Business Objects Management Console - Shedule Jobs Problem

Hi,
I am novice in Business Objects technology and i am facing a problem that i describe next:
The Jobs Scheduled are not running but if we execute the Job manually the Job runs normally.
Do you have any idea about what can be wrong? Is there any logs that can be checked?
Thank for your efforts.
            Best Regards
                   João Fernandes

Hi Rim and Sebastian,
Thank you for your interest in my problem.
I am running Data Integrator Management Console and the version is Business Objects Data Integrator 11.7.2.1
I check the starting date and there is none because we want to run the job in a daily basis.
I hope this information could help you to help me.
Best Regards
              João Fernandes

Similar Messages

  • Oracle Management Console 10g - Job Status - Suspended on Agent Unreachable

    Recently we updated our RDMS from 10.2.0.1 to 10.2.0.4.0 PATCH 25.
    Ever since we upgraded, we have had trouble with our RMAN backups. Now when a scheduled backup begins it never ends. Now whenever we schedule a job, from a backup to any simple system command, the status immediately returns "Suspended on Agent Unreachable".
    We can start and stop the dbconsole successfully, and I can use the OEM to monitor the database, and make changes to that. However, I cannot run any scheduled database jobs through the OEM. However, I can run the rman jobs via the command line.
    The database server, and the OEM console is on the save server. I am not running RAC. Everything database related is on this one server.
    Here are the results for emctl status agent:
    E:\oracle\product\10.2.0\db_1\BIN>emctl status agent
    Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
    Copyright (c) 1996, 2007 Oracle Corporation.  All rights reserved.
    Agent Version     : 10.1.0.6.0
    OMS Version       : 10.1.0.6.0
    Protocol Version  : 10.1.0.2.0
    Agent Home        : E:\oracle\product\10.2.0\db_1\content.mydomain.com_ORCL
    Agent binaries    : E:\oracle\product\10.2.0\db_1
    Agent Process ID  : 34372
    Agent URL         : http://content.mydomain.com:3938/emd/main
    Started at        : 2010-01-11 14:58:24
    Started by user   : SYSTEM
    Last Reload       : 2010-01-11 14:58:24
    Last successful upload                       : (none)
    Last attempted upload                        : (none)
    Total Megabytes of XML files uploaded so far :     0.00
    Number of XML files pending upload           :     5016
    Size of XML files pending upload(MB)         :    42.77
    Available disk space on upload filesystem    :    37.94%
    Agent is Running and ReadyHere are the results for emctl status agent:
    E:\oracle\product\10.2.0\db_1\BIN>emctl upload
    Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
    Copyright (c) 1996, 2007 Oracle Corporation.  All rights reserved.
    EMD upload error: uploadXMLFiles skipped :: OMS version not checked yet..I think the EMD upload error may be the problem, but I'm unsure how to resolve this.
    What do I need to do in order to resolve this issue?
    If any more info would be useful, please let me know and I will post it immediately.
    thanks.

    Rondeyli,
    Thanks, that was it. I followed your instructions, and was able to get the system to work. I had to alter the commands a bit to get them to work on my system, so here is what I did.
    I performed the following steps:
    1. Ran the following command:
            emctl stop dbconsole
    2. deleted all files in $AGENT_HOME/sysman/emd/upload and $AGENT_HOME/sysman/emd/state
    3. Ran the following command:
           emctl clearstate dbconsole
    4. Ran the following command:
           emctl secure dbconsole
    5. Ran the following command:
           emctl start dbconsoleThis got everything running for me.
    thanks.

