Business Partner address in GTS is "garbage" characters
We are testing our upgraded ECC 6.0 system and if a customer master in ECC has an international version maintained (Kanji) the business partner address in GTS (version 7.1) has garbage characters for that business partner. Do I need to make an adjustment in ECC to /SAPSLL/DEBMAS_SLL so that it pulls the address data from the customer General data screen (always maintained in English there) rather than from the International address screen?
These customers looked correct in GTS when we were on ECC 5.0.
Any thoughts?
Thanks.
Hello Vicky,
what is your highest support pack installed on ECC6 and on GTS? Did you search for notes?
General question, in case you wont transfer international addresses would be the GTS user happy not to have this information is GTS? For instance for preference mngmt it is required.
Cheers,
Gabriel.
Similar Messages
-
How to look for business partner number in GTS
Hi Experts,
How to look for the business partner number in GTS when we have the Customer Id number in r/3?
Please let me know the path in GTS.
Edited by: Anurag87 on Dec 9, 2010 2:17 PMHello,
just simple in GTS in transaction BP find by "3 External number" (which is yours R/3 number).
Or in se16 table /SAPSLL/PNTBP type in field BPVSY you external number from R/3 system.
Cheers,
Gabriel. -
Business Partner Address Template Import
We are importing Business Partner Address Template showing error
"invalid item 'S' in enum 'BoAddressType' oBusiness PartnerUSe
bo_ShipTo for ShipTo Address
bo_BillTo for BillTo Address -
Business Partner Address not populating
Hi,
The Business partner address field is not getting populated properly. We did a full load last week and still we could not see those addresses for certain business partners. However we were able to see the addresses in RSA3 and PSA too but not in the InfoObject. Can anyone throw a light on this issue. Anything will be highly appreciated.
Thank You,
Kishore
Edited by: Mayank Agrawal on May 11, 2010 10:41 PMHi,
As the data is getting populated successfully till PSA there should be no problem with the datasource.
Now, if you are using 3.X, then check for the transfer rules and update rules also check whether
any routines have been implemented and check the routine for any logic implemented in filtering/hiding/removing the address data. Try to debug the same using "simulate update" option over any datapackage.
If you are using 7.0 then check in the transformation for the mapping of fields or any routines implemented in
filtering/hiding/removing the address.
Regards,
Lakshminaraasimhan.N -
CRM Datasources for Activities & Business Partner Address
Hi Experts,
Can you please help in understanding following issue?-
For both these datasources-
1) 0CRM_SALES_ACT_1
2) 0BP_DEF_ADDRESS
I can see huge queue stacked up in CRM side in tcode SMQ1/RSA7.
But delta loads for these datasources bring exactly 1 millions records every day and this is happening since last month.
Even after delta load completes, I don't see corresponding decrease in delta queue entries.
-For second datasource delta queue entries are varying around 21+ million records
-For first one its varying from 5 million entries to 7 million entries
It started happening around the time when people from CRM team loaded data in huge amounts in CMR from other lagacy systems. Historical data loads & conversion in CRM is finished long time back but queues for some cases are still stuck at big numbers.
-->When I double click on queue, following is the status-
"NOSEND"
-->Further double click on it gives following two types of entries-
a) Transaction Recorded
b) Message Edited in Target System
Any helpful responses are welcome.
Thanks,
Arun PurohitIn R/3 you can check
WB2_PARTNER_ADDRESS_CREATE
also confirm in which system u need to create the business partner address.
Additionally you should also check out
BAPI_BUPA_ADDRESS_ADD
BAPI_BUPA_ADDRESS_CHANGE
BAPI_BUPA_ADDRESS_GETDETAIL
BAPI_BUPA_ADDRESS_GET_NUMBERS
BAPI_BUPA_ADDRESS_REMOVE
These may be helpful
Regards
Alok Pathak
Message was edited by: Alok Pathak -
How to Remove Business Partner Address using DI Server
Hello,
I need to remove Business Partner Addresses using DI Server, the example in the SDK only mentions the remove of the entire business partner, but I need to delete only one of the business partner addresses, how can it be done?Hi,
the usage of the "UpdateWithSubDeletion" method of B1 object atom might be an option.
