Business Objects XI 3.1 3 tier login failure

I recieve the following error message when I try using 3 tier mode to login to Desktop Intelligence. The 2 tier mode is workign fine. I have IIS as a webapp server. I can login to infoview and cmc as well.
Error Message: [repo_proxy 13] HttpSessionFacade::openSession - unable to proceed to the handshake : HTTP communication problem
System: Business Objects XI 3.1 deployed on VMware.Windows Server 2003 SP2

Hi,
Try to login to CMC, and then under the servers section, under properties,
set the Hostname or the IP Address, and then restart the server and try again.
-Shreyash.

Similar Messages

Unable to login to cmc after installing business objects xi 3.0

Hi Friends,
I'm new to Business Objects, i've installed bussiness objects XI 3.0 and i did not specify the user name and password during installation (since there was a checkbox option to configure it later after installation). Now i've troble logging in. I tried to login using Administrator as username and no password, its neither logging in nor giving me an error message but asking me to provide login details, whereas i could login with the same administrator as username into Business View Manager and Diagnostic Tools. Please help.
thanks.

Change your URL to the IP address of the server or FQDN.
Also try to disable windows enhanced security if using 2003.
Most common causes of this are DNS issues or session problems with the browser (bothh may be resolved with the steps above).
Regards,
Tim

Display the login User ID on Header in Business Objects XI R3.1 Infoview

In XI R2 Infoview- the login user ID is displayed on header. However In XI R3.1 infoview- displayed Business Objects Logo on the same place of the Header. We noticed that In BO XI3.1 infoview the login user ID is displayed on header. However the Business Objects logo is displayed on top of the user ID so the user ID is hidden. while Setting the Infoview Application properties in CMC (CMC>Applications>Infoview Application Properties> check Do not display logo) then it will hide the logo and then next login displays the login user ID. Could someone please confirm is it the solution with this configuration or else please help us how to display the user ID on Infoview Header.

Hey,
What you did is exactly correct.
Now you did on XI-R2 and 3.1 right??, whenever you got upgrade to next release of BO version again you have to do the same changing of properties. Which should not be dynamic based on your previous changes on earlier versions.
Thank You!!

Business Objects XIR2 Infoview login issue

Hello -
I have a typical issue with BO Infoview login screen where the system name is showing incorrectly. The value should be coming from the configuration from web.xml file but it shows a totally different name with no option to update it. I checked the windows registry and system valiarbles but I haven't found anywhere on the system. Any ideas where this value is coming from ? Thanks.

Thanks Denis. I see that the login issue has been resolved, but I noticed a different error when I login and logout from CMC. Here's the error message... not sure if this is connected to the previous one.
D:\Program Files\Business Objects\Tomcat\work\Catalina\localhost\jsfadmin\org\apache\jsp\adminPages\Common\PreLogoff_jsp.java:78: as of release 1.5, 'enum' is a keyword, and may not be used as an identifier
(try -source 1.4 or lower to use 'enum' as an identifier)
while (enum.hasMoreElements()) {
^
An error occurred at line: 17 in the jsp file: /adminPages/Common/PreLogoff.jsp
Generated servlet error:

Can not login to BOE Server (Business Object 4.0) by WebIntelligence

I have ready a BOE Server (Business Object 4.0) , now I want to login BOE Server by BOE Client Tool - WebIntelligence, but I can not login,
The error display : Logon failure due to an internal error
Please help and share information to me
Thanks

Please provide more details on the exact workflow and the exact architecture of your deployment.

Business Objects Enterprise 11.5 FTP Transfer Problem

Hello,
Hopefully someone out there will be familiar with the issue I'm having and be able to provide a solution.
We are running Business Objects Enterprise 11.5 on our Windows 2003 server. I've created and scheduled a job on the server that creates an XLS file containing loan portfolio data that is to be transmitted to a third party client on a monthly basis.
The problem centers around the method of transfer, which is via FTP to a secure site hosted by the client. When executed through Crystal, the FTP actually does achieve a successful login using the credentials the client provided (we have verified this repeatedly by looking at the logs), but the client's server "kicks out" when we attempt any operation on it.
A similar result was produced when we attempted to FTP to the site via the Windows command line. The login was successful, but even a simple command to view the directory "dir" resulted in the connection being rejected. To make a long story short, after reviewing the issue extensively with the client's technical department, our conclusion was that the problem was the result of the FTP sending in "active" mode instead of "passive". We confirmed this by installing a freeware FileZilla on the same server, and switching between active and passive modes (active failed, passive did not).
Their tech people recommended that we contact SAP to get answers to two questions, which I'm hoping someone out there may know:
1) How does Business Objects Enterprise 11.5 execute the FTP process? Is it using its own native logic or simply invoking the command line?
2) Is there any setting with the console that would enable us to modify the FTP settings to send force it to send in passive mode?
Thanks.