  • Connecting to SLM2048 switch through management console XSLT Processor problem

    When I try to connect to my SLM2048 I receive the following message: "your browser does not seem to support xsltprocessor"
    How can I resolve this ? I'm using IE 11 and Chrome 40.0.2214.93 m

    Hi Rlokar001,
    I am afraid this switch is not compatible with new browsers anymore. If this is not one of SG200 switches the only solution could be old browser and fix. Please take a not of the zip file with fix documents:
    https://supportforums.cisco.com/discussion/10771501/srw248g4-issues#3103511
    Regards,
    Aleksandra

  • Management console problem after installing recommended patch cluster

    Hello everyone.
    I just got a new SUN 440 server, it didn't come with the solaris os installed and so I installed solaris 9 12/03 to it. The installation went fine and I could start the management console with no problems at all. Then I went to sunsolve.sun.com to download the latest recommended patch clusters for solaris 9 (this was yesterday Sept.-06-2006), I downloaded the file, checked it with md5sum, unzipped it, went to single user mode and ran the install_patch script. After the patch cluster finished installing I rebooted the server for the patches to take effect, I logged in, tried to run console management 2.1 and it starts OK but I cannot use any services it offers because it says (in the console events):
    "Server Not Running: no solaris management console server was available on the specified server. Please ensure there is a Solaris Management Console server available on the specified host and that it is running"
    When I click on "See Exception" I get (for a particular service that is... in this case com.sun.admin.fsmgr.client.VFsMgr - for managing file systems):
    java.rmi.RemoteException: Server RMI is null:
    at sun.com.management.viperimpl.client.ViperClient.lookupServer(ViperClient.java:376)and so on...
    I already checked that the service is running on port 898 and it seems that there is no other app. using that same port. I also restarted the service using /etc/init.d.init stop/status/start but I get the same results.
    I don't know solaris very much and don't know what else to do, please help.
    Thanks in advance.

    Well, I guess what you see isn't what you get.
    Guess I'm used to the fact USENET just left things formatted the way they were :-O

  • CE CAF Business Object, Complex Structure and external service...

    Hi,
    I want to use a web service as remote persistence in a CAF business object(Entity service). My Problem is, that the service returns a list of objects. But it seems that in the new CE the paradigm for caf changed a little and instead of complex attributes (an attribute with a structure and cardinality 0...n) you can only create an association with another business object.
    Anybody knows how to bring that together? I want to do something similar like described here:
    <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5e9ca25b-0e01-0010-bbaa-f3b963e89edd">https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5e9ca25b-0e01-0010-bbaa-f3b963e89edd</a>
    But using the new CE the Problem is, that I couldn't manage creating a complex attribute in an Entity which can then be used as mapping for a web service.
    When I create a simple attibute and replace the type with a complex one, i can do the mapping but there is an error: "The business node has an invalid main structure"
    anybody a good idea?
    kind regards and thanks alot
    Alex

    Hi Alexander,
    You are now able to create the Structure and set the cardinality also in NetWeaver CE.  I thin the following steps will be helpful for you.
    1. Create a CAF project called firstcaf.
    2.Create an entity service within the project called Customer.
    3. Now expand modeled.
    4. Then right click on Data Types. Here you will get the option "New Structure".
    5.Now select New Structure, One popup will appear then enter the Structure name called Address and click ok.
    6. Now You will get your Address structure under Complex Types.
    7.Double Click on Address. In right hand side you will get the Address structure for editing.
    8.Now from left hand side(Existing Type) expand caf.core and add your required attribute. In right hand side (structure Field) you can edit the name of attribute. suppose for Address structure I have added two field phone and mobile (both are short text ). save it.
    9. Now switch to Composite Application Explorer and expand Business Objects ->Customer -> Customer->Customer. and double click on it (Customer).
    10. In right hand side expand project firstcaf ->modeled. Now you will get your structure here, In my case I will get Address structure. Now select your structure and  click Add button. Structure will go to right hand side(Structure Fields).
    11. If you want to change the cardinality it is very simple. Select The Structure from right hand side(Structure Fields) and in bottom side click on property. Now you will get the Cardinality field. you can change it as you like.
    Thanks and Regards
    Chandan

  • Desktop Intelligence: Business Objects has stopped working in Windows Vista

    Hi,
    We have installed the BO XI 3.1 SP3 client components in Windows Vista Machine. When I was working with Desktop Intelligence, the program keep terminates irregularly. A pop-up window would appear saying "Business Objects has stopped working. A problem caused the program to stop working correctly. Please close the program." It asks me to close the program. The window always pops up even when I just terminate the BOE normally. It sometimes pops up when I was just trying to refresh the data or in the middle of working with the application.
    THanks.

