Business Object type and Transactions

Hi, gurus.
Where can i check the matching of Business Object type with transaction type , i.e. CRM Service Process ( BUS2000116 and SLFN)?
Is it possible to change these kind of settings? Where?
Thanks a lot

Hi Michele
The transaction you are looking for should be SWO1
Then put the ex "BUS2000116" into the Object/Interface type and ...
Guess it will help you
Best Regards
Daniel

Similar Messages

Transaction KB16N business-object type and key for GOS

When attachments (notes, PC documents etc) are made to a manual cost allocation in transaction KB16N using GOS (generic object services):
what is the business-object type?
how is the business-object key constructed?
I suspect that the business-object type is BUS6036.
I suspect that the business-object key is the concatenation of the controlling area and the document number (using internal values).
Is that correct?
The reason for my question is that I have a program to display attached notes (and allow drill-down to attached PC documents) that works for various business objects (billing documents, purchasing documents and some FI documents), but I cannot get it to work for manual cost allocations.
John

Hi Michele
The transaction you are looking for should be SWO1
Then put the ex "BUS2000116" into the Object/Interface type and ...
Guess it will help you
Best Regards
Daniel

Cheat Sheet/Listing of Object types and transactions they are available in?

Does anyone know how to obtain a listing of the standard object types and where they would be available?
We have already worked with the Travel Management Trip Docuemnts and I know that object type BUS2089 is available through the Object for Services area of transaction PR05. So we store entries in the TOA01 table for this object and they are available to us in the object services section.
But now we want to leverage the functionality we built and extend it to other areas. But I spent a lot of time today trying to find out what object could be used through transaction IE03 for an equipment record and finally found EQUI. Now I just have to test it out.
I see a lot of standard document types available as well and don't know what they are for - for Plant Maintenance work order notifications object type BUS2038 is there with PMONOTFPAP, PMIDAMAGE and PMIREQUEST already available. I didn't want to create a new one if these are available for work order notification images, etc.
It would be nice if there was a spreadsheet or listing that detailed each object type and where it was used in the system.
(I did try searching but didn't find this question/answer on a broad basis.)

Tarun,
Thanks for replying. I think that we are agreeing on the same details, but it doesn't really answer my question.
I guess what I am looking for is if I asked the following question:
     What object type is used when populating the object services link from within an equipment record via IE03?
How would you obtain the answer to this question - besides just knowing it?
It's the same way that I know the following:
     What object type is used when populating the object services link from within a trip via PR05? --> BUS2089
     What object type is used when populating the object services link from within a work order via IW33? --> BUS2007
     What object type is used when populating the object services link from within a wo notification via IW23? --> BUS2038
The last two were easy because it prompts you when creating an attachment. The first one someone told me the answer to.
We will be doing image links for many different documents (invoices, journal entries, HR employee records, etc) and I'm just trying to figure out how to know which objects to use. Once I know the object I know how to configure the OAC* tables for use.
Any help is much appreciated.
Thanks!

Transaction SMOEAC does not display Object type and Object Name options.

Dear all,
When I go to transaction SMOEAC system does not display fields Object type and Object Name option instead displays an empty frame allowing only to create new objects.
System does not allow and display existing objects to edit.
Most imp with the same ID, I am able to see the existing objects and two fields "Object type" and "Object Name" on different machine. So there is no authorization issue.
My SAP GUI version where these fields are not visible is 640 Final Release with 6405.5.18.1016 version and Patch level 18.
My SAP GUI version here these fields are visible is 640 Final Release with 6404.4.14.1012 version and Patch Level 14.
Any idea what could be the reason?
Regards,
Sandeep Parab

With installation of latest version of SAP GUI 710 final Release resolved my problem.
Regards,
Sandeep

