Business Objects Mobile (V 11.5.0) - Issues

Hi,
I saw one issue in this version of BO Mobi.
The Call Link works fine in windows mobile but the SMS Link fails and gives an error on windows mobile device.
I first tried the BO Mobi Demo from the Business Objects Website and worked fine. Now when I try to do that the installer gives me an error.
If anyone know how to get the SMSto thing working please let me know.
Thanks,
Chinmay

Rick,
I believe you need to use CR XI R2 with BOE XI R2. i.e. you need to upgrade to CR XI R2. (11.5.x.xxx)
CR XI (11.0.0.2269) is Crystal Reports XI R1
BO XI (11.5.8.825 ) is BOE XI R2 SP2.
Best.
Srinivas

Similar Messages

  • Installation Business Objects Mobile

    Hi guys.. i want to install Business Objects mobile but i have question but i want to know if i can install Business Objects Mobiel over the same server of Business Objects XI, i believe that the Mobile server should not need a lot of resources...theres any technical restriction or its mandatory to have a dedicated server for this...
    Regards

    Hi guys yes i found the supported platforms and it could be installed on the same server but..... when i ve installed on the same server of the XI (Win 2008 Server) i found that theres some incompatibility of Mobile and Win 2008 and it didn´t run for me; finally i installed on a 2003 server on a separate server and i it works fine
    Edited by: Oscar Díaz on Sep 23, 2010 11:02 AM

  • SAP Business objects mobile on Android - No connections

    Dear All
    I have downloaded the SAP Business objects mobile app on my Android smartphone. The smartphone has a VPN connection to our company network.
    With the IPad I already managed to get a connection to our BO server and I am able to see our mobile reports (Webi+Dashboards).
    But other than on the IPad I am not able to see on the Android a connection to our BO server. I neither see the option to create a new connection. All I see is the 'SAP Analytics Gallery'.
    Is this the correct app or do I need any additional authorisations or any other downloads to be able to get a connection? 
    I hope you can help me.
    Best Regards
    Danya Liebig

    Hi
    I think you've already logged into the Analytics gallery in your workflow.
    you need to go to the 3 dots/lines > (icon top right hand corner) > settings > application settings > Connections > new connection
    like this:
    regards,
    H

  • Business Object Mobile

    Hi,
    I am a  newbie to BO Mobile and have a very basic question regarding it,I am not able to understand how do i get the client for the application.In the help file its not written if we have to create a client ourself or there is some sample available for  the testing purpose.
    Can you guide me on the same.
    Regards,
    Abhishek Ranjan
    Amadeus Labs

    Hi Mobile OTA  is for installation Over The Air....its always difficult to implement that because need a webserver and has its own issues, if you want to test another option is load and install the application on the phone directly in the folder you can find blackberry, nokia and windows installation files....above the OTA you must follow tha installation document in help.sap.com if follow that and i could make it work the same reccomendation for config.ini files...you must consider all the factors are explained in the document.
    Search something with *blackberry or *nokia
    Regards

  • SAP Business Objects 4.1 - American Date Format Issue

    This issue is something that keeps arising, if your viewing a crystal report, or building a new Webi report in 4.1 and viewing it, the date format seems to come out as M/D/YYYY HH:MM:SS, this never happened in 4.0.
    I will give an example, today I updated a 4.0 to 4.1 using the update path in a development server, and updated to 4.1 SP03 which is the latest. When I decided to write a Web Intelligence Report or create a Crystal report and publish this, all the date formats came out in American date format, and not the standard English one DD/MM/YYYY HH:MM:SS anymore. However if I go to the Live server which I haven't yet updated and is still on 4.0 SP04 Patch 11 and perform exactly the same its in English format as it always was.
    Can someone please enlighten me to what has changed from 4.0 to 4.1 in terms of configuration regarding the date formats changing.
    My server regional settings are English, and using the default GMT date time, so is my machine. 4.0 works 4.1 doesn't work the same.
    I have tried changing the .prm files in the connectionserver\dataaccess folder as well, this doesn't seem to make a difference and also used LOV's in universe objects and when using these in prompts you get ameican format. I have also changed the preferences in the BI Launch Pad to view English locale and the GMT date time for Greenwich Mean Time. 
    Please can someone advise or suggest where I am going wrong here and how to solve this.
    Many Thanks

