Business package instructor/tutor failed at import

We get a business package instructor/tutor for  LSO and try to import it via system administration->import package.
However it failed. Could you share your experience about how to handle this?   Thanks!

Hi Linda,
Your business package should be in .SCA or .SDA file format.
This format files can not be imported through System Admin, You need to do the import using SDM.
First start your SDM and then deploy the file. This should work. If you still face problem, please provide the error message.
regards,
Kratika

Similar Messages

  • ESS Business Package Configuration

    Dear all,
    This is the first time i work with Business Packages.
    I downloaded and imported the ESS BP 4.6C - 4.7 into the SAP EP 6.0. I am using ECC 5.0 as backend. Could you please tell me the next steps i need to follow to configure the services. It is extremely urgent. Thank you in advance for your help and cooperation.
    Yours,
    Hajar

    Still waiting for your help. Thank you for your understanding.
    Yours,
    Hajar

  • Fail to import ESS business package..Urgent!

    Dear All NWDI expert,
    I have installed the NWDI and trying my first step to customize the standard ESS business package. We are on ESS business package 13.
    The following are the list of step that i have done. Can anyone tell me which step i make mistakes?
    Step
    1) Create a new track and assign the SAP_ESS release 100 to the track
    2) Copy the 3 files SAPBUILDT13_0.SCA,  SAPJEE13_0.SCA, SAPJTECHS13_0.SCA into E:\usr\sap\JTrans\CMS\inbox.
    3) "Check IN" the 3 files and check in. Then "check import" and import the files.
    4) Copy the SAPPCUIGP09_0-20001215.SCA and SAPPCUIGP09P_1-20001215.SCA into E:\usr\sap\JTrans\CMS\inbox.
    5) "Check IN" both file and "check import" for the pcuigp sca files.
    6) Import both of the file which is the original file and patch.      **(Do i need to import the patch file as well? I did not manage to import the patch file and the status shows outdated )
    7) Copy the SAPESS09_0-20000512.SCA and SAPESS09P_3-20000512.SCA into E:\usr\sap\JTrans\CMS\inbox
    8) "Check IN" the 2 files and check in. Then "check import" and import the files.
    10) Import the 2 files.*(the system show import fail and i hav to repeat all over again by creating a new track)
    When i try it for the second time, i am getting the import fail error again and below are parts from the files.
    target="_blank">39d5b802352211dcb4890030057116fe</a> exists allready in the repository. No import necessary.
    20080422111649 Info   :CBS input mode is currently PRIVILEGED
    20080422111649 Info   :waiting for 10 seconds
    The last fail give me the following log
    20080422163706 Info   :buildspace = E02_BRY_D   build request id = 231
    20080422163706 Info   :wait until CBS queue of buildspace E02_BRY_D is completely processed, before asking for build results
    20080422163706 Info   :waiting for CBS queue activity
    20080422163737 Info   :maximal waiting time is temporally increased
    20080422163737 Info   :build process already running: waiting for another period of 30000 ms
    Anyone know which step that i perfrom incorrectly and how to solve the waiting for another period of 30000ms?
    Thanks
    Regards,
    Bryan

    Hi Bryan,
    Open the CBS Web UI and navigate to the buildspace you are working on.
    a. Choose Edit and select Input Mode = OPEN.
    b. Save the new state.
    c. Try import again.
    Reward points if this solves your problem.
    Cheers,
    Sandeep

  • Instructor and tutor business package

    Dear All,
    I would like to know about instructor and tutor business package path in service market place or in SDN and also any doc for configuration if any one has implemented.I have deployed LSO BP but this package did not contain any iview or page for instructor.
    Regards
    Santosh

    Dear ALL,
    I got the solution for this it comes with the enhacement package ERP 60.2
    Regards
    Santosh