Business object type for parked invoices

Hi,
We are using documentum to store documents that have been attached to business object types in SAP. The business object types are configured in transaction OAC3 to point to a pre-configured content repository.
Having this configuration allows the object type to use the "services for objects" option, enabling it to store attachments.
The business object types for invoices have been configured and we are able to store attachments. However this does not seem to work for "Parked invoices". The configuration in the "services for objects" component is not there and the feature to store the attachment is disabled.
As the configuration needs to be done for all object types that need to be able to store attachments, maybe someone here can indicate what the object type is for parked invoices. Alternatively, maybe there is a way to look up the various business object types.
Any help you can provide is appreciated.
Thanks.
Kind Regards,
Giwan

Hi ,
Thank You for your reply.
I created inquiry . it takes BUS2031.But BUS2031 is used for quotation.But that inquiry is open in VA12(Change Inquiry) Transaction,not open in VA22(Change Quotation).
Is there any setting for BOR object types to Document Types.
Please give me a reply as early as possible.It's very urgent.
Thanks,
Saritha

Business Object Type

I needed to associate a document with a business object type.
The transaction is ME41. I was only able to associate the document
with a business object by bringing up a document, creating a file
attachment, and then looking into table srgbtbrel and seeing that the
business object was BUS2010.
Is there an easier way to do something like this for other document types?

I think this is the best way.

No archive information found for object type and document type

Hi All,
When i try to view the print preview for a perticular doc type, system is giving the error as "No archive information found for object type and document type"
Diagnosis
    No information was found about optical archiving. This may be due to
    either of the following reasons:
    1. No valid archiving parameters were passed
    2. Your system is not configured for optical archiving
System Response
    Processing is cancelled.
Procedure
    Specify valid archiving parameters or check whether your system is configured for optical archiving
Regds,
CB

Hello,
You are trying to Print & also archive by selecting the option Print & Archive.
You have to do archivelink configurations and then create document type and assign to the object type with content repository with archivelink table.
If you want to archive the spool or output then you have to use object type as DRAW. If you are archiving invoice document or letters or so on then you have to know the object type/Business object of the transaction.
Please note that for archivelink configuration, attachment will be either stored in archive server or in SAP database table based on business requirement.
Hope this will give you some understanding on archiving area.
-Thanks,
Ajay

Business Object Types

hi,
Can anyone send me information on how to find out the business Onject types.
I want to find the business object types for Sales Order, Delivery and Billing.
Thank you
Laxman

Hi Laxman,
Go to Transaction SWO1(Business Object Builder).
In the Object/Interface field click on Help request(F4). You will find an object list from which you can find the business object types for Sales, Delivery, Billing.
Hope your problem gets solved.
Thanks
Kumar

Creating Business Object Reports and Dashboards utilizing Informatica

I need to create Business Object Reports and Dashboards utilizing Informatica database. Please let me know what connections I need to create to integrate the data into Web Intelligence, Universe, Xcelsius, and Crystal Reports.
Thank you

I've just done some quick checking and I don't see a native connection type for Infomatica in Designer or Crystal. (Designer is a tool for building universes - WebI and Xcelsius both read data through a universe, Crystal can read data through a direct connection to the database or through a universe.) This means you'll probably have to set up a "generic" ODBC connection in order to connect to it.
-Dell

How to access Business object type attribute from a method/function modul ?

Hello,
i have created a business object type object along with attributes and methods. Now inside the method i want to access the attributes. inside the method i am writing:
data a type XXX.
a = me->attribute
this is creating a compilation error.
Now the method is defined as a function module in some package, so can anyone inform me how to access object attributes from the function module ?
pointes are awarded
Regards

Hello,
thanks for your answer, but this too did not work, "=>" is for static attributes and the attributes i have are not static. Moreover, i tried it but it gave the same error :
the abap error was when i was checking the code is :
the type me=>documenttype is unknown
as you know in SWO1 i created an object and when i create a method you link it to a function module and this is where you have the implementation of the method, so from this method how can i access the attributes on the main object that i created in SWO1
regards

Business Object Types for Z-tables

hi
could anyone please guide me how to create business-object-types for Z-tables?
thanks in advance
regards
pavan

Hi,
Business objects (SWO1) are representations of business entities.
So it is impossible to ask I need to create a business object for a z-table, because that's not business specific.
Normally when you're faced with a BO issue, you first search for useable existing BO's. In there you also search if SAP has already provided the wanted functional requirement. If this is not present, you then search for a BO which is closest to the Functional requirement and then create a subtype of that BO en extend it to suit your needs (attributes, methods, events etc.) via delegation you can then also se it in sap standard.
for more infor check the SAP Business Workflow

Given a business object type, how to find out the underlying table name ?