    Thanks for your quick response. I have done the check on the universe design tool. I have tried the options - Migration forced and set English (UK). I purged the LOVs and refreshed. No luck as yet. Checked the locale and seems to be fine. When i change the BI launchpad - Web Intelligence preferences to HTML, then the LOV displays correctly - dd/mm/yyyy. The behaviour only occurs when displaying LOV in Applet mode. Maybe will have to look at some Java settings. Thanks
    Added Update- I created a variable =GetPreferredViewingLocale() and tested in WEBI Report with a date object. When I use the BI launchpad Web intelligence Preference to HTML - it display EN_GB. When  I use the BI launchpad Web intelligence Preference to Applet - it display EN_US. It seems to be taking preferred viewing locale as US in applet mode is there a way to fix this please.
    Added Update - It was a bug on Infoview and has been resolved on SP4 . The ADAPT Ref is ADAPT01718291. Just finished testing on UAT, going Live next week with SP4. 

  • Guide to develop on Business Objects Mobile XI

    Hi,
    I need a guide where I can find some tips or helps so I can develop some reports to show them on my Mobile.
    I can only find some guides where I can setup the server but I have everything working I have connection to our Server and I can start up my Blackberry Simulator on BO XI but is there a sort of SDK or is it just writing some reports put it on my server and test it with the Simulator.
    If it is just writing reports, could I write theme with Xcelsius and deploy the on my server. I'm a little bit confused because I read/saw everything about the new 4.0 version of BO Mobile and there are some SDK's coming out Sybase and Samsung SAP Mobile SDK's.
    Kind regards
    Nico

    Hi,
      Looks like you are trying to use the new Mobile 4.0. Try reading this document
          http://help.sap.com/businessobject/product_guides/boexir4/en/xi4_mobile_user_en.pdf
      Pay extra attention to "Interacting with Business Intelligence Documents" (p23) section. This will give you a high level overview what type of document you can view via Mobi. Hopes it helps.
    Ken

  • Unicode error in business object ECC6

    Hi all,
    We upgraded from 4.6c to ECC6.
    While executing a business object we got the syntax following error in ECC6.
    The program "Z_2005PP" is not Unicode-compatible, according to its program attributes
    We dont know how to solve it, becauseZ_2005PP is a business object.
    How to solve this issue?
    Regards,
    Kumar.

    You can unicode enable the Business Objects programs by following steps :
    1)     Execute PROG u2018SWO_SET_UC_FLAGu2019
    2)     Provide object type.( In your case Z_2005PP )
    3)     Execute.
    4)     Result
    This should resolve the error.
    Regards,
    Vasuki

  • Error while generating the Business Object in Mobile Sales

    Hi,
    I made changes to the Business Object BOCAPGEN.
    Now I am trying to generate the business object but it is giving out the error saying
    Error intializing RT Generator !.RT Generator Failed for ".Error arsrep.dat is in use so Generation cannot be done
    I am not a MSA Developer and have no clue regarding MAS(Mobile Application Studio)
    So any one can please give me a clue regarding the issue
    I have solved it by closng all other application other than client console
    Thanks Guys
    Message was edited by: zack taylor

    Hi !
    1 year later, I am facing the same problem.
    I want to build MSA 4.0 SP8, everything runs fines until the end of the generation of the Tiles, the next step fails :
    Error intializing RT Generator !.RT Generator Failed for ".Error arsrep.dat is in use so Generation cannot be done
    Then around 10 thousands of error messages of that kind follow in the output window ; howeverin the end it says "Generation End" without telling whether it was successful or not (the first time the output window was too small, I thought all was OK )
    Anyways, the Mobile Sales icon appeared on the desktop and when I try to launch it I get the error "Starting MobileSalesfailed".
    During another attempt, I check with "Unlocker" the 2 arsrep.dat files I found under the BOL directory, it reported that none was used and locked at that moment.
    Also I killed the vbagen.exe process before starting the build, but it was automatically launched after. (first build was launched after a reboot, the 2nd after the 1st failed + vbagen.exe process killed)
    Does anyone have any clue ?
    Another question is : what are the rights required ? I am a local administrator but I do not have full admin rights (the only thing I saw at the moment is I cannot access to Add/Delete Programs in the Control Panel)
    Thanks & Regards,
    François
    -edit-
    thanks to the one who moved it to the right forum
    Message was edited by:
            Francois Feugier

