Business Object for Event trigering

Hi All:
I want to use Business Object for Event trigering so just wondering if anybody has detail steps required for it.I already looked at transaction SWO1 but I don't know all the required steps.
I need to call a program/function to send data to external system when user changes following objects.
1) Customer master
2) Quote
3) Contact
Thanks in advance.
Nilesh

Hi nilesh
you need to find the appropriate standard business object first . this can be don eby using event trace . switch on the trace by swe4 perform the required transaction and then display the trace in swel. if a standard object is there you will get it listed there with the event that got triggered when u performed the transaction.then u can eventually make a zcopy of it and use
do let me kno if anything else is required
regards
ravish
reward points is the best way of saying thanks in sdn
Message was edited by:
        Ravish Garg

Similar Messages

  • How to find business object for particular tcode at particular event

    Hi,
    I want to know how i can find particular business object for particular tcode for certain event?
    For example suppose for tcode PA40, if i create infotype for employee and when i save it after creating it then it must be stored in certain object. How i can find business object where all data realted to emp. get saved?
    Thanks & Regards,
    Parag

    Hi Parag,
    To get the business object for given transaction,
    1) Go to transaction SWELS
    2) Switch on the event trace.
    3) Go to the given transaction (For which you want to know the business object)
    4) Execute the transaction
    5) Go back to SWELS and Switch off the event trace
    6) Go to transaction SWEL.. Here you will get the Business Object name (one which starts with BUS)
    Hope this will help you.
    Best Regards,
    Deepa Kulkarni

  • Any business Object and Events for CJ01?

    hello friends,
    can any one of u tell me the Business Object and Event for the transaction CJ01?
    Could you please let me know is it  business object (BUS2054) is right one. If it is right one please let me know the Event for CJ01?
    Thanks,
    Sridhar

    Hi Sridhar.
    You want to know if there is triggered an event when you create a project.
    Try the following:
    Activate event trace with SWELS.
    Create a project with CJ01.
    Check transaction SWEL to display trace event.
    Regards
    JCD

  • Business objects for parking of vendor invoices (Both FV60 and MIR7) ?

    Workflow guus,
    I have a situtation where I have to send certain email when a vendor invoice document is parked using
    1) FI vendor invoices using transaction FV60. Can someone tell which business object has event for parking of FI vendor invoice ?
    2) Logistics vendor invoices using transaction MIR7. Can someone tell which business object has event for parking of logistics vendor invoice ?
    Please help.
    Regards,
    Rajesh.

    HI Experts,
    I have to do LSMW for Transaction FV60 . For that i am going to use BAPI .
    Please let me know the Business Object and Method for Parking Document
    Thanks in advance

  • Any business object for Organisation Unit Create

    is there any business object for Organisation Unit Creation. BUS0018 is available but there it is not defined. basically on saving the Organisation Unit in PP01 Transaction, a workflow should be triggered to send a mail to the Requestor intimating him that the org unit has been created.
    points will be awarded even to the slightest cues.

    Hi,
    Did you check SWEHR2 to see if there are any clues there? I found object PDOTYPE_O there. But it triggers an event for BOR BUS1221. So depending on your needs you could use one of these maybe. The problem is PDOTYPE_O doesn't have any events, so you would need to create a subtype and delegate it. In the subtype you could create your own events which you could call using SWEHR3.
    Regards,
    Martin

  • Business object for FB50 or Fv50  transcation

    Hello All,
    When a transaction is processed in T-code FB50 or FV50
    a.     It can be directly posted if the transaction amount is less than 10000
    b.     The document has to be parked, and a workflow has to be created if  the amount exceeds 10000, a workflow has to be created and a mail should be sent to higher level (Manager) for approval . Manager should have the facility to edit the document and post it.
    please let me know the business object for FB50 transcation and any standard workflow template  for my scenario.
    Thanks,
    ram

    Hi JMB,
    i went to FB50 and i have given all necessary detail and when i click the park button or post (save)button workflow  not trigering, i have tested in swel and swels transcation.
    please let me know for my scenario when workflow will start i mean when the park the document or when post the dcoument.
    you have given  5 template but in  my scenario one approver is there ,please let me know which template i can use...
    please guide me..
    Thanks,
    ram

  • Business objects and event type linkages...

