Business object for PO and SWOTICE entries
Hi all,
We've copied the standard business object for a PO - BUS2012 to a Z object to be used in a workflow. In one of the methods for this Z object, we've used BAPI_PO_CHANGE to block an item of the PO. As soon as the program was generated, under the object list of the transport request for these changes, some entries got created for table SWOTICE -
BAPIADDRESS
BAPIEKET
BAPIEKKN
BAPIEKKOA
BAPIEKKOC
BAPIEKKOP
BAPIEKPOA
BAPIEKPOC
BAPIEKPOTX
BAPIESKLC
BAPIESLLC
BAPIESLLTX
BAPIESUCC
BAPIESUHC
BAPIMMPARA
BAPIRETURN
BAPIEKKO
BAPIEKKOL
BAPIEKPO
BAPIEKAN
BAPIEKBE
BAPIEKBES
BAPIEKES
BAPIEKKOTX
BAPIESKL
BAPIESLL
BAPIESUC
BAPIESUH
BAPIRLCOPO
BAPIRLGNPO
SWOTICE - index of frozen DDIC structures.
What is the significance of this table and items? Why did they appear in the object list of the transport request when the program was generated?
I checked these structures if they're a part of the BAPI_PO_CHANGE interface, but they're not.
They were present in the main program for the original business object BUS2012.
Could somebody throw some light on this?
Regards
Deepthi.
These are internally related to BUS2012. When ever U copy to a Z object and generate the object, some of the objects which runs the object gets generated automatically in the transport list. These are as such needed for the program to work fine.
Similar Messages
-
Business Objects for FP09 and EC85
Hi Everyone,
Could you please guide me about: "what are business objects which are being used in the following transactions: FP09 and EC85".
Actually we need this for our Document Management System. Please guide.
Thanks and RegardsMP:
You need to be more precise here - the business object for the transaction is commonly known as the object upon which the transaction is based. SO EC85 is disconnection and the business object for disconnection is DISCONNECT. What you are seeing is the reference object. that is entirely different and refers to the object upon which the individual disconnection is operating.
regards,
bill. -
Is there a Business Object for Sales Order Create and Change VA01 and VA02
Hi experts -
I am looking for a business object for Sales order create and change VA01 and VA02 respectively?
Thanks,
MarkHi Mark,
I think this question is best answered in [SAP Solutions|/community [original link is broken]; Forums.
- Subhodeep
Edited by: Subhodeep on Aug 29, 2009 11:14 AM -
Any business Object for CJ02?
hello friends,
can any one of u tell me the Business Object for the transaction CJ02?
I want to trigger my workflow when Status of WBS element changes to released.
Thanks,
RomanchHi,
You can use BUS2054. If you want to trigger when status changes, then u need to create new event and make entries in BSVW tcode. -
Business object for FB08
Hi Naval,
To find out a BTE for a given tcode you can try this. In a session open SE37 tcode and open the function module BF_FUNCTIONS_FIND. Set a break point at CALL FUNCTION. Then in another session open FB08 tcode. Try creating a entry and save. When you press it will call this function module. Now check for the values in the container I_EVENT. It contains the BTE that can be used for the given tcode.
Regards,
Raj -
Create a business object for a Maintenance object
Hello,
I want to create a business object for a maintenance object to change all XML attributes to XML elements.
Should I have to change the whole XML Schema from attributes to elements one by one?
For example, I create the business object CM_Person_BO for the maintenance object Person, and use the business object to add user in a more standard way.
But it is a quite large job to rewrite the whole schema for the maintenance object Person, which has following elements, which are PersonIdentifiers, PersonNames, PersonPhones, PersonCharacteristics, Person and SeasAddress.
Is there any easy way to do it?
Thanks,
KerrShould I have to change the whole XML Schema from attributes to elements one by one?
Is there any easy way to do it?Unfortunately not, you will have to define the schema containing each field/element, once. The primary objective is that you should create a scaled down version of the BO having only the required fields or subset of available fields, you may not need all the fields of a MO. This increases performance as the IO is performed only for specified fields in the BO.
