Business Object for asset accounting/capitalization

Hello frineds,
I need to develop a work flow to notify IO owner when IO status changes to RELEASED.
my workflow needs to be triggered once we save the internal order.
1) I am not getting any Business Object for this asset accounting. do u have any suggestion?
2) Can u tell me how to save the internal order through which my workflow is getting triggered?
My requirement is to use the transaction * CJ92 , CJ20N, ko02 or ko04 * for changing the IO status to released.
Thanks,
Romanch

Hi,
In the transaction KO02, U can find one tab Control data, In that Control data tab u can change the status to released.
Thanks and Regards,
Chandra M

Similar Messages

Install Business Content for Asset Accounting

Hi All
I am not able to install business content for Asset Accounting. I collected oFIAA info area with data flow before and afterwards and mode automatic. I checked the boxes for info objects, DSO multi providers etc and clicked installation and transport so as to get a transport request which I want to transport to production if all is well. It is prompting for a request which is already present and not allowing to change. I cancelled this process, created a new request in transport organizer and assigned the installation to this request. But afterwards it again prompted for the previous request and I aborted the process. What should I do to install the content as I don't want to transport a previous request since I didn't create it and I don't know what will happen if I transport. Sorry for the long story.
Regards
Subin

Some objects were already locked in the request , that could be the reason why It was prompting previous request number
Goto that request in SE09/SE10 - Remove the objects from the tasks or
Goto SE03 - Unlock Objects (Expert Tool) - enter request number and unlock all the objects from the request
Now goto Bus.content - Install and when it prompts for request enter new one
Note : I would suggest you to remove all the unwanted objects from old request though they are unlocked , In future it will be a problem if someone tries to use that request , or change description to do not transport so will people will think about this request not to use and transport

Error - No GL account selected for Asset account in Business partner master

Hi Experts,
Scenario - While adding A/P Invoice for Asset item, the error "Error - No GL account selected for Asset account in Business partner master Message (3518-13)
Awaiting your replies
Regards,
Sid

Hi,
You need to map the control account of that vendor(business partner).
->Open the respective Business Partner master data
->Under accounting tab
->Under General tab
->Control accounts (will be indicated with ... button),on opening this
->You will be prompted to map the control accounts
                                         ^ Down Payment Payables
                                         ^Assets Account
                                         ^Open Debts
Here you need to map the Asset account which also must be a control account(control account option should be checked in the chart of accounts).
Pls do check in the test system,understand the behavior of this account by booking ap invoice and payment,then proceed in the live system.
Hope this is helpful

No G/L account selected for Asset Account in Business Partner Master Data

Hi All,
When i tried to raise A/P invoice for an Asset Item the system is raised the following error" why?
" No G/L account is selected for Asset Account in Business Partner master data "
thanks
SV Reddy

hi Giri,
When you choose from list against the Asset Account in the business partner master data it is only displaying the Trade Creditors Account domestic and foreign acounts only. which one to choose in this case? i presume trade creditors account is the one to choose. but what is the logic for asset items to choose this Trade Creditors Account? Or else can we create a separate control account for purchasing the Asset items? what is the logic again here choosing a separate account through option create new ?
thanks
SV Reddy

Creation of Generic business Object for a standard transaction

Hi,
We have a requirement where we are depreciating the assets (standard transaction ABAA) using a custom BDC program. We need to maintain a history (called audit trail) for the particular asset that has been depreciated using this program. For this audit train we have been asked to use "Generic Business Object" in transaction code ABAA.
Unfortunately, Generic object services are not available in this transaction code. Can you please suggest me how to create "Generic Business Object" for a particular standard transaction code. Also, we have show the details of custom workflow that follows the approval process in order to depreciate the asset. how to show this workflow details using Generic Business Object. This is a very critical issue, any help will be very help ful.
Please let me know should you require more information on this topic.
Thanks,
Ashish

this is already answered in the forum, and also explained in the sap library

Create a business object for a Maintenance object

Hello,
I want to create a business object for a maintenance object to change all XML attributes to XML elements.
Should I have to change the whole XML Schema from attributes to elements one by one?
For example, I create the business object CM_Person_BO for the maintenance object Person, and use the business object to add user in a more standard way.
But it is a quite large job to rewrite the whole schema for the maintenance object Person, which has following elements, which are PersonIdentifiers, PersonNames, PersonPhones, PersonCharacteristics, Person and SeasAddress.
Is there any easy way to do it?
Thanks,
Kerr

