Business pacakges portal content

hi folks,
we are using erp2005 and have installed only r/3 abap stack.
on an other system we're running BI with a Portal 7.00; we want to install the business packages portal content of r/3 mySap erp in the BI 7.00 Portal?
How could this be done?
Where do we find the neccessary files to install/import?
kind regards oliver

Dear Dirk,
What all information i have on EhP4 is given below:
Technical name of the business function
                                                         ISHERCM_604_EXIAP
                                                         ISHERCM_604_ESOA
                                                         ISHERCM_604_UISTU
Type of Business Function
                                                         Industry Business Function
Available as of
                                                        SAP enhancement package 4 for SAP ERP 6.0
ECC software component
                                                        IS-PS-CA 604
ECC application component
                                                        SAP Higher Education & Research (IS-HER-CM)
Business function requiring activation in addition
                                                        EHP4 assumes you have ISHERCM_MAIN_IAP from EhP3
Additional components
                                                        If customers are already on FI-CA 603, EA-HR-603,    SAP_APPL_603 they need to upgrade to FI-CA 604, EA-HR-604, SAP_APPL_604. This is mandatory.
If customers have not upgraded to FI-CA 603, EA-HR-603, SAP_APPL_603, they do not have to upgrade to FI-CA 604, EA-HR-604, SAP_APPL_604.
Please check installation guides and OSS notes on pre-requisites at: www.service.sap.com/erp-inst
Hope this will be helpful.
Regards
Vinod Kumar

Similar Messages

Business Objects In Portal Content Studio

Hi All,
I Installed a business package for CRM in EP 6.0 SP09 and I created aliases SAP_BW and SAP_CRM for the CRM and BW systems and assigned roles to users and was accessing them.
The Business Objects Folder in Portal content studio was empty even after the installation of BP, but Later when I checked that I found a Folder "SAP_BW" under "Business Objects" Folder. I just want to know how did these objects come there and how
Could someone please clarify this to me.
Thank you

Hi Ignacio,
Should they be transported manually to the QA system or will they again be created automatically when I start accessing these BW iviews in QA system.
will it save me the loading time of a template if I transport this business objects folder to QA system by creating a transport package.
Thank you
Shiva

Problems downloading a business package from Portal Content Portfolio

I had problem downloading the following business package from Portal Content Portfolio:
Business Package for mySAP CRM Business Productivity Pack (60.1).
Thanks,

Hi Amr
If it is a restricted shipment you will have problems downloading this business package.
Instead you can download this from the Marketplace.
You can give
Business Package for mySAP CRM - Business Productivity Pack 60.1
in the search option of Service Market Place
Regards
Rajeev.
Message was edited by: Rajeev Ullatil