  • Re: Error while deploying Mobile Business Objects to Unwired Server

    Hi,
              I am new to SUP.    When i am trying to deploy my Mobile Business Object  into Unwired Server, I am getting an Exception like this
    *com.sybase.security.SecException : could not resouce with the ID of domain:// at Com.sybase.sup.admin.server.ServerAdminImpl.checkAccess*
    Can Any body  please help me how to resolve this.     Thanks in Advance.
    Regards
    Balu

    Hi,
    Its look like licesne issue. please check server log.
    Thanks

  • Performance issue with Business Objects Java JRC API in CRXI R2 version

    A report is developed using java JRC API in CR XI release 2. When I generate the report in the designer, it took less than 5 seconds to display the results in crystal report viewer inside the designer. But in the QA environment, when I generate the same report from the application, it takes almost 1 to 1.5 minutes to display the same results in PDF. I also noticed that if the dataset contains bigger volume of data, then the reports are taking even longer almost 15 to 20 minutes.
    While generating the report from the application, I noticed that most of time is taken during the execution of the com.crystaldecisions.report.web.viewer.ReportExportControl Object method as shown in following line of code
    exportControl.processHttpRequest(request, response, context, null)
    We thought the delay in exporting the report to PDF might be the layout of the report and data conversion to PDF for such a bigger volume of data.
    Then we investigated the issue and experimented quickly to generate the same report with same result set data from the application using XML, XSL and converted the output XSL-FO to PDF using Apache FOP (Formatting Objects Processor) implementation. The time taken to export the report to PDF is less than 6 seconds. By doing this experiment, it is proved that the issue is not with conversion of data to PDF but it is the performance problem with Business Objects Java JRC API in CR XI R2.
    In this regard, I searched for the above issue in the SAP community Network Forums -> Crystal Reports and Xcelsius -> Java Development -> Crystal Reports. But I did not find any answers or solutions for this kind of issue in the forums.
    Any suggestion, hint in this matter is very much appreciated.

    Ted, The setReportAppServer problem is resolved. Now I could able to generate the report with hardcoded values in the SQLs in just 6 seconds where as the same report was generated in CRXI R2 in 1 minute 15 seconds as mentioned in the earlier message.
    But, our exisiting application passes the parameter values to the SQLs embedded in the report. For some reason the parameters are not being passed to the report and the report displays only the labels without data.
    As per the crj 12 samples codes, the code is written as shown below.
    1. Created ReportClient Document
    2. SetReportAppServer
    3. Open the report
    4. Getting DatabaseController and switching the database connection at runtime
    5. Then setting the parameters as detailed below
    ParameteFields parameterFieldController = reportClientDoc.getDataDefController().getParameterFieldController();
    parameterFieldController.setCurrentValue("", "paramname",paramvalue);
    parameterFieldController.setCurrentValue("", "paramname",paramavalue);
    byteArrayInputStream = (ByteArrayInputStream)reportClientDoc.getPrintOutputController().export(ReportExportFormat.PDF); 
    6. Streaming the report to the browser
    Why the parematers are not being passed to the report?  Do I need to follow the order of setting these parameters?  Did I miss any line of code for setting Params using  crj 12?
    Any help in this regard would be greatly appreciated.

  • Issue regarding [Work Flow] Business Object Event Raise in ABAP Program

    Hi All,
    I have one issue regarding [Work Flow] Business Object Event Raise in ABAP Program.
    Actual TDS is as below:
    If E message type written, raise Business object BUS2005 (Production order) Event PickShortage for production order passing warehouse, transfer request
    (BUS2065 Object key) in event container. Also include table of text version of error
    messages for this set of Transfer
    Request.
    Can anybody tell me how can i write it technically in ABAP Code.
    Can anybody solve this issue!
    Thanks in advance.
    Thanks,
    Deep.