Should I have to change the whole XML Schema from attributes to elements one by one?
Is there any easy way to do it?Unfortunately not, you will have to define the schema containing each field/element, once. The primary objective is that you should create a scaled down version of the BO having only the required fields or subset of available fields, you may not need all the fields of a MO. This increases performance as the IO is performed only for specified fields in the BO.
You can define separate Data Areas for each Person object's context, i.e. Identifiers, Names, Phones, etc. and include them (includeDA) within the Person BO (CM_Person_BO) for clarity.

Business Package for Asset Services, implementation & integration

Hello,
We have installed Business Package for Asset Services in EP6.0 and integrated it with back-end system. The package works fine but on some iViews (equipmentpartners, functionallocationpartners, equipment, functionallocation, configurationshow) we have following runtime error:
Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/com.sap.portal.migrated/ep_5.0/roles/com.sap.pct.eservice.operator/eservice/nf/InstallationManagm/com.sap.pct.eservice.partners.equipmentpartners
Component Name : null
Page could not create the iView.
See the details for the exception ID in the log file
Im novice in SAP EP and need help, can anyone help me please?
Best Regards
Raka

Dear Ranko and others,
The problem lies in the lowercase and uppercase of the specific shared ressources within the deployed file default.properties of the business partner. Also the link to the PDV isnt the same anymore.
I had the same problems and by analyzing the logs of the nwa I found this solution. Donwload the files and replace the names with lowercase and making the reference to th PDV as well. Then upload this packaged PAR file again.
Best regards
Henrik Koch

Business object for PO and SWOTICE entries

Hi all,
We've copied the standard business object for a PO - BUS2012 to a Z object to be used in a workflow. In one of the methods for this Z object, we've used BAPI_PO_CHANGE to block an item of the PO. As soon as the program was generated, under the object list of the transport request for these changes, some entries got created for table SWOTICE -
    BAPIADDRESS
    BAPIEKET
    BAPIEKKN
    BAPIEKKOA
    BAPIEKKOC
    BAPIEKKOP
    BAPIEKPOA
    BAPIEKPOC
    BAPIEKPOTX
    BAPIESKLC
    BAPIESLLC
    BAPIESLLTX
    BAPIESUCC
    BAPIESUHC
    BAPIMMPARA
    BAPIRETURN
    BAPIEKKO
    BAPIEKKOL
    BAPIEKPO
    BAPIEKAN
    BAPIEKBE
    BAPIEKBES
    BAPIEKES
    BAPIEKKOTX
    BAPIESKL
    BAPIESLL
    BAPIESUC
    BAPIESUH
    BAPIRLCOPO
    BAPIRLGNPO
SWOTICE - index of frozen DDIC structures.
What is the significance of this table and items? Why did they appear in the object list of the transport request when the program was generated?
I checked these structures if they're a part of the BAPI_PO_CHANGE interface, but they're not.
They were present in the main program for the original business object BUS2012.
Could somebody throw some light on this?
Regards
Deepthi.

These are internally related to BUS2012. When ever U copy to a Z object and generate the object, some of the objects which runs the object gets generated automatically in the transport list. These are as such needed for the program to work fine.

Any business object for Organisation Unit Create

is there any business object for Organisation Unit Creation. BUS0018 is available but there it is not defined. basically on saving the Organisation Unit in PP01 Transaction, a workflow should be triggered to send a mail to the Requestor intimating him that the org unit has been created.
points will be awarded even to the slightest cues.