You need to update the complete business Partner with the changed amount of addresses.
The usage is tricky, you need to retrieve the BP, which you want to update, first via synchronous retrieval method using import/export mode.
From the retrieval result you should start to update every segment with all fields including the BPAddresses segment in exactly the same sorting order as displayed from the synchronous retrieval.
Best regards
Bastian -
Updating business partner addresses in CRM
Hi,
I Need to build a interface to update business partner addresses in CRM and assign it to a address usage. I can not find a suitable FM/BAPI for this purpose. Please advise me how to accomplish this.Hi,
Where do you start to activate or configure Business Address Services in R/3 Business partners. Any links to user guides or startup documents will be greatly helpful.
Thanks very much
Cheers!
Padi -
Find the SetCurrentLine in Business Partner /Addresses/ billing address
I am using B1 2004.2 B
In this below example:
oBp.Addresses.SetCurrentLine(0)
oBp.Addresses.AddressType = BoAddressType.bo_BillTo
oBp.Addresses.AddressName = "Test1"
oBp.Addresses.Add()
oBp.Addresses.SetCurrentLine(1)
oBp.Addresses.AddressType = BoAddressType.bo_BillTo
oBp.Addresses.AddressName = "abc"
My requirement is to synchronies the BP master with another database.
I have some issues in Business Partner /Addresses/ billing address.
How to find the SetCurrentLine in oBp.Addresses.SetCurrentLine(XYZ)?
I see a Line number in CRD1 table, is that refers to the line number which I can use in oBp.Addresses.SetCurrentLine(xyz) ?
I tried it but it fails, the line number is based on the order in which the records are displayed in the BP/Addresses/ billing address Screen.
For example:
Address Linenum
Abc 1
Test1 0
In the above example Test1 is added first and Abc is added second.
So the line number is 0 and 1.
When the records are displayed in BP/Addresses/ billing address Screen,
it displayes Abc first and Test1as second record.
So according to the screen display the Abc is line 0 and test1 is line 1.
But in the database the values are vice versa. So when I want to update the
Values using the DIAPI , I need to know the value for SetCurrentLine(XYZ)
How can I find it?Line number in CRD1 table has nothing to do with SetCurrentLine.
SetCurrentLine index depends on the order of
the records displayed in BP/Addresses/ billing address Screen, which is sort by
Name. -
Unable to replicate Business partner Address
I am replicating Business Partner(BP) from ECC 6.0 to CRM 7.0.
r3am1 shows that all objects have been loaded sucessfully....however when I enter data using bp transaction in ECC the address doesn't get replicated in CRM.
the adress fields show up empty in CRM....whiel all other fields are populated.
Anyone has any idea how to solve this problem?
I will be grateful for any clue.
Regards,
NasreenMunish,
Thank you very much for replying.
My problem was solved by re-loading the customizing object DNL_CUST_ADDR
Regards,
Nasreen -
Query regarding Business Partner Address in SAP B1?
Hi Friends,
WHile i extract SAP datas for my ETL Product,I found some issues..Hereby i m telling the steps to reproduce that in Demo database of OEC Computers..
1.Open SAP B1 Business Partner data
2.Open C40001 Business partner data..
3.Open Addresses tab of that Business partner
4.Click Bill to Address..And u can c no datas is present for that BP 'C40001'.
5.And Open OCRD in Sql Server.. And u can c Address as '208 Hollywood Av'and ZipCode as '28989'.And it's present in XML of that Business Partner data but not shown in UI in Address tab..
6.Where these datas are present in Business Partner UI..How can i view those in UI?
Please give me a clear information for that..
Thanks in Advance
regards
Sooriyakala.PHi Sooriya,
I was able to reproduce the issue in our demo database.
This is most likely just an anomaly in that specific database, maybe created by manipulating the database directly.
The actual data of the BP Addresses grid comes from CRD1. The third shipping address for BP 'C40001' actually seems to have the same information as in OCRD.Address.
