Business Objext 5.1.2 & 5.1.6

Hi Team,
I have a question on Business Objects 5.1.2 & 5.1.6 version.
-> Do this version would support Windows 7 32 bit.
Please let us know if there is any compatability issues if any.
Regards,
Rakesh

Hi,
The latest Enterprise product version supports Windows 7 - BusinessObjects Enterprise XI 3.1 SP3. For full details and other supported technologies, please check the Supported Platform document in our Service Market Place (http://service.sap.com/support)
Hope this helps.

Similar Messages

Problems Upgrading from BO XI to BO XI 3.0

I attempted an upgrade from Business Objext XI (Crystal Enterprise Server) to XI 3.0. The install went fine until it got to the registering modules, which took hours and hours. It errored out that the CMS service was not running and could not continue. I looked at all the services and they are all disabled. The onlything running is the upgraded Tomcat Server.
Looking in the Central Configuration Manager for XI 3.0 Tomcat is the only thing listed. No other services....where do I go from here?
I reran the install and chose Repair, it ran through like it ran and got to Finish, but still nothing.
Help, what do I do?
Thanks,
Mark W.

That's XIR1, there is no upgrade option.
The SIA in XI 3.0 replaced the other services and now runs everything as child propcesses so in the CCM you only see the SIA (Server Intelligence Agent)
If it's missing you should be able to add it, and it should create the other processes for you when you do.
There's questions as to whether or not 3.0 and XIR1 can be installed side by side, is that what you have done? or is it on another server?
Since you are XIR1 you should install 3.0 on a clean server and then migrate via import wizard (in the program files BO group). If you get stuck then open an incident with support.
Regards,
Tim

Use one account or multiple for 10 domain users of Office 2013 Home & Business

I have 10 seats of the retail version of Office Home & Business 2013 for use in a domain environment. Windows 7 Pro 64, Server 2008R2 environment. No exchange. Blank slate.
Should I install all with the same account for ease of management, or setup a new MS Live account for each user? Can I do either, and what are the advantages to each?
Thank you.

Hi,
Both are ok, but neither is really good.
In your scenario, I suggest you use Office 365 to manage all these, which is more recommended:
http://office.microsoft.com/en-001/business/compare-office-365-for-business-plans-FX102918419.aspx
http://office.microsoft.com/en-001/business/compare-all-office-365-for-business-plans-FX104051403.aspx
Regards,
Melon Chen
TechNet Community Support

