Business Partner Address not populating

Hi,
The Business partner address field is not getting populated properly. We did a full load last week and still we could not see those addresses for certain business partners. However we were able to see the addresses in RSA3 and PSA too but not in the InfoObject. Can anyone throw a light on this issue. Anything will be highly appreciated.
Thank You,
Kishore
Edited by: Mayank Agrawal on May 11, 2010 10:41 PM

Hi,
As the data is getting populated successfully till PSA there should be no problem with the datasource.
Now, if you are using 3.X, then check for the transfer rules and update rules also check whether
any routines have been implemented and check the routine for any logic implemented in filtering/hiding/removing the address data. Try to debug the same using "simulate update" option over any datapackage.
If you are using 7.0 then check in the transformation for the mapping of fields or any routines implemented in
filtering/hiding/removing the address.
Regards,
Lakshminaraasimhan.N

Similar Messages

Business Partner address in GTS is "garbage" characters

We are testing our upgraded ECC 6.0 system and if a customer master in ECC has an international version maintained (Kanji) the business partner address in GTS (version 7.1) has garbage characters for that business partner. Do I need to make an adjustment in ECC to /SAPSLL/DEBMAS_SLL so that it pulls the address data from the customer General data screen (always maintained in English there) rather than from the International address screen?
These customers looked correct in GTS when we were on ECC 5.0.
Any thoughts?
Thanks.

Hello Vicky,
what is your highest support pack installed on ECC6 and on GTS? Did you search for notes?
General question, in case you wont transfer international addresses would be the GTS user happy not to have this information is GTS? For instance for preference mngmt it is required.
Cheers,
Gabriel.

Business Partner can not was created in a hire

Hi, Good night.
I have the following issue. I am check an employees that was hired with earlier date to the current date and not generated Bussiness partner. I understant that the system not create the business partner when the employees are hire to future date.
However i did the hire in the client of test and the system if create the BP. The question is:
What are the reasons for which a Business Partner can not be created in a hire, in the role of employee?
Regards
sanew2

Hello,
Please check if infotype 6 (addresses) is maintained for the employee. If not maintain a record for address and try.
Also, what are the infotypes that you create for an employee during hire?
Br,
Remya.

Updating business partner addresses in CRM

Hi,
I Need to build a interface to update business partner addresses in CRM and assign it to a address usage. I can not find a suitable FM/BAPI for this purpose. Please advise me how to accomplish this.

Hi,
Where do you start to activate or configure Business Address Services in R/3 Business partners. Any links to user guides or startup documents will be greatly helpful.
Thanks very much
Cheers!
Padi

Err while confrm Business partner does not exist (Notification E R1 201)

I am for the first time into CRM serv implementation.I have 2 issues. Please provide your valuable suggestions at the earliest.
I raised a serv order, released items, confirmed it and changed the status to complete. now when i try to raise an invoice, in billing due list, serv order num is showin up but not confirmation number. Billing relevance in item category for
service item in Serv order ---> Order related billing acc to order quantity
confirmation item category--> Transaction related billing after completion.
The reason i expect is that i have used a crm employee as employee responsible as HR is not yet in place. At the time of confirmation and data transfer to r/3 system is throwing a message that BP doesnot exist. Long text is as follows
"Business partner does not exist (Notification E R1 201)"
I am unable to trace out which BP is it unable to find. The Sold to i am using is on the other hand available in R/3.
1) Is service confirmation incomplete and hence is not appearing in Billing due list or is there any other reason?
2) How can i analyse which BP number is not avilable. i.e.. how can i check the contents of bdoc system is sending and because of which value of BP is the transfer getting stopped
Regards,
Kiran

