Business Package for DMS Connector for KM

Hi,
We have installed the Business Package for DMS Connector for KM 1.0
after downloading from the SolMan. After the install we wish to
configure it to point to the proper repository in our R/3 landscape.
But when we go to System Administration->System Configuration-
>Knowledge Management ->Content Management ->Repository Managers we do
not see a repository called DMSRMRepositoryManager. We are stuck
without this as the iView: Document Explorer is not working.
Please let us know what is the problem with this.
We are on
1) ECC6.0
2) EP7.0 SPS10
3) Business Package for DMS Connector for KM 1.0
Regards
Jay Kapadia

Hi,
I had the same problems.
Better you open a message to this issue.
In the Business package there should be two files.
epa and ear
regards,
Darijo

Similar Messages

  • "Business Package for DMS Connector for KM" not available!?

    Hello Group,
    i tried to download and install the above mentioned PLM-Package.
    Unfortunately when i tried to download it from the portal-content-portfolio, after the redirection to the servicemarketplace says "no data available".
    Additionaly the documentation says, the package could be found in the installation files - but i didn't find it there either (DMSRepositoryConnector.par).
    Any ideas? Just an temporary error of some SAP-ITS? Or am i there something to keep in mind?
    Thanks,
    Simon

    Hi,
    I had the same problems.
    Better you open a message to this issue.
    In the Business package there should be two files.
    epa and ear
    regards,
    Darijo

  • SAP DMS CONNECTOR FOR KM

    Hi,
    We have deployed "Business Package for DMS Connector for KM (BP DMS CONNECTOR KM 1.0 )" on EP environment.
    The following business Package applied on EP.
    BP for DMS Connector KM 1.0 (BPDMSCONN00_0-20000787.sca)
    We are getting the Role "pcd:portal_content/com.sap.pct/every_user/com.sap.pct.plm.dmsrmconnectorforkm.dmsconnectorforkm/com.sap.pct.plm.dmsrmconnectorforkm.roles/com.sap.pct.plm.dmsrmconnectorforkm.documentmanager_showcase"
    on the EP. We have added this Document Manager Role to the user and getting the "Document Explorer" tab/Workset on the EP header.
    But we are getting the following error on clicking on this workset
    "Portal Runtime Error
    An exception occurred while processing a request for :
    iView : pcd:portal_content/com.sap.pct/every_user/com.sap.pct.plm.dmsrmconnectorforkm.dmsconnectorforkm/com.sap.pct.plm.dmsrmconnectorforkm.roles/com.sap.pct.plm.dmsrmconnectorforkm.documentmanager_showcase/com.sap.pct.plm.dmsrmconnectorforkm.documentexplorer/com.sap.pct.plm.dmsrmconnectorforkm.documentexplorer/com.sap.pct.plm.dmsrmconnectorforkm.documentexplorer
    Component Name : com.sap.km.cm.navigation
    com/sapportals/wcm/util/pcr/PortalComponentRequestCache.
    Exception id: 04:58_12/07/07_0008_11485350
    See the details for the exception ID in the log file"
    Do we have to Install the following SAP DMS Connector apart from the Business Package already Installed?
    Navigation: Installations and Upgrades
    Installations and Upgrades> Supplementary Components for Cross Industry Solutions> Life-Cycle Data Management> SAP DMS CONNECTOR FOR KM> SAP DMS CONNECTOR FOR KM 60.1
    The File details are as follows
    SAP DMS CONNECTOR FOR KM 60.1.1 (com.sap.pct.plm.dms.dms_km_connector.epa, DMSRepositoryConnector.par and ReadMe_Notes_785193_824325.txt)
    Pls let me know how we can get DMS iViews on EP ?
    Pls guide me on this.
    Thanks and warm regards
    Purnendu

    When using the DMS Connector with EP7 please see to implament Note 1143726 - DMS-KM Connector Repository fails to start

