Business Objects Server

Hi,
Is there a way to create an alert in BO server if the report runs longer than certain expected time.
Thanks!!

Hi,
As far as i know you can create the alerts on the reports and for more information you can refer the admin guide of the BOE version you have installed.
If you don't have the guide then you can visit the below site and search for the admin guide:
http://help.sap.com/
-Noor.

Similar Messages

  • Running XI and 6.5 Services on same Business Objects Server

    We are currently thinking about  migrating to Business Objects XI from 6.5 SP4.
    We are running with a 3-tier architecture, with the Business Objects services running on a Windows Server.
    Due to the number of users and reports in circulation we would like to do the migration in phases.
    Is it possible to run both the XI and 6.5 services on the same Business Objects server at the same time?

    That's actually a migration secanario so it should work fine. I had no trouble with 5.2 and 6.0 on the same system.
    Tom

  • Report works in Designer client, but not after published to Business Objects server

    Has this happened to anyone else?  I have a couple of reports that work perfectly on my pc in the Designer client.  I can export them to whatever format I need, and they work.  When I save them to the Business Objects server, everything appears to be ok.  The thumbnail on the properties tab shows the correct report with a page full of data.  When I preview and when I schedule the report to run, I get incorrect data.  In one case, I get an empty report.  In another case, I get data, just wrong data and way too much of it.  I've got hundreds of other reports that were developed and published the same way that are working correctly.  Any ideas?  Thanks in advance!

    There may be couple of reasons. What is your data source? Verify the database in the report and check it again. Or to do more crosschecking, Create a simple report using the same database and deploy in BOE.

  • Use a dynamic list of email addresses to email a report via Business Objects Server 11

    Post Author: wolfgang666
    CA Forum: General
    I use Business Objects Server version 11 to distribute reports via email but was asked if there was a way to only send the reports to those people listed in the report (which changes daily) instead of the entire distribution list. I can create a list of email addresses as a variable within the report but can't find any way to pass it to the Business Objects server "To:" field located in the destination screen. I would expect to see some option for sending to some value located in the report but alas no such option is evident. This seems like a feature the product should be capable of doing as it is so basic. Any other way to do this that anybody can think of? Any help is greatly appreciated. Thanks.
    Matt Frazier

    Hi Alan,
    The simplest thing would be to simply use the Import Wizard to create a BIAR file and then back up the required CR's and instances to the BIAR file. So for instance you would use the "Import Folders and Objects" option. So the source system would be the system you are decomissioning and the Destination would be the BIAR file. Once that is done you can use the BIAR file to import the report content into another system in the future.
    <<Text removed>>
    Kind regards,
    John
    Edited by: Matt on Oct 10, 2011 10:20 AM

  • Cons of installing installing IIS on Business Objects server

    Hello Everyone,
    Kindly help me with a doubt, how Business Objects server is going to be affected if we will install IIS in it. Cause I have another WCF application and have to host on the same server for which I need IIS to be installed.
    Thank you for your time and patience!
    Soubhagya Kumar

    There is a .NET version of InfoView/BI Launchpad and the CMC that you would have to install after installing IIS.  However, they are missing some functionality that your users may want/need - in particular in the Webi application.  I know that at a former employer, I had to move off of our initial install on IIS to Tomcat because users couldn't run the Java versions of the Webi viewer and designer, so they couldn't get to some of the more complex analysis tools in their reports.
    I did a quick search but was unable to find the specifics on this.  Hopefully someone from SAP will check this thread and provide a link to some sort of comparison document.  There is a mention that the comparison between the HTML viewer/designer and the Java applet will be published soon (as of last November) here http://scn.sap.com/community/businessobjects-web-intelligence/blog/2012/11/06/webi-influence-council-qa-and-presentation-from-teched-las-vegas.
    -Dell

  • Demo version for SAP Business object server

    I would like to try the Business object server to work with Crystal reports. could you please let me know the download link for the latest available version of the BO Server/Web Intelligence /Dekstop Intelligence. Is there any demo version available for me?

    Hi,
    Crystal reports u can get it for demo  but Bo Server, webi u cannot u need to install it or the other thing u can do is to take a remote access form somewhere(on monthly basis at a  minimal cost ) and try playing around .

  • HELP: Business Objects server flag

    Morning,
      I was wondering if it is possible to create a flag on the business object server side that will allow scheduled users reports to start (execute) after certain cube loads are complete? Any advice or info are greatly appreciated!
    Thanks,
         Thomas

    Thomas ,
    yes its called event  based scheduling. u create events in CMC to achieve this. Typically after ur loads are done they have to generate a file which sits in a folder in the server. your events in bobj shoould moniter the file creation and then kicks of the schedules. Usually there wud be dedicated event servers for bobj. talk to your admin in these lines.
    Thanks,
    Karthik

  • Websphere connect to business object server

    how configure business object server ?
    special:
    in Central Management Console,
    BusinessObjects Web Intelligence  configer  and Preferences set.