Deployment of ESS Business Pacakge failed

Hi All,
I was trying to deploy business pacakges for ESS and MSS on my system. It ran successfully for all components but in the end it returned with below error
message. Please help to rectify this error. Thanks in advance
Ajay
during deployment of ESS support pack - SAPESS12_0-20000512.SCA
Starting Deployment of tc/sl.ut.content.erp.xss
Aborted: development component 'tc/sl.ut.content.erp.xss'/'sap.com'/'MAIN_ERP05VAL_C'/'2436241'/'1', grouped by software component
'SAP_ESS'/'sap.com'/'MAIN_ERP05VAL_C'/'1000.600.0.12.0.20080317083753''/'1':
Caught exception during application deployment from SAP J2EE Engine's deploy service:
java.rmi.RemoteException: Error occurred while deploying ear file ./temp/deploy/work/deploying/tc_sl.ut.content.erp.xss.ear. Reason: None of the available
containers recognized the components of application sap.com/tc~sl.ut.content.erp.xss; it is not possible to make deploy.
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)
Deployment of tc/sl.ut.content.erp.xss finished with Error (Duration 6422 ms)
Starting Deployment of SAP_ESS
Aborted: software component 'SAP_ESS'/'sap.com'/'MAIN_ERP05VAL_C'/'1000.600.0.12.0.20080317083753''/'1':
Failed deployment of SDAs:
development component 'tc/sl.ut.content.erp.xss'/'sap.com'/'MAIN_ERP05VAL_C'/'2436241'/'1' : aborted
Please, look at error logs above for more information!
Deployment of SAP_ESS finished with Error (Duration 5922 ms)
during deployment of ESS support pack - SAPESS12P_4-20000512.SCA (SAPESS12_0-20000512.SCA)
Starting Deployment of tc/sl.ut.content.erp.xss
Aborted: development component 'tc/sl.ut.content.erp.xss'/'sap.com'/'MAIN_ERP05PAT_C'/'2461967'/'0', grouped by software component
'SAP_ESS'/'sap.com'/'MAIN_ERP05PAT_C'/'1000.600.0.12.4.20080520121039''/'0':
Caught exception during application deployment from SAP J2EE Engine's deploy service:
java.rmi.RemoteException: Error occurred while deploying ear file ./temp/deploy/work/deploying/tc_sl.ut.content.erp.xss.ear. Reason: None of the available
containers recognized the components of application sap.com/tc~sl.ut.content.erp.xss; it is not possible to make deploy.
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)
Deployment of tc/sl.ut.content.erp.xss finished with Error (Duration 5204 ms)
Starting Deployment of SAP_ESS
Aborted: software component 'SAP_ESS'/'sap.com'/'MAIN_ERP05PAT_C'/'1000.600.0.12.4.20080520121039''/'0':
Failed deployment of SDAs:
development component 'tc/sl.ut.content.erp.xss'/'sap.com'/'MAIN_ERP05PAT_C'/'2461967'/'0' : aborted
Please, look at error logs above for more information!
Deployment of SAP_ESS finished with Error (Duration 4969 ms)

Hi ,
First Apply SP14 to your Portal .
and then Deploy the ESS packages.
It Works.
I had the same problem.
Cheers
Regards
Rajendra

BI content with folder structure in portal Content Area

HI Dear Friends,
I have a requirement in my current project where i am integrating the BI reports with SAP EP.Iviews are associated with BI Reports.In the portal on clicking workset it should display folders in the portal content area with Icons instead of in Detail navigation .On click of the displayed folders it should display its sub content with Icons.
I tried in all ways but later i came to know there there is a SAP BI business package which would come up with predifined iviews associated with BI. By importing this business package we can dispaly the BI content in the portal in a folder format .
I am using BI and EP 7.0 versions.
Ratnakar

Ratnakar,
   Let me understand your requirements, correct me if I understood it wrong. You need to display BI reports in Folder structure that is similar when you log on through BEx analyzer or WAD. If this is correct, then you need to upload the BI Role which contain all the required Folder structures and it BI Queries or BI Queries url assigned to that role.Once you upload this role on to portal , you will see folder structure on PCA.
Example
BI Reports - Folder 1
I--> FI reports -- Subfolder 1
I            I--> AP reports 1
I--> CO reports -- Subfolder 2
               I--> Cost Report 1
Hope it helps,
Cheers,
Balaji

ESS application systems creation in Portal content area

Hi ESS experts,
I had struck up in the systems creation part of the ESS implementation in EP7, ECC6.
I have the ESS set up guide by Siddhartha Jain which is just short of details on how to set up the systems for system alias SAP_Webdynpro_XSS, ITS, and back end R/3 system creation in the system and how to test the connections.
Can any one give a detail guide on how to set up the various systems in the Portal content directory to that the Ess application can be launched in the portal?
I had deployed the BP as described in the guide (and guided by the forum members) and all my Jco connections are Green in color. I need to complete the system creation and user creation in the portal and launch the ESS applicaiton in portal.
(Set up the first system on the Portal J2EE server in which the business package has been implemented and assign the system the alias SAP_WebDynpro_XSS.) Here is the step I need help!!!
Please help, and thanks in advance,
Regards

Hi Vinod,
Thanks for the immediate response.
Can you please guide me on the below statement?
>>>Then you need to specify the details of that system and various other properties
Assign the aliases and then test the connectivity. <<<
I do not know which are the system details and other properties that need to be defined to get the connection test passed. I am very new to portal and I need your advise and guidance.
Please help.
Thanks and regards

Migration of portal content from EP 6.0 SP 15 to NW 2004s Portal

Hi,
Our requirement here is to migrate Portal content from EP version 6.0 SP15 to the latest Netweaver portla (NW2004s). Expecting helpful suggestions from SAP EP gurus!!!
All helpful answers will be rewarded. Gurus, please help!!!
Cheers,
L Buegg.