  • DMS Connector for KM - /dmsrm not accessable

    Hi
    We have installed Business Pack DMS Connector for KM on our EP.
    I have one new iView; Document Explorer, and also workset, role and so on.
    But when I configured the repository manager, I cannot see the repository folder in the iView or in the KM Content root folder. I get this message from the iView "Document Explorer":
    "Item not found
    /dmsrm
    The item you are attempting to access is not available. Check that the name or link is correct. You might also check whether the associated repository is currently accessible. "
    Any idea?
    /Camilla

    Dear priya,
    Iam also gettin the same issue while iam trying to search the documents related to DMSRM repository.
    Some documents are getting indexed and some are unable to get indexed. when iam trying to check the
    errors in index monitor it is displaying the error as below.
    Item not found
    /dmsrm/EDIPUBLICROOTFOLDER
    The item you are attempting to access is not available. Check that the name or link is correct. You might also check whether the associated repository is currently accessible.
    Could you please provide me the possibilities to resolve this ....
    waiting for your response...
    Regards,
    Shilpa.

  • DMS Connector for KM : I see only one document type from the document area

    Hi,
    The DMS connector is installed successfully on KM.
    I can display folder tree and documents but I see only one type of document.
    I mean, when I use transaction OAC0, I see different content repository defined in DMS.
    I wonder where is the setting that specified which content is link to the DMS connector for KM.
    Thanks in advance.

    Hello Zbynek,
    I installed the DMS once, but my experience how to use it is poor.
    In the Backend ( Transaction CV01N i think,) you can store search variants using the prefix you have defined for the DMSRM (default is KM_<theName>). This variants can be used to filter out several documents. There must be a way to give authorizations on them. Maybe you will have to use a security manager, i don't know.. in our case the user persistence (authScheme) was SAP-System an no TREX involved.
    It is not much, but maybe it helps...
    best regards
    Guido

  • API for DMS Connector(KM)

    Hi,
    We configured the DMS Connector for KM on our portal. The DMS Document Explored Iview has document upload and DIR creation capabilities. We are trying to upload documents for browser(WD Java application) to DMS. We wanted to use the DMS connector functionalities. Is there a DMS Connector API which we can use in our WD Java application to create the DIRs and upload documents to DMS? Any help would be greatly appreciated.
    thanks,
    Venkatesh.K

    Hi Venkatesh,
    We had the same issue and raised an OSS message, But as per SAP there is no standard DMS Connector API's for KM at this time. They have proposed this one to be a standard for future releases. But here is a note which would give you an idea of all the Standard BAPI's in DMS. Note :766277
    Regards
    Krishna

  • BP DMS Connector for KM 1.0  & ECC 5

    Hi All,
    I'm trying to configure DMS Connector on EP6 SP16
    with ECC 5 as a backend system.
    I imported the BP DMS Connector and created a system in the portal that connects to the ECC 5 system.
    The connection is available and the backend system
    contains DMS repositories and a selection variant
    that displays 1000 documents, but when I enter the
    Document Explorer in the portal I can only see the Dynamic Folder and it is empty.
    When I use an IDES 4.7 system as the backend I can see all the folders and the documents inside.

    Hi Vincent/Roey,
    Could you guys help me sort a prob, am facing on DMS connector front.
    We followed the documentation for dms connector and when we clicked on document explorer all i get is a system error
    System Error
    An exception occurred during the program execution. Below you will find technical information pertaining to this exception that you might want to forward to your system administrator.
    Exception Class:  class com.sap.netweaver.bc.rf.common.exception.IOOperationFailedException
    Exception Message:  Connection Failed: Connection setup failedConnection Failed: Nested Exception. Failed to get connection. Please contact your admin.
    What might have gone wrong ? Could you please advice me on this front ?
    Thanks,
    Anupama

  • DMS Connector for KM and KM API

    Hi All,
    Our Client has SAP Content Server installed in the landscape, and would like to use SAP Portal (NW 7.3) KM API capabilities for document management (attachements on Custom portal application developed via WebDynpro for Java).
    Inorder to connect to the Content Server to SAP Portal as one of the repository, DMS Connector for KM is used (got to know this via some posts on SDN).
    I am still unclear if KM API can be used document retrieval and save to Content Server direcly and seconldy about the possibility of having correct version of DMS Connector.
    Any inputs on the above two points would be helpful.
    Thanks,
    Vamshi
    moved by moderator