Hi,
Given a business object type (e.g. BUSxxx), is there any Function Module that can be used to get the table name for that object ?
Have been through the SWO* FM's but did not get anything yet.
Pls let me know how this can be done.
Regards,
-Kev.

>
Kelevenwise wrote:
> Thanks Christine for the response..
> Let me add a few more details to clarify my requirement
>
> I need to read the data of business objects (not a specific one, but the application should be able to read data of any business object). Given a table name, I am able to figure out the column information and read that data. But all I have is the business object type, so would need to figure out all the tables (as you helpfully pointed out, there could be more than 1 for a business object) and then read from those tables.
>
> The reason I feel I cannot use the business objects methods directly is because I would not know which method to call to get me the relevant data - this is an external application, not called from within the system.
>
> Is there another way to achieve this requirement ?
>
> Regards,
> - Kev.
So, assuming for the moment we are just dealing with the PO BUS2012 business object, your external application will be passing you a BO type and also (presumably- otherwise you could be sending back an awful lot of data) a BO key, and you then want to send back all the detail for PO - exactly what the GetDetail method that is present on most objects does - is that right?
Since most BOs have a GetDetail method, can't you just use that?
Though I really can't see why your external application would be interested in all SAP BOs - most applications are a bit more specific than that.

How to trigger a form based on object type and process type

Hi all,
I am new into SRM.. I have been asked to develop a form by cloning an existing standard form..
Using bbp_output_change_sf badi you can trigger the form by passing the object type but the scenario is such that depending on the object type and process type the new form should be triggered.
The parameter iv_object_type passes the object type but how could i pass the process type ?
In the badi I noticed an import parameter is_event that has a field called transction_type that carries the process type but this field never got populated when i checked using debugger.
Please help as to how i can trigger the form based on the object_type and the process_type.
Thanx in advance.

Thanx again Jay Yang.. Well is there any possibility that you could get the items that were confirmed..
Let me eleborate..
Suppose in the PO u order an item for 10 nos and 5 gets confirmed and u return 2..
Well in my case it is that i need to fill up a field Qty returned / Qty confirmed..
I was able to get the number of items from the PO by passing the the passing the parameter to the FM "bbp_pd_conf_getdetaill"
but i dont know how to get the number of items been confirmed..
The quantity field in the line item structure gives me the number of items returned..
Can u tell me how to get the number of items been confirmed....

Object type and object subtipe in configuration of Z component

I created one Z component and I need to have different configuration views. If I create configuration I have only <DEFAULT> value available for object type and subtype. How can I define other available object types for Z component?
Thank you in advance.

Hi Robert,
You can go to CRM->UI Framework->UI Framework Definition->Define UI Object Types.
These are generic Object types and can be used for defining configuration of any component.
Alternatively, you can create your own Object types and Sub Object types (hardcoded) in the method where you want to use them. You can look into method DO_CONFIG_DETERMINATION in class CL_BP_HEAD_ACCOUNTDETAILS_IMPL for reference.
Thanks
Vishal

Delete Business Object Type (SWO1)

Hi gurus,
How can we delete/modify objects in SWO1 that were created in a previous version. Are these actions allowed, is there a workaround if its not allowed?
Thanks for your help!
Jason

Hi Raymond,
Thank you for your help.
I have come accross that thread in SDN while doing some research already. But It does not completely answer my question.
Correct me if I'm wrong, this means there is absolutely no workaround to modify a business object type that has been created in a different version? If thats the case why does SAP enforce this rule?
Thank you

Business Object type and Transactions

Similar Messages

Maybe you are looking for