Hi
The link is not working.
The contents of the message is as follows
follow all the following steps
Setting up Transfer of Employee (HR Master) from R/3 to CRM
1. Logical system XXX assigned to R/3 client XXX. Logical system YYY assigned to CRM client YYY view through SCC4
2. Create RFC Destination YYY for CRM client YYY in R/3 and
Server ID with user details and client YYY.
3. Transaction code SALE : Application Link Enabling (ALE)  Modelling and Implementing Business Processes  Maintain Distribution Model and Distribute Views. (Direct transaction code : BD64)
Go to change mode and select Create Model view.
You get a popup. Fill in the details Technical name, short text and validity
Select Add message type from the application tool bar.
Fill in the following details
Model view : HRCRM
Sender logical system : XXX
Receiver logical system : YYY
Message type : HRMD_ABA
Note : Only this message type works for employee transfer.
4.Save the model. From the same screen select the distribution model and from the menu Environment  Generate partner profiles
Dont change anything in the next screen. Simply Execute.
4.Distribute the distribution model HRCRM
Select the distribution model. From the menu bar, Edit  Model View  Distribute
You get a dialog showing the receiver logical system. Execute.
You get a log Model view HRCRM has been created in target system YYY
5.Go to the CRM system and check up whether this model has been created.
Transaction code BD64
The model has got copied. No changes can be made in CRM
6. Generate partner profiles for the distribution model in CRM by selecting
Environment  Generate partner profiles.
In the next screen, do not make any changes and Execute.
Partner profiles can be seen in transaction WE20
Delta Download Settings
7. So far, the above settings will ensure the initial download. However for any changes / new employees to be transferred, i.e delta changes, changes pointers need to be activated.
In R/3, Transaction code SALE, Application Link Enabling (ALE)  Modelling and Implementing Business Processes  Master Data Distribution  Replication of Modified Data  Activate Change Pointers Generally (BD61)
This activates change pointers globally for all message types.
8. In R/3, Transaction code SALE, Application Link Enabling (ALE)  Modelling and Implementing Business Processes  Master Data Distribution  Replication of Modified Data  Activate Change Pointers for Message Types
Activate change pointer for message type HRMD_ABA
9. CRM : Number Assignments. Generally, there are 3 types of number assignments (also called switches) when business partners are created.
1 The system uses the number from the general internal interval of the number
range object BU_PARTNER
2 The system uses the number from a specific internal interval of the object
3 The number is transferred from HR and a prefix is added. In this case, a specific external interval, which must be defined as XX00000000 (upto
XX99999999), is used (where XX denotes any two letters).
The number range object for all switch positions is BU_PARTNER, with the interval depending on the switch value.
For switch value 1, the system uses the internal standard interval, otherwise for switch values 2 and 3 you must also create a grouping (transaction BUC2) for these intervals. For the system to be able to connect the grouping and the number range interval, the name of the grouping must be exactly the same as the name of the corresponding number range interval (the name of the grouping is contained in the first column of the table). If you select 3 (HRALX/PNUMB = 3) for the number assignment of busienss partners of the employee role, create HRALX/PSUBG switch manually in table T77S0.
In table T77S0, HRALX/ONUMB is used to set the number assignment for organizational units and HRALX/PNUMB is used to set the number assignment for employees.
Create a number range ZZ
Transaction code BUC2. Create a grouping of the same ID as that of the number range. Eg. Number range ID : ZZ and grouping ID should also be ZZ
In table T77S0, maintain the following combinations
HRALX-PNUMB = 2
HRALX-PSUBG = ZZ
10. Make the following customizing changes in CRM
Transaction code SM30 : Table T77S0
Group Sem Abbr Value Abbr
HRALX HRAC X Activate HR Integration with CRM
HRALX OBPON ON Activate integration between Business partners and Org Units
HRALX PBPON ON Integration between business partners and employees
HRALX OPROL BUP004 Role definition for org unit Business partner
HRALX PPROL BUP003 Role definition for Employee Business partner
HRALX ONUMB 1 Number range assignment for org units
HRALX PNUMB 2 Number range assignment for Employees
HRALX PSUBG ZZ Number range grouping only if PNUMB is not 1.
11. Create Employee Master in R/3. Employee master consists of Infotypes. The mandatory infotypes are Actions, Address, Personal data and Organizational Assignment. You can ignore the remaining. Click on next and dont save the other infotypes.
Transaction code : PA30
12. In R/3 Initial Download : SE38 RHALEINI
Plan version : 01
Object type : P Person (always)
Object ID : Employee ID eg. 1
Receiver Partner no. : YYY
Select further details
You get all the data transfer details
13. In CRM, transaction code PP01 View HR Master objects
You see that the employee 1 has got transferred. To see the corresponding business partner go to the infotype Relationships (the first row)
Screen 2 gives you the business partner ID in CRM
Regards
Rekha Dadwal

Synchronization from vendor to business partner is not active?

