Business Objects Webi Report looks at the wrong universe

Hi,
Problem: A Webi Report that is believed to be running off Universe A in Dev A Environment no longer works because for an unknown reason it is trying to run off Universe A (same name different version) in Dev B Environment where most of the objects do not exist.
Universe A has not been changed in either Environments. Reports were working yesterday but not today (reports were not changed too).
Any ideas what may have caused this? The only way we were able to find out that it was using the wrong universe was when we checked the Universe in the properties of the Query.
Many thanks.

hi Saleem,
in the above senario, how can a WebI report automatically catch Bad Universe. (we cannot save 2 universes of same name in one folder). So how the above senario happned.
regards
hussain

Similar Messages

An iAS 4.1 Web Connector looked up the wrong IP, is there a way to change it ?

I have one working iWS 4.1 instance running on Solaris 8.
I have decided to install anthoer web server instance + web connector to iAS 6.0 for SSL purposes.
However, after I set up the second instance and when I ran the page, an error 500 is returned and the web log is as follows:
[21/Jan/2002:16:11:51] config ( 586): for host 192.168.128.2 trying to GET /NASApp/test/test.jsp, handle-processed reports: no way to service request for /NASApp/test/test.jsp
192.168.128.2 is our company's internal router.
Any suggestion to make it working ? Or any ideas what went wrong in there ?
I have checked the configured IP in the kregedit of the second instance, (/CCS0/HTTPAPI/GXIP) which is set to 192.168.128.9 (our iAS server).
Any solutions ?
Thanks and regards,
Kasnol

Hi, I think I got confused with the error message, it seemed to me that 192.168.128.2 is the client IP access the Web server, not the IP which Web Connector is trying to access App server.
Any idea how to solve the error message ?
[21/Jan/2002:16:11:51] config ( 586): for host 192.168.128.2 trying to GET /NASApp/test/test.jsp, handle-processed reports: no way to service request for /NASApp/test/test.jsp
Thanks and regards,
Kasnol

Can Business Objects Web Intelligency reports access NearLine Storage data Via BW Bex Query

Hi Gurus,
I am aware BEX queries can access NearLine Storage data for reporting but can Business Objects Web Intelligency reports access NearLine Storage data Via BICS connection ( Bex Query as a Source).
Thanks,
Shak.

I would recommend to let your SAP Basis guys do a security trace on the SAP BW side and see if some authorization check for the user fails when trying to fetch data over the universe.
Regards,
Stratos

How to WorkDay() Excel Function in Business Objects Web Intelligence 12.2.7

Hi,
I am calculating OTD SLA metrics using the Business Object Web Intelligence, but I am stuck with the WorkDay() how to use this in BO, as it is available in Excel. Requirement is that I need to add business days (Saturdays and Sundays should not be considered) to a particular date. Greatly appreciate if some one can help me immediately as this is high priority right now and need to complete it <REMOVED_BY_MODERATOR>. Thank you, Shiv. Thanks in advance.
Edited by: Pravender on Nov 22, 2010 11:18 AM

Thank you for trying to reply.
What exactly I need is that:
Example:
11/19/2010 + 3 this should give me the date 11/24/2010 which is actually excluding Sat and Sun and adding only the business days to the date.
Please provide me full formula
Thanks in advance, Shiv

I have logic pro, soundtrack pro will not open i get an error message what do i do? i cant find the receipts ive checked my library am i looking in the wrong place?

I have logic pro, soundtrack pro will not open i get an error message what do i do? i cant find the receipts ive checked my library am i looking in the wrong place?