Hi,
This is a known limitation. BO only supports active mode for FTP. Refer 1782115 - Which FTP mode is supported as a schedule or publication destination for reference.
If you are able to write a batch file or a program object to transfer a file from a file location to Client FTP, you can try the below workaround.
1. Add the script\batch file as a program object in BO. In the script make sure you include the code to delete the instance after it is successfully transmitted through FTP.
2. Create a File event pointing to the location along with the name of the instance.
3. Schedule the report to the file location with the specific instance name.
4. Schedule the program object based on the file event you created in step 2.
Hope this helps.
Regards
Chinmaya

Running XI and 6.5 Services on same Business Objects Server

We are currently thinking about migrating to Business Objects XI from 6.5 SP4.
We are running with a 3-tier architecture, with the Business Objects services running on a Windows Server.
Due to the number of users and reports in circulation we would like to do the migration in phases.
Is it possible to run both the XI and 6.5 services on the same Business Objects server at the same time?

That's actually a migration secanario so it should work fine. I had no trouble with 5.2 and 6.0 on the same system.
Tom

Authorisation in Business Objects Explorer Infospaces created on BEx query

Hello,
We have installed Business Objects Explorer, created Universe on BEx query and created a Explorer Infospace on that universe. everything works fine but the authorisations created for the user in BEx query are not taken into consideration when I login using SAP username "leveraging" SSO.
Is Explorer not designed to consider authorisations in BEX query?
Whats happening during Indexing of an Infospace? Will the system save the data in Business Objects repository from the source of the data?
Thanks in advance.
/Suman

Hi Suman,
You are right , Explorer is not designed to leverage Authorisations in SAP BW.
Polestar is indexing data and keeping it out side of BW. Although you can log in with SSO , it doesn't check the authorization according to BW, it shows everything indexed.
You can have a workaround if the case is simple such as;
Suppose you have 3 region , you can create 3 infospaces and give these authorizations to users from CMC.
But if you really want to use all features of authorization in BW , it is impossible for now.
Regards,
Ozan Eroglu

Business Objects - Lifecyle Management Services

Is there anyone who knows about BOE LCM? We are planning to install a 3-tier (Dev/QA/Prod) Business Objects environments. Our desire is to develop in Dev, move to QA for testing and Prod. We would prefer not to have end users develop Xcelsius dashboards in production. Just looking for anyone with experience or additional SAP documentation I can not find.
Thanks,
John

Hi John,
SAP BusinessObjects has develpoed its own integrated version control solution product named "LifeCycleManager (LCM)"
Please find the relavant documents below -
- [Release Notes|http://help.sap.com/businessobject/product_guides/boexir31/en/xi31_LCM_ReleaseNotes_en.pdf]
- [User Guide|http://help.sap.com/businessobject/product_guides/boexir31/en/xi31_LCM_User_en.pdf]
- [Install Guide|http://help.sap.com/businessobject/product_guides/boexir31/en/xi31_LCM_Install_en.pdf]
Hope this helps.
Cheers,
Subhodeep

Bug with Business Objects 3.1 Client installation. Very annoying indeed.