    Hi Experts,
    Im a bit confused with business objects (swo1) and event type linkages(swetypv). Ive learned that business objects are used to trigger events and so how does event type linkages related to business object? Do I need to create business object or should I just search/look for the appropriate object needed?Please kindly explain to me the process or steps in using business object and event type linkages in related with idocs.

    Hi,
    Business objects neednot have to be created if your are fine with the standard method they have used in or the events yre available for you. If you need to cusomize it then you have to copy it to a subtype. Then do your modifications in it. Event type linkages are used to say which event is active for a Workflow. And if you want to trigger a Workflow based on certain conditions then you have to use either this or Start of Condition. The Error handling of workflow is also handled by Event Type Linkage. So whenvever you create a event linkage for a workflow you get an entry in Event Type Linkage.
    Hope this would have thrown some light on you.
    Thanks,
    Prashanth

  • Business Object for spot/forward transaction - TX01

    Hi All,
      My requriement is to implement workflow for the transaction TX01. I can't able to findout Business Object for this transaction. Has anyone had experiences about  this transaction. Can any one help me on this.
    Thanks - Krish

    Hi,
    Then in T.code SWEC, you can configure for the Event.
    For this you need the BO to configure, Search the BO first in Forum & SAP Help.
    Once BO found, you can trigger the event via CDHDR config.
    Refer this [Link|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/80ddeba4-e780-2b10-7bb2-fc7a33efabbd] for CDHDR config.
    Regards,
    Surjith

  • Any business Object for CJ02?

    hello friends,
    can any one of u tell me the Business Object for the transaction CJ02?
    I want to trigger my workflow when Status of WBS element changes to released.
    Thanks,
    Romanch

    Hi,
    You can use BUS2054. If you want to trigger when status changes, then u need to create new event and make entries in BSVW tcode.

  • Business object for FB60

    Hi,
    please let me know the business object for the transaction "FB60"
    i can use "FIPP" but when i check "  workfow is not triggering"
    my requirement is after clicking "park" button workflow should trigger..
    i have checked in SWELS and swel transaction i can't abe to get the event trace... i mean no event trace is there...
    please let me know what steps i can do to get buisness object for "FB60" transcation.
    urgent please!!!!!
    thanks
    ram

    Hi JMB!
    i have used FV60 and FB60 for parking  now, i have parked two document succesfully using those transcations, i went to SWELS i have switched on the event then after parking i have switched off the event and i went to swel but no event trigeered there !
    i have checked in event type linkage without knowing the business object how can i activated it...
    my scenario whenever user parking the document, worklfow should trigger.. so i want to find out the business object first...
    please give me the steps to find out..
    thanks,
    ram

  • Business object for Automatic Run in FICO

    Hi experts,
       In Automatic run the work flow has to trigger when the status as ' Proposal is ready to be started / created ' in Transaction F110 and then post the payment in workflow. Please let me know if any business object is avalable for that. If we can trigger the workflow through the Business Transaction Event means, let me know the procedure and the parameters for the Business Transaction events.
    I ll reward the points if it is helpful.......
    Thanks and Regards,
    Velu.....

    Try BTE, process 00001860. Sample FM SAMPLE_PROCESS_00001860. There is no specific business object for this as far I know, therefore you can build your own or start a WF directly.
    Regards, IA

  • How to Find Business Objects for any Tranaction .

    Hi Abapers,
                        How to find Business objects for any transcation.....  and how to connect the Work flow to  any  Trancation  so that for example any body changes the date of Birth ...... so that the work flow should trigger .
    Thanks & Regards
    Bhaskar Rao.M

    Hi Bhaskar,
    For finding business object,you can try transaction SWO4 and by checking the documentation in it you can find your required business object.
    Another method is:
    1) Go to Trx SWE4 and switch on the event trace.
    2) Run your transaction which you want to use for triggering your workflow.
    3) Run transaction SWEL and find your Business Object and related event in it.
    For connnecting your WF to your transaction you have to create a start event in your WF in SWDD,where in you specify the Business Object and start event which you find using above method.
    Eg.You want your WF to be triggered whenever you have an error in your idoc.For this your BO will be IDOCAPPL and your event will be (inputErrorOccurred).This you will give in header data in SWDD.
    Neerja