    Hi All,
    Our Client has SAP Content Server installed in the landscape, and would like to use SAP Portal (NW 7.3) KM API capabilities for document management (attachements on Custom portal application developed via WebDynpro for Java).
    Inorder to connect to the Content Server to SAP Portal as one of the repository, DMS Connector for KM is used (got to know this via some posts on SDN).
    I am still unclear if KM API can be used document retrieval and save to Content Server direcly and seconldy about the possibility of having correct version of DMS Connector.
    Any inputs on the above two points would be helpful.
    Thanks,
    Vamshi
    moved by moderator

  • DMS Connector for KM 1.0 set DMS subfolders as root for DocumentExplorer

    I have three folders under the root folder of DMS Connector:
    Bills
    Tickets
    TechnicalData
    I want an independent document explorer iView for the first two and the third one not being displayed on the EP.
    So I put '/dmsrm/Bills' as root navigation folder and initial navigation folder. If I do this the Document Explorer shows an error saying the selected resource does not exist or is not available. If i set '/dmsrm' folder there is no problem but then I can't separate different subfolders in different iViews.
    How can I make it for the subfolders to be the root folder of Document Explorer?
    Thanks in advance and best regards,
    Ibai

    I have the same problem!!!!
    how could you solve it??
    thanks in advance!!!
    Regards

  • How to refer the class package "com.sapportals.connector" for MDM API?

    Hi,
    Iam trying to execute one example mdm api program in dynpro/ejb.
    I could not refer the class package com.sapportals.connector.
    What SCA or build path package needed for dev time and runtime and where do i get that.
    Please help me.
    Thanks
    Hari

    Hi Armin,
    Sorry that I still got problem on importing and make use of the class for knowledgemanagement. I can found the cooresponding .jar file in folder "jakarta-tomcat-3.3.2\webapps\irj\WEB-INF\plugins\portal\services\knowledgemanagement\lib". And added the services reference as "ServicesReference=htmlb, knowledgemanagement". However, I still can't use the class for KM.
    I have read those code sample from KM in SDN, but they are mentioning the programming part and not the setting. Can you suggest the detail steps and code on adding the KM class into my customize class?
    I am using Eclipse as my development tools.
    Thanks & Regards
    Sam
    Message was edited by: Sam Choy

  • Download Standard Business Packages of MM,SD for IViews

    Hi Experts,
    I want to download the Standard Business Packages for MM, SD Etc Modules.
    So from where i can get this, such that i am able to use them in Portal.
    Pls help me out.
    Regards,
    DS

    Hi,
    You can get them from the market place
    https://www.sdn.sap.com/irj/sdn/contentportfolio
    Regards
    Ayyapparaj

  • Importing Business Package more than once for different systems

    Hi,
    We have a demo portal (EP6 SP12) connecting to various SAP systems. We want to use the same Business Package for two different systems. Is there any way to import a Business Package a second time with a different system alias, without overwriting the first import, so we can point it to a different system?
    Many thanks,
    Jane

    Prakash - I had thought of this, but I would then have to recreate the pages, worksets and roles manually. Also some BPs contain hundreds of iviews so it would be very time consuming to manually edit the system alias on each one.
    Karsten - At the moment, we're interested in the ESS and MSS Business Packages but I would also like to know generally, since I'm sure in the future this will apply to other BPs for us.
    Many thanks,
    Jane

  • Where i will get  the .jar files for JDBC connector for MSSQL Server

    Hi,
    i am trying to configure the JDBC connector for the MSSQL server. For this we need to add the .jar files for MSSQL Server. Can any body tell , where i will will get the jar files to finish this connection.
    Database version is MS SQL Server 2000
    Portal version is       Portal7.0 sp9
    Regards
    vijay

    Hi Vijay,
    If you are looking for the exact steps as to how we can configure the JDBC Connector for accessing the MS SQL Server, have a look at this document:
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/b00917dc-ead4-2910-3ebb-b0a63e49ef10
    Follow the steps till page 12 of this doc.
    Bye
    Ankur
    Do reward points for helpful as well as solved answers!!