I have faced a few issues while developing with the Client installation (which includes the Client Development SDK) of business objects 3.1.
Some of the code just don't work with the client installation. They give Invalid cast exceptions. The same code will work fine with the server installation.
For a simple example, consider the following straightforward code to set the destination-
String query = "Select SI_DEST_SCHEDULEOPTIONS, SI_PROGID "
          + " From CI_SYSTEMOBJECTS Where SI_PARENTID=29 and "
          + " SI_NAME='CrystalEnterprise.DiskUnmanaged'";
        InfoObjects destinationInfoObjects = infostore.Query(query);
        InfoObject infoObject = destinationInfoObjects[1];
        //Set the options for the disk unmanaged destination
        DestinationPlugin destinationPlugin = (DestinationPlugin)infoObject;
        DiskUnmanaged diskUnmanaged = (DiskUnmanaged)destinationPlugin;
        DestinationOptions destinationOptions = diskUnmanaged.ScheduleOptions;
        DiskUnmanagedOptions diskUnmanagedOptions = new DiskUnmanagedOptions(destinationOptions);
        diskUnmanagedOptions.DestinationFiles.Add("C:\\");
        diskUnmanagedOptions.UserName = "your_username"; //Change these according to your logon settings.
        diskUnmanagedOptions.Password = "your_password";
        schedulingInfo = publication.SchedulingInfo;
        schedulingInfo.Destination.SetFromPlugin(diskUnmanaged);
This code will give an invalid cast exception as follows-
System.InvalidCastException: Unable to cast object of type 'CrystalDecisions.Enterprise.InfoObject' to type 'CrystalDecisions.Enterprise.DestinationPlugin'.
This happens at the line -
DestinationPlugin destinationPlugin = (DestinationPlugin)infoObject;
Now, this code works fine on a box where the server is installed.
I have noticed this with a few other areas as well where the code fails with client installation but works on the server. This is really annoying because all the deveopers now have to install the server on their boxes.
It is actually worse if just the Client Developer SDK is installed (and not the whole client). You would expect that just the SDK installation would be enough for one to do the coding. But doesn't work at all.
Have others not faced this issue?

Hi Dan,
Thanks for your response. However, what I meant by client installation is exactly as what you have said below.
I start the BusinessObjects Enterprise XI 3.1 Setup, go to custom install, which shows up the following options-
Client Components
Web Tier Components
Server Components
Database Access
etc. etc.
Initially I unselected all, drilled down Client Components and just installed the Developer Components. But the code used to fail with an InvalidCast exception when we used to cast an InfoObject to a Report as following-
Report report = (Report)infoObjects[1];
This code used to work fine with earlier installations of business objects.
This happened with all 3 of us who installed just the Dev components. To get over this we installed the whole Client Components and the above problem got resolved.
And now we realize that even the whole Client Comp is not enough because it gives the casting problem while doing the destination stuff.

Installing Business Objects XI R2 on the same server (LPAR) multiple times

Greetings!
My goal is to create "multiple" Business Objects XI R2 instances on a single AIX LPAR, so that I might have up to 8 Business Objects environments. Each environment would be be used to promote reports through test and eventually production. Yes, I know 8 environments is a lot, they won't necessarily be running simultaneiously. We do want 8 environments, with 8 CMS databases all separated.
I belive there are two possibilities:
1. I can create 8 separate Business Objects installs, each in their own separate directory structure, each install owned by a different user. Each installation would use a separate set of ports statically bound to each service that needs to be accessed over a firewall (like CMS, inputFRS, outputFRS,...).
2. Run a single installation of Business Objects and keep sepaarate CMS databases and repositories. I doubt this would work as I've only been able to find configurations for clustering, in which all CMS servers use the SAME CMS database. Is this option even possible?
Does anybody have any similar experiences using AIX? I have already attempted getting a second install running (option #1) but so far I've not been able to keep the second environement's CMS server running using statically-bound ports. They will, however, run simultaneously on the second install without statically binding the ports.
Server details:
IBM AIX 5.3 TL-08
Business Objects XI R2 SP4
CMS database - IBM DB2 9.1.4
Reporting database - IBM InfoSphere 9.5
Server separated by clients via firewall
Users will access Infoview, some access w/Crystal Reports XI
Thanks for your consideration,
Sean Boone

Thanks for the replies everyone!
I've gotten the two environments running but the CMC from one environment is trying to control the CMC from the other. For example, I have added the two installations to a single machine and set them up as follows:
boadmin - userid of "first" environment
boadminf - userid of "second" environment
CMS #1: boenv:6400
Tomcat ports: 8080, 8443, 8005 (std)
CMS #2: boenv:5500
Tomcat ports: 5905, 1720, 1731
So when I login to the CMC on CMS #1 and check "Settings" I see the database alias that I expect. When I logout and then login to the second CMS I see the same CMS database alias. In other words, they are both using the same database. However when I run the "cmsdbsetup.sh" command, it shows the correct alias for each environment.
My only thought at this point might be that since the daemons were given default names I'm going to see the same "service names" even though they are controlled via a separate name server.
Any clues as to what might be the cause here?
Thanks again!
Sean Boone

Business Objects Customization Using Class file without net bean

Hi,
Any one please help me out.
my requirement is like I want to use Business Objects SDK
<%@ page import="com.crystaldecisions.sdk.framework.CrystalEnterprise" %>
above is example..
in Class file of Java without using netbean.
I try to do this with creating Batch file add all Jar file and set path and but its not working.
Also can I Login Into business Objects through class file not using netbean(means from command prompt)
and create user group into CMS.