How to Install Coldfusion 8 64-bit on Small Business Server 2008 64-bit

How to Install Coldfusion 8 64-bit on Small Business Server 2008 64-bit
I ran Coldfusion 8 on SBS 2003 Premium for 6 months with no problems. When we finally decided to cut over to SBS 2008, that’s when everything went to hell. I tried for weeks to get Coldfusion 8 to install properly on the new SBS 2008 64-bit box. During the course which, I found bits and pieces of information for Vista 64-bit and Windows Server 2008 64-bit installations. There are some distinct differences, however, with SBS 2008 since it runs core Web applications like OWA, RWW and Companyweb. After countless unsuccessful attempts, one of which completed corrupted the box, I found the solution.
I have attempted in this white paper to detail the steps to assist others who may be in a similar situation. I don’t make any warranty for the information, but so long as you follow the steps carefully you should be fine. BTW, for those of you who say Adobe offers free technical support for licensed users, that’s not entirely true. Like I said, I purchased CF8 and originally installed it on an SBS 2003 Premium box. After we cut over to SBS 2008 and encountered problems, Adobe wouldn’t provide any technical support without charging. Moreover, based on my initial conversations with Adobe’s technical team, no one seemed to know much about running 64-bit on SBS.
From my understanding, only two versions of Coldfusion 8 can be installed in 64-bit: Enterprise and Developer. The “normal” install (which I paid a grand for) can only be deployed in 32-bit mode – gee, THANKS Adobe! By the way, in Developer mode only two distinct IPs can access the site in addition to the localhost. Any additional IPs will result in a CFML error message stating that the maximum number of IPs have been exceeded. At any rate, take your time and follow the steps to achieve a successful installation.
PRE-INSTALLATION TASKS
Back Up SBS
It’s always a good practice to backup your server before deploying any kind of major system changes. Although this step is optional, I recommend it in case you need to restore your server for any reason. Bear in mind, if your system ever gets totally corrupted, you cannot restore back from the twice daily incremental backup images alone. You will need a full backup with system recovery information to restore. Here are the basic steps:
Click: Start > Programs > Administrative Tools. Right-click “Windows Server Backup” and choose “Run as administrator”.
Click “Backup Once” under Actions in the right-hand pane.
Choose the “Different Options” radio button under Backup Options.
Choose the “Custom” radio button. What we’re primarily interested in here is backing up the OS – not your data partitions or attached drives.
Select the “SYSTEM (C)” checkbox, uncheck any others. Also, ensure that the “Enable system recovery” checkbox is selected before continuing on.
Under ‘Specify Destination Type’, I usually select the “Local drives” radio button and point it to a Terrabyte USB drive I use for backups. You can point this to a tape drive, or select the “Remote shared folder” radio button if you map to a UNC path to store your backup images. Just remember, make sure that whatever path you select can readily be accessed in the event of an emergency. Also, make sure the “Verify after writing (recommended)” checkbox is selected.
Under ‘Specified Advanced Option’, I usually select the “VSS full backup” radio button instead of the default since I don’t use a 3rd party backup product. If like me you rely solely on SBS for your backups, choose the full backup option.
Confirm everything and click “Backup”. This process may take several hours depending on the size of your system.
Verify ISAPI Filters:
In IIS Manager, double-click the server instance in the left-hand pane.
In the center pane under IIS, double click the “Modules” icon to verify that the ISAPI native modules are already installed for IIS. If it’s set up correctly you should see two entries:
IsapiFilterModule %windir%\System32\inetsrv\filter.dll
IsapiModule %windir%\System32\inetsrv\isapi.dll
If either of these modules are missing, you will need to re-install these (google for a solution).
Set Up Development Environment
Create a directory for your CFML files outside of the default Windows location (e.g., default is usually C:\inetpub\wwwroot\). For the purpose of our install, I created a directory on a separate disk called: D:\DEV.
Copy and paste your CFML files and directories into the new DEV root Web directory. This will eventually be the directory where the Coldfusion installer places the CFIDE and CFDOCS folders.
Open IIS Manager and double-click the server instance in the left hand pane. Expand the “Sites” folder. Right-click the Sites folder and select “Add Web Site”.
Enter a name in the “Site Name” box (e.g., “test-site”). You will notice that the system will automatically create a corresponding Application Pool with the same name. NOTE: this is important to prevent conflicts between the DefaultAppPool (needed for SBS Web apps like OWA, RWW, etc.) and the application pool needed for Coldfusion to function properly in SBS 2008.
Point the “Physical Path” to the directory you created in step #1 above (e.g., “D:\DEV”).
Don’t worry about testing the connection. If you click “Test Settings” you may receive a warning that IIS cannot verify access to path (D:\DEV). Don’t worry about this for the time being.
Under “Host name”, enter a DNS path to your site (e.g., “dev.test-site.com”). Click “OK”.
Configure Application Pools for Installation
In IIS Manager, double-click the server instance in the left-hand pane. Click on “Application Pools” to display the list of server application pools in the center pane.
In the “Actions” pane on the right-hand side, click “Set Application Pool Defaults”.
Change “Enable 32-Bit Applications” - the second item from the top – from “False” to “True”, and then click “OK”. NOTE: if you skip this step, Coldfusion will not properly create the required mappings during the install. We will change this setting back after the installation completes – more on this later.
Modify the application.host.config File for 64-Bitness
Click: Start > Programs > Accessories. Right-click “Notepad” and choose “Run as administrator”.