  • Error Importing Business Package for Projects 50.3.1

    Hey all
    We are trying to import and use Business Package for Project 50.3.1. Our backend system is R3 4.6C. We are getting an error while importing the package. I am pasting the dump i received. If anyone can put some light on it then please do so.
    Cannot deployed; See the following logs.
    Summary:
    ========
      There were 2 archives selected.
      0 archives successfully loaded.
       Loading of 2 archives failed.
    Details:
    ========
    1) Error loading archive
        C:\BP for Projects\BP for Projects\BPPROJECT503_1-20000646.ZIP
        (server side name is: C:\BP for Projects\BP for Projects\BPPROJECT503_1-20000646.ZIP)
        com.sap.sdm.util.sduread.IllFormattedSduFileException: The information about the development component found in the manifest is either missing or incomplete!
    Manifest attributes are missing or have badly formatted value:
    attribute keylocation is missing
    attribute keyname is missing
    attribute keyvendor is missing
    attribute keycounter is missing
    (C:\BP for Projects\BP for Projects\BPPROJECT503_1-20000646.ZIP)
    2) Error loading archive
        C:\BP for Projects\BP for Projects\SPPROJECT503_1-20000646.ZIP
        (server side name is: C:\BP for Projects\BP for Projects\SPPROJECT503_1-20000646.ZIP)
        com.sap.sdm.util.sduread.IllFormattedSduFileException: The information about the development component found in the manifest is either missing or incomplete!
    Manifest attributes are missing or have badly formatted value:
    attribute keylocation is missing
    attribute keyname is missing
    attribute keyvendor is missing
    attribute keycounter is missing
    (C:\BP for Projects\BP for Projects\SPPROJECT503_1-20000646.ZIP)
    Regards
    Bilal Nazir

    Hi,
    The syntax of the created SDA may be wrong
    Check the main attributes defined in SAP_MANIFEST.MF are equal or not to their corresponding componentelement entry.
    SAP_MANIFEST.MF file is located in META-INF subfolder in the .sda file.
    The values of "keycounter" and "counter" should be the same. Also the values of "keyname" and "name" should be identical.
    Refer this note: 1111316
    Regards,
    Padman

  • Error while importing Business Package

    I am getting an error while uploading the business package
    Error Details 
    Import failed.
    Deletion not possible: object has child objects.
    Object ID: pcd:portal_content/com.sap.pct/specialist/com.sap.pct.ivs.pcp
    Transport File: E:\usr\sap\J2EE\j2ee\j2ee_00\temp\transport\IMPORT-0825_181347_921_175de15e756fbcfb\EPT\com.sap.pct.ivs.pcp~1.ept
         at com.sapportals.portal.pcd.gl.transport.PcdGlTransportManager.handleXmlException(PcdGlTransportManager.java:641)
         at com.sapportals.portal.pcd.gl.transport.PcdGlTransportManager.importObject(PcdGlTransportManager.java:443)
         at com.sapportals.portal.transport.Transport.importObject(Transport.java:111)
         at com.sapportals.portal.transport.app.ImportRunner.importObject(ImportRunner.java:322)
         at com.sapportals.portal.transport.app.ImportRunner.run(ImportRunner.java:157)
         at java.lang.Thread.run(Thread.java:479)
    Original exception:
    javax.naming.NamingException: Deletion not possible: object has child objects.
         at com.sapportals.portal.pcd.gl.xfs.XfsContext.destroySubobject(XfsContext.java:1302)
         at com.sapportals.portal.pcd.gl.transport.PcdGlTransportAdapter.startElement(PcdGlTransportAdapter.java:252)
         at com.sapportals.portal.pcd.gl.xml.ContentHandlerManager.startElement(ContentHandlerManager.java:195)
         at com.sapportals.portal.pcd.gl.xml.PcdXMLContentHandler.startElement(PcdXMLContentHandler.java:76)
         at com.inqmy.lib.xml.parser.handlers.SAXDocHandler.startElementEnd(SAXDocHandler.java:135)
         at com.inqmy.lib.xml.parser.XMLParser.scanElement(XMLParser.java:1631)
         at com.inqmy.lib.xml.parser.XMLParser.scanContent(XMLParser.java:2164)
         at com.inqmy.lib.xml.parser.XMLParser.scanElement(XMLParser.java:1654)
         at com.inqmy.lib.xml.parser.XMLParser.scanDocument(XMLParser.java:2503)
         at com.inqmy.lib.xml.parser.XMLParser.parse0(XMLParser.java:139)
         at com.inqmy.lib.xml.parser.AbstractXMLParser.parseAndCatchException(AbstractXMLParser.java:110)
         at com.inqmy.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:127)
         at com.inqmy.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:195)
         at com.inqmy.lib.xml.parser.SAXParser.parse(SAXParser.java:276)
         at javax.xml.parsers.SAXParser.parse(SAXParser.java:346)
         at com.sapportals.portal.pcd.gl.xml.PcdXMLParser.parse(PcdXMLParser.java:97)
         at com.sapportals.portal.pcd.gl.xml.PcdXMLParser.parse(PcdXMLParser.java:65)
         at com.sapportals.portal.pcd.gl.transport.PcdGlTransportManager.importObject(PcdGlTransportManager.java:430)
         at com.sapportals.portal.transport.Transport.importObject(Transport.java:111)
         at com.sapportals.portal.transport.app.ImportRunner.importObject(ImportRunner.java:322)
         at com.sapportals.portal.transport.app.ImportRunner.run(ImportRunner.java:157)
         at java.lang.Thread.run(Thread.java:479)