I get the same kind of thing..
I'm on osx 10.7.2 and once I click the soundtrack pro icon I get an error message. I had problems with logic pro & my digi002r soundcard midi drivers but now is fixed (using a midi adapter).
here is the code:
Process: Soundtrack Pro [1705]
Path: /Applications/Soundtrack Pro.app/Contents/MacOS/Soundtrack Pro
Identifier: com.apple.soundtrackpro
Version: 3.0.1 (960)
Build Info: SoundtrackProProject-9600000~277
Code Type: X86 (Native)
Parent Process: launchd [140]
Date/Time: 2011-10-18 13:12:05.201 +0200
OS Version: Mac OS X 10.7.2 (11C74)
Report Version: 9
Interval Since Last Report: 195725 sec
Crashes Since Last Report: 3
Per-App Crashes Since Last Report: 2
Anonymous UUID: 23728D81-590B-4C3A-8C67-1709945CD132
Crashed Thread: 0
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
dyld: launch, loading dependent libraries
Dyld Error Message:
Library not loaded: /Library/Application Support/ProApps/*/ProFX.framework/Versions/A/ProFX
Referenced from: /Applications/Soundtrack Pro.app/Contents/MacOS/Soundtrack Pro
Reason: image not found
Binary Images:
 0x1000 - 0x7f7ff8 com.apple.soundtrackpro (3.0.1 - 960) <77CF322B-8BBE-AAEA-173F-75A237035319> /Applications/Soundtrack Pro.app/Contents/MacOS/Soundtrack Pro
0x947000 - 0x94bfe6 +STPInterleave (??? - ???) <E87D1F34-6D97-63DB-454C-CF3D1B03F8E5> /Applications/Soundtrack Pro.app/Contents/Frameworks/STPInterleave.framework/Versions/A/STPInterleave
0x952000 - 0x98ffff com.apple.vmutils (4.2.1 - 107) <43B3BFA5-8362-3EBD-B44B-32DCE9885082> /System/Library/PrivateFrameworks/vmutils.framework/Versions/A/vmutils
0x9a9000 - 0x9f5ffb com.apple.audio.midi.CoreMIDI (1.8 - 42) <CBD34EBC-0FFD-34B4-B55A-BE1F61EF4BD8> /System/Library/Frameworks/CoreMIDI.framework/Versions/A/CoreMIDI
0xa18000 - 0xc3eff7 com.apple.prokit (7.1.1 - 1511) <498819A4-1BDD-3671-8796-E11865BCFBCE> /System/Library/PrivateFrameworks/ProKit.framework/Versions/A/ProKit
0xd49000 - 0xd49fff com.apple.iokit.dvcomponentglue (2.0.7 - 2.0.7) <1CFA5944-AB33-3A41-B4D2-4A624A514C0D> /System/Library/Frameworks/DVComponentGlue.framework/Versions/A/DVComponentGlue
0xd4d000 - 0xd54fff com.apple.AEProfiling (1.2 - 22) <43A46C32-8E13-82DD-8AF1-2A40690BF810> /Applications/Soundtrack Pro.app/Contents/Frameworks/AEProfiling.framework/Versions/A/AEProfiling
0xd5e000 - 0xd6dfff com.apple.AERegistration (1.2 - 77) <5D18C47F-6F9E-0C4C-8875-24A14A97186D> /Applications/Soundtrack Pro.app/Contents/Frameworks/AERegistration.framework/Versions/A/AERegistration
0xd81000 - 0xd83fff com.apple.ExceptionHandling (1.5 - 10) <6CA9446C-7EF9-35EE-BDF2-AA8D51E93E9E> /System/Library/Frameworks/ExceptionHandling.framework/Versions/A/ExceptionHand ling
0xd89000 - 0xe49fff com.apple.omf_framework (1.1.0 - 1.0) <ED5F21BC-18CD-D7F7-3D2E-F7F856BC0D40> /Applications/Soundtrack Pro.app/Contents/Frameworks/OMF.framework/Versions/A/OMF
0x11000000 - 0x1102afeb com.apple.proapps.ControlSurfaceSupport (2.0 - 68) <BD914236-49D8-9C9A-E8D6-CBC1738850B3> /Applications/Soundtrack Pro.app/Contents/Frameworks/ControlSurfaceSupport.framework/Versions/A/ControlS urfaceSupport
0x8fe88000 - 0x8feba9c7 dyld (195.5 - ???) <134323A7-49DC-3A9D-ACFD-32FAD0FD6BA2> /usr/lib/dyld
0x90840000 - 0x90992fff com.apple.audio.toolbox.AudioToolbox (1.7.1 - 1.7.1) <7646E131-08EE-3D72-ADA2-4A61C562B36E> /System/Library/Frameworks/AudioToolbox.framework/Versions/A/AudioToolbox