The Address field in OCRD is just a convenience shortcut that should duplicate whatever is written to the single billto address for that customer. You're right that the field should be empty as there are no billto address rows in CRD1 for that customer.
I'm pretty sure you will not be able to reproduce this in a real live database. However, there are other issues to watch out for with BP addresses. For instance with SBO 2004, there is a issue regarding updating the name of a billto address. If you do it with DI API (or with DTW), you will end up with two billing addresses. This cannot be done in the client, as it is against the validation rules. The nasty part is that DI API does not currently support removal of BP addresses. It's no fun doing it manually for 4000 customers
Henry -
Problem in business partner creation in GTS
Hi experts,
To create business partner in GTS I have used BAPI_BUPA_CREATE_FROM_DATA. It is creating business partner but it is not updating the table u2018 /SALSLL/ADRCONu2019 which is necessary for SPL check in GTS. Is there any functional module / RFC specific to GTS which will create a business partner as well update the u2018 /SALSLL/ADRCONu2019 table?
I also tried to create a custom RFC by recording the transaction FS00001 in GTS(sap netweaver 2004s) for the same purpose. This RFC is working fine in GTS system ( without RFC call) but while calling this RFC from another R/3 system(4.6C) it is giving the error u2018Control Framework : Fetal Error u2013 GUI cannot be reachedu2019 . Any solution or workaround for this issue?
with regards,
S.JanagarHi
Can you kindly suggest the SAP note number please. Even we ar efacing porblem to transfer ECC BP's to GTS.
we are creating BP's in CRM and replicating them in ECC and wish to transfer these to GTS for SPl screening - this is the sceranio. Would be glad if you can suggest on how to achieve this.
Thanks
Rajan -
Business partner address issue
Hi Experts,
I am involved in a CRM upgrade project from 4.0 to 5.1.
There is a typical problem.
For some business partner types, all the BPs are having double address maintained in the database,i.e., the address of the business partners are maintaned twice, though only one address has been entered for them during BP address entry.
So whenever we are working with tcodes like opportunity, it is prompting us to select one of the address from the pop-up. Whenever we are entering any partner value in the Partner tab, a pop up comes to select one of the address though both the addresses are same.
What I saw in ADRC table is there are 2address no.s maintained for the same address.
No clue why it is happening and how to rectify it.
Please help, its an urgent issue.
Regards,
SangeetaHi,
You can write an executable report to determine the duplicate addresses and then delete them selectively from ADRC table using the API
BAPI_BUPA_ADDRESS_REMOVE
or using delete statement and then calling
commit_work
If you are using mobile sales application and having the same problem, then i would advise you to use Middleware concepts of Bdoc creation to create bupa_main Bdocs with the delta mode set properly for address and then trigger the mobile bridge programmatically to create the relevant sBdocs and replicate to the clients.
Also, if you would this problem in R/3, then you would need to trigger the bupa_main adapter object upload using request loads.
Reward if helpful.
Thanks,
Sudipta. -
Formatted search - Copy Business Partner address of active screen
Hello,
I am using a credit card addon that creates a tab in Business Partner Master Data labeled "Credit Card". On this tab, credit card information is stored for the business partner. This includes CC Name, CC Type, CC Cardholders Name, CC Number etc.
Credit cards are added on this tab, similar to an address being entered on the address tab. You have to click "Add New"
The business process is the following:
- CSR receives call from random customer (no BP data exists)
- CSR creates new BP
- Enters address for Bill to and Ship to.
- We are required by this addon to enter address on credit card for a third time. This is where we would like to streamline the process by creating a formatted search to copy the Bill to information from the Address tab, to the address information on the credit card tab.
This is where my dilema is. I am not sure how to capture the active record's information and bring it over to the credit card tab.
Does anyone have an recomendations?
John SeftonFrom what I have noticed. You can create individual FMS and place them in the respective fields in the CC Tab. I could only test this on the BP Remarks and they seem to work.