    Feros,
    It looks like the Business Package is trying to replace a piece of content ( iview, page, role ect ) that has a locked child. Make sure all of your content is unlocked and reimport the business package.

  • I could not able to see Imported Business Package

    Hi
    I am using Standard Business Package for SAP CRM4.0 60.2.3; it is stored in PCD -> Migrated Content
    I customized the Business Package and stored the content in my folder and transported the Business Package to Local (on Desktop) and Server (in server: C:\usr\sap\J2E\SYS\global\pcd\Export).
    I did not deleted the Standard BP from PCD/Migrated Content
    After importing the Customized Business Package from local system i could not able to see the Business Package in PCD.
    I could not able to see the Customized BP in PCD….. , Whether that Standard BP should be deleted before Importing
    What is the Default location it stores after importing?
    Plz help me to solve this issue its very urgent.
    Regards

    Hi Michael
    For Example In CRM BP there are set of Roles in that i took only Lead Manager Role and Stored that in my folder xyz as Deltalink and i also copied dependent object pertaining to that Role as Delta link.
    In Transport Package i added all the dependent object and aswell the Role of Lead Management to that Package.
    Before Exporting the Transport Package there is a option called (Include all objects on which the exported objects depend) i checked this option and Id of dependent objects i mensioned as ex: com.xyz
    After doing this i transported my BP

  • Error in Import of Business Package

    Hi,
    I am trying to import Asset Service Business Package in EP 5.0. But it's unable to find some of .epa files and hence not uploading the Business Package correctly.
    I have successfully uploaded business package for ESS.
    Is there some problem in the Package??
    Thanks

    Um.. I thought .epa files only came in in EP6.  So you may have the EP6 version of the business package and not the EP5 one.
    Paul

  • Problem in importing ESS Business Package in EP 5.0

    Hi
    I am aiming at importing the ESS 4.6C Business Package which is a zip file into EP 5.0. At the time of import i receive a prompt saying that the files with only the following extensions can be imported into the portal.
    The file extensions that can be imported into the portal:
    CDF, XML, IVU, PCK, IVS, PAG, PGS, ROL, FLD, PIV, TPL.
    Can anyone suggest the method of importing the ESS Package into EP 5.0?
    Thanks in advance
    Regards
    Priya

    Hi
    Check the zip file to see if there is a .pkg file, the pkg file contain definitions on what are the associated files (CDF, XML, IVU, PCK, IVS, PAG, PGS, ROL, FLD, PIV, TPL). Try importing the pkg file (unzip zip).
    Regards
    Pran

  • Unable to import CRM Business Packager in the Portal

    I have downloaded the Business Package for CRM, but it was in Zip file.
    I was unable to import it in the Portal since EP6 format has to be in epa not zip?
    Please advise.
    AA

    Hi,
    CRM 4.0 Business package is available for EP 5.0 and above. When importing the business package do pay attention that you import a zip file that contains objects that are EP 5.0 version compatible such as files ending with the "PKG" extension. "EPA" extension is acceptable from EP 6.0 on.
    The package content will be available at "migrated content" in your PCD, after the import process is done.
    Regards,
    Haguy