Leena,
These are the steps in migrating the portal content from the EP 6 SP15 to the Netweaver Portal (EP 7.0 or the NW 2004s Portal) in simple:
1. Go to System Administration -> Transport -> Portal Content. Right click on the folder, you wish to transport. Select New -> Transport Package .
2. Fill all the details (like name of the transport package, id etc) and then add the objects(iViews, Pages etc) you wish to transport to the newly created transport package by right clicking on the objects.
3. Once the objects are all added, click on Export in the object editor of the Transport package and the export happens immediately.
4. Navigate to Drive\usr\SAP\SID_Instance\Sys\global\pcd\Export of the EP 6 SP 15 Portal Server. You will see the epa file created during this export process.
5. Copy this epa file and place it in Drive\usr\SAP\SID_Instance\Sys\global\pcd\Import folder structure of the NW 2004s Portal Server. Go to System Administration -> Transport -> Import and do the import as you would import any business package.
This are the steps to export and import the portal content from one portal server to another portal server.
Hope this helps!!!
Sunitha.

No preview button or option for all ESS MSS iViews under portal content

Hi All,
We are doing a green field implementation for one of our clients, we have installed ECC 6.0 with EHP5 in R/3 system and SAP Netweaver Portal 7.02 with SP8. We have also deployed suitable ESS MSS business components from service market place.
BP_ERP5ESS 1.41
BPERPESSWDA 1.50
BP_ERP5MSS 1.51
As it is EHP5 in ECC all the Homepage framework, Areas, Sub areas, services are preconfigured for standard ESS MSS business areas.
In Portal side under Portal content - Content Provided by SAP - End User Content - Employee Self Services -
we are not able to preview any of the iViews. can anyone suggest whether what may be wrong...?

Hi Sandeep,
1. Yes we are accessing portal through FQDN
2. IE 6.0
3. I mentioned above, its SAP Netweaver 7.02 with SP8
4. Yes, the user I am using has Super Administrator role
5. There are roles for ESS in ECC
This problem of preview is for other iViews also. I mean other than ESS MSS iViews.
Thanks,
Kalam.

Portal Content Copy Folder Error

Hi,
In Portal Content Admin, the folders Key Account Manager & CRM are provided by business package and located under Content Provided by SAP -> specialist.
When these folders are copied to another folder for further customization, Key Account Manager is copied successfully but for CRM, following error message is shown:
Copy: CRM
Error
Source object not found. It may have been deleted.
Then, I tried to copy CRM's subfolder. Small folders (packages, pages, roles, templates) completed successfuly but the complicated folders (iViews & Worksets) failed with the same error message.
Although I can try to copy the sub-folders one by one, it is too tedious & error-prone.
How can the CRM folder be copied completed?
Regards,
Tony

The reason for the error is still unknown.
By the way, with the help of Content Mirroring, this error is not an issue for me anymore. Using Content Mirroring instead of Copy & Paste is also suggested by SAP document: http://help.sap.com/saphelp_nw04s/helpdata/en/ed/fd25c7c14c4094a9fbb19851d79dd1/content.htm

Portal Content missing

Hello All,
When I go to Content Administration --> Portal Content, I just see the "Looking..." message but nothing appears. After a couple of minutes "Looking" message ends and nothing is displayed.
I already deployed ESS and MSS Business Packages with SDM but I can't see the content in the Portal Content menu. I can't even see the "default" portal content.
This is my first portal installation and I don't know if I must do something to see the Portal Content in this menu. I'm using Administrator user.
Any help will be appreciated.
Regards
Francisco