  • Business object for biliing

    hi , gurus
    i treid to find the business object for billing document but could not can any one please suggest me what is the business object triggered when a billing document is created using transaction VF01 or changed using VF02
    regards
    m.a

    Hi,
    Check BUS2037 which may be the Business Object. As no events Create a Custome Change Document Object using SCDO.
    check VFM Package for other BO if any.
    Firstly debug the exits and check which BO is used so that you can create a subtype.
    For refrence check this article for [Triggering WF through Custom Change Document Object|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/80ddeba4-e780-2b10-7bb2-fc7a33efabbd].
    Hope this process would solve your issue.
    Regards
    Narin

  • Create a business object for a Maintenance object

    Hello,
    I want to create a business object for a maintenance object to change all XML attributes to XML elements.
    Should I have to change the whole XML Schema from attributes to elements one by one?
    For example, I create the business object CM_Person_BO for the maintenance object Person, and use the business object to add user in a more standard way.
    But it is a quite large job to rewrite the whole schema for the maintenance object Person, which has following elements, which are PersonIdentifiers, PersonNames, PersonPhones, PersonCharacteristics, Person and SeasAddress.
    Is there any easy way to do it?
    Thanks,
    Kerr

    Should I have to change the whole XML Schema from attributes to elements one by one?
    Is there any easy way to do it?Unfortunately not, you will have to define the schema containing each field/element, once. The primary objective is that you should create a scaled down version of the BO having only the required fields or subset of available fields, you may not need all the fields of a MO. This increases performance as the IO is performed only for specified fields in the BO.
    You can define separate Data Areas for each Person object's context, i.e. Identifiers, Names, Phones, etc. and include them (includeDA) within the Person BO (CM_Person_BO) for clarity.

  • Creation of Generic business Object for a standard transaction

    Hi,
    We have a requirement where we are depreciating the assets (standard transaction ABAA) using a custom BDC program. We need to maintain a history (called audit trail) for the particular asset that has been depreciated using this program. For this audit train we have been asked to use "Generic Business Object" in transaction code ABAA.
    Unfortunately, Generic object services are not available in this transaction code. Can you please suggest me how to create "Generic Business Object" for a particular standard transaction code. Also, we have show the details of custom workflow that follows the approval process in order to depreciate the asset. how to show this workflow details using Generic Business Object. This is a very critical issue, any help will be very help ful.
    Please let me know should you require more information on this topic.
    Thanks,
    Ashish

    this is already answered in the forum, and also explained in the sap library

Maybe you are looking for

  • How to reinstall Acrobat X Pro? I purchased Acrobat X at a retail staore and Acrobat X Pro from the Adobe Website.

    I just installed a Solid State Hard-drive on my computer and am now looking for a way to reinstall Acrobat X Pro that I purchased from the Adobe Website. I purchased Acrobat X from a retail store. I dont need to install Acrobat X from the Disc before

  • How to read  xml with deep  structure into intarnal table.

    Hi, Could you pls any body provide xslt code for deep structure  convert into internal table. sample xml file: - <ns0:CREATIONOFCONTRACT xmlns:ns0="http://BPCreationXSD.CreationOfContract"> - <CREATIONOFCONTRACTDATA>   <RequestType>L0011</RequestType

  • Where is the password for user SDM stored in sap system?

    Hi SAP Gurus, We recently changed the password of the user j2ee_admin in our dual stack system where our UME is ABAP. Now, we have made changes in the su01 and configtool but after the system restart, the user id j2ee_admin is getting intermittently

  • User can't login in EBS 12.0.6.

    Hi, When user gives user name and pass the following error received. this is only with specific user(only one user). we are using 12.0.6 EBS with database 10.2.0.3, OS linux AS 4. Exception Details. oracle.apps.fnd.framework.OAException: java.lang.Nu

  • Yet another victim of the software upgrade

    My shuffle was working perfectly until I upgraded the software. Now, my computer doesn't recognize the shuffle and obviously, neither does iTunes. Have tried the Apple suggestions and found them to be quite useless. Has anyone figured out how to make