Hi,
Did you check SWEHR2 to see if there are any clues there? I found object PDOTYPE_O there. But it triggers an event for BOR BUS1221. So depending on your needs you could use one of these maybe. The problem is PDOTYPE_O doesn't have any events, so you would need to create a subtype and delegate it. In the subtype you could create your own events which you could call using SWEHR3.
Regards,
Martin

Business object for FB50 or Fv50 transcation

Hello All,
When a transaction is processed in T-code FB50 or FV50
a. It can be directly posted if the transaction amount is less than 10000
b. The document has to be parked, and a workflow has to be created if the amount exceeds 10000, a workflow has to be created and a mail should be sent to higher level (Manager) for approval . Manager should have the facility to edit the document and post it.
please let me know the business object for FB50 transcation and any standard workflow template for my scenario.
Thanks,
ram

Hi JMB,
i went to FB50 and i have given all necessary detail and when i click the park button or post (save)button workflow not trigering, i have tested in swel and swels transcation.
please let me know for my scenario when workflow will start i mean when the park the document or when post the dcoument.
you have given 5 template but in my scenario one approver is there ,please let me know which template i can use...
please guide me..
Thanks,
ram

Business object for MIGO

Hi,
Can any one tell me What is the Busines Object for MIGO
and How to find the Business object for a transaction ?
answers will be rewarded.
Thanks,

Hi Rambabu,
Check the below thread:
How to find a Business Object
This will explain how to search business objects for any transaction.
Regards,
Nitin.

Business object for workflow

Hi Experts,
I am facing a proble to create a workflow for service connection .
The business process is that is a business partner want a electricity connection then if it is a reconnection then agent shud take the previous dues to the business partner for this i want to open the cash payment screen .
So, can any body tell me what is the business object to open the cash payment screen .
Regards,
Khurram Siddique

Hi, I don't think you have a business object for the cash desk, you'll have maybe to create you own BOR method to call transaction FPB0.
Cheers,

How to find business object for particular tcode at particular event

Hi,
I want to know how i can find particular business object for particular tcode for certain event?
For example suppose for tcode PA40, if i create infotype for employee and when i save it after creating it then it must be stored in certain object. How i can find business object where all data realted to emp. get saved?
Thanks & Regards,
Parag

Hi Parag,
To get the business object for given transaction,
1) Go to transaction SWELS
2) Switch on the event trace.
3) Go to the given transaction (For which you want to know the business object)
4) Execute the transaction
5) Go back to SWELS and Switch off the event trace
6) Go to transaction SWEL.. Here you will get the Business Object name (one which starts with BUS)
Hope this will help you.
Best Regards,
Deepa Kulkarni

Business Objects for OM in HR

Hi Experts,
I have a small doubt about ABAP-hr OM module. How to find out the business objects for Organization Management (OM) in swo1 T.code.
and please let me know any procedure and any Objects you have.
Please help me in this regard...............
thanks in advance..........
ravindra....

Hi,
Check
Business Objects :
ORGASSIGNM: Employee organizational assignment
ORGMASTER: Control object for org. master data replication
ORGCHEARM: Designation for organizational reassignment
ORGUNITEXT: Enhanced Organizational Unit
PDOTYPE_SH:HR Position
HRMASTER:Control object for HR master data replication,
EMPLOYEET:Time specification of employee,
EMPLOYEEI:Employee Information
Goto SWO1, in object type, type EMP* and press F4, you will get a list of objects.
Edited by: Neenu Jose on Nov 5, 2008 7:48 AM
Edited by: Neenu Jose on Nov 5, 2008 7:49 AM
Edited by: Neenu Jose on Nov 5, 2008 7:51 AM
Edited by: Neenu Jose on Nov 5, 2008 7:53 AM
Edited by: Neenu Jose on Nov 5, 2008 7:55 AM
Edited by: Neenu Jose on Nov 5, 2008 8:01 AM

Business Objects for FP09 and EC85

Hi Everyone,
Could you please guide me about: "what are business objects which are being used in the following transactions: FP09 and EC85".
Actually we need this for our Document Management System. Please guide.
Thanks and Regards

MP:
You need to be more precise here - the business object for the transaction is commonly known as the object upon which the transaction is based. SO EC85 is disconnection and the business object for disconnection is DISCONNECT. What you are seeing is the reference object. that is entirely different and refers to the object upon which the individual disconnection is operating.
regards,
bill.

Business Object for asset accounting/capitalization

Similar Messages

Maybe you are looking for