    Business object - are you talking about crystal (now part of business objects) if yes to connect you need to buy business objects integration kit for SAP from them
    Raja

  • SAP Log on into Business Objects server not working (Error FWB 00014)

    Hello,
    I recently installed Business Objects XI 3.1 Edge series, I am able to logon to enterprise and everything is working fine. I am even able to import roles from SAP system but I have two problems.
    1. Logging on to enterprise using SAP user: I am getting the following error message when I choose SAP in the Athentication and enter SAP username and password and click log on.
    "Account Information Not Recognized: All of your system's 0 Concurrent Access Licenses are in use at this time or your system's license key has expired. Try again later or contact your administrator to obtain additional licenses. (FWB 00014)".
    2. Logging on to SAP system through SAP Logon pad: When I enter my username and passord in SAP system from the same server as I installed BusinessObjects I am getting a run time error.
    Did any one of you had the same problem or does any one of you have any clue how to solve this?
    Thanks in advance.

    Hi,
    I assume that you have a key for named licences (You can check this in the CMC under Licence keys).
    What you need to do is to go in the CMC, navigate to Authentication->SAP->Options and select the Named users option.
    Regards,
    Stratos

  • Regarding the SAP Business objects Server configuration

    Hi Experts ,
    I was newly entered in to SAP Business Objects .Kindly i am requesting can you please let me know the follwing details .
    1) Latest server configuration of the SAP Business Objects .
    2) Latest version of the Crystal reporting / Desktop Intelligance / Web Intelligance / Universe.
    3) And also if do you have any document releated to the server configuration of the SAP Business objects kindly can you aatch the mail.
    Thanks and Regards,
    Vijay.

    The latest available version of the BO Server/Web Intelliggence /Dekstop Intelligence is XI 3.1 SP3 with FP 3.4.
    The latest available version of CR is CR 2008 SP3 with FP 3.4.
    You can find the latest documentation for Business Objects here:
    http://help.sap.com
    Regards,
    Stratos

  • Copy reports from one business objects server to another

    How do I copy all the reports published in my production BO server to my test server. I did this once but can not remember. Is it the import wizzard?

    yes you can use the import wizard to export your reports from one server to another server
    just open the import wizard, connect to your source server, choose object types you want to export (folders, reports, users,,,,etc),,, then choose the objects itself, then connect to the destination server, and the import wizard will guide you through this process.
    good luck

  • Transferring the Business Objects Server to a another Windows 2003 Domain

    Greeting Everyone
    I am in the process of moving the BOX1 Server (Windows Member) from one Windows 2003 Domain to another and want to make the movement as smooth as possible.
    I am in the process of making a checklist on what needs to be done before and after the movement of the BOX1 Server. With your expertise can you please advise me on the points to be considered on this movement.
    Thanks in advance
    Regards
    Venkat

    Hi Tim
    As usual thanks for your prompt response.
    I am using BOX1 R1 which is working in an unique way (defy all rules) in my environment. The server is located in Domain ABC and the users are located in domain XYZ. That means user is in one domain and server in another domain. Now we going to place the server in the same domain where the users are.
    The answers to your questions are
    Is this just the server that is moving?  Yes. The server is moving from ABC to XYZ
    Is the domain in the same forest as the original? No, They are independent Forests with 1 way trust relationship
    Are all the users that login going to keep using the same domain? Yes.
    What I am worried is that if I move my server between independent forests then all the SIDs (not sure) of the server will also change to my understanding. Worrying part is that will it hamper the the functionality of the server.
    Please also note that FQDN and the IP address will also change.
    Please advise and Thanks once again
    Venkat VS

  • PortalRuntimeException in Business Object document iview No portal component associated with the following context

    Hi all,
    We are stumped with a problem in our QA Enterprise Portal (7.3.1 Sp7) that throws a portal runtime error when we preview a Business Objects document iview.  The Business Objects Server versions are 4.0 SP5 and/or 4.1 SP3.
    The error is caught in the the defaultTrace file, /usr/sap/QNW/J00/j2ee/cluster/server0/log
    [EXCEPTION]
    com.sapportals.portal.prt.runtime.PortalRuntimeException: There is no portal component associated with the following context:
    pcd:portal_content/com.summit.SES_BI/com.summit.iviews/Daily_Margin
    at com.sap.portal.prt.component.PortalComponentContext.<init>(PortalComponentContext.java:93)
    Here is what we have tried
    * Confirmed the iviews exist in the PCD, by browsing to the content folders and right lick, preview on the iview.
    * Our PRD and DEV systems work correctly and are on same versions of EP Runtime and java. 7.3.1.7.0.201..
    * Occurs with all Businessobjects iviews from the QA portal and all doc types, webis, dashboards. Tried creating new iview.
    * Reapplied the com.sap.businessobjects.iviews.templates.epa to the Portal from t he BI 4.1 SP3 distribution
    * Deleted and recreated the BI portal system connector using the SAP BOBJ system template set path to http://bi-qas:8080/BOE
    * Set the embed key value in the BI system connector property and in the custom global.properties file, restarted tomcat and SIA services
    * Set permissions for everyone end user on the content folders and the BI system connector
    * Confirmed Single sign on configured correctly between BI and Portal
    * Confirmed that the QA BI server is configured correctly by directing the working DEV Portal to the QA BI server.
    * Performed actions in note 1709737
    We are certainly stuck and the defaultTrace file is not very informative.  Any suggestions are greatly appreciated
    Lee Lewis

