Business packages for Mailing & Project Management

Hi everybody, here is my question/problem:
I'd like to integrate in my SAP Portal (6.0.15) two new functionalities. One for mailing and other one for project management.
For Mailing I've seen "Business Package for Communication", but i've red that it only works for Portal 5.0. Is this true? Does anybody know anothe B.P. for mailing in SAP Portal 6.0?
For Project Management I've seen in the SAP Software Distribution Service this one:
SAP for Professional Services Edition 2005 ==> Project Management ==> BI CONT (Component Version)
Does anybody know if this is a B.P. for Project Management?
Any replies are welcome
Thanks a lot in advance.
Alberto.

Hi,
Chk out this link, it points to Project Self Service.
http://help.sap.com/erp2005_ehp_01/helpdata/en/3f/a197422836c76ae10000000a155106/content.htm
You can find the prerequisites & the configuration required in the above link.
For this Business Package you have to install the following software components:
SAP PSS 600
BP ERP05 PROJ SELF-SERV 1.0
Regards,
Abhishek

Similar Messages

Business Package for Colloboration Projects

hi, experts
I would like to know about the deployment about PPDMC (Projects, Portfolio Management and Design Collaboration). I need to deploy the PPMDC to EP 7.0.
As follows the xRPM installation guide, I need to install the CPRXRPM_UI. Is it right?
Actually, I can not find the the installation guide of PPMDC for cProjects. I got the installation guide for xRPM.
If we do not need to follow the xRPM installation guide, can I upload the PPMDC without CPRXRPM_UI using JSPM?
Please, let me know how to figure it out.
Thank you for your concern.
from beginner (Alex)
reference as belows, from the BP for PPMDC40SP6
The Business Package for Projects, Portfolio Management and Design Collaboration
(PPMDC) 4.0 enables you to combine strategic portfolio management with operational project
management by offering access to SAP cProject Suite (cProjects and cFolders) and SAP
xApp Resource and Portfolio Management (xRPM) via SAP Enterprise Portal.
For information about the configuration process to enable the Business Package for Projects,
Portfolio Management, and Design Collaboration (PPMDC) 4.0 to run in the SAP Enterprise
Portal, see the SAP xRPM 4.0 Java Component Installation Guide on SAP Service
Marketplace at http://service.sap.com/instguides → SAP xApps → SAP xApp
Resource and Portfolio Management → SAP xRPM 4.0.

Hi Santosh
You can view the entire list of Business Packages on SDN itself. Just browse to the Developer Areas -> Enterprise Portal -> Portal Content Portfolio. On the Quick Links area, click on List of Packages. You will then be able to see the list. Check if what you are looking for is available there.
Hope that helped.
Best Regards
Priya

Business Package for PLM Document Management by ECS

Is anyone using this business package? How did you go about obtaining this? I found a link to the company (in German) but gives no purchasing information. Does SAP have a similiar package that is available for download?

Hello Ingvild,
Here is the path:
Support Packages and Patches - Entry by Application Group - SAP Application Components - SAP ERP - SAP ERP ENHANCE PACKAGE - EHP4 FOR SAP ERP 6.0 - Entry by Component - Portal Content
BP ERP TMS 1.40
- Shanti

Business Package for Land Management?

Hi Gurus,
Is there any Business Package for SAP Land Management?
If SO please let me know the Name and Version number?
Also If anybody has Portal Implementation experience in this module Kindly give me some documents............................
Thanks in Advance,
Dharani

Hi,
You can download the business package for project portfolio management from sdn.sap.com at SDN > Developer Areas > Portal > Portal Content Portfolio > Browse Content Portfolio > All Business Packages > Business Package for Project Portfolio Management and Design Collaboration.
The Business Package for Projects, Portfolio Management and Design Collaboration (PPMDC) 4.0 combines portfolio management with operational project management by offering access to SAP cProject Suite (cProjects and cFolders) and SAP xApp Resource and Portfolio Management (xRPM) via SAP Enterprise Portal.
This is compatible with the NW2004s Portal. We have used this business package for integrating the xRPM system into the Portal.
Hope this helps!!!
Thanks,
Sunitha.S

Business package for project management

Hi everybody.
Does anyone of you know something about any Business Package for Project Management?
I'd like to integrate this functionality in my SAP Portal 6.0, and maybe any Business Package should be the best way...
That's all, thanks a lot!!
Alberto.