For Address Name
SELECT $[$178.1.0]
For Street
SELECT $[$178.2.0]
For Block
SELECT $[$178.3.0]
Please enable system information from the VIEW menu for the other field co-ordinates -
How to change Business partner PERSON in GTS system
Hi,
I have developed an program to create business partner (Person, Contact person and Organization). But now I have to include code for changing Business partner.
I have used BAPI_BUPA_FS_CREATE_FROM_DATA2 BAPI for Person creation. But now I am not finding any BAPI to change PERSON business partner.
Let me know a BAPI or any other way to change PERSON BP.
Thanks
Atanu DasHi experts,
I am facing the exact same issue and was wondering:
1. Are there specific authorization objects that I can use to limit access on the web UI based on BP roles? I found authorization object B_BUPA_RLT. But does this work for just SAP GUI or web GUI as well?
2. I have read threads relating to another solution, to use a BADI to alternate configuration views. Are there any other alternative solutions that are purely configuration based?
Vinay,
Could you provide details on which solution you eventually went with to solve your problem?
Thanks,
jo -
Sales Order not transferring business partner function to GTS
We created a new Quality client and I am doing the necessary configuration to connect it with our GTS Quality client. We are running GTS 7.2.
To make it easier in the future I've decided to set up a Feeder System Group that we can add Quality clients to and not have to do a lot of configuration each time. Here are the steps I've done:
1. Created a new logical system for the new quality client
2. Created a new feeder system group
3. Assigned both the new feeder client and the quality GTS client to the feeder system group.
4. Assigned the company code and plants to the new feeder system group
5. Assigned the partner functions to the feeder system group
6. Assigned the sales document types and item categories to the feeder system group.
The new sales document is created and transferred to GTS. I then go in to display blocked documents and my new sales document shows up. When I check the log for why it is blocked I get the error "None of the partner functions to be checked are in the document". This error shows at the line item level for SPL.
When I look at the document that has been transferred to GTS in the Partner tab I see that the Partner was transferred by the field for the partner function is blank/empty. I believe this is what is causing my problem but I do not understand why that field is not transferring over.
I think I'm missing something in the configuration set up but I cannot figure out what.
Thank you for any help!
TamiHi Dave,
I found the logs in SLG1. I just ran it wide open without the objects and was able to find the information you are talking about. The error message it is reporting is "None of the partner functions to be checked are in the document." I looked at the embargo configuration and it's wanting to see these partner functions, AG, RE, RG, WE, EN, etc. I do have those partner functions mapped and I am using the German ones.
You said that you think there should be a warning telling me why the partner function is not transferring along with the partner. I'm not seeing that kind of warning, only the fact that the functions aren't in the document. This is more of a log telling me why the document is blocked.
Is there possibly another log other than SLG1 that would give me different information? A log showing the transfer of the doc from ECC to GTS?
Thanks.
Maybe you are looking for
-
All fields are not visible while creating transformation
Hi experts, I am trying to create transformaion between a LO datasource and DSO designed by me. In R3, in RSA6 I can see more than 45 fields but while creating transformation only 30 fields are available. I tried by replicating the datasource multip
-
I can't see my external hard drive in the event library.
I need to move my Imovie to a external hard drive to free up space. I can not view the external hard drives in the Event libary of Imovie. I have formated the hard drive to mac os PLEASE help urgent
-
How to change the Excise Duty ?
Hi, How to change the Excise Duty from 16% to 14%. We treid to chage in the Tcode J1ID. But its effects are not showing in Sales order. What is the customization to get these effects??? Regards, Dhanunjaya Reddy
-
My iPhone has developed a large amount of "other" as shown on how the capacity is used when sync in iTunes. Even eliminating songs, ovies and all other sync items it still uses 4.3 GB of other. This is a relativily new development. How can I deter
-
Database lookup fails with CMP bean and J2EE1.4
What else could I have missed? Running my client, I am getting the following error in the J2EE server: RaceControllerBean ejbCreate RaceControllerBean leaving RaceControllerBean createRace RaceControllerBean makeConnection javax.naming.NameNotFoundEx