Please find following servlet code who dont understand my requirement.
* GroupCreation.java
* Created on September 2, 2008, 3:47 PM
import java.io.*;
import java.net.*;
import javax.servlet.*;
import javax.servlet.http.*;
import com.crystaldecisions.enterprise.ocaframework.ServiceNames;
import com.crystaldecisions.sdk.exception.SDKException;
import com.crystaldecisions.sdk.framework.CrystalEnterprise;
import com.crystaldecisions.sdk.framework.IEnterpriseSession;
import com.crystaldecisions.sdk.framework.ISessionMgr;
import com.crystaldecisions.sdk.occa.infostore.IInfoStore;
import com.crystaldecisions.sdk.occa.managedreports.*;
import com.crystaldecisions.sdk.occa.security.ILogonTokenMgr;
import javax.servlet.http.Cookie;
import com.crystaldecisions.sdk.occa.infostore.*;
import com.crystaldecisions.sdk.occa.pluginmgr.*;
import com.crystaldecisions.sdk.plugin.CeProgID;
import com.crystaldecisions.sdk.plugin.desktop.user.*;
import com.crystaldecisions.sdk.properties.*;
import javax.servlet.http.HttpSession;
* @author prashant.joshi
* @version
public class GroupCreation extends HttpServlet
protected void doPost(HttpServletRequest request, HttpServletResponse response)
throws ServletException, IOException
HttpSession session = request.getSession(true);
response.setContentType("text/html;charset=UTF-8");
PrintWriter out = response.getWriter();
String cms = request.getParameter("CMS");
String username = request.getParameter("UserID");
String password = request.getParameter("Password");
String auth = request.getParameter("Aut");
IEnterpriseSession enterpriseSession = null;
try
ISessionMgr sessionMgr = CrystalEnterprise.getSessionMgr();
catch(SDKException e)
out.println(e.getMessage());
Exception failure = null;
boolean loggedIn = true;
// If no session already exists, logon using the specified parameters.
if (enterpriseSession == null)
try
// Attempt logon. Create an Enterprise session
// manager object.
ISessionMgr sm = CrystalEnterprise.getSessionMgr();
// Log on to BusinessObjects Enterprise
enterpriseSession = sm.logon(username, password, cms, auth);
catch (Exception error)
loggedIn = false;
failure = error;
if (!loggedIn)
// If the login failed, redirect the user to the start page.
out.println("<SCRIPT language=\"javascript\"> " +
" alert (\"Sorry - you could not be logged on to this server." +
" Ensure that your user name and password, as well as the CMS name are correct." +
"\"); </SCRIPT>");
out.println("<META HTTP-EQUIV='refresh' CONTENT='0;URL=LogonPage.jsp'>");
return;
else
try
// Store the IEnterpriseSession object in the session.
session.setAttribute("EnterpriseSession", enterpriseSession);
// Create the IInfoStore object.
IInfoStore iStore = (IInfoStore) enterpriseSession.getService("InfoStore",
ServiceNames.OCA_I_IINFO_STORE);
// Store the IInfoStore object in the session using the
// helper functions.
session.setAttribute("InfoStore", iStore);
// Create the IReportSourceFactory object.
IReportSourceFactory reportSourceFactory = (IReportSourceFactory) enterpriseSession.getService("PSReportFactory");
// Store the IReportSourceFactory object in the session
// using the helper functions.
session.setAttribute("ReportSourceFactory", reportSourceFactory);
// Retrieve the logon token manager.
ILogonTokenMgr logonTokenMgr = enterpriseSession.getLogonTokenMgr();
// Retrieve a logon token and store it in the user's cookie
// file for use later.
Cookie cookie = new Cookie("LogonToken", logonTokenMgr.createLogonToken("", 60, 100));
response.addCookie(cookie);
// LOCUse the plugin manager and the UserGroup plugin to create a new
// UserGroup object._ENDLOC_
// LOCIf the infoStore object is not found then display an error message._ENDLOC_
IInfoStore infoStore = (IInfoStore) session.getAttribute("InfoStore");
// LOCIf the infoStore object is not found then display an error message._ENDLOC_
if (infoStore == null)
throw new Error("_LOC_InfoStore object not found. Please logon again._ENDLOC_");
IPluginMgr pluginMgr = infoStore.getPluginMgr();
//IPluginMgr pluginMgr2 = infoStore.getPluginMgr();
IPluginInfo userGroupPlugin = pluginMgr.getPluginInfo("CrystalEnterprise.UserGroup");
// IPluginInfo userGroupPlugin2 = pluginMgr.getPluginInfo("CrystalEnterprise.UserGroup");
// LOCCreate a new InfoObjects collection._ENDLOC_
IInfoObjects newInfoObjects1 = infoStore.newInfoObjectCollection();
IInfoObjects newInfoObjects2 = infoStore.newInfoObjectCollection();
// LOCAdd the UserGroup interface to the new InfoObjects collection._ENDLOC_
newInfoObjects1.add(userGroupPlugin);
newInfoObjects2.add(userGroupPlugin);
// LOCGet the new UserGroup object from the collection._ENDLOC_
IInfoObject iObject1 = (IInfoObject) newInfoObjects1.get(0);
IInfoObject iObject2 = (IInfoObject) newInfoObjects2.get(0);
// LOCOnce you have the new UserGroup object, set its properties._ENDLOC_
iObject1.setTitle ("Single Home Group");
iObject1.setDescription ("It is Single Home Group");
iObject2.setTitle ("Multi home Group");
iObject2.setDescription ("It is multi Home Group");
// LOCRetrieve the ID of the InfoObject (user group)._ENDLOC_
// objectID = iObject.getID();
// LOCSave the new group to the CMS._ENDLOC_
infoStore.commit (newInfoObjects1);
infoStore.commit (newInfoObjects2);
catch(Exception ex)
// If the User group is already created.
out.println("<SCRIPT language=\"javascript\"> " +
" alert (\"Sorry - The User Group is already created Please enter another User Group." +
"\");</SCRIPT>");
out.println("<META HTTP-EQUIV='refresh' CONTENT='0;URL=LogonPage.jsp'>");
return;
// If the User is Logged on the Business objects
out.println("<SCRIPT language=\"javascript\"> " +
" alert (\"UserGroup get created in CMS.\"); </SCRIPT>");
out.println("<META HTTP-EQUIV='refresh' CONTENT='0;URL=LogOff.jsp'>");
out.close();
/** Returns a short description of the servlet.
public String getServletInfo() {
return "Short description";
// </editor-fold>
when I paste above code in simple notepad as class file and run this file from command prompt
it gives error like following 1 example I getting 46 errors for different Business Objects classes
symbol : variable CrystalEnterprise
location: class GroupCreation
ISessionMgr sm = CrystalEnterprise.getSessionMgr();
Please help me Out.
Thank you.