0x90993000 - 0x90993ff2 com.apple.CoreServices (53 - 53) <7CB7AA95-D5A7-366A-BB8A-035AA9E582F8> /System/Library/Frameworks/CoreServices.framework/Versions/A/CoreServices
0x91e60000 - 0x92036fe3 com.apple.CoreFoundation (6.7.1 - 635.15) <AC9F6462-6315-3D89-8075-D048DB4DBF7E> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
0x924a8000 - 0x92509ffb com.apple.audio.CoreAudio (4.0.1 - 4.0.1) <089D78E0-46A6-38DB-9545-7F35CC815939> /System/Library/Frameworks/CoreAudio.framework/Versions/A/CoreAudio
0x93281000 - 0x9328ffff com.apple.opengl (1.7.5 - 1.7.5) <81166D23-DE8E-3938-AAD3-29B1FA5E446E> /System/Library/Frameworks/OpenGL.framework/Versions/A/OpenGL
0x93331000 - 0x93331fff com.apple.vecLib (3.7 - vecLib 3.7) <8CCF99BF-A4B7-3C01-9219-B83D2AE5F82A> /System/Library/Frameworks/vecLib.framework/Versions/A/vecLib
0x93332000 - 0x93493ffb com.apple.QuartzCore (1.7 - 270.0) <0916DA83-6400-3FEA-BC53-5F4BA4D126EC> /System/Library/Frameworks/QuartzCore.framework/Versions/A/QuartzCore
0x94326000 - 0x9436dfff com.apple.SystemConfiguration (1.11.1 - 1.11) <CA6CE2B6-DC18-31FF-9668-70BB2FD8D7BB> /System/Library/Frameworks/SystemConfiguration.framework/Versions/A/SystemConfi guration
0x94420000 - 0x946a5fe3 com.apple.QuickTime (7.7.1 - 2306) <F8C64DC4-3FE4-3A06-B10B-59E7F3BA6FDD> /System/Library/Frameworks/QuickTime.framework/Versions/A/QuickTime
0x97dd0000 - 0x98082ff7 com.apple.security (7.0 - 55010) <BE0350C5-5221-3BFF-B674-646AB1BA0F2E> /System/Library/Frameworks/Security.framework/Versions/A/Security
0x99d12000 - 0x99d76fff com.apple.framework.IOKit (2.0 - ???) <D14460ED-2B6C-375D-B3A4-B8C82E922666> /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
0x9adc8000 - 0x9adc8fff com.apple.audio.units.AudioUnit (1.7.1 - 1.7.1) <2E71E880-25D1-3210-8D26-21EC47ED810C> /System/Library/Frameworks/AudioUnit.framework/Versions/A/AudioUnit
0x9aef1000 - 0x9aef1fff com.apple.Carbon (153 - 153) <6FF98F0F-2CDE-3888-A304-4ED447D24CE3> /System/Library/Frameworks/Carbon.framework/Versions/A/Carbon
0x9b2ec000 - 0x9b2ecfff com.apple.Cocoa (6.6 - ???) <650273EF-1ABC-334E-B745-B75AF028F9F4> /System/Library/Frameworks/Cocoa.framework/Versions/A/Cocoa
Model: iMac12,1, BootROM IM121.0047.B0A, 4 processors, Intel Core i5, 2.5 GHz, 4 GB, SMC 1.71f21
Graphics: AMD Radeon HD 6750M, AMD Radeon HD 6750M, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1333 MHz, 0x02FE, 0x45424A3231554538424655302D444A2D4620
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1333 MHz, 0x02FE, 0x45424A3231554538424655302D444A2D4620
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x9A), Atheros 9380: 4.0.58.4-P2P
Bluetooth: Version 4.0.1f4, 2 service, 18 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: WDC WD5000AAKS-402AA0, 500,11 GB
Serial ATA Device: HL-DT-STDVDRW GA32N
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 3
USB Device: USB to Serial-ATA bridge, 0x04fc (SUNPLUS TECHNOLOGY CO., LTD.), 0x0c25, 0xfa120000 / 6
USB Device: iLok, 0x088e, 0x5036, 0xfa130000 / 5
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0xfa111000 / 7
USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x850b, 0xfa200000 / 2
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: UM-2G, 0x0582 (Roland Corporation), 0x0106, 0xfd140000 / 5
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 4
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfd110000 / 3
FireWire Device: Digi 002Rack, Digidesign, 400mbit_speed
thanks everyone
e