    Hi expert
    I have install the BO XI into my laptop with 32-bit OS and Windows Vista Enterprise SP 2 but still experience the same error message "Business Objects has stopped working - A problem caused the program to stop working correctly. Please close the program".
    Please help as my daily task require to use BO very often.
    Thank you very much
    br
    Elwin

  • Business Objects in Vista

    Hi everyone!
    I am trying to make my first steps in Business Objects and i am trying to install Business Objects Data Integrator with Windows Vista.
    I recieve the error message that this product use Windows NT 4.0 or higher. I saw a message saying that Vista it is not supported . But my question is: Is there some work around to this situation?
               Best Regards
                      João Fernandes

    Hi expert
    I have install the BO XI into my laptop with 32-bit OS and Windows Vista Enterprise SP 2 but still experience the same error message "Business Objects has stopped working - A problem caused the program to stop working correctly. Please close the program".
    Please help as my daily task require to use BO very often.
    Thank you very much
    br
    Elwin

  • Can we link two business objects  in workflow?

    Dear All,
    Can we link two business objects  in workflow?My problem is that I have to take a standard BO for triggering my z workflow .But later  in one step  I am using BO which is Z as I am calling a standard Sap transaction in one of the method inside Zobject.
    Please let me know how to go for it .
    Kind Regards,
    Anshu Kumar

    Hi Anshu,
    You can use the standard BO as the BO for your workflow and trigeger the workflow from its event. To pass values from the standard BO to the custom BO used in the activity step, you need to do proper binding between the std and custom BO in the activity step.
    Do proper binding between event -> workflow -> task container.
    For assistance on binding in workflows refer to the followng links:
    http://****************/Tutorials/Workflow/Workflow.htm
    https://www.sdn.sap.com/irj/scn/wiki?path=/display/abap/workflow%252bscenario
    /people/sapna.modi/blog/2007/02/19/workflows-for-dummies--introductionpart-i
    Hope this helps!
    Regards,
    Saumya

  • Problem With Business Object and printing job

    Hello,
    We are encountering a problem with the application "Business Objects FINANCE", and we would need your help quickly.
    In the application , itu2019s impossible to print Consolidated Subsidiaries nor the Securities Held. If we try so, the application freezes and we can't do anything but killing the application via the task manager.
    Though, other states can be printed without problem.
    We tried on several different PCs, and the problem occured equally on each one.
    The version installed is 10.5, and we can do any tests that you think would be useful to diagnose problem.
    Our society is AUBAY SA, and our credential to enter in your support website are : S0005386617
    In attachment youu2019ll find a screenshot of the event viewer from the server where the application is install.
    Thanks in advance for your answer,
    best regards.

    check the export parameters of the event triggering workflow.
    If there is a problem, try instantiating the object in your wf based on the key.
    Also check if the wf is able to import the data.
    regards,
    Sandeep Josyula

  • UC4 to Management Jobs in Business Objects XI 3.1.