Business Objects XI 4.0 Semantic Layer Questions

Can someone tell me if the new Business Objects XI 4.0 Semantic Layer is an alternative to the use of Universes?
I.E. There will be no need for Crystal Reports 2011 Enterprise, and Xcelcius to use Universes at all to access SAP ERP data as well as SAP BI/BW data?
Is the new direction of SAP not to use Universes to access ERP and BI/BW data at all?
We are a new SAP NETWEAVER ERP installation with BI/BW and are debating on using
1)Business Objects 3.2 with Universes
2)Crystal Reports with custom SQL, Rapidmarts and Data Integrator
3)Business Objects XI 4.0 with this new Semantic Layer and BI Consumer Services.
Any suggestions, pros and cons would be greatly appreaciated.
We are looking to align ourselves with future SAP Business Objects architectures.
Thanks in Advance,
Randy
Edited by: Randy on Feb 11, 2011 7:58 PM

Hi Randy,
Universe is an important part of the Semantic Layer, whether it is version 3.x or version 4.x of SAP BusinessObjects. In version 4.0 (officially known as BI 4.0), you will be using the new Information Design Tool to build universe. It is highly recommended for all of your presentation tools (i.e. WebI, Crystal, Xcelsius/Dashboard, etc) to go through the new Information Design Tool for data (including BW data).
The BI 4.0 Virtual Launch is scheduled on Feb 23. I suggest you to sign up at http://virtualevents.sap.com/business-analytics/login.aspx.
By the way, the SAP BusinessObjects does not have a version 3.2. The most current one is version 3.1. You might be confused with the FixPack which is now up to 3.4.
Hope this helps.