Open the config file from within Notepad – default location: C:\Windows\System32\inetsrv\config\applicationHost.config
Do a search and change this one line from:
<add name="PasswordExpiryModule" image="C:\Windows\system32\RpcProxy\RpcProxy.dll" />
To this:
<add name="PasswordExpiryModule" image="C:\Windows\system32\RpcProxy\RpcProxy.dll" preCondition="bitness64" />
Restart the IIS Admin service.
Set HTTP Compression
According to some threads I read, the http compression module can cause errors if you don’t disable it globally. To remedy this, perform the following:
Click: Start > Programs > Accessories. Right-click “Command Prompt” and choose “Run as administrator”.
At the command prompt, change directory to intetsrv by typing: cd inetsrv
Run the following command:
C:\Windows\system32\inetsrv>appcmd.exe set config -section:system.webServer/httpCompression /-[name='xpress']
This will turn off HTTP compression for all sites in IIS.
In IIS Manager, double-click the server instance in the left-hand pane. Double-click the “Compression” icon in the IIS section of the center pane.
Uncheck all of the boxes, then click the “Apply” button under Actions in the right-hand pane.
Recheck all of the boxes, then click the “Apply” button under Actions in the right-hand pane.
Restart the IIS Admin service. This should enable compression and coldfusion to work at the same time.
NOTE: if for some reason you need to reverse this, run the following command from the command prompt:
C:\Windows\system32\inetsrv\appcmd.exe set config -section:system.webServer/httpCompression /+[name='xpress',doStaticCompression='false',dll='%windir%\system32\inetsrv\suscomp.dll']
INSTALLATION TASKS
Download the 64-bit installation package from Adobe – filename: coldfusion-801-wind64.exe.
Right-click the file and select “Run as administrator”.
Accept the terms of the License Agreement.
If you have an Enterprise license, enter it. For our purposes, just click the “Developer Edition” checkbox.
Select “Server configuration” – the default radio button.
I deselected all subcomponents and can’t guarantee that you’ll arrive at the same results if you select additional items like “.NET Integrated Services”. It should be fine, particularly if you install documentation. My preference was to keep the install as plain vanilla as possible.
Select the directory path for Coldfusion to install into – default is :C\Coldfusion
THE NEXT TWO STEPS ARE CRITICAL TO YOUR SUCCESS. Unselect “All IIS Websites” and select the “Configure specific IIS Website or another web server” radio button. Click “Add”, and then select your test Web site (e.g., “test-site”) under “IIS Web Site”. Hit “OK”.
Do NOT use the default directory path for the CF Administrator location (e.g., default path: “C:\inetpub\wwwroot”). Instead, point the installer to your new DEV root Web directory (e.g., “D:\DEV”). The bottom line, you want the installer to place the CFIDE directory and files within this folder, alongside your other CFML files and folders.
Enter an Administrator password.
Choose to Enable RDS, or not. I enable this by preference but it is not required. This allows you to make updates to files using a CFML editor directly vs. having to move/FTP the files over if you’re working remotely. Opponents to this argue that it’s potentially less secure, but for a lower environment I don’t see this as a major concern.
Confirm everything to kick off the install.
If all goes well you should see a message at the end stating that the install was successful. I recommend you uncheck the box that asks you to open the CF Administrator in the default Web browser after the install. NOTE: we will open it a different way during the post-installation tasks. The worst thing that will happen if you forget to uncheck the box is that you might receive an error that the command prompt hung – not a big deal – just close it and move on to the next (final) steps.
POST-INSTALLATION TASKS
Verify CF Installation:
The installation will create a new folder in your program group: Start > Programs > Adobe > Coldfusion 8. The default “Administrator” link will not work because it points to the wrong path: http://127.0.0.1/CFIDE/administrator/index.cfm. The “127.0.0.1” or “localhost” path as you may recall in IIS, points by default to the “C:\inetpub\wwwroot” directory. Our CFIDE files, however, are located within: D:\DEV.
To bring up the CF Administrator logon page, open up a Web browser and replace the “http://127.0.0.1” part of the path with the DNS path name to your CF environment (e.g., http://dev.test-site.com/CFIDE/administrator/index.cfm).
This should bring up the Coldfusion Administrator Login screen. Enter in the Administrator password you created during the install to log in and configure your application server.
Verify that your test-site renders correctly by typing in your test URL into a Web browser (e.g., http://dev.test-site.com).
Fix Application Pool Defaults to Re-enable SBS Web Applications:
At this point, Coldfusion Administrator and your test CMFL Web site should be working properly. The problem is, default SBS Web applications like OWA, RWW and Companyweb will throw errors and fail to start. Fortunately, this is easily remedied by performing the following steps:
In IIS Manager, double-click the server instance in the left-hand pane. Click on “Application Pools” to display the list of server application pools in the center pane.
In the “Actions” pane on the right-hand side, click “Set Application Pool Defaults”.
Change “Enable 32-Bit Applications” - the second item from the top – from “True” to “False” this time. This should re-enable the SBS applications, which would otherwise result in 500 errors (e.g., OWA, RWW, Companyweb, etc.). There is no need to restart IIS.
Open a Web browser and test that you can once again connect to OWA, RWW and Companyweb successfully.
In IIS click to highlight the application pool for your new site (e.g., “test-site”). In the right-hand pane, click “Advanced Settings”. Ensure that “Enable 32-Bit Applications” – second item from the top – is set to “True” for this application pool specifically.
Lastly, jump up and down for joy! Hopefully now, everything is working. Best of luck!! ..Paul D (MCP).