    Hi experts,
    I'm planning using UC4 to manage the jobs of Business Objects XI 3.1.
    Does anyone have this scenario? Is there any implementation guides or tips?
    Thanks
    Sérgio

    Hi Sergio,
    I can link you to one of our experts who already made several implementations of the UC4 Agent for Business Objects. You can contact me directly at Roman.Embacher @uc4.com and Iu2019ll take care that you get all information you need.
    @Community - The product brochure can be downloaded from the following web page.
    http://www.uc4.com/products-solutions/uc4-rapid-automation-packages/automated-data-warehousing.html
    Best Regards & have a great weekend,
    Roman

  • Translation Manager Business Object XIr3, problem

    Hi,
    I have a problem with the Translation Manager Business Object XIr3.
    If I understood well, it permits multilanguage users to see for example reports with their own language, setting up the preferencies, logging in InfoView.
    Now I have installed it and I choosed two languages: English(UK) and Russian.
    The problem is explained better in the following table:
    user(PVL)        |Source Language         |Substitution Language        |Reports Viewed
    English              English                     English               English
    English             English                                    Russian               Russian
    English             Russian                     English             English (sometimes I can see only Universe Objects translated)
    English               Russian               Russian             Russian
    Russian              Russian               Russian             Russian
    Russian             English                                   Russian               Russian
    Russian              Russian                English            Russian     (sometimes I can see only Universe Objects translated)
    Russian              English                     English            Russian (sometimes I can see only Universe Objects translated)
    I must explain that:
    -user(PVL) is the Preferred Viewing Language selected in the preferencies
    -source language and substitution language are the languages selected in the Translation manager interface
    -Reports viewed is the way I can read reports, after refreshing query.
    Now I ask you if, according to you, Translation manager may has this kind of problem, and, in this case, if you know how to resolve it.
    Please answer me only here in this post.
    Reguards

    Make sure to change your regional settings in the desktop control panel to tell BOE what language you would like to interact with

  • Business Objects Enterprise 11.5 FTP Transfer Problem

    Hello,
    Hopefully someone out there will be familiar with the issue I'm having and be able to provide a solution.
    We are running Business Objects Enterprise 11.5 on our Windows 2003 server.  I've created and scheduled a job on the server that creates an XLS file containing loan portfolio data that is to be transmitted to a third party client on a monthly basis.
    The problem centers around the method of transfer, which is via FTP to a secure site hosted by the client.  When executed through Crystal, the FTP actually does achieve a successful login using the credentials the client provided (we have verified this repeatedly by looking at the logs), but the client's server "kicks out" when we attempt any operation on it.
    A similar result was produced when we attempted to FTP to the site via the Windows command line.  The login was successful, but even a simple command to view the directory "dir" resulted in the connection being rejected.   To make a long story short, after reviewing the issue extensively with the client's technical department, our conclusion was that the problem was the result of the FTP sending in "active" mode instead of "passive".  We confirmed this by installing a freeware FileZilla on the same server, and switching between active and passive modes (active failed, passive did not).
    Their tech people recommended that we contact SAP to get answers to two questions, which I'm hoping someone out there may know:
    1)  How does Business Objects Enterprise 11.5 execute the FTP process?  Is it using its own native logic or simply invoking the command line?
    2)  Is there any setting with the console that would enable us to modify the FTP settings to send force it to send in passive mode?
    Thanks.

    Hi,
    This is a known limitation. BO only supports active mode for FTP. Refer 1782115 - Which FTP mode is supported as a schedule or publication destination for reference.
    If you are able to write a batch file or a program object to transfer a file from a file location to Client FTP, you can try the below workaround.
    1. Add the script\batch file as a program object in BO. In the script make sure you include the code to delete the instance after it is successfully transmitted through FTP.
    2. Create a File event pointing to the location along with the name of the instance.
    3. Schedule the report to the file location with the specific instance name.
    4. Schedule the program object based on the file event you created in step 2.
    Hope this helps.
    Regards
    Chinmaya

  • Edir OU Objects Don't appear in Management Console

    ZEN ESM Ver 3.5.0.154
    I have created OU in Console One and created a Group so I can publish Policies to the group to reduce administration. The OU does not show up in the management console. I have tried rebooting, syncronising and loggin into the OU as well, with no luck.

