Business Object system monitoring from SOLMAN

Hi,
We have recently installed SAP Business Objcts in a seprate system and now we want to include this system in SOLMAN for early watch alerts.
can any one provide the document/setps on how to include our Business Object system in SOLMAN.
Thanks * Regards,
KVR.

Kasi
I could not find any BO specific talks about SolMan and EWA in particular
Did you already tried to add the system like a regular NW based system via SMSY? I guess you can use the regular procedure here
Nesimi

Similar Messages

Changes in SAPBW system to connect Business object system

hi,
Do we need change any settings in SAPBW System in order to connect Business Objects system
for example: do we add any transports...
Thanks

Hi Hari,
please also try this post in the dedicated [SAP connection |BusinessObjects Integration Kits;forum.
Falk

Configure System monitoring in SOLMAN

Hi
I need some help on this. For now I have installed solman / windows 2008 / oracle 10g on VM. A test system has been added as a satellite system in solman. CCMS Agent and CCMS PING has been installed in the satellite system. I am able to use my Alert monitor in solman to check out alerts from the satellite system. what do I need to do next to integrate this with solution manager?
I have reads the document http://help.sap.com/saphelp_sm40/helpdata/EN/0b/160419162a476380b5608e7f27a742/content.htm
This talks about "Setup system monitoring" and going into change mode. I dont see the change mode or the option to setup system monitoring.
PS: SMSY is setup correctly, I can see my satellite system from there.
any ideas on how to proceed will be appreciated.
thanks
ravi

The "Setup system monitoring" option showed up after in went into solutions overview in solution_manager Tcode and clicked on a number (hyperlink) under System monitoring for SAP Solution Manager Reference

How to access Business object type attribute from a method/function modul ?

Hello,
i have created a business object type object along with attributes and methods. Now inside the method i want to access the attributes. inside the method i am writing:
data a type XXX.
a = me->attribute
this is creating a compilation error.
Now the method is defined as a function module in some package, so can anyone inform me how to access object attributes from the function module ?
pointes are awarded
Regards

Hello,
thanks for your answer, but this too did not work, "=>" is for static attributes and the attributes i have are not static. Moreover, i tried it but it gave the same error :
the abap error was when i was checking the code is :
the type me=>documenttype is unknown
as you know in SWO1 i created an object and when i create a method you link it to a function module and this is where you have the implementation of the method, so from this method how can i access the attributes on the main object that i created in SWO1
regards

Want to know how to debug the Business Object Method called from CRM

Hi all,
I have to debug a Method of a custom Business Object. This is being called when a certain action is performed
on the CRM ( CIC0 screen). I can not see an option to set an external break point in the Program of the Business Object
Method.
This Business Object calls a standard SAP FM. I tried setting an external break point in that FM and tried executing that.
But it is not stopping there.
Can any one please let me know how I can debug this when triggered from CRM?
Thanks in advance.
Thanks & regards,
Y Gautham

Hi,
I have tried checking the option 'IP MATCHING' option. I have given my user id and also the 'WEBUSER' as well.
But still I am unable to debug the application.
Can you please let me know if I am missing anything further.
Thanks & regards,
Y Gautham

Can Business Object Access Queries from the BI query designer?

Hi Gurus,
I've started working with BOBJ and honestly I'm not impressed with it's functionalities, specially with the report layouts (SO many limitations!!). Anyway I was wondering if Business Objects can access BI Queries in the Query Designer since I can do most of the manupilation in Query Designer that I need. Thank You in advance and any help will be most certainly appreciated.
- Kit

Hello KIT,
Also, look at the below Blog for xcelsius where he directly consumes the BEx query the QUERY_VIEW_DATA Web service out of the BW system. This is one way to approach the BEx query:
/people/arvind.bhaskar/blog/2009/04/17/consuming-bi-queries-in-an-xcelcius-dashboard
Thanks
Arun

System monitoring in solman 3.2

Hi,
We are having solution manager 3.2. We need to monitor R/3 server from solution manager system. Completed setting up of SMSY for R/3 server, tested RFC. Getting some issues on solution_manager transaction. Can anyone explain the steps of doing solution_manager(DSWP) transaction to enable the monitoring of CPU,memory etc.
Thanks,

It's hard to describe but I am trying do my best here.
In DSWP transaction, click your solution, then Solution Monitoring and click Setup System Monitoring, it will bring you a screen so you can activate monitoring and define what you want to monitor and its criterias.
CPU monitoring is defined under your server name
Memnory Mngt is under your instance name.
Thanks,
Yujun Ran

Availability Monitoring from Solman

Dear community,
we are using availability monitoring with CCMSPing from our Solution Manager as central monitoring system. We tried to configure a central autoreaction method that send automatically emails if a syste is down. That works for all other configured MTE-classes but not for the availability classes.
What could be the issue with that?