  • I am not able to locate imported business package

    Hi,
    I have created few roles, worksets and iView for my applilcation. Then created one business package using export option. I can see .epa file in the export folder.
    Now I have to test this package before sending to other teams. I could not locate the package even after importing it.
    How should I import and test this package....
    Also should I sent par files used to create iView and system along with the business package to the other team. I have created one iView using 'New From par' and iView type is 'com.sap.portal.appintegrator.sap' and system of type 'com.sap.portal.howtos.webapp' using 'New From Par'.
    Pls help.
    Thanks in advance.
    regards,
    bhawna

    hi bhawna,
          the imported content package is imported at two different location based on two version
    as follow.
    if your portal is EP 5.0 then the package extension is ".pkg" and it is imported as your told path means "Administrator->Portal Content->Migrated Content->EP 5.0->roles-cFolders."here also depending your imported content.
    if your portal is EP 6.0 then the package extension is ".epa" and it is imported under the path " Administrator->Portal Content->content providede by sap" here in subfolders depending your imported content.
    and for your problem related cant's see the system aliases
       you have to set the permission for your newly created system.
    regards,
    hardik.

  • Regarding SAP PSS Business package import into NW 2004s Portal

    Hi All,
        I am trying to import the SAP PSS business package into the SAP NW 2004s portal. I initially tried the SAP PSS 3.0 package. I copied this downloaded business package zip file into the
    Drive:/usr/SAP/trans/EPS/IN folder structure. I then went into the JSPM folder in the Drive:/usr/SAP/SAP SID/J2EE/JSPM folder to start the deployment of the business package.
    I selected the new software component and No NWDI Control as there is no NWDI control. In the next screen, I selected the SAP PSS business package's version and hit continue to proceed to the next step.
    But, I am getting stuck with an error <b>"Error during validatiion of the dependencies of the selected Software components"</b>
    I checked the log file in the SDM folder and the log file has the following information:
    <b><!LOGHEADER[START]/>
    <!HELP[Manual modification of the header may cause parsing problem!]/>
    <!LOGGINGVERSION[1.5.3.7185 - 630]/>
    <!NAME[H:\usr\sap\EPT\JC01\SDM\program\log\sdmcl20060313201148.log]/>
    <!PATTERN[sdmcl20060313201148.log]/>
    <!FORMATTER[com.sap.tc.logging.TraceFormatter(%24d %s: %m)]/>
    <!ENCODING[Cp1252]/>
    <!LOGHEADER[END]/>
    Mar 13, 2006 3:11:48 PM  Info: -
    Starting validation -
    Mar 13, 2006 3:11:48 PM  Info: Loading selected archives...
    Mar 13, 2006 3:11:48 PM  Info: Loading archive 'H:\usr\sap\EPT\JC01\SDM\program\temp\SAPPSS02_0-2000121.SCA'
    Mar 13, 2006 3:11:51 PM  Info: Selected archives successfully loaded.
    Mar 13, 2006 3:11:51 PM  Error: Unresolved dependencies found for the following SDAs:
    1.: development component 'ep/pss/creamail'/'sap.com'/'MAIN_ERP05VAL_C'/'194412'
    dependency:
           name:     'pcui_gp/xssutils'
         vendor:     'sap.com'
    dependency:
           name:     'pcui_gp/xssfpm'
         vendor:     'sap.com'
    2.: development component 'ep/pss/common'/'sap.com'/'MAIN_ERP05VAL_C'/'194415'
    dependency:
           name:     'pcui_gp/xssutils'
         vendor:     'sap.com'
    dependency:
           name:     'pcui_gp/xssfpm'
         vendor:     'sap.com'
    Deployment will be aborted.
    Mar 13, 2006 3:11:51 PM  Error: No Software Component Archive (SCA) or Software Delivery Archive (SDA) selected. Select at least one.
    Deployment will be aborted.
    Mar 13, 2006 3:11:51 PM  Error: -
    Deployment was aborted -
    Mar 13, 2006 3:11:51 PM  Error: Error while creating deployment actions.
    Mar 13, 2006 3:11:51 PM  Info: -
    Ending validation -
    </b>
    I later downloaded the SAP PSS 2.0 to check and upload this content into the portal. But unfortunately, this also stopped at the same place with the same error.
    Could anyone please check and let me know about this?
    All the useful answers/suggestions will be rewarded.
    Thanks,
    Sunitha.