  • Installable for OIM connector for People Soft Employee reconciliation 9.0.4

    I need to install the OIM connector for People Soft Employee reconciliation and user managemnet.
    The latest release of connectors, i.e version 9.1.0. supports People Tools 8.49 and not the previous versions of people soft, i.e 8.48, etc.
    Where can I download the installation media for connector for People Soft Employee reconciliation and user managemnet version 9.0.4 as my people tools installation is 8.48 version.
    Kindly respond.

    Hi Kevin,
    Thanks for your reply,
    We are trying to install the RACF Advanced Connector in OIM.After copying Connector to the ConnectorDefaultDirectory in OIMSERVER , we are trying to install the connector from the OIMAdmin Console. We are able to see the RACF connector version in the dropdown box, when we click on the Load button we are getting the SystemError Page.
    Please let us know if there are any prequisites we need to take care before installing the connector,we dodn't find anything on this in the connector documentation.
    Please help us to install the RACFAdvanced Connecttor
    Thanks,
    Ravi G

  • DMS Connector for KM - index issues - single sign on

    We are at EP 7.0 SPS 14 with an ECC at 5.0.
    I had our basis install the BP DMS ConnectorKM 1.0 and then the support pack BPDMSCONN01 9-20000787.sca.
    I wound up with two repositories being created one called dms and the other dmsrm.  The dmsrm repository is working fine and we are seeing the expected data.  The problem comes in with searching the dmsrm repository.  We receive logon errors when trying to create the index.  We use single signon.  I found note 686776 referencing problems loging on to ABAP though KM which is my problem exactly (Caused by: com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: Name or password is incorrect. Please re-enter)
    When I went to index_service to put the ABAP user id we want to use the System drop down does not contain my ABAP system. 
    Here are the Potential reasons listed in the error box
    The selected principal does not have end-user permissions for the system.
    The system's logon method does not require any user mapping data for the system (such as "SAPLogonTicket" for a system that is not the SAP reference system). This is true - do I create another system and not enable logon ticket?
    The system's user mapping type is not set correctly or not set at all.
    There is no system alias defined for the system.
    There is no system landscape registered, for example, the one contained in Enterprise Portal.
    Any guidance on how to get my ABAP system to display in this drop down?
    dmsrm
    Description:DMS Repository Manager
    Prefix: /dmsrm
    Repository Services: Not set
    Property Search Manager:
    Versioning Manager:
    Security Manager: Not set
    ACL Manager Cache: Not set Windows Landscape System:
    Lock Manager:com.sap.pct.plm.dmsrmconnectorforkm.DMSRMMutableLockManager
    ReadOnly: YES
    ShowClassification: Yes
    ShowObjectsLinks: Yes
    ResourceValidity:30000
    StorageCategory: DMS_C1_ST
    SystemAlias: SAP_R3_QWA
    VariantPrefix:KM
    Regards,
    Diane

    1- Everyone group has end user authority
    2- System Alias SAP_R3_QWA
         *User Mapping Type = admin, user
         *Logon Method = SAPLOGONTICKET
    System does not show on the mapping tab on the index_service user.
    So I started digging to see if I could change the userid used by the index - found that but didn't help in the end....
    Changed the userid used by the index via the Global Services>Index Management Services
    User management exception: Could not get service user "xxxxxxxxx" - this user is the ID we use on our web dynpro JCO connections. So that didn't help - set it back to "index_service"
    Looking at my System definition - it works and has about 10 alias defined.  The User Mapping was already populated  in fact all items you listed were already defined as requested...the only problem is that the system doesn't show up in user mapping (WebEx is the only thing in User Mapping - comparing them nothing really stands out to me other than the systems are based on totally different templates).
    Any other fields I should check?
    Regards,
    Diane

Maybe you are looking for