Thanks Michael , it works¡
Regards
Francisco

Problems with MDM 5.5 SP05 Portal Content - ResultSet iView

Hello Experts,
We are having problems with standard iViews from MDM 5.5, more specific with ResultSet iView. We created an iView using English as default browsers language but our client wanted it in Portuguese, so in the MDM Repository both languages were defined and used in MDM Data Manager, when passed to the Portal iView an error occur, but only in a ResultSet iView from the MDM Portal Content, the others iViews (itemDetails, PicklistSearch, etc...) are shown in Portuguese, and we cannot figure out why it works fine in English and not in Portuguese. We left the default language defined by clients browser. Below Im sending the LOG, which by the way, doesn't help much, but I put it also here. Any ideas of what should I do ?
LOG ERROR:
java.lang.IllegalArgumentException: unknown format type at
We are using Portal 7.0 SPS11 and MDM 5.5 SP05 - Portal Content in a Win2003/Oracle server each.

Alex,
sorry to disturb you with this issue, can you explain me basic steps in order to setup standard MDM iviews from the portal?
I mean, I have already installed all standard mdm business content, and also have configured system and aliases in the portal to connect to my mdm repositories. Those system/aliases are working propperly.
But, when I try to preview standard MDM iviews/pages I got several JAVA errors in trace logs.
Specific iviews are: Item Details, Show products, etc..any iview execution fails.
So, am I missing something?, do i have to create a specific user in portal?, assign specifi roles or groups???.
Platform is: nw2004s SR2, SP11, MDM content 5.5
Thank you in advance.

How to perform a find and replace of Portal content?

We recently changed the URL of a business application and I would like to replace the old URL with the new URL in all Portal content items, including URL item types, Text item types, item descriptions, HTML Builder portlets, etc...
I can use the Portal's built-in search to find most instances of the old text, but can I perform a SQL query to replace the existing text fragment with a new text fragment?
TIA

This is script, we use when we refresh test environment from production. Change variables values as per your setting under define ...
login as portal
set echo on
set term on
spool changeurl.log
define PROD_DN=prodhost
define DEV_DN=devhost
define PROD_HOSTNAME=prodhost.hsys.local
define PROD_PORT=7778
define DEV_HOSTNAME=devhost.hsys.local
define DEV_PORT=7780
update wwsec_group$
set dn=replace( dn, '&&PROD_DN', '&&DEV_DN' )
update wwsec_group$
set dn_hash = wwsec_api_private.get_dn_hash( dn )
-- users (dn)
update wwsec_person$
set dn=replace( dn, '&&PROD_DN', '&&DEV_DN' )
update wwsec_person$
set dn_hash = wwsec_api_private.get_dn_hash( dn)
-- subscriber
update wwsub_model$
set dn=replace( dn, '&&PROD_DN', '&&DEV_DN' ), GUID=':1'
where dn like '%&&PROD_DN%'
-- preferences
update wwpre_value$
set varchar2_value=replace( varchar2_value, '&&PROD_DN', '&&DEV_DN' )
where varchar2_value like '%&&PROD_DN%'
update wwpre_value$
set varchar2_value=replace( varchar2_value, '&&PROD_HOSTNAME:&&PROD_PORT', '&&DEV_HOSTNAME:&&DEV_PORT' )
where varchar2_value like '%&&PROD_HOSTNAME:&&PROD_PORT%'
-- page url items
update wwv_things
set title_link=replace( title_link, '&&PROD_HOSTNAME:&&PROD_PORT', '&&DEV_HOSTNAME:&&DEV_PORT' )
where title_link like '%&&PROD_HOSTNAME:&&PROD_PORT%'
-- web providers
update wwpro_providers$
set http_url=replace( http_url, '&&PROD_HOSTNAME:&&PROD_PORT', '&&DEV_HOSTNAME:&&DEV_PORT' )
where http_url like '%&&PROD_HOSTNAME:&&PROD_PORT%'
-- html links created by the RTF editor inside text items
update wwv_text
set text=replace( text, '&&PROD_HOSTNAME:&&PROD_PORT', '&&DEV_HOSTNAME:&&DEV_PORT' )
where text like '%&&PROD_HOSTNAME:&&PROD_PORT%'
-- Portlet metadata nls: help URL
update wwpro_portlet_metadata_nls$
set help_url=replace( help_url, '&&PROD_HOSTNAME:&&PROD_PORT', '&&DEV_HOSTNAME:&&DEV_PORT' )
where help_url like '%&&PROD_HOSTNAME:&&PROD_PORT%'
spool off