First, it would be a good idea for you to specify what distro of Linux you're using, as not all are supported by Adobe.
Second, this is probably your problem right here:
http://askubuntu.com/questions/40416/why-is-lib-libc-so-6-missing
In a nutshell, CF expects the 32-bit version of libc.so.6 to be in /lib, but it's probably not. You might be able to modify the installer to point to the correct location for that file, or you might be able to create a symlink to the file - but as the above link describes, creating a symlink might have negative consequences.
As for installing CF 8 64-bit, that's only available with Enterprise, not Standard. If you want CF Standard 64-bit, you need to upgrade to CF 9.
Dave Watts, CTO, Fig Leaf Software

Problem in Creation of business partner

i create business partner with the help of BAPI_ISUPARTNER_CREATE_FROM_DATA
i want to add mobile number but there is no any field such like mobile number in address data table.
But there is separate table of telephone data. When i use this table to store the mobile or telephone number at that time bapi stores the data on the telephone table in independent communication but not in direct communication fields .
Please , suggest me what i do to store the data in direct communication instead of indirect communication.
Thanks for review my post...

Hi ilesh,
There are 2 kinds of communication data -
1. Address dependent- this is linked to the address, and would need to be created / changed using BUPA_ADDRESS_CHANGE. You need to pass the BP number and the address number to which you want to link the tel / mobile number.
2. Address independent - this is directly linked to the BP, without dependency on the BP's address. You can modify such data using BUPA_CENTRAL_CHANGE.
Now, you can decide which fields you want filled, and accordingly use the correct FM. Second point - how to make sure the number gets created as a mobile, and not normal telephone. There is a field called R3 user in the table ADR2, and also in the Telephone structures that you fill while calling the FMs mentioned before. Make sure you pass the correct value of R3 user ( i think it is 2 for mobile, but you can check it by looking at the value range for this element in ADR2 through transaction SE11).By default, R3 user is 1, which denotes landline telephone. To create mobile numbers, pass R3 user = 2 (or whatever value you look up from the value range).
This should solve your problem.
Cheers,
Rishu.