Hi there
I am busy performing data migration of business partners and vendor accounts and have hit an issue on the last step of linking the uploaded BP to the uploaded Vendor.
On execution of the transaction FLBPC2 (Link Vendor to Business Partner), it issues the error "CVIV_UI015 Synchronization from vendor to business partner is not active" which I believe is a product error because:
1. I have configured BP to a new internal number range (and all other config requirements)
2. I have configured a new Vendor account group with an external number range which is a duplicate of 1. above
3. I have enabled BP to Vendor synchronisation in "Master Data Synchronisation" (from BP to VENDOR).
I have tested my configuration successfully by creating a business partner via transaction BP and extending him to a vendor in a company code perfectly (works like a charm).
My data migration process includes:
- Creating a business partner using BAPI BUSISB990/FSCREATEFROMDATA.
- Creating a vendor using the external number given above using a recording of FK01.
- Linking the two using a recording of transaction FLBPC2 (Link Vendor to Business Partner).
I am not trying to synchonise a business partner from vendor, but to synchronise the vendor via the business partner (which works using transaction BP) when the issue is received.
Any ideas as to why I cannot do the operation manually which works via automation and why the error is not appriate?
Regards
Joe

Good morning,
I had a similar problem and solved by disabling
the integration of the PI / XI of the PPO.
To make sure that the PPO is working properly.
You can check this setting by BUPA_CALL_FU transaction.
Checks if the items are BUPA_OUTBOUND_MAIN and BUPA_OUTBOUND_REL
integration of the disabled for PI / XI, according to the objects you need to be replicated.
If they are uncheck them and rerun your tests.
Use MDS_PPO2 the transaction log to check the copy of BP
to the Vendor.
I hope it helps, Good luck,

Business Partner Address Template Import

We are importing Business Partner Address Template showing error
"invalid item 'S' in enum 'BoAddressType' oBusiness Partner

USe
bo_ShipTo for ShipTo Address
bo_BillTo for BillTo Address

BDoc Error-Business partner is not a person

HI
We have a error in the BUPA_MAIN Bdoc for only one customer that "Business partner is not a person". What could be reason for this? How this can be rectified?
Thanks
Prince

Hello Varun,
If you want to have as contact Person for relationship XXXX as well organization , that could be an issue. Because in standard it is only forseen that Persons can be assigned as Contact Persons. There for you have to create a Z-Relationship type.
A Group can have a Contact PERSON, but no Contact ORGANIZATION. As stated in standard it is not possible to have an Organization as Contact Person.
thanks

BAPI_BUPA_CENTRAL_CHANGE: Business partner does not exist

Hello,
I'm trying to change a business partner, which I created with BAPI_BUPA_CREATE_FROM_DATA.
But I get the error message "Business partner does not exist"
I do following:
1. create the BP with the BAPI_BUPA_CREATE_FROM_DATA
get the BUSINESSPATNER- number
2. fire BAPI_TRANSACTION_COMMIT.
In the SAP-GUI transaction BUP3 I can see my BP, ok
3. I try to change this BP with BAPI_BUPA_CENTRAL_CHANGE
and I get an error "Business partner does not exist"
Why?
I'm using JCO, I used to set BUSINESSPARTNER with and without leading zero - it doesn't work.
Can some one give me an advice?
Thanks,
Sergej Berg

Hi,
The "VALID_DATE" should be set to the date of execution (at least this is what I'm doing in my system).
If you execute it via SE37 you can give it in the format of DDMMYYYY, but if you are testing an IDOC via WE19 you have to give it in the format of YYYYMMDD.
Enjoy,
Ayal.

CRM Datasources for Activities & Business Partner Address

Hi Experts,
Can you please help in understanding following issue?-
For both these datasources-
1) 0CRM_SALES_ACT_1
2) 0BP_DEF_ADDRESS
I can see huge queue stacked up in CRM side in tcode SMQ1/RSA7.
But delta loads for these datasources bring exactly 1 millions records every day and this is happening since last month.
Even after delta load completes, I don't see corresponding decrease in delta queue entries.
-For second datasource delta queue entries are varying around 21+ million records
-For first one its varying from 5 million entries to 7 million entries
It started happening around the time when people from CRM team loaded data in huge amounts in CMR from other lagacy systems. Historical data loads & conversion in CRM is finished long time back but queues for some cases are still stuck at big numbers.
-->When I double click on queue, following is the status-
"NOSEND"
-->Further double click on it gives following two types of entries-
a) Transaction Recorded
b) Message Edited in Target System
Any helpful responses are welcome.
Thanks,
Arun Purohit

In R/3 you can check
WB2_PARTNER_ADDRESS_CREATE
also confirm in which system u need to create the business partner address.
Additionally you should also check out
BAPI_BUPA_ADDRESS_ADD
BAPI_BUPA_ADDRESS_CHANGE
BAPI_BUPA_ADDRESS_GETDETAIL
BAPI_BUPA_ADDRESS_GET_NUMBERS
BAPI_BUPA_ADDRESS_REMOVE
These may be helpful
Regards
Alok Pathak
Message was edited by: Alok Pathak

Segment Builder: 'Business partner does not exist in target group'

After having built a target group in the segment builder the following error message occurs: 'Business partner does not exist in target group'. What is meant by this error message and what has caused this error?