    Sunitha,
    Looks like you need SAP XSS.
    go the service.sap.com, Downloads, Support Packages and Patches , Entry by Application Group,SAP Application Components, SAP ERP, SAP ERP 2004, Entry by Component,SAP XSS (Self Services).
    -SG

  • Importing business packages?

    Hello,
    Can anyone send me some link or doc which explains how i could import "Business Packages for Specialists" in EP 6.0?
    If there is any doc that is specifically meant for importing "Business Package for SAP CRM 4.0" then it would be really great. Thanks.
    Regards,
    [email protected]

    Hi,
    The BP entry point is https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/e0c0bdca-ad6d-2910-f881-bc8202f8f8a9 which points to http://kwhelp.sap.com/SAPIKS/S47165b9df93c41b9b8a65f6c58f56f0b/KW/IWB_STRUCT9335C73C3D91995BE10000000A114084/IWB_EXTHLP8F35C73C3D91995BE10000000A114084/?LANGUAGE=EN&RELEASE=402&IWB_INDUSTRY=BBPCRM&IWB_COUNTRY=&TMP_IWB_TASK=DISPLAY for the online documentation.
    Within that, SAP note 564198 is referred for the technical documentation, and within that note, the admin documentation place is pointed out: service.sap.com/crm-inst -> SAP CRM 4.0 -> People-Centric CRM Inst. and Config. Guides. There the admin as well as the install guides can be found.
    Hope it helps
    Detlev

  • Date of import business package

    Hi all,
    How can I see when a business package is imported in the portal environment?
    I cannot browse on the portal server but I have the super admin role, so maybe I can check it via Netweaver Adminostrator?
    Thanks for the info!
    Best regards,
    G. Leurs

    Hi Juan,
    I know that I should see the components via http:<hostname>:5xx00/sap/monitoring/ComponentInfo.
    But in our Development Portal system I don't see BP_ERP5PSS. It is available in the Production Portal.
    When I browse in the PCD I see the business package in the folder:
    -  Production Portal: pcd:portal_content/com.sap.pct/every_user/com.sap.pct.erp.projectss.bp_folder
    -  Development Portal: pcd:portal_content/com.sap.pct/every_user/com.sap.pct.erp.projectss.bp_folder
    Why is it invisible on the Development Portal??
    Best regards,
    G. Leurs

  • Importing Business Package more than once for different systems

    Hi,
    We have a demo portal (EP6 SP12) connecting to various SAP systems. We want to use the same Business Package for two different systems. Is there any way to import a Business Package a second time with a different system alias, without overwriting the first import, so we can point it to a different system?
    Many thanks,
    Jane

    Prakash - I had thought of this, but I would then have to recreate the pages, worksets and roles manually. Also some BPs contain hundreds of iviews so it would be very time consuming to manually edit the system alias on each one.
    Karsten - At the moment, we're interested in the ESS and MSS Business Packages but I would also like to know generally, since I'm sure in the future this will apply to other BPs for us.
    Many thanks,
    Jane

Maybe you are looking for

  • Date and Time Sync at boot for Active Directory/Open Directory Authenticati

    All the macs in my school district are set to automatically sync their time with a network time server. They do not do this unless the system preference is opened. This poses a problem as all our users must authenticate against an Active Directory an

  • How to change the language from english to punjabi in Xcode?

    i am trying to make an app for my religon and it requires me to make those letter sysmblos and i want to know how to change a language in xcode Thankyou reply please ASAP

  • Sync my Mac Mini to my iPhone 4

    Can I sync my Mac Mini to my iPhone 4, remotely using home sharing? Basically I want to be able to sync music, movies, and audio books to my iPhone without having to dig round the back of my computer for my apple cabble. I want to know if its possibl

  • Where Clause in the block not executed

    I have this in the where clause in my block, I want to exclude managers. I have added a flag column IS_MGR to prs_employee_profile and I added this line to query(where IS_MGR <> 2) " value 2 for true" and but it doesn't work. prs_amp_profile is the e

  • Raid harddrive best practices

    Hi Im editing an indie feature on Premiere Pro CC 2014 and just bought a Lacie 5big 20tb hard drive thats configured as raid 5. Its the new thunderbolt 2 version although I have an iMac with thunderbolt 1 but it was almost the same price and has raid