I am trying to configure my SCXI-1540 card for excitation voltage and frequency using MAX - but it is not giving me that option when I click on the card and then properties, am I looking in the wrong place?

I am trying to configure my SCXI-1540 w/1315 card for excitation voltage and frequency using MAX - but it is not giving me that option when I click on the card and then properties, am I looking in the wrong place?
I have LabVIEW Express 7.0 Professional - SCXI-1000 Chassiss - along with SCXI-1112, and SCXI 1520/1314 - cable to the PCI-6052E is attached to the 1520 card.
MAX says it recognizes all the cards in the chassiss.

Jeremy, Thanks for the reply.
I tried to set up the system as DAQmx.
I had MAX auto-detect the set-up - and it recognized all the cards - but did not select the 1315 accessory on the 1540 card - I had to do that manually - but in the configuration section I would select the accessory and it would deselect itself. I had to get out of the set-up and then right click on the 1540 card and click on the "Accessories" tab and select the 1315 terminal block that way.
It didn't seem right that the system should behave that way, but I pressed onward.
I then tried to create a new DAQmx Task
When I create new DAQmx task and then click on Analog Input no "Position" Tab appears for me to select, all I get are:
Analog>>Voltage
Analog>>Temperature
Ana
log>>Strain
Analog>>Current
Analog>>Resistance
Analog>>Frequency
Analog>>Custom Voltage with Excitation
Do you think there might be something wrong with either my hardware or perhaps my configuration that is not allowing it to recognize the 1540/1315 in DAQmx?
I had included the system report of what programs I am using, etc. as attached file nireport.txt
After the DAQmx did not work I tried installing everything as Traditional DAQ and it did let me set-up the 1540 Card with Excitation Voltage and Frequency and gain - I then went in to the VI that I had built and tried to use the Express DAQ Assisant to read the channel that I am connected to on the 1315/1540 - when I try to use DAQ Assistant it gives me an error saying that "Device not available in NI-DAQmx. It is possible that the device is being use by traditional NI-DAQ"
Which I guess it is since both configurations are now set-up in MAX.
I would PREFER to use the DAQmx set-up, but I am confused as to WHY it won
't come up with
Analog input>>POSITION>>LVDT
When I try to create a new DAQmx task.
Thanks for the help so far! As you can probably tell I am new at this.
Ryan
Attachments:
nireport.txt ‏2 KB

Converting crystal reports 10 to Business Objects XI reports

Hi All I am very new to Business Objects XI R2, I have two doubts if any one knows please give reply to me so that it will be helpful for me.First is :Now I am working for a project called Converting Reports which was created by Crystal Reports 10 TO Business Objects XI reports.Is there any specific way for converting .rpt(Crystal Reports) to .rep (Business Objects) or I have to recreate in Business Objects XI. and Second is: Is it possible, Scheduling BO XI report in java based interface, I heard that it is possible but I don't know how?Please give me, How it is possible? Waiting for replyThanks in Advance 

you will need access to the CMS DB and FRS from CE10 in order to migrate to XI 3.x, typically this is accomplished via network. If you can restore them to the same computer a side by side (install CE10 and XI 3.x on the same server) may work as well.
Regards,
Tim