Logical Systems in Business Services

Hi
In Business Service creation, for Adapter Specific Identifiers, the parameter for the Logical System. It is only possible to assign one logical system to one Business Service ?.
i.e. to do
MyBusServ1, Z_LS_1
MyBusServ2, Z_LS_1
is not possible ?
When trying to assign Z_LS_1 to MyBusServ2 I get the error that Z_LS_1 is already assigned. Is there a way to circumvent ?, I do not want to create two logical systems in R/3 as the IDOCS types submitted by the Business Services are the same.
Thanks
Damien

Thanks for the replies
Sarvesh - The Business service is the sender of the information \ IDOC. If I remove the Adapter specific config then how will XI know what Logical system to apply to the IDOC ?.
Jaishankar - I am creating two IDOC's in SAP. MATMAS and PORDCR. The input file are coming from two different source systems. lets say sys1 and sys2. Both of thse for clarity are created in my scenario as Business Services. sys 1 creates MATMAS and PORDCR IDOC's int he syatem, sys2 creates PORDCR IDOC's in the system. As sys1 and sys2 are related in that they created the IDOC's as part od the same project then I would like to collect in the same partner profile in SAP e.g. Partner Profile ZPP_IDOC with IDOC types MATMAS PORDCR that serve as input for both systems. Logically I would assume that I can assing the logical system ZPP_IDOC to both the adapter specific parameter in both sys1 and sys2.
Thanks
Damien

Impressão de Cheques - Padrão Brasileiro - SAP Business One v. 8.8

Olá Experts!
O Layout de impressão de cheques default do SAP Business One 8.8 que está pré configurado no PLD imprime cheques nos padrões brasileiros? Ou tenho que customizar o PLD para imprimir os cheques?
Muito obrigado,
Ricardo Vieira

Resolvi o problema alterando o PLD dos cheques.

Cannot retrieve business partners in SAP mobile iPad

Hello Colleagues,
since some days I'm not able to retrieve business partners in my SAP mobile App.
Neither in iPad nor in iPhone.
I tried it on 2 different test servers.
A couple of day's before I saw all the business partners.
The only change I did in the last days was executing the steps regarding the Java JRE that was recommended by SAP Note 1582526.
In the Message-Log I've found the following:
The SQL-Exception with the ErrorCode 242 points to a conversion error from the given Date-String to a DateTime Value.
The Date-String is automatically inserted by the (whatever) system, it is the current date.
Is there a possibility to change the DateTime Format so the query can pass thru and I can see the business-partners?
Thank you in advance
Rudy.

Problem solved
After setting the language of the sql server "sa" from german to english, everything works fine.
I don't know why this problem occurred. I never changed the language before...
Cheers
Rudy

SharePoint Foundation 2013 - Multi-tenant Install and OneDrive for Business with Yammer i

Hello,
After installing SP Foundation 2013 (SP1) with Partitioned service applications we have noticed that while clicking on the "yammer and oneDrive" link the below error message comes up:
_admin/yammerconfiguration.aspx
any ideas??
http://technet.microsoft.com/en-us/library/dn659286%28v=office.15%29.aspx
we have also noticed that MS mentioned "OneDrive for Business with Yammer integration doesn’t work for multi-tenancy or partitioned service applications for on-premises deployments"
ja

ULS
Application error when access /_admin/cloudconfiguration.aspx, Error=Object reference not set to an instance of an object.   at Microsoft.SharePoint.WebControls.SPPinnedSiteTile.OnInit(EventArgs e)     at System.Web.UI.Control.InitRecursive(Control
namingContainer)     at System.Web.UI.Control.InitRecursive(Control namingContainer)     at System.Web.UI.Control.InitRecursive(Control namingContainer)     at System.Web.UI.Control.InitRecursive(Control
namingContainer)     at System.Web.UI.Control.InitRecursive(Control namingContainer)     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
=====
To me it seems SharePoint social networking features require the full SharePoint Server product AND are not available with the free SharePoint Foundation, If correct then why MS punching it here in Foundation without a friendly error message..
ja