    Hi,
    Can anybody solve above posted issue!
    Thanks,
    Deep.

  • Replacing Business Objects - Modelling Issue

    I'm working on a large 'BI' project that is replacing Business Objects with OBIEE ( actually its not really a BI project its more of a give us what we've got now using OBIEE project ) - which is proving challenging in some areas.
    One example is with the Data Model that BO provides in its Universe, the model I'm replacing is pretty much 3NF (even though it uses DIM and FACT in the table names) they're joined pretty much all over the place, which enables the users to select from tables which can be 4,5,6 steps away from the original - including via M:M relationships!
    Anyway one specific issue is based around the old question of multiple fact tables where not all dimensions are conformed.
    Dim - Business Manager ---< Fact - Forecast >----- Dim - Product -----< Fact - Actuals >------ Dim Salesman
    I've setup the Dimensions for each Dimension Logical Table.
    I've created a single logical table containing a Forecast and Actual Amount from the 2 fact tables and set the logical levels appropriately at Table Level. For the Forecast measure I have a logical level set to 'Total - Salesman' and for the Actuals measure I have logical level set to 'Total - Business Manager'.
    This works great when I select an Attribute from Business Manager, and Salesman and both of the measures in the Answer.
    However the users want to be able to select from Business Manager, and Salesman dimensions without selecting the measures, is this possible - do I need to add a bridging table to resolve the relationships between a Business Manager and Salesman explicitly rather than implicitly via the facts?
    I have set Implict Fact at the Presentation Model, however this doesn't work (it misses off Total Level aggregation in the OBI Server SQL).
    Thanks in advance for any suggestions/answers.

    Thanks for the helpful reply Turribeach, along with the interesting and informative link.
    This is my first foray into the world of BO and I think some of the points you make in the link are right on the money. I've spent many years working with Oracle Tools (Dataquery,Data Browser, Discoverer and then OBIEE when Oracle acquired the tool ). There are difficulties in the modeling with OBIEE, certainly when it comes to trying to replicate a 'fairly' complex BO universe they become apparent.
    Many hoops to jump through to give the user a like for like, which I'm not convinced will be possible - maybe some negotiation is required :-)

  • Crystal reports / business objects - RAS timeout issue

    Hi,
    I am experiencing a problem in my Java application in viewing a report generated by Crystal Report. Let me start off by saying I'm not entirely sure that the problem is with Weblogic, but at the moment it seems likely to be.
    The Java app uses the RAS in Business Objects to get/display a report. There is a timeout setting on the RAS server and once this has elapsed, the next request from the Java web app causes a timeout error. Code in the Java app handles the timeout and makes a new connection to the RAS and displays the report (the error and re-connection is all seamless to the end user).
    This was all working fine until recently when the server was upgraded from Windows 2000 to Windows 2003. Now when the Java app makes a request after the timeout has elapsed there is no error returned and instead the process continues and a blank page is shown on the web page.
    On the Business Objects side of things, one of the log files states a "received invalid request" message which seems to indicate the Java app is sending it something unrecognisable. So my question is, are there any known issues with Weblogic server under Windows 2003 that could be causing this problem? I'm running version 8.1 SP3.
    Since the problem has arose I've tested the Java app on a Windows 2000 and Windows XP environment (both 8.1 SP3) and the timeout occurrance and handling works as expected. I've raised a support request with Business Objects but from previous experience I know they will take a while to respond. So any help about this from you guys will be much appreciated.