    Hi there,
    With build 3.5.177 almost all of the issues you described are solved. The eDirectory integration part was greatly improved - I also suffered the issues you described in the previous releases, and you had to re-create the directory configuration in order for the new eDir objects to show up. Novell client is also not required anymore - pure LDAP communication.
    As for encryption, I understand your pain as I passed for the same situation. The encryption filter driver is now improved and you'll not notice any impact on performance once you enabled it. Previous requirement for encrypting only non-system volume was almost unpracticable as no customer that I know of had more than one partition on their laptops.
    In summary, I think it's worth to take a look.
    We are here to help if any issue arises.
    Good luck,
    Daniel
    >>>
    From: chalmerst<[email protected]>
    To:novell.support.zenworks.endpoint-security-management
    Date: 5/15/2009 5:56 AM
    Subject: Re: Edir OU Objects Don't appear in Management Console
    dspinatto;1691558 Wrote:
    > There is a new version 3.5.160 available for download at 'NOVELL:
    > Downloads - Novell ZENworks Endpoint Security Management 3.5 IR5'
    > (http://download.novell.com/Download?...d=D2kn-mCL_3k~)
    >
    > I couldn't find anything related to eDir OU's in the Known Issues
    > section of the Readme
    > http://www.novell.com/documentation/...me_zesm35.html,
    > however maybe you can try with this newer version if it repeats.
    >
    > BTW, does the group shows up in the MC?
    > Have you tried logging in as a user that is member of that group and
    > then refresh the console to see it the group and the OU structure shows
    > up?
    >
    > Good luck,
    > Daniel
    >
    > >>>
    > From: chalmerst<[email protected]>
    > To:novell.support.zenworks.endpoint-security-management
    > Date: 12/2/2008 9:56 AM
    > Subject: Edir OU Objects Don't appear in Management Console
    >
    > ZEN ESM Ver 3.5.0.154
    >
    > I have created OU in Console One and created a Group so I can publish
    > Policies to the group to reduce administration. The OU does not show
    > up
    > in the management console. I have tried rebooting, syncronising and
    > loggin into the OU as well, with no luck.
    >
    >
    > --
    > chalmerst
    > ------------------------------------------------------------------------
    > chalmerst's Profile: 'NOVELL FORUMS - View Profile: chalmerst'
    > (http://forums.novell.com/member.php?userid=37214)
    > View this thread: 'Edir OU Objects Don't appear in Management Console -
    > NOVELL FORUMS' (http://forums.novell.com/showthread.php?t=352773)
    Sorry it's been a while but gave up after Novell tech sup informed me
    that this was an issue in what was the current version at the time.
    Groups that are created before the install of ESM show up and can be
    published to, however, after ESM is installed if you create OU in NDS it
    never shows up. Tech supp said this was an issue they hoped to resolve
    in future releases. Besides this issue the data encyption had problems
    as well, once the policy was published with data encryption dir the PC
    utilistation went through the roof, again a bug confirmed by Novell.
    There answer to this was a change that created bigger problems for our
    company, you could only publish encrypted data dir to non system
    volumes, however all our PCs in our company only have one partition.
    Too big a job to create additional partitions to support this change.
    I was using 3.5 ir5 when I experienced these issues.
    I am querying this with novell since there seems to be an IR6 version
    now. I doesn't show up on our product list yet. When it does I have
    been tasked with testing it again to see if the bugs are out of it.
    chalmerst
    chalmerst's Profile: http://forums.novell.com/member.php?userid=37214
    View this thread: http://forums.novell.com/showthread.php?t=352773