Jabber call to voice mail fails with fast busy over VPN

I have an issue that I ran into with CIPC phones over a VPN. If a CIPC phone called over a VPN and started ringing a phone the call would fail with fast busy at the time the call would be forwarded to voicemail. I found the issue was when remote the CIPC phone would negotiate the g.729 codec, when forwarded to a voicemail pilot over a SIP trunk set to g.711 the call would fail due to codec missmatch when no transcoders are present.
So now I am running into what I believe to be the same issue with Jabber, when on premise the calls to voice mail work just fine, but when remote they fail. I can directly call the voicemail pilot without error, but if calling a phone the call gets fast busy at the point we are forwarded to voicemail. Even though all my regions are set to talk to all other regions on G.711 and the voicemail SIP trunk is set to G.711, I believe with the new features in CUCM9 that a lower speed codec has been negotiated since the we are going over the VPN, or Jabber has done this as it knows it's over VPN (not sure). WIth CIPC I could go into the settings and turn off the Optimize for Bandwidth check box and the call would negotiate G.711. With Jabber I can't find anything that would tell my Jabber client to stay on G.711 and I can only imagine this is a codec missmatch as the following are true.
1. CIPC and Jabber share the same line
2. VPN established and CIPC optimised for low bandwidth un-checked
3. Over the same VPN the CIPC phone can leave a voicemail
4. Over the same VPN the Jabber client gets fast busy once forwarded to voicemail
5. Voicemail environment is Exchange-UM over SIP trunk
6. SIP trunk is assigned a Device Pool, that is assigned to a region that all other regions communicate G.711 to
7. On CIPC if optimised for low bandwidth is checked I get the exact same issue as I get with the Jabber client (fast busy when forwarded to voicemail)
Would anyone know what I can do in CUCM 9 to fix this issue, as said no issue when all devices are on premise. Wondering if there is a service parameter or a way to change the codec selection so the Jabber client attempts to always negotiate G.711. The correct answer would be to get some PVDM DSP resources and kick up a transcoder in my resource group, and that may be what I talk them into doing if I have no other options.

We have been getting the exact same thing for almost a year now... since switching to FiOS Digital Voice in May of last year! Every time I call in to report it they 'escalate' the issue but it never gets resolved. The problem seems to be in the initial connection. Most of the time it works fine but, several times a month, after I call to get messages and it starts to play the new message it goes dead and I get the busy signal. I get the same message when I call back: “I’m sorry – that account is in use at this time. Please try again later!” I have even called in with my cell phone and get the same message! I HAVE EVEN used the Internet to see if I could get my messages and, when I hit Play, I get a pop-up saying: “Your Voice Mail box is currently in being accessed; please try again later. If the problem continues, please contact our Customer Support Center at 1-888-553-1555. We apologize for any inconvenience.” This is obviously a software bug that Verizon has no clue on how to troubleshoot OR fix!!! I wonder how many people have the problem and just don’t bother reporting it because of the hassle? When it first started happening they destroyed my entire mailbox and I had to re-enter the complete mailbox setup again – 3 times!!! NEVER let them talk you into that!!! It’s their problem and they need to fix it!!!!!!! I wish I could go back to the ‘normal’ voicemail we originally had… they want hundred$ to switch back because I’d be breaking my #$@%^&* contract! Good luck if you have Verizon………