You can define separate Data Areas for each Person object's context, i.e. Identifiers, Names, Phones, etc. and include them (includeDA) within the Person BO (CM_Person_BO) for clarity. -
Creation of Generic business Object for a standard transaction
Hi,
We have a requirement where we are depreciating the assets (standard transaction ABAA) using a custom BDC program. We need to maintain a history (called audit trail) for the particular asset that has been depreciated using this program. For this audit train we have been asked to use "Generic Business Object" in transaction code ABAA.
Unfortunately, Generic object services are not available in this transaction code. Can you please suggest me how to create "Generic Business Object" for a particular standard transaction code. Also, we have show the details of custom workflow that follows the approval process in order to depreciate the asset. how to show this workflow details using Generic Business Object. This is a very critical issue, any help will be very help ful.
Please let me know should you require more information on this topic.
Thanks,
Ashishthis is already answered in the forum, and also explained in the sap library
-
Implementation Business Objects in CAF and developing WDJ application
Hi Experts,
I've read some articles about SAP CE CAF from SDN and I'm making some exercises according those guidence. Right now I have a problem and want to get suggestion from you.
As you know, from CE 7.1.1, the CAF support importing the Business Object through EJB model. So when develop a WDJ application using caf, we can using these procedures:
(Implementing business objects in CAF and developing WebDynpro application)
1) Create business objects or application service.
2) Generate EJB Implementation class for business objects or app service.
3) Create a WebDynpro application
4) Importing the EJB model using the template.
5) Create the UI for the app.
My problem is: In the business object or application serivice, if the operation parameter type is integer, after we generate the EJB class, the type will changed to String. After the WDJ UI is created, the application test failed. The integer field could not passed to the BO successfully.
If all the parameters type are string in the operation, there's no problem. But when I use Integer or Date, the EJB class will change the type and the WDJ app will failed.
I've also test the scenario in CE enviroment including 7.3 also failed. So I'm a little confused which step was wrong. I don't know whether you've seen such problem before, if you could give any suggestion, it'll be very appreciated!Hi, Winters.
I got the same program, try to parse into the type which you want in AS operation.
BR.
Louis Huang. -
Any business object for Organisation Unit Create
is there any business object for Organisation Unit Creation. BUS0018 is available but there it is not defined. basically on saving the Organisation Unit in PP01 Transaction, a workflow should be triggered to send a mail to the Requestor intimating him that the org unit has been created.
points will be awarded even to the slightest cues.Hi,
Did you check SWEHR2 to see if there are any clues there? I found object PDOTYPE_O there. But it triggers an event for BOR BUS1221. So depending on your needs you could use one of these maybe. The problem is PDOTYPE_O doesn't have any events, so you would need to create a subtype and delegate it. In the subtype you could create your own events which you could call using SWEHR3.
Regards,
Martin -
Business object for FB50 or Fv50 transcation
Hello All,
When a transaction is processed in T-code FB50 or FV50
a. It can be directly posted if the transaction amount is less than 10000
b. The document has to be parked, and a workflow has to be created if the amount exceeds 10000, a workflow has to be created and a mail should be sent to higher level (Manager) for approval . Manager should have the facility to edit the document and post it.
please let me know the business object for FB50 transcation and any standard workflow template for my scenario.
Thanks,
ramHi JMB,
i went to FB50 and i have given all necessary detail and when i click the park button or post (save)button workflow not trigering, i have tested in swel and swels transcation.
please let me know for my scenario when workflow will start i mean when the park the document or when post the dcoument.
you have given 5 template but in my scenario one approver is there ,please let me know which template i can use...
please guide me..
Thanks,
ram -
Hi,
Can any one tell me What is the Busines Object for MIGO
and How to find the Business object for a transaction ?
answers will be rewarded.
Thanks,Hi Rambabu,
Check the below thread:
How to find a Business Object
This will explain how to search business objects for any transaction.
Regards,
Nitin. -
How to find business object for particular tcode at particular event
Hi,
I want to know how i can find particular business object for particular tcode for certain event?
For example suppose for tcode PA40, if i create infotype for employee and when i save it after creating it then it must be stored in certain object. How i can find business object where all data realted to emp. get saved?
Thanks & Regards,
ParagHi Parag,
To get the business object for given transaction,
1) Go to transaction SWELS
2) Switch on the event trace.