Hi,
You can download the business package for project portfolio management from sdn.sap.com at SDN > Developer Areas > Portal > Portal Content Portfolio > Browse Content Portfolio > All Business Packages > Business Package for Project Portfolio Management and Design Collaboration.
The Business Package for Projects, Portfolio Management and Design Collaboration (PPMDC) 4.0 combines portfolio management with operational project management by offering access to SAP cProject Suite (cProjects and cFolders) and SAP xApp Resource and Portfolio Management (xRPM) via SAP Enterprise Portal.
This is compatible with the NW2004s Portal. We have used this business package for integrating the xRPM system into the Portal.
Hope this helps!!!
Thanks,
Sunitha.S

Time/LEave approval in Business Package for Manager Self-Service 60.1

Hi all,
Currently implementing ESS MSS on 4.7 system with EP 6.0 SP19.
The BP we plan to use is Business Package for Manager Self-Service 60.1.
My basic question is, we approve leave requests in BP for my SAP ERP (2004s) in the Universal worklist. How do we do the same in Business Package for Manager Self-Service 60.1. There i sno mention on time approval and leave requests approval in the MSS standard documentation ( or probably i missed it).
Any inputs in this regards are highly appreciated.
regards
Sam

Balaji,
in mySAP we had the opition to lauunch the applications in web dynpro. like launch leave approval in web dynpro. do we have this kind of optiion where the manager can approve the work item on the portal application or will it call a transaction based iview to open the work item in the R/3
regards
Sam

Business packages for Project systems

i,
I wanted to know if there is a business package for Project systems which include transactions like CJ20N, CN33, CN41N, DP81,VA23, VA25. I checked in SDN Portal content portfolio and found there is a BP for Projects 5.3 and BP for Project self service. I checked out the content which is present but not sure whether it suits my requirements.
Appreciate if any one can point to the right Business package.
Regards
PN

Hi,
Chk out this link, it points to Project Self Service.
http://help.sap.com/erp2005_ehp_01/helpdata/en/3f/a197422836c76ae10000000a155106/content.htm
You can find the prerequisites & the configuration required in the above link.
For this Business Package you have to install the following software components:
SAP PSS 600
BP ERP05 PROJ SELF-SERV 1.0
Regards,
Abhishek

Error Importing Business Package for Projects 50.3.1

Hey all
We are trying to import and use Business Package for Project 50.3.1. Our backend system is R3 4.6C. We are getting an error while importing the package. I am pasting the dump i received. If anyone can put some light on it then please do so.
Cannot deployed; See the following logs.
Summary:
========
There were 2 archives selected.
0 archives successfully loaded.
   Loading of 2 archives failed.
Details:
========
1) Error loading archive
    C:\BP for Projects\BP for Projects\BPPROJECT503_1-20000646.ZIP
    (server side name is: C:\BP for Projects\BP for Projects\BPPROJECT503_1-20000646.ZIP)
    com.sap.sdm.util.sduread.IllFormattedSduFileException: The information about the development component found in the manifest is either missing or incomplete!
Manifest attributes are missing or have badly formatted value:
attribute keylocation is missing
attribute keyname is missing
attribute keyvendor is missing
attribute keycounter is missing
(C:\BP for Projects\BP for Projects\BPPROJECT503_1-20000646.ZIP)
2) Error loading archive
    C:\BP for Projects\BP for Projects\SPPROJECT503_1-20000646.ZIP
    (server side name is: C:\BP for Projects\BP for Projects\SPPROJECT503_1-20000646.ZIP)
    com.sap.sdm.util.sduread.IllFormattedSduFileException: The information about the development component found in the manifest is either missing or incomplete!
Manifest attributes are missing or have badly formatted value:
attribute keylocation is missing
attribute keyname is missing
attribute keyvendor is missing
attribute keycounter is missing
(C:\BP for Projects\BP for Projects\SPPROJECT503_1-20000646.ZIP)
Regards
Bilal Nazir