Hi Mahesh,
Are data sources based in infoset¿? If the are based in infoset u can do simple queries.
I create infoset in t-code 'SQ02', once the infoset has been created u can go to 'Enviroment' --> Queries, and here u can created simple queries based in the infoset. With this tool u can check if this infoset has been created sucessfully.
Hope it helps u.
Regards,
Mon

How to Remove Business Partner Address using DI Server

Hello,
I need to remove Business Partner Addresses using DI Server, the example in the SDK only mentions the remove of the entire business partner, but I need to delete only one of the business partner addresses, how can it be done?

Hi,
the usage of the "UpdateWithSubDeletion" method of B1 object atom might be an option.
You need to update the complete business Partner with the changed amount of addresses.
The usage is tricky, you need to retrieve the BP, which you want to update, first via synchronous retrieval method using import/export mode.
From the retrieval result you should start to update every segment with all fields including the BPAddresses segment in exactly the same sorting order as displayed from the synchronous retrieval.
Best regards
Bastian

Error R1201 "Business partner ### does not exist" with new contact person

Hi,
We have configured CVI masterdata synchronization for Customer<->BP and this is working well for customer masters without contact persons.
However, when we try to add a contact person to an existing customer (or synchronize an existing Customer with contact persons) we get the error message R1201 "Business partner ### does not exist".
I have checked the wiki.
We are able to manually create a Person with role BUP001 (Contact Person) and link it to the BP with relationship cat TBUR001 (Is Contact Person For). Here the synchronization BP->Customer seems to be working, as the new contact person is successfully created in the Customer.
Any ideas why we cannot synchronize Contact Persons, Customer->BP?
Thanks in advance,
JJ23

Hi James,
may i know if you had find a solution for this.
I have same issue.
Thanks in advance
Vijay

Error R1201 Business Partner does not exist (Treasury)

Please could you help.
I have created a Treasury Business Partner using transaction BPC1. When I display using BPC3, the partner exists.
I then create the Transaction Authorisations using TBI6.
However when I try to create a transaction e.g. through TX01, the error message says "R1201 Business Partner does not exist"
Any ideas or advice would be much much much appreciated, and points awarded accordingly.
Thanks in advance

The transaction code to Maintain Business partner is BP. I am not sure in which version you are.
When you create a BP it creates inthe role of Business Partner - Gen - 000000.
In order to create a transaction using a BP, they should exist in the role of Counterparty - TR0151. But since you say that you have maintained TBI6, then I thinkyou should have the BP in the role of counterparty. SO I am not sure what is wrong. If you can send screen shots, I can help.
Send it to my email id [email protected]

Find the SetCurrentLine in Business Partner /Addresses/ billing address

I am using B1 2004.2 B
In this below example:
            oBp.Addresses.SetCurrentLine(0)
            oBp.Addresses.AddressType = BoAddressType.bo_BillTo
            oBp.Addresses.AddressName = "Test1"
            oBp.Addresses.Add()
            oBp.Addresses.SetCurrentLine(1)
            oBp.Addresses.AddressType = BoAddressType.bo_BillTo
            oBp.Addresses.AddressName = "abc"
My requirement is to synchronies the BP master with another database.
I have some issues in Business Partner /Addresses/ billing address.
How to find the SetCurrentLine in oBp.Addresses.SetCurrentLine(XYZ)?
I see a Line number in CRD1 table, is that refers to the line number which I can use in oBp.Addresses.SetCurrentLine(xyz) ?
I tried it but it fails, the line number is based on the order in which the records are displayed in the BP/Addresses/ billing address Screen.
For example:
Address          Linenum
Abc               1
Test1               0
In the above example Test1 is added first and Abc is added second.
So the line number is 0 and 1.
When the records are displayed in BP/Addresses/ billing address Screen,
it displayes Abc first and Test1as second record.
So according to the screen display the Abc is line 0 and test1 is line 1.
But in the database the values are vice versa. So when I want to update the
Values using the DIAPI , I need to know the value for SetCurrentLine(XYZ)
How can I find it?

Line number in CRD1 table has nothing to do with SetCurrentLine.
SetCurrentLine index depends on the order of
the records displayed in BP/Addresses/ billing address Screen, which is sort by
Name.

Business Partner Address not populating

Similar Messages

Maybe you are looking for