3) Go to the given transaction (For which you want to know the business object)
4) Execute the transaction
5) Go back to SWELS and Switch off the event trace
6) Go to transaction SWEL.. Here you will get the Business Object name (one which starts with BUS)
Hope this will help you.
Best Regards,
Deepa Kulkarni -
Hi Experts,
I have a small doubt about ABAP-hr OM module. How to find out the business objects for Organization Management (OM) in swo1 T.code.
and please let me know any procedure and any Objects you have.
Please help me in this regard...............
thanks in advance..........
ravindra....Hi,
Check
Business Objects :
ORGASSIGNM: Employee organizational assignment
ORGMASTER: Control object for org. master data replication
ORGCHEARM: Designation for organizational reassignment
ORGUNITEXT: Enhanced Organizational Unit
PDOTYPE_SH:HR Position
HRMASTER:Control object for HR master data replication,
EMPLOYEET:Time specification of employee,
EMPLOYEEI:Employee Information
Goto SWO1, in object type, type EMP* and press F4, you will get a list of objects.
Edited by: Neenu Jose on Nov 5, 2008 7:48 AM
Edited by: Neenu Jose on Nov 5, 2008 7:49 AM
Edited by: Neenu Jose on Nov 5, 2008 7:51 AM
Edited by: Neenu Jose on Nov 5, 2008 7:53 AM
Edited by: Neenu Jose on Nov 5, 2008 7:55 AM
Edited by: Neenu Jose on Nov 5, 2008 8:01 AM -
Business Object, SAP BW and SAP Enterprise Portal
Hello all,
I've a few questions about the possibility for linking Business Object, SAP BW and the SAP Enterprise Portal.
The Business Package MSS 1.41 give us a functionality to display (in a federated portal) personalized Budget and costs in an Overview Iview (kind of Welcome page).
Those information are retrieved from SAP BW and I'd like to know if it's possible to retrieve those data (with the same functionality) from Business Object tool.
Is it possible to have those personalized reports without having a direct link (standard architecture) between SAP BW and the federated portal?
Thank you in advance fro your answers.
MatthieuHi,
The procedure to replicate BW users in BO is explained in detail on the blog of Ingo Hilgefort:
/people/ingo.hilgefort/blog/2008/09/19/businessobjects-and-sap--configure-sap-authentication
Regards,
Dave -
Differences between business objects 4.0 and 4.1
Hi,
Can any one please provide the some blogs regarding the differences between the business objects 4.0 and 4.1.
Thanks & Regards,
Kavya.CH.Hi Kavya,
Please refer following PDF for BI 4.1 new features added in each service pack.
http://help.sap.com/businessobject/product_guides/sbo41/en/sbo41_whats_new_en.pdf
You can have a look at the L1 and L2 presentations here:
https://scn.sap.com/docs/DOC-40282
http://scn.sap.com/docs/DOC-40283
You can refer to the following doc to get more information on the new features and changes introduced in Web Intelligence 4.1.
http://scn.sap.com/docs/DOC-43488
Regards,
Hrishikesh
Maybe you are looking for
-
Installing windows 8.1 on X60...is it ok ?
Hi... My laptop is an old lenovo thinkpad X60 I want to upgrade XP to windows 8.1 ( if it is not possible...then maybe windows 7 ) I already got an official answer from lenovo service center that it is ok with 7 but not ok with 8.1 but... I found som
-
i cat use my itunes because it keeps coming up saying that it cant connect due to network connection error check network connection but my internet connection is fune
-
I have data dynamically loading into a datagrid. I also have a MediaPlayer component on the screen. What I want is when the person clicks on one of the title's in the datagrid, for the movie associated to pre-load, then load into the movieClip. (The
-
HI Guys, I wanna work on PI 7.1 from now .Please let me know what are pre-req,TCODES required and process to complete WS-Sender as well as receiver. Thanks Prabhakar
-
Can't set up my bigpond email account on my iPad, what are the tricks?
Attempting to set up my new iPad with a Microsoft exchange account linked to my big pond email account. I obtain a message unable to verify account information. What do I need to enter in each field to ensure successful registration. Thanks