Hi,
The syntax of the created SDA may be wrong
Check the main attributes defined in SAP_MANIFEST.MF are equal or not to their corresponding componentelement entry.
SAP_MANIFEST.MF file is located in META-INF subfolder in the .sda file.
The values of "keycounter" and "counter" should be the same. Also the values of "keyname" and "name" should be identical.
Refer this note: 1111316
Regards,
Padman

Business Package for Credit Manager

Hi Experts,
I'm trying to install the Business Package for Credit Manager (version 1.4), but I can't find any installation / configuration guides.
Here's information about the Business Package.
http://help.sap.com/erp2005_ehp_04/helpdata/en/68/81091aded544349526a18839d760b5/frameset.htm
So far, it's installed on our Portal but not working. Normally, I have to add system alias names, add roles, configure JCos etc. but I can't find any information about what's required for this Business Package.
If you can shed any light on how I can get it working on our Portal Iu2019d be very grateful.
Kind regards,
Andrew

Many thanks, great find but still can't get config info for the Business Package...see quote
In SAP Credit Management you can use a wide range of analysis and processing functions in SAP Enterprise Portal.
For more information on Business Package for Credit Management 6.01 and SAP Enterprise Portal, see the Internet at http://www.sdn.sap.com/irj/sdn/developerareas/contentportfolio.
This link doesn't work and it's refering to cofiguring a BP that's two versions older than the one I've installed.
I've checked the updated Content Portfolio and it just sends me back the link I posted in the question.
Thanks,
Andrew
Edited by: Andrew Barker on Dec 8, 2009 3:17 PM

ECM: Business Package for Compensation Specialist

Hi,
so the last ECM project I worked on, the portal resource installed the compensation specialist business package.
But now I am having trouble confirming exactly what should be installed.
On sdn, there is a great excel sheet that is recently updated, that has all the expected business packages we need and helpful information on each package (mss, ess, tms, erecruiting, etc)
Check it out:
Predefined Portal Content Integration
However, to my surprise nothing was in this list for Comp specialist.
Through various searching - i am really only finding this compensation specialist business package, which looks more like ECC 5.0, but I guess it must also work on 6.0, ep4??
http://help.sap.com/Business_Packages/EN/7D/28543F65C83B28E10000000A114084/frameset.htm
additionally, all i see in the service marketplace is:
This looks like the install file:
BPERP4CSP00_0-10003191.sca
BP for Compensation Specialist (mySAP ERP 2004) 60.2
BP COMPENSATION SPECIAL. 60.2
Last changed by sap service on:
15.12.2005
Is this really the active version that should still be used for ECC 6.0, EP4 or is it under some other name?
Thx,
Mike

>
Siddharth Rajora wrote:
> Yes these are the only versions available, no changes have been done
> so you can use it for ehp4
>
> 'BP Compensation Specialist 60.2'
>
>
> there was no plans to release a new version of Business
> Package for Compensation Specialist for ERP 6.0 (ECC 600)
>
> PA-EC is the successor product in ECC 600 and as you have
> seen this BSP works from PA-EC menu (or as a standalone URL)
>
> MSS ECM is the corresponding delivered
> functionality from the Portal side but provides
> specifically manager/employee ECM related actvities and as you have seen
> may not include exactly the same functionality as BP Comp Specialist
> - this is because product area PA-EC has
> original ownership of this BSP, we at EP-PCT-MGR-HR support
> provide support primarily for problems encountered using
> Business Package (BP) for Manager Self Services (MSS) and the
> ECM workset delivered with this BP
>
> you can refer for more information here
>
> http://wiki.sdn.sap.com/wiki/display/ERPHCM/Initialstepsin+MSS
HIi Siddharth, thx for confirming, this was my guess.
It also appears that much of the new ECM analytics integrated with BW in EP5 is being moved under the TMS 1.51 (Talent Management Specialist) Application.
If they are moving ECM reports there, I don't understand why you would not just incorporate all the BSP links / folder structures so that 'BP Compensation Specialist 60.2' could be officially retired.