    Hi,
    I am experiencing a problem in my Java application in viewing a report generated by Crystal Report. Let me start off by saying I'm not entirely sure that the problem is with Weblogic, but at the moment it seems likely to be.
    The Java app uses the RAS in Business Objects to get/display a report. There is a timeout setting on the RAS server and once this has elapsed, the next request from the Java web app causes a timeout error. Code in the Java app handles the timeout and makes a new connection to the RAS and displays the report (the error and re-connection is all seamless to the end user).
    This was all working fine until recently when the server was upgraded from Windows 2000 to Windows 2003. Now when the Java app makes a request after the timeout has elapsed there is no error returned and instead the process continues and a blank page is shown on the web page.
    On the Business Objects side of things, one of the log files states a "received invalid request" message which seems to indicate the Java app is sending it something unrecognisable. So my question is, are there any known issues with Weblogic server under Windows 2003 that could be causing this problem? I'm running version 8.1 SP3.
    Since the problem has arose I've tested the Java app on a Windows 2000 and Windows XP environment (both 8.1 SP3) and the timeout occurrance and handling works as expected. I've raised a support request with Business Objects but from previous experience I know they will take a while to respond. So any help about this from you guys will be much appreciated.

  • Business Objects XI R2 Launchpad issue

    Hi All,
    We just recently upgraded to Weblogic 9.2 and we are using Business Objects Enterprise XI R2 on the server. Everything was working fine on the previous version of Weblogic 8.1 SP4.  
    Scenario 1.
    Open up new webpage with the launchpad and you click on Central Management Console Link then you ALT TAB back to the Launch Pad and Click InfoView Link you get an Error "From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1";
    Scenario 2.
    Open up new webpage with the launchpad and you click
    on InfoView Link then you ALT TAB back to the Launch Pad and Click Central Management Console Link you get an Error "From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1";
    Scenario 3.
    Open up new webpage with the launchpad and you click
    either InfoView Link or Central Management Console Link then you ALT TAB back to the Launch Pad and REFRESH the web page you get an Error "From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1";
    Any help would be great in helping us solve this problem.
    Thanks in advance
    Rick
    Edited by: Rick W Phillips on Sep 29, 2008 3:25 PM

    Hi,
    Cause of this issue :
    Once the Job Server recieves the scheduled job and spawns a new child process, the child process is unable to complete the job. The child process constantly is waiting to load the job. Looking further into the log and specifically the startup script, the -port option was incorrectly used (-restart-port) and didn't allow the child process to bind to the correct port using the correct DNS name. 
    In Order to resolve this issue follow the steps given below..
    1.Open CCM
    2. Stop Server
    3. Right Click Server and go to Properties
    4. insert -port option in to command line, example below
    ex. "
    win2k3\C$\ProgramFiles\Business Objects\BusinessObjects Enterprise 11.5\win32_x86\JobServerFullClient.exe" -service -name win2k3.Desktop_IntelligenceJobServer  -ns win2k3 -objectType CrystalEnterprise.FullClient -lib pp_procFC  -jsTypeDescription "Desktop Intelligence Job Server" -maxDesktops 0 -restart -port win2k3.it.bo.example
    5. Save setting and restart server.
    Hope it helps.
    Regards,
    Sandeep Singh

  • Issue With Business Objects Installation-STW00213 The Central Management Server has failed to start.

    Hi,
    I am in the process of installing Business Objects XI 3.1 in one of our server. While installing I am getting the error 'The Central Management Server has failed to start. Press 'retry' to attempt to start it again or 'cancel' to skip any actions dependendent on the Central Management Server. STW00213.'
    I have tried re-installing the BO, and also tried installing without giving admin password. But it doesn't work. And also I ahve tried giving the passwords of database and CMS Admin without Sepcia Characters. But it also doesn't work.
    If I cancel and install the BO, Server Intelligence Agent is not available in Central Management Server.
    Could anyone help on this issue?
    Thanks
    Prakadesh

    Hi Prakadesh,
    Try these steps.
    1. Stop and disable the service of current SIA. You can do it from start-->run services.msc. Double click the SIA service and change the status to disable.
    2. Login into sqlplus and drop all the CMS tables.
    3. Create a new SIA pointing to Oracle from the CCM.
    4. Start the new SIA and check if all services come up and you are able to login into Manager servers.
    If this does not work, check the event viewer for error messages.
    Regards
    Chinmaya

Maybe you are looking for