Problem with JFrame and busy/wait Cursor

Hi -- I'm trying to set a JFrame's cursor to be the busy cursor,
for the duration of some operation (usually just a few seconds).
I can get it to work in some situations, but not others.
Timing does seem to be an issue.
There are thousands of posts on the BugParade, but
in general Sun indicates this is not a bug. I just need
a work-around.
I've written a test program below to demonstrate the problem.
I have the problem on Solaris, running with both J2SE 1.3 and 1.4.
I have not tested on Windows yet.
When you run the following code, three JFrames will be opened,
each with the same 5 buttons. The first "F1" listens to its own
buttons, and works fine. The other two (F2 and F3) listen
to each other's buttons.
The "BUSY" button simply sets the cursor on its listener
to the busy cursor. The "DONE" button sets it to the
default cursor. These work fine.
The "SLEEP" button sets the cursor, sleeps for 3 seconds,
and sets it back. This does not work.
The "INVOKE LATER" button does the same thing,
except is uses invokeLater to sleep and set the
cursor back. This also does not work.
The "DELAY" button sleeps for 3 seconds (giving you
time to move the mouse into the other (listerner's)
window, and then it behaves just like the "SLEEP"
button. This works.
Any ideas would be appreciated, thanks.
-J
import java.awt.BorderLayout;
import java.awt.Cursor;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import javax.swing.JButton;
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.SwingUtilities;
public class BusyFrameTest implements ActionListener
private static Cursor busy = Cursor.getPredefinedCursor (Cursor.WAIT_CURSOR);
private static Cursor done = Cursor.getDefaultCursor();
JFrame frame;
JButton[] buttons;
public BusyFrameTest (String title)
frame = new JFrame (title);
buttons = new JButton[5];
buttons[0] = new JButton ("BUSY");
buttons[1] = new JButton ("DONE");
buttons[2] = new JButton ("SLEEP");
buttons[3] = new JButton ("INVOKE LATER");
buttons[4] = new JButton ("DELAY");
JPanel buttonPanel = new JPanel();
for (int i = 0; i < buttons.length; i++)
buttonPanel.add (buttons);
frame.getContentPane().add (buttonPanel);
frame.pack();
frame.setVisible (true);
public void addListeners (ActionListener listener)
for (int i = 0; i < buttons.length; i++)
buttons[i].addActionListener (listener);
public void actionPerformed (ActionEvent e)
System.out.print (frame.getTitle() + ": " + e.getActionCommand());
if (e.getActionCommand().equals ("BUSY"))
frame.setCursor (busy);
else if (e.getActionCommand().equals ("DONE"))
frame.setCursor (done);
else if (e.getActionCommand().equals ("SLEEP"))
frame.setCursor (busy);
try { Thread.sleep (3000); } catch (Exception ex) { }
frame.setCursor (done);
System.out.print (" finished");
else if (e.getActionCommand().equals ("INVOKE LATER"))
frame.setCursor (busy);
SwingUtilities.invokeLater (thread);
else if (e.getActionCommand().equals ("DELAY"))
try { Thread.sleep (3000); } catch (Exception ex) { }
frame.setCursor (busy);
try { Thread.sleep (3000); } catch (Exception ex) { }
frame.setCursor (done);
System.out.print (" finished");
System.out.println();
Runnable thread = new Runnable()
public void run()
try { Thread.sleep (3000); } catch (Exception ex) { }
frame.setCursor (done);
System.out.println (" finished");
public static void main (String[] args)
BusyFrameTest f1 = new BusyFrameTest ("F1");
f1.addListeners (f1);
BusyFrameTest f2 = new BusyFrameTest ("F2");
BusyFrameTest f3 = new BusyFrameTest ("F3");
f2.addListeners (f3); // 2 listens to 3
f3.addListeners (f2); // 3 listens to 2

I've had the same problems with cursors and repaints in a swing application, and I was thinking of if I could use invokeLater, but I never got that far with it.
I still believe you would need a thread for the time consuming task, and that invokeLater is something you only need to use in a thread different from the event thread.

Follow-up Business Transactions

Hi Experts,
I have a problem with follow-up transactions. I created two transactions, a Quotation and a Standard Order.
Then I created follow-up for these transactions in the copying control, ZAG --> ZTA. Now, when I create a new Quotation in the Web Client UI and I open the drop down list "create follow-up" I just can see many diferent activities like Contact, Task, incoming e-mail, etc. but no Business Transaction.
How can I display the new created Business Transaction ZTA (Standard Order) in the drop-down list?
Hope sb can help me.
Thanks.
Sebastian