External links in Business package for web editing

Hello,
We are testing Busines package for web editing (BPfWE) for 2 requirements: to show web content in portal and also to show external links in portal.
But we have problem with the latter (external links). Does anyone know how to add external links (web pages from different server) to BPfWE so we could browse internal and external web pages at one location? The problem is, that I can create new external link in Knowledge management, but unlike other documents, I can't publish it to BPfWE.
So far, we've found 2 solutions:
1. Separate BPfWE content (use it for internal pages) and classic Knowledge management content (use it for external pages) with different navigation tabs.
2. Create HTML document with javascript to open external web page and publish it with BPfWE.
But both solutions are quite strange and I still hope that external links could be shown in BPfWE as well and in some easier way. Could someone help?
Thank you,
Marek Jenej

Hi Russel,
There is a short description in the portal content studio catalog you might have seen already. Some screens have been added recently, the planed presentation is delayed for some technical reasons, so please use the following links meanwhile.
English presentation (link expires July, 10th):
http://sapmats-de.sap-ag.de/download/download.cgi?id=W3MUIX6K0852QVVBQO8KUPVRSIE4OCXSJT7MOYYTAKITJ4TJ1A
German presentation (link expires July, 10th)::
http://sapmats-de.sap-ag.de/download/download.cgi?id=AWJ14Y2T7R2T3KSWAPYM3JH6AW5FTAV2MRFOY01VP7GCGK41I3
If you need some technical information, please let Martin or me know, as we are the main contact persons for this package (please check our business cards for mail/phone details).
Please not that this is not a SAP "product", but a ready made consulting solution offered by SAP Consulting Germany. If you are interested in this package, let's discuss details together with SAP Australia (from your flag I suppose you are located in Australia).
Kind regards,
Bernd

Business Package for ECC6.0 EHP 4 Installation Guide

Hello Experts,
We have a reqt to install BP for ESS MSS compatible with ECC EHP 4 and identified below versions
BP ERP05 ESS 1.41
BP ERP05 MSS 1.41
BP ERP05 COMMON PARTS 1.41
BP ERP05 BUYER 1.41
BP ERP05 HR ADMINISTRATOR 1.11
....few others
Queries below -
1 - Link : [http://help.sap.com/erp2005_ehp_04/helpdata/EN/76/77594d165144a1a9bff9aae1e26b26/frameset.htm] under prerequisites : Business Packages are mentioned:
○       Business Package for Manager Self-Service (SAP ERP) 1.3
○       Business Package for Common Parts (SAP ERP) 1.3
○       Business Package for Project Self-Service (SAP ERP) 1.0
○       Business Package for HR Administrator (SAP ERP) 1.1
Should we upload the above BP before we deploy main packages like ESS 1.41, MSS 1.41 and HR Admin 1.11?
2 - We need to download and install BP from both paths - "installation and Upgrades" and "support packages and patches" in SMP one after the other?
3 - Installation sequence to be followed is PCUI_GP followed by Common Parts?
4 - I am unable to locate any proper installation guide for BP.
Thanks for your inputs,
Dhanz

Hi Dhanz
See the following guide for details
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/e0df0afb-44fb-2b10-46b1-c026264bcbc4
In order to calculate which SP packages to download from /swdc please see
https://www.sdn.sap.com/irj/scn/wiki?path=/display/profile/marcio+leoni
--->HOW TO GET RID OF SP STACK MISMATCH ISSUES
This tells you which BP or XSS packages work together and which back-end SP levels works with them
Good luck
Stuart

Need to know the Business Package for CRM4.0 Sales in EP6.0

Hi experts,
We are trying to implement the CRM4.0 Sales business package in our EP6.0 environment( Our Backend R/3 is in 4.6B) . We would like to install complete package for the Sales module (The main (Top level) menus in the portal look like the following ==>
Activities.. Account Management ... Acquisition.. Sales .. Products.. Analysis..   Home.. R/3 Integration .. CRM integration .. APO integration..
Below every top level menus there are sub menus.. For example under Sales we would have the folliwng ( Overview.. Quotation.. Orders .. Contracts.. Billing Documents )
In the list of package from CRM (available in the SDN) the following looks like the currect one, can anybody advice please.
Business Package for SAP CRM 4.0     60.2.3   SAP AG   Unrestricted Shipment.
However, since we are only interested about the Sales Portion only can we choose to import content that is relevant only to the CRM SALES as well as CRM SALES analytics and not anything else? If it's possible the what is the procedure? If not then I assume that we will have to import the entire content and activate only the portion that we need. Please advice.
Appreciate a detail reply.
   Thanks
Arun