  • Problem with PermGen memory (Java) - Tomcat Server - Business Object XI

    We have installed Business Objects XI on a W2003 Standard with SP2 (x86), using Tomcat as web server and MySQL as DBMS. The server has 4 GB of RAM and dual-core processor. From the beginning we have been given the memory problems of the Java virtual machine. The exception that occurs is of type "java.lang.OutOfMemoryError: PermGen space failure". We modify environment variables (JAVA_OPTS) -XX: PermSize = 256m and-XX: MaxPermSize = 512m and install the monitor LambdaProbe to see the use made of memory. We note that at no time was the PermGen memory indicated by these variables, continuing in that has a default 64MB. For this reason we decided to change the Tomcat 5.5 BO included in the version 6.0.20 and also updated Java to version 1.6.0_18-b07, and make deployment by wdeploy.bat file that comes with BusinessObjects (changing config.tomcat55 and tomcat55.xml). The deployment was successful and everything works, but as with the previous version of Java / Tomcat, shortly PermGen memory fills and returns to "hang". In this latest version of Tomcat installed as a service, do not use environment variables, use an application, "Configure Tomcat", which is a tab to pass parameters to the JVM. After looking at many sites, I have seen to be putting "-D" to pass the parameter. Currently this is my configuration:
    -Dcatalina.home = C: \ Program Files \ Apache Software Foundation \ Tomcat 6.0-Dcatalina.base = C: \ Program Files \ Apache Software Foundation \ Tomcat 6.0-Djava.endorsed.dirs = C : \ Program Files \ Apache Software Foundation \ Tomcat 6.0 \ endorsed-Djava.io.tmpdir = C: \ Program Files \ Apache Software Foundation \ Tomcat 6.0 \ temp-Djava.util.logging.manager = org.apache.juli . ClassLoaderLogManager-Djava.util.logging.config.file = C: \ Program Files \ Apache Software Foundation \ Tomcat 6.0 \ conf \ logging.properties-Dcom.sun.management.jmxremote-D-Xms2g-D-Xmx2g-D -XX: + UseConcMarkSweepGC-D-XX:-D PermSize = 256m-XX: MaxPermSize = 512m-Daf.configdir = C: / Program Files / Business Objects / Dashboard and Analytics 12.0-D-verbose: gc-D-XX : + PrintGCTimeStamps-D-XX: + PrintGCDetails
    I tried changing the values of-XX: PermSize and XX: MaxPermSize, and modifying the various policies of the Garbage Collector (-XX: + UseConcMarkSweepGC,-XX: + UseParNewGC,-XX: + UseParallelGC, ...), but nothing. Any idea how to get change the value of the report? Or how to solve this problem?
    Thank you!

    Victor,
    Is the Product you are using BusinessObjects Enterprise XI (Release 1)?
    With XIR2 and XI31, Tomcat 5.0 and Tomcat 5.5 are included with the software, and when installed with the BOE installer, you will get an application installed to the startmenu named "Tomcat Configuration".
    Using this "Tomcat Configuration" utility, there are several configuration options available.  On the JAVA tab, you will see the JAVA_OPTS that are set (These are prefixed with "-D") and also your initial and max memory sizes are listed at the bottom (Max 1024 by default in XI31).
    Here is the default setting for permsize in XI31 Tomcat:
    -XX:MaxPermSize=256M
    From your post, your issue might be the spaces in between your values (there should be no spaces, each "-" parameter on its own line).
    I would suggest starting Tomcat and reviewing your stdout.log file to review what options were set.
    Hope that helps
    -Brian

  • Problems loggin in Oracle Enterpirse Manager Console

    Hi. I installe oracle 9i and managed to setup a development and OEMREP databases and successfully logged into the Enterprise Manager Console. But after a few days, out of the blue, I can't login anymore.
    I'm getting the following error msg:
    "The exception (oracle.sysman.emSDK.client.omsClient.ClientException) ocurred"
    Did anyone encounter the same problem?
    Any ideas?
    Thanks!!

    This has happened to me many times. First look at the node status in oem, probrobly is stating that it is out of sync. Even if it isn't save all your jobs to the library. Delete the node. Then on the solaris side
    shutdown the agent, delete the *.q files out of the $ORACLE_HOME/network/agent directory, then restart the agent. Now back on oem rediscover the node. You should then be able to resubmit the jobs from the library.

Maybe you are looking for