Pagination +Business Objects Web Services SDK

hello there
please help me,
i use pagination with Business Objects Web Services SDK but i can't limit number of records to aspecific number like
NameValuePair[] objNameValuePair = new NameValuePair[2];
        objNameValuePair[0] = NameValuePair.Factory.newInstance();
        objNameValuePair[0].setName("page.records.horizontal.limit");
        objNameValuePair[0].setValue("15");
        objNameValuePair[1] = NameValuePair.Factory.newInstance();
        objNameValuePair[1].setName("page.records.vertical.limit");
        objNameValuePair[1].setValue("600");
        view.setMediaArray(objNameValuePair);
waiting for your help.
thank you.

i waiting your help?
is the Question more difficult to answer it??

What SAP Business Objects Web Services to use with XI3.0

I'm new to BO and is tasked to install it.
What I've installed already is the BOE XI3.0 version and now want to install Xcelsius 2008 Enterprise.
What I can not figure out from the Xcelsius manual or SDN or OSS is what the Business Objects Web Services are the manual instructs you to install with Xcelsius.
I did find something called
BusinessObjects Web Services XI for Windows and downloaded it but is not sure if this is what I need to install as the business Object Web Services on XI 3.0
Can someone please direct me in the correct direction
Thanks in advance
Liezel

Hi,
i am not sure if i understand your question. If you mean Query as a Webservice (QaaWS), this component should be part of your XI 3.0 Enterprise installation. You could also use the flynet (www.flynet.co.uk) which is part of Xcelsius Enterprise 2008 SP1.
Best Regards
Ulrich
Edited by: Ulrich Hambuch on Sep 29, 2008 1:09 AM

How to deploy business objects web services on tomcat

Hi everyone can anyone tell how i need to deploy business objects web services on tomcat, i installed business objects on unix server.what r the steps i need to follow in order to deploy web services on business objects. this web services must be called by a java program externally, that the reason i am deploying web services.
i downloaded business objects web services portal sample zip file. the wssdkj2eeportal directory is created with ant_scripts,src, dsws.config and wsportalassemblyscripts.bat.
i am trying to configure the dsws.config, by modifying it to
<configuration version="1.0">
 <WebService Name="BusinessObjects Enterprise XI 3.1 sp3" Icon="image/java.gif">
 XI 3.1 Web Services
 <Connection URL="http://169.111.33.61:8080/dswsbobje/services/session" Proxy="0" Timeout="120000" />
 </WebService>
 <Proxy Name="Outside" URL="http://http-cache.mycompany.com:3667" />
</configuration>
what i need to do in order to deploy
i am using bo xi 3.1 sp3

Hi,
You deploy all the web applications provided by BOE with the use of Wdeploy tool installed with BOE installation, for details please reffer the following document
[BusinessObjects Enterprise XI 3.1 Web Application Deployment Guide for UNIX*|http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000715844%26_SCENARIO=01100035870000000202]
Regards,
Ramu.
Edited by: Gowda Timma Ramu on Nov 9, 2010 8:39 PM

BUSINESS OBJECTS- Crystal Reports-based out of Function module

We are right now creating BUSINESS OBJECTS- Crystal Reports. Our client requirement is to create this report based out of u201CFunction moduleu201D.
With the current parameters settings at the Crystal Reports designer we are able to create the report based on View and Linking various table. The reports get executed and fetch data. But when we create a report based out of FM, the report returns nothing. The screen stays in u201CNot responding stageu201D and terminates after without any message/pop-up.
Can anyone please help us resolving this? Are there any parameters/settings to be done which we are missing?
Thanks,
Pallavi