Hello Christoph,
> availability monitoring with CCMSPing from our Solution Manager as central monitoring system.
> We tried to configure a central autoreaction method
the information regarding the availability is stored locally in your central monitoring system therefore a central autoreaction will not work here (because there is no agent that will trigger this).
As a consequence you have to configure an additional autoreaction that is started in dialog. Please note that the local autoreaction will be started in client 000 so you need also to configure SAPconnect in this client.
Regards, Michael

BI Process chain monitoring from SOLMAN

Hi,
We have configured CEN in our landscape and successfuly managed to get data from satellite systems and getting alerts according to our requirement.
But for BI Process chain Monitor we are getting alerts of yellow MTE with text "Entire chain now has status 'A'", which is flooding our mailbox. We cant find any way to stop this and to receive mails only for failed process chains i.e. for red MTE.
Can you please help us in this?
Thank you,
Lena

Hello Marco,
the problem is that the Process Chain monitor is not yet available with ST-A/PI 01L*. Unfortunately the empty hull that you see during the setup was shipped without the proper content. The Process Chain monitor will be properly shipped with the next ST-PI and ST-A/PI combination in Q2/2010.
Sorry for any inconvenience caused.
If you want to have this monitor earlier on it could be implemented via Customer Exit in case that you have some MaxAttention or Safeguarding engagement.
Best Regards
Volker

Extract Satellite System Details from SOLMAN

Hi
We are using SOLMAN EHP 1. There are n no. of systems connected to our SOLMAN. We want to create inventory sheet of all satellite system. Requirement is we want to export System Details (Hostname,IP Address, System No) of all satellite systems to excel. We have checked in SMSY , but there is no download option. Is there any table or any other way to download such details.
Regards
Kapur

Hello Paul
Thanks for your prompt reply. I had seen this earlier, system no. , system id are coming there but message server column is missing when i view table SMSY_SYSTEM_SAP. i had seen checked Settings>format list>Choose Fields and found that message server is already selected but it is not coming when view table SMSY_SYSTEM_SAP.
Can you tell me how to correct it or any other way to collect this information.
Regards
Kapur

Business Objects Scheduler Jobs Monitoring

Hi,
Is there a management pack available for integration with System Centre (SCOM) such that we can monitor failed scheduled jobs in Business Objects via SCOM?
Is there any other way to monitor failed scheduled Business Objects jobs straight from the database or via any other method?
Thanks,
Chandan

Hi Chandran,
I'm not a SCOM expert but I understand it is basically a monitoring tool.
Normally you would check for failed schedules in Business Objects using the Instance Manager, to filter for failed scheduled reports. Alternatively you could use the Query Builder to report directly against the XI3.1 Repository and return a list of failed instances.
Above workflows can also be coded into the SDK to provide customised feedback on schedule failures
The final option would be to simply set up email Notifications on the schedules to simply email the Administrator in the event of a schedule failure.
With any of the above options it should be possible to link in your SCOM system to read\monitor from this output.
I hope this helps.
Kind regards,
John

Scheduling a Business Objects 4.0 Webi from Abap

Is there a way to pass in prompts and schedule a Webi report in Business Objects 4.0 from Abap? We have a situation where we want to email out a webi report to each of our sales reps with their particular sales information based on salesid.
Right now we would have to create and maintain about 250 individual scheduled jobs in Business Objects and that is a maintenance nightmare so I was wondering if we could use our scheduler in our ERP6.0 environment and write an Abap program to pass in the parameters needed to schedule the job in BOBJ.
For example, every Monday the Abap job would run and collect all salesmen info including salesid and email address and would then use that info to send the info to BOBJ to schedule and run the reports one time.
Hopefully what I am wanting is clear.
Thoughts?
Thanks,
Mike

Priyanka,
You need to STOP the Adaptive Job Server, this will STOP all scheduling jobs.
Regards,
Ajay

Business Objects is not returning all rows from Query

We set the rowcount to 1000000 and the business objects query only returns 16,960 rows. We then uncheck the limit for the rowcount and the first run of the query returns 65,535. The subsequent run of the query returns all the rows which is greater than 65,535. We are on release 6.1A of business objects and selecting from Microsoft SQLServer 2005 in 2000 compatablility mode. We noticed that the rowcount being sent to SQLServer is replacing the set number with the 65,535 the first time the query is sent and subsiquent queries have the correct rowcount set. What would be causing the rowcount to be reset and how can it be fixed?

We set the rowcount to 1000000 and the business objects query only returns 16,960 rows. We then uncheck the limit for the rowcount and the first run of the query returns 65,535. The subsequent run of the query returns all the rows which is greater than 65,535. We are on release 6.1A of business objects and selecting from Microsoft SQLServer 2005 in 2000 compatablility mode. We noticed that the rowcount being sent to SQLServer is replacing the set number with the 65,535 the first time the query is sent and subsiquent queries have the correct rowcount set. What would be causing the rowcount to be reset and how can it be fixed?

Solman 7.0 : setup system monitoring

hi
I am taking an error while I want to configure the system monitoring in solman 7.0
solution monitoring-->sys monitoring --> setup sys monitoring
the CCMS Read Destination status is RED.but I have tested the CCMS Read Dest. by double clicking related section .it is ok.(sm59)so connection is ok .
have you got any idea ?
regards

hi
I have checked auth check via sm59 . it is failed.conn test is ok
the error is like this : "user or pass is not true"
what is your suggestions?
thanks in advance

How to directly call business object class from backing bean class

I woul like to call business object class directly from the backing bean class and implement methods in BO. If possible can anyone give an example code.
Thanks in advance

Which problems are you occurring then? I really don't see problems. You're just free to access and invoke them.

Business Object system monitoring from SOLMAN

Similar Messages

Maybe you are looking for