Transport of portal content objects from EP 6 SP 15 to NW 2004s portal

Hello All,
     My question is regarding the transportation of portal content from a EP 6 SP 15 portal to the NW 2004s portal. We had developed a lot of content in the EP 6 portal. We had installed and configured business packages in the SP 15 portal.
    Now, we installed a new NW 2004s portal and we want to transport all the developed content from the SP 15 to the new NW 2004s portal.
    I exported all the developed content to a transport package on the SP 15 portal and the export resulted in the .epa file. I then imported it into the new NW 2004s portal. But the issue now is I am unable to see the system aliases which were created for all the systems. The systems do exist in the new portal but the aliases do not exist.
Is there anything that needs to be done to get the system aliases?
Any help in this regard is greatly appreciated.
Thanks,
Sunitha.

Hi Sunitha,
I think while exporting you have to select the option include dependant objects also to get the system alias also.
Regards
Arun

Internet exlorer 7.0 can not display crm portal content

hi gurus,
we are using crm5.0+ep7.0, we have loaded the portal content (business packages) for crm and crm high tech. the patch level is: 13 level 0 (BBPCRM is 6).
I use portal role channel manager. when we want to display some crm content in portal which runs by explorer 7.0, sap will popup another window and turn into blank with error. the ie error says: object doesn't support this property or method. and the url:http://crmdev.iecsh.com:8000/sap(ZT1PQnhTbWh6Ym01Y0R3M0JqKnQ2R1VRLS10MDlLNjhsU1Z6XzdLTmUqc2RFUjFnLS0=)/bc/bsp/sap/crm_bsp_frame/mainDH.do
while the original window is just continuing displaying the signal: loading.
with ie 6.0, it's ok.
can anyone help me out? thank you very mcuh.

Microsoft Internet Explorer 7 as mentioned in SAP Note 981710 this version is not supported by any current NetWeaver Portal / WebAS / ITS / BSP / BEX / CRM Web Application Component......
SAP Strongly recommend to our customers to block this update until this version
This version (IE 7.0) "should be" supported as of SPS19 (NW '04) or SPS10(NW 2004s) and there exist several errors found in the operation on previous releases.
be supported or the SPS be released (this is mentioned on the note), please note that once the system has performed the update there is not possible to go back to IE 6.0
For further information please refer to:
http://www.microsoft.com/technet/updatemanagement/windowsupdate/ie7announcement.mspx
http://service.sap.com/sap/support/notes/981710

Detailed Portal Content Portfolio Documentation

Does anyone know where to find detailed pictures and descriptions of the iViews inside of a business package? The documentation inside of the Portfolio Content Manager does not seem to provide a lot of detail, beyond one line descriptions. And, the documentation seems to focus on technical details. I work in IT. I would like to be able to show the folks from our business areas more information, without actually downloading entire packages. And, I am looking for a format that will make it clear to them, what specific iviews would provide.

Hi,
in the Portal Content Portfolio, you can find Screenshots for a lot of the packages.
Access the detailed information of a package and look for the link 'Screenshot Sampler'. This will open a html page containing the screenshots of the iViews or worksets.
For a lot of business packages, the business description part of the documentation focuses on the role, workset and page level, so there is only technical documentation of the iViews available. Some of them however, will also offer additional information on iView level.
Regards, Anke

Business pacakges portal content

Similar Messages

Maybe you are looking for