Hi Pallavi,
Not much info to go on. What version of Cr are you using?
What database and version are you using?
How are you connecting to the database, ODBC, OLE DB or native driver?
Have you turned tracing on the server to what SQL is being passed from CR?
Have you copied the SQL from Show SQL in the Designer and paste that into a DB SQL test tool to verify you should be getting data back and that you are not returning so much data it's going to take a week to get?
Not responding simply means CR is waiting for data, try being patient and see if you ever get data or add a Record Selection formula so you only get a few rows of data.
Try reporting off of a single table itself to verify it works and you have permission to run the SQL.
Thank you
Don

IPhoto - My iPhoto is not responding. When I click on iPhoto I get a never ending spinning beachball. I almost think it is looking in the wrong place for the pictures. How do I redirect it back to the Mac hard drive?

My iPhoto is not responding. Whenever I click on the iPhoto icon I get a twirling beachball. It is as if the machine is looking in the wrong place for the photos. How can I see where the machine is looking to find out if this is really the problem. How can I see the path?

Try this: launch iPhoto with the Option key held down and create a new, test library. Import some photos and check to see if the same problem persists. If it doesn't then the problem lies with your current library.
If that's the case Apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start with Option #3, followed by #4 and then #1 as needed.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

Have os x 10.8.5. have downloaded and installed melodyne essential but when i open garage band i cannot see this vst plugin with my other effects. i also have Reaper installed and it shows up as a vst plugin there. am i looking in the wrong place ? ?

have never used this forum before (obviously) and thought the "ask a question" space was all i had. m;y app.
2 more questions : is melodyne essential compatible with garrage band.
would having Reaper installed interfere with the plugin being installed in GB ?
any help app
rogerdc

answered my own question - i was looking in the wrong place

Sample for Business Objects Web Services for Admin Tasks

Hi,
Anyone has any idea that where can I get a sample using Business Objects Web Services for Admin Tasks like:
- How To Set Security Rights
- How To Manage Categories
- How To Manage User Accounts
- How To Manage User Groups
Thanks,
Harshad

Samples are available at:
https://www.sdn.sap.com/irj/sdn/businessobjects?rid=/webcontent/uuid/e02e0a54-6471-2b10-c99c-d66e07fab102&startindex=21
Check BOSAP notes and other samples page for more info.

Report output looking at the wrong server.

Basically,
I have split a customers application and data in two as the company is splitting in two.
I have cloned the complete system (VMWare).
However, one of the systems works fine (as it is unchanged) but the other still looks at the first one for some report data and I can't find the reference that I haven't changed.
The original server is web-alpha and the new server is web-beta.
When creating a PDF report from a client machine pointed at web-alpha with the url:
http://web-alpha/dev60cgi/rwcgi60.exe?paramform=html&server=Rep60_web-alpha&report=TREP005.REP&userid=me/me@alpha&destype=cache&desformat=PDF
I then accept the defaults of my report.
The pdf file then appears correctly in the web browser and displays under the url:
http://web-alpha/dev60cgi/rwcgi60.exe?
When creating a PDF report from a client machine pointed at web-beta with the url:
http://web-beta/dev60cgi/rwcgi60.exe?paramform=html&server=Rep60_web-beta&report=TREP005.REP&userid=me/me@beta&destype=cache&desformat=PDF
I then accept the defaults of my report.
The pdf file then appears in the web browser displaying the data from the wrong server and displays under the url:
http://web-alpha/dev60cgi/rwcgi60.exe?
Can anyone tell me where it gets the browser reference from?
In the second example, I know that it needs to point to the correct server, but I cannot find the reference, I have even done a full text search of the server for web-alpha, but it is not referenced anywhere.

I have found that the actual problem is when I have paramform=yes or html in the url.
in the html source of the paramform that is displayed, I can see it includes the old server name.
Does anyone know where the paramform is generated from, or is it just a template?
If the report does not require any parameters and I have paramform=no in the url, then it works correctly.

Business Objects Webi Report looks at the wrong universe

Similar Messages

Maybe you are looking for