Hi Arun,
When u download and apply a busiiness pacakge u will get the complete package.
After appling the bussiness package u will get a report showing whcih all roles worksets etc are added to the portal. And also In portal contants there will be a folder created. There u can see the roles , worksets pages iviews etc.
You can edit the role and put the desired iviews or pages according to u r demand.
Hope this Helps
gEorgE
Read the log file(generated after importing the BP) it will give u all the information abt the contents that are uploaded to the portal server.

Business Packages for Maintenance Technician

Hi all.
We imported the Business Package for Maintenance Technician and previously we followed the prerequisites on the documentation.
For the step "You have set up the system alias SAP ECC Manufacturing in the portal" the alias was created for the system SAP_R3, I simply create the alias n no more.
When i try to execute the preview of any iView i.e. "Create Confirmation" the following error appears:
"Exception in SAP Application Integrator occured: Application URL ':///sap/bc/webdynpro/sap/rman_prsp_conf_app/;sap-ext-sid=x2bvhbLxismPPWD3O5rgfA%3D%3D7AFrHLsz6dPb8oNUuj4jqg%3D%3D' is not valid! Please check the protocol and host entries for system 'SAP_ECC_Manufacturing'..
Exception id: 12:03_26/02/07_0022_19277150
See the details for the exception ID in the log file"
Does anybody knows what i have to do or where am i wrong.
Thx.
Best Regards.
Gregory.

Hi Vicky.
Sorry about the delay.
I think the order is not too important, only the first step: installation of the business package for common parts.
I recomends u follow the prerequisites on http://help.sap.com/saphelp_erp2005vp/helpdata/en/04/5cd2416d9c1c7be10000000a1550b0/frameset.htm
Also have a look to the oss notes: 517484 n 921051
Define a SAP_R3 system into the portal with the following properties:
1) Connector
Application Host: <ur ECC hostname> (complete)
Remote Host Type: 3
SAP Client: <ur ECC client>
SID: <ur ECC system ID>
SAP System Number: <ur ECC system number>
Server Port: <32 + SAP System Number> (i.e. 3201)
System Type: SAP_R3
2) ITS
ITS Host Name: <ur its host name>:8000
ITS Path: /sap/bc/gui/sap/its
ITS Protocol: http
3) WAS
Web AS Host Name: <ur ECC host name>:8000
Web AS Path: /sap/bc/webdynpro
Web AS Protocol: http
4) User Management
Authentication System Type: <a value that applies for ur system>
Logon Method: <a value that applies for ur system>
User Mapping Type: admin,user
And with the aliases: SAP_ECC_Manufacturing n SAP_ECC_Common.
I hope it helps u.
Regards.
Gregory.

Business packages for BO in portal

Hi Team,
I wanted to know if there are any business packages for Business objects which can be implemented in Portal.
i tried to search in market place but am not able to find much.
regards
Bharat

Hi,
it depends which product you mean by "BO"
the business objects family has a number of product portfolios :
"Business Intelligence" ,
"Information Management"     (traditionally ETL and ELT tool like Data Service, Master Data Quality & Management etc)
"Performance Management    (these are aligned by Line Of Business/functional area as per the SAP Business Suite modules, include FIM, BPC, SEM etc)
"Governance"
together they are called "Business Analytics", and they each have their own integration points with various SAP software.
But, for pure BusinessObjects Enterprise (Xi 3.1)    you are really only looking at :   Business Warehouse or ERP/ECC (Datasource) + Netweaver (Web App server) + Enterprise Portal (content management) or NW business Client.
Regards,
H

Business packages for Mailing & Project Management

Similar Messages

Maybe you are looking for