Crystal Report XI R2 save as to Business Objects Enterprice XI R2

Hi All,
I am trying to save a Crysttal Report XI R2 from crystal reports to Business Objects Enterprice XI R2 but I am getting a unable to launch to ReportAdd program.
I checked and the program ReportAdd.exe.
I am not sure why I can not upload this to the Enterprise server.
Help!!
Rick
Exact Message
There was an error while retrieving data from the server: Failed to read data from report file /var/tmp/IHWeeklyResultsSummaryDepartment.rpt. Reason: Failed to open print engine for /hisrep/local/bobje/bobjewca/bobje/enterprise115/solaris_sparc/wcs/reportadd/tmpreport/~ci1e51566f3c36470.rpt. Ensure that CRPE32 is installed on this computer.
Edited by: Rick Phillips on Oct 6, 2008 10:56 PM

Report designed in CR XI R2 (v11.5.8.826). Being saved to a
BO Enterprise XI R2 (v11.5.3.4175) server.
Tried saving the report to the BO repository, takes a long time and then pops up with the error:
Failed to read data from report file <report location> Reason: Unable to launch <Crystal Report location where reportadd.exe is> program to add report to the system.
I login to the server and try to upload the report using the "Publishing Wizard". I get the same error, this time referencing the location of reportadd.exe in Business Objects.
A look at the BO log shows me:
Timestamp     ProcessID     ThreadID     Message
[Thu Oct 16 17:47:58 2008]     5956     6036     assert failure: (.\fromreport.cpp:257). (false : PipeListener: timed out reading from pipe: No error).
[Thu Oct 16 17:47:58 2008]     5956     6036     assert failure: (.\fromreport.cpp:275). (false : user: Administrator, cmd: "<path>ReportAdd" -report
cgyfs03\home1\users\chauian1\Desktop\CapExReport-final.rpt -token z00@1gH_Nm^@`bF?E;nI01BgK=Z;G8Z:H:b<g3`NT=`7A]fJ[kkZLdj4kcGUe`AMZbQ;f1i9TeP7ei`I5MgXHP`4[:?50 -loggingPath "<path>Logging" -discard -newrpt -version 1150 -thumbnail 1 -readpipe 4BC -writepipe 350).
[Thu Oct 16 17:47:58 2008]     5956     6036     assert failure: (.\fromreport.cpp:280). (false : Killing ReportAdd process).
[Thu Oct 16 17:47:58 2008]     5956     6036     assert failure: (.\fromreport.cpp:283). (false : ReportAdd process died).
[Thu Oct 16 17:47:58 2008]     5956     6036     assert failure: (.\fromreport.cpp:557). (false : Unable to launch "<path>ReportAdd program to add report to the system.).
That being said, sometimes it does work. The behavior of both the publishing wizard and CR when saving or trying to upload the report is an hour glass for about 4-5 minutes. If you click away from the application and then click on it again, it states "Not responding" but it is still working. In some cases when I try again to save the report, it goes through in 1-2 minutes. Sometimes if I click away and come back, click on the active app again so it states "Not responding" it will complete saving.
No resolution as of yet, simply keep on trying. This only happens on this particular report which uses a good amount of tables and custom commands all querying a Sybase database. I have other reports with the same functionality that do not run into this problem.

Upgrading from Crystal Enterprise 10 to Business Objects Enterprise 11

Here's the situation:
We decided to upgrade from Crystal Enterprise 10 on server A to Business Objects Enterprise 11 on server B. We went with the method of importing all the objects and users from Crystal Enterprise 10 to Business Objects Enterprise 11. The import also brought in all the DB connection settings that were set in Crystal Enterprise 10. I also brought over all the ODBC System DSNs so that those can be consisten with the old server.
The problem we are having is that the reports are failing due to the connections to the database. I thought importing the database connection settings from Crystal Enterprise 10 along with bringing over the ODBC System DSNs would not make this an issue but it hasn't.
I checked the server logs in SQL and it's telling me that it's trying to log into the server as NT AUTHORITY\ANONYMOUS LOGON. Shouldn't it try to log under whatever I define in the report's database settings or ODBC System DSNs?
These same reports work fine in Crystal Reports and Crystal Enterprise 10.
Edited by: Gingerbread Man on Feb 9, 2010 10:41 AM

go into the properties of the report and verify that the Database Login values are still set. I found that it doesn't always transfer those when doing the import.

Business Objects XI 3.1 3 tier login failure

Similar Messages

Maybe you are looking for