    This is resolve with note 1615838  - SAP Netweaver Enterprise Portal 7.3 iView creation with BI 4.0 results in exceptions.
    The note includes a file portalapp.xml that need to be inserted into com.sap.businessobjects.iviews.par that is included in the BI server distribution.
    Then deploy the ear file.....
    Odd thing is that the note mentions 4.0 and we are on 4.1 SP3...
    Environment
    SAP BusinessObjects BI Platform 4.0 SP02 Patch 4 or lower
    SAP Netweaver Enterprise Portal 7.3
    Lee Lewis

  • Business Objects XI report timeout

    Hi All,
    I'm running a quite simple environment:
    Windows 2003 R2 SP2
    IIS 6
    Oracle Database (remote on Linux but same subnet)
    Business Objects Server XI R1 SP3.
    I'm having an issue with reports getting time out errors after 2 minutes before they have had a chance to complete.
    What I want to do is increase the setting that lets the report run before it errors. I can monitor my database and still see SQL being passed when the 2 minute limit is reached.
    I have changed the 'Default Website Properties' Connection Timeout setting in IIS to 500 seconds and restarted, this has not helped the problem. I have looked through all the settings under Servers in the CMC, I can't see the right one. I'm not asking for the connecting setting before I need to log back in, I need the setting that will let a report run for 10 minutes before it errors.
    If I run a problem report via Schedule, it completes but is very close to 2 minutes. If I run it On Demand, it times out after 2 minutes, but I can still see the query selecting data then gets terminated.
    Thanks in advance, Jason.
    Edited by: Glenn Rieger on Oct 20, 2008 2:52 AM
    Edited by: Glenn Rieger on Oct 20, 2008 2:55 AM

    I had the same problem on a 12 mo cost report that produced 95,000 records and read close to 400,000.  Could only run 4 months. 
    Changed the "Database Records Read When Previewing or Refreshing" parameter to 0 (unlimited) in CrystalReportsProcessingServer
    and changed the "Maximum Cache Size (KB)" parameter in CrystalReportsCacheServer from 250,000 to 500,000 - then it would run.
    Sorry, wrong thread I think - I was getting "max processing time or max records limit reached" error message but I think my problem was max records rather than timeouts.
    Edited by: Richard Carlson on Dec 22, 2008 9:03 AM

  • Business Objects InfoView translation (without language pack)

    Hello, everyone,
    We need to translate SAP BO InfoView interface. The language we require doesn't have native BO language pack.
    We discovered a bunch of .properties files, translated them, but not all of the texts was converted.
    Maybe someone could give me some advices, or some ideas for solution?
    Thanks.

    Thank you for your reply.  The report is using an ODBC connection to the Access database that resides on the Business Objects server.  It is setup as a System DSN on that box, using the Microsoft Access Driver (*.mdb, *.accdb) - as the Access db is v2007. 
    I can run the report on the server using this ODBC connection, and I'm assuming that when I run the report on demand in InfoView, it is using this connection as well.  The problem is only presented when I attempt to schedule the report.  The datasource is there as well.

Maybe you are looking for

  • Replacing nav bar--is there a way to change all pages at once?

    I widened my site off of an iweb template and now the nav bar looks bad since it's too narrow and there is text that appears outside of the nav bar background. Since I can't change the color or looks of the nav bar, I've decided to put my own on top

  • If I delete an SMS message en route, is there a chance the recipient still receives it?

    I have iOS 5, and my question pertains to standard SMS, not iMessage.  I live in an area with a poor cell signal.  I often get message send failures in SMS.  Other times, it goes through but takes a long time.  The only upside to this is that it give

  • Consignment and non consignment material

    Hi All,              I need to understand  and need help on below situation I have Material A with below scenarios Supplier 1 supplies it on Consignment Supplier 2 supplies it on Non-Consignment Is it possible to have this scenario,can we setup in th

  • NI Vision Development Module VI Missing

    I working in LV 2010.  Everything was working fine.  Full vision development was working fine.  I had access to all of the edge detect, gap measure VIs, etc.  Then in a moment of stupidity I installed 2014 vision development.  Now I realize that was

  • Bug in blog summary breaks links from entries (CGI encoding?)

    I'm using iWeb'08 2.0.4 (830A43). I use a lot of links in my blog entries. The links in the entries work however the blog summary misinterprets some links and breaks them. For example the link in my blog entry that works is: http://yaleglobal.yale.ed