Hello Sudeep De,
Thanks for your reply but thats not the problem.
Also in the standard I have the same problem. The standard also defines follow-up transaction for AG (Quotation), AG --> TA (Standard Order) in the copying control. When I log in whith the role salespro and I create a new Quotation, save this Quotation and try to create a new Standtard order with the drop-down list "create follow-up", I just can see activites but no Business Transactions. Why can I just see activities (Task, ...) and no Business Transaktions? All these activities I can see are not defined in the copying control.
Can you help me?.
PS: I can find my Business Transaction in the Web Client UI. I just can not find the Transaction in the "create follow-up" List as a follow-up transaction
Edited by: Sebastian Wilhelm on Oct 1, 2008 11:48 AM

Discoverer Report: How to find Business Area name from Report Name.

Hi
I opened a report in Disco Desktop 4 -> Resonsibiolity --> Report Name.
So I know Report name but don’t know which Business Area it belongs to.
How to find Business Area Name from Report Name?
Cheers
Vijay

Hi,
There is no relationship between reports and business areas. Each report can be built from many folders. Each folder can be in many business areas.
However you can try the following SQL which may give you the result you want for an v5 EUL. You will have to modify for Discoverer 4 EUL:
select distinct doc_name, obj.obj_name folder_name, bas.ba_name
from eul_us.eul5_documents doc
, eul_us.eul5_elem_xrefs xref
, eul_us.eul5_expressions exp
, eul_us.eul5_objs obj
, eul_us.eul5_ba_obj_links bol
, eul_us.eul5_bas bas
where xref.ex_from_id = doc.doc_id
and doc.doc_name = &your_report
and xref.ex_to_id = exp.exp_id
and obj.obj_id = exp.it_obj_id
and bol.bol_obj_id = obj.obj_id
and bas.ba_id = bol.bol_ba_id
Rod West

Business Event Appraisal in Training and event management

Hi
I am facing issue releated to Business Event Appraisal Functionality in ESS. I have maintained value as blank in field HAP00 REPLA switch.
We have created I View of transacion PV7I in ESS. When i am selecting "APPRAISAL" button for attended event , i can select appraisal form from appraisal form list. On next screen i don't get Appraisal Form where i have to give feedback on different criteria's. I get Rating column and four buttons: Save, Check data, back, Complete.
When i am executing PV7i through R3 then it's working properly. Why it is not working properly in ESS. Kindly help me ?
Other issue..... :
My client needs INSTRCUCTOR feedback functionality means feedback for instructors by participants for particular event. How we can configure in the system for TEM module not for LSO.
KINDLY help me ...
Thanks and Best Regards
Puneet

Good Day !
Unfortunately the appraisal services (my_appraisals, my_app_create, my_appraisalsm) have not been migrated for the use with integrated ITS.
Please review SAP notes 870126 and 771196
Note:
Since the appraisal services (My_appraisals, My_app_create) have not
been migrated, you can no longer use the appraisal function from the
services PV7I and PV8I with the integrated ITS.
At the same time I am afraid the succession product is not an option
for you as the TEM functionality is not integrated with the new
appraisal functionality of 'Performance Management'. Performance
Management only offers an integration with the succession product of
TEM, i.e. LSO (Learning Solution).
Hope this information helps you.
Best Regards
Chetan

Business Event Brochure in Training and Event Management?

Hi Guru's
My client has a requirement as follows. The training administrator decides the Business Event Types which for which superiors can book their subordinates or not. Those events are stored at a particular place. Once the administrator stores them, a mail should be triggered to all the superiors. Thus superior can have a list of event types for which he can book his subordinates. When he books for such events, a mail should be triggered to his subordinates regarding the training event. If an employee books for an event, a mail should be triggered to his superior for approval.
How is this possible? According to me, those events will be "Included in Brochure" (in Business Event Type Infotype). Am I right?
Please suggest me.
Points assured!
Thanks in advance.

Hello ,
see the links it might help :
Business processes of Training and Event Managment
Training and Event Management
Lots of workflow

Business Objext 5.1.2 & 5.1.6

Similar Messages

Maybe you are looking for