFCG for each user/company which do not have business area. You can disable the business area in authorization tab.
One more option you can greyed or freezed the business area field for the company which do not have the business area by using Tcode OBC4. You can suppress the business area field for each GL that been used by the company code. In other words, you create special field status group for the company and suppress the business area.
Hope this will help you.
TQ
Regards,
Nazrul

Business Object BUS1001 - Material this is the Business object.

